Savant Systems CRU0200 User Manual

IMPORTANT PRODUCT INFORMATION

CONTENTS

IMPORTANT SAFETY INFORMATION 2

FCC INTERFERENCE STATEMENT 4

INDUSTRY CANADA STATEMENT 6

NEW PRODUCT LIMITED WARRANTY 9

CUSTOMER SUPPORT Back Cover

!

Warning

–

Risk of Electric Shock. Install in accordance with all regional, national, and

local electrical codes.

–

Risk of Serious Injury, Death, or Property Damage or Loss. Install and use

properly

—

as described in this and other product documents—to avoid danger

of injury, death, or property damage or loss.

–

Risk of Serious Injury, Death, or Property Damage or Loss. If you are unsure about

any part of these instructions, consult Customer Service or a qualified dealer.

–

Risk of Overheating. To reduce the risk of overheating and possible damage

to other equipment, install and use properly as described in this and other
product documents.

–

For the Savant Lamp Control: Prior to changing a light bulb or performing any

other maintenance to the light fixture, turn o the lamp controller via the Savant

™

App

or unplug the lamp itself from the Savant Lamp Control.

Caution

–

This product generates heat during normal operation.

–

Charging your device: Please use only the Savant power adaptor and USB

charging cable packed with and intended for use with your Savant product. Other
power adaptors and accessories may damage your device. Do not use a power
adaptor and cable intended for other models of Savant products. Do not use
a power adaptor or cable that has frayed or otherwise been damaged.

2IMPORTANT SAFETY INFORMATION

3

Your Savant product is an electronic/electrical device. Follow the same basic

safety procedures and cautions you would follow with any electrical device.

–

Your Savant device, USB cables, and adaptors are not waterproof. To avoid risk

of electric shock, overheating, melting, burns or other injury or damage, keep
the device and all accessories away from water and other liquids. Do not use the
cable if either end of the cable gets wet or is exposed to liquid spray or excessive
moisture. Do not expose your Savant device, cables, and power adaptor to food
or any liquids, or to wet or damp conditions.

–

Use or modification of this product in a manner not expressly approved by

Savant voids your warranty. Further, Savant is not liable for any damage incurred
with the misuse of this product. See “Limited Warranty.”

Cleaning

–

To clean the outside of your Savant product, please use a dry, soft, lint-free

or micro-fiber cloth to wipe any dust o from the surface of your device. Do
not use any spray or liquid cleaners, or any aerosol sprays, solvents, chemicals,
or abrasives, which may damage the device.

For the Savant Remote only: To clean the touchscreen of your Savant Remote,

first power o the remote and then use a dry, soft, lint-free or micro-fiber cloth
to wipe clean the display. Avoid using any spray or liquid cleaners on the screen.