Savin 10502, 8502, 2585 User Manual

2585/8502,25105/10502

Operating Instructions

SYSTEM SETTINGS

Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual.

Note to users in the United States of America

Notice:

This equipment has be en tes ted and found t o com ply w ith the limi ts for a Cl ass B d igital devic e, purs uant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference i n a resid ential instal lation . This e quipm ent gene rates, u ses an d can rad iate rad io frequency energy and, if not instal led and used in accorda nce with the ins tructions , may caus e harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be d etermi ned by turnin g the eq uipment o ff and o n, the u ser is encourage d to try to correct the interference by one more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the recei ver is

connected. Consult the dealer or an experienced radio /TV technician for help.

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

1. Properly shielded and g rou nded c ables and c onnec tors must be used fo r conn ection s to h ost co mputer (and/or peripheral) in order to meet FCC emission limits.

2. AC adapter with ferrite core must be used for RF interference suppression.

This device complies with Part 15 of FCC Rules. Operation is subject to t he following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received,

including interference that may cause undesired operation. Ricoh Corporation, 5 Dedrick Place, West Caldwell, NJ 07006 973-882-2000

Note to users in Canada

Note:

This Class B digital apparatus complies with Canadian ICES-003.

Remarque concernant les utilisateurs au Canada

Avertissement:

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

In accordance with IEC 60417, this machine uses the following symbols for the main power switch:

means POWER ON.

means STAND BY.

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatil ity from this ma chine all opera tors sho uld careful ly read an d follow the ins tructi ons in this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information before using this machine. It contains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes

Some illustrations might be slightly different from your machine. Certain options migh t no t be av ail abl e in some countries. F or de tails, please contac t yo ur local dealer.

Operator Safety:

This machine is considered a CDRH c lass 1 lase r device, s afe for o ffice/EDP u se. The mach ine con tains a GaAIAs four beam laser diodes array, 10-milliwatt, 770-810 nanometer wavelength for each emitter. Direct (or indirect ref lected ) eye conta ct with the laser beam might cause se rious eye damage. Safety precautions and interl ock mecha nisms have bee n designed to prevent any pos sible las er beam exposure to the operator.

Laser Safety:

The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis and laser subsystems to the fac tory or se rvice d epot when replace ment or the op tical subsyste m is required.

Warning:

Use of controls or adjustment or performance of procedures other than those specified in this manual might result in hazardous radiation exposure.

The model names of the machines do not appear in the following pages. Check the type of your machine before reading this manual. (For details, see ⇒ P.2

•Type 1 : 2585/8502

•Type 2 : 25105/10502

Certain types might not be available in some countries. For details, please contact your local dealer. Two kinds of size notation are employed in this manual. With this machine refer to the inch version. For good copy quality, Savin recommends that you use genuine toner. Savin shall not be responsi ble for any damage or expens e that mi ght resul t from the us e of parts ot her

than genuine parts in your office product.

Power Source

• Type 1 : 240V, 60Hz, 10A or more

• Type 2 : 240V, 60Hz, 12A or more

Please be sure to c onnect the power c ord to a po wer sour ce as abo ve. For d etails a bout power source, see “Power Connection” of the “Copy Reference”.

Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual.

“Machine Types”

)

Note to users in the United States of America

Notice:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the recei ver is

connected. Consult the dealer or an experienced radio /TV technician for help.

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

1. Properly shielded and g rou nded c ables and c onnec tors must be used fo r conn ection s to h ost co mputer (and/or peripheral) in order to meet FCC emission limits.

2. AC adapter with ferrite core must be used for RF interference suppression.

This device complies with Part 15 of FCC Rules. Operation is subject to t he following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received,

including interference that may cause undesired operation. SAVIN CORPORATION, 333 Ludlow Street, Stamford, CT 06904 203-967-5000

Note to users in Canada

Note:

This Class B digital apparatus complies with Canadian ICES-003.

Remarque concernant les utilisateurs au Canada

Avertissement:

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

In accordance with IEC 60417, this machine uses the following symbols for the main power switch:

means POWER ON.

means STAND BY.

SAVIN CORPORATION

333 Ludlow Street, Stamford, CT 06904

203-967-5000

ENERGY STAR Program

As an ENERGY STAR Partner, we have determined that this machine model meets the ENERGY STAR Guidelines for energy efficiency.

The ENERGY STAR Guidelines intend to establish an international energy-saving system for developing and introducing energy-efficient office equipment to deal with environmental issues, such as global warming.

When a product meets the ENERGY STAR Guidelines for energy efficiency, the Partner shall place the ENERGY STAR logo onto the machine model.

This product was designed to reduce the environmental impact associated with office equipment by means of energy-saving features, such as Low-power mode.

• Low Power mode This product automatically lowers its power consumption 15 minutes after the last copying or printing job has been completed. Printing is available in this mode, but if you use the copier, press the {

Energy Saver

For how to change the default interval before entering Low Power mode, see “Energy Saver Timer”⇒ P.10 “General Features”.

} key.

• Auto Off mode To conserve energy, this product automatically turns off 90 minutes (Type2:120 minutes) after the last copying or printing job has been completed. Printing is available in this mode, but if you use the copier, press the operation switch. For how to change the default interval before entering Auto Off mode, see “Auto Off Timer”⇒ P.10 “General Features”.

• Duplex Priority To conserve paper resources, the Duplex function (1-Sided → 2-Sided) is selected preferentially when you turn on the operation switch, press the {

} key, or the machine resets itself automatically. To change the Duplex

Saver

Priority mode, see “Duplex Priority” of the “Copy Reference”.

Energy

❖

Specification

Type 1 Type 2

Low Power mode Power consump-

tion

Default interval 15 minutes 15 minutes

Recovery time Less than 40 sec-

Auto Off mode Power consump-

tion

Default interval 90 minutes 120 minutes

Duplex Priority 1-Sided → 2-Sided

312W 320W

Less than 42 sec-

onds

12W 12W

onds

-Recycled Paper

Please contact your sales or service representative for recommended recycled paper types that may be used in this machine.

How To Read This Manual

Symbols

In this manual, the following symbols are used:

WARNING:

This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the “Safety Information” of the “Copy Reference” manual.

CAUTION:

This symbol indicates a potentially hazardous situation that might result in minor or moderate injury or property damage that does not involve personal injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the “Safety Information” of the “Copy Reference” manual.

* The statements above are notes for your safety.

Important

If this instruction is not followed, paper might be misfed, originals might be damaged, or data might be lost. Be sure to read this.

Preparation

This symbol indicates the prior knowledge or preparations required before operating.

Note

This symbol indicates precautions for operation, or actions to take after misoperation.

Limitation

This symbol indicates numerical limits, functions that cannot be used together, or conditions in which a particular function cannot be used.

Reference

This symbol indicates a reference.

[]

Keys that appear on the machine's panel display.

{}

Keys built into the machine's operation panel.

iii

TABLE OF CONTENTS

Manuals for this Machine.......................................................................... 1

Machine Types........................................................................................... 2

1.User Tools (System Settings)

Keys for User Tools (System Settings)................................................... 3

Accessing User Tools (System Settings)................................................ 5

Exiting from User Tools................................................................................. 6

User Tools Menu (System Settings)........................................................ 8

Settings You can Change with the User Tools..................................... 10

General Features........................................................................................ 10

Timer Settings............................................................................................. 15

Tray Paper Settings .................................................................................... 17

Key Operator Tools..................................................................................... 19

INDEX........................................................................................................ 22

Manuals for this Machine

The following two manuals have been prepared for operating this machine: this manual describing how to make system settings for copying functions and the “Copy Reference” manual introducing the operating procedures for copying functions.

❖

System Settings (this manual)

Describes how to access the system User Tools to make the machine easier to use.

❖

Copy Reference

Describes the various copying functions from basic copying to more advanced functions such as reducing/enlarging copies or combining originals into one copy.

+ 21 hidden pages