Savin 9918DP, 3218 User Manual

Specifications and Main Features

Electrical Specifications: 120V 60Hz, 10 Amperes and above.
Admissible Devise Classification: CDRH class | laser device
Laser Class and Type: GaAiAs laser diode rated at 5 milliwatts, with a wavelength between 760 and 800 nanometers.
Certification: ENERGY STAR qualified devices.
Equipment under Low Energy Consumption:
Copy function only: approximately 60W (power Level 1), approximately 30W (Power Level 2)
For Fax/Printer, when equipped: approximately 74W (Level 1), approximately 50W (Level 2).
For Sleep Mode/ Ready Mode: less Than 36W (not Applicable for copy only).
Automatic Mode: Power Consumption Minimum, factory setting interval of 30 minutes (Not Applicable for a Fax/Printer).
Document Feeder Capacity: A3, 11 inches by 17 inches and more other increases.
Paper Size(s) Recommended: Custom size, A3, A4, B4, B5, 8.5inch 11inch, 11 inch 17inch 8.5inch * 14 inch etc.
Maximum Output Tray Peripherals Capacities:
Internal tray 1: A total of 250 sheets of 80g/m², equal to 20 lb.
Internal tray 2: Stacks of up to125 sheets, similar density as above and in tray 2.

Frequently Asked Questions

Q: What is the recommended or required power source of the device?

A: Minimum requirements specified for the device are 120V 60Hz and 10 Amperes.

Q: What are the specifications for the laser in this device?

A: The component is composed of a laser refinement device that possesses a minimum output power of 5milliwat within the working range of 760 to 800 nanometers.

Q: Is the operating of this device going to incur a high electricity bill?

A: This device is rated as an ENERGY STAR product giving further evidence for its capability to reduce energy consumption while in use.

Q: Are there any restrictions on the type of paper that I can use with this device?

A: The dimensions of the paper are customized and standard including A3, A4, B4, B5 and other types of sizes which can accommodate multiple sizes and formats.