sauter TVP-L Series,TVP Instruction Manual

Sauter GmbH

Ziegelei 1
D-72336 Balingen
E-Mail: info@

sauter

.eu

Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com

Instruction Manual

TVP

TVP-BA-e-1311 1

Thank you for buying a SAUTER test stand. We hope you
are pleased with your high quality test stand with i ts big
functional range. If you have any queries , wishes or helpful
suggestions, do not hesitate to call our service number.

1. Included in delivery

- SAUTER TVP

- Various hooks

2. Warning

Intended use
The instrument you have acquired serves to determine the
measuring value of the material to be measured. It is
intended to be used as a “non-autom atic“ instrument, i.e.
the material to be measured is manually and carefully
attached at the instrument. The measuring value can be
read off after a stable measuring value has been obtained.

Be careful about the limit load of test stand and force
gauge. Do not go over the maximum force.

3. Technical Specifications

Capacity: up to 500 Newton

Unit net weight: 10,5 kg

Minimum height above base plate: 115 mm

Maximum height above base plate: 318 mm

Height : 420 mm / Length: 233 mm /depth : 150 mm

Dimensions of the base plate:

^

4. Fixture of the measuring instruments

By means of 4 M3 screws

Sauter GmbH

Ziegelei 1
D-72336 Balingen
E-Mail: info@

sauter

.eu

Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com

Instruction Manual

TVP

TVP-BA-e-1311 2

5. Drawing

Dimension in Millimeters (mm)