sauter TG 1250-0.1FN,TF 1250-0.1FN Instruction Manual

Sauter GmbH

Ziegelei 1
D-72336 Balingen

E-Mail: [e-mail]

Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149

Internet: www.sauter.eu

Instruction Manual

Digital Coating Thickness Gauge

SAUTER TF, TG

Version 1.3

01/2018

GB Model TF 1250-0.1FN

Model TG 1250-0.1FN

TF_TG-BA-e-1813

PROFESSIONAL MEASURING

2 TF_TG-BA-e-1813

GB

SAUTER TF, TG

Version 1.3 01/2018

Instruction Manual

Digital Coating Thickness Gauge

Thank you for buying a SAUTER digital Coating Thickness Gauge. We hope you are
pleased with your high quality Thickness Gauge with its big functional range.
If you have any queries, wishes or helpful suggestions, do not hesitate to call our
service number.

Models available:

- TF 1250-0.1 FN

- TG 1250-0.1 FN

Summarize:

1 Features .......................................................................................................... 3

2 Specifications ................................................................................................ 4

3 Front panel description ................................................................................. 5

4 Measurement procedure ............................................................................... 6

5 Statistics ......................................................................................................... 6

6 How to store and recall readings.................................................................. 7

7 How to delete readings .................................................................................. 7

8 Transfer of readings to a PC ......................................................................... 7

9 Calibration ...................................................................................................... 8

10 Battery replacement ...................................................................................... 8

11 Adjustment foils ............................................................................................. 8

12 Correct handling at Coating Thickness Measurement with external

sensors ...................................................................................................................... 9

13 Trouble shooting............................................................................................ 9

14 Restore factory settings ................................................................................ 9

15 Annotations .................................................................................................. 10

TF_TG-BA-e-1813 3

This coating thickness gauge is small in size, light in weight and easy to carry. Al­though it is complex and advanced, it is convenient to operate. Its ruggedness will
allow many years of use if all the instructions are followed carefully.
Please keep this instr uction manual always within reach!

Annotation: It is strongly recommended to adjust the new instrument before
the first use, as described in paragraph 9. By doing this, you will achieve a
much better measurement result right from the start.

1 Features

» This instrument meet s the stan dar ds of both, ISO 2178 and ISO 2361, and DIN as
well as ASTM und BS. It is suitable for the laboratory and for use in `harsh field con­ditions`.

» The F-mode measures the coating thickness of nonmagnetic materials, e.g. paint,
plastic, porcelain enamel, copper, zinc, aluminium, chrome, lacquer layers etc.
These layers should be located on magnetic metals e.g. steel, iron, nickel etc. It is
often used to measure the thickness of galvanizing layer, lacquer layer, porcelain
enamel layer, phosphate layer, copper tile, aluminium tile, some alloy tile, paper etc.

» In N-mode, the coating thickness of non-magnetic coatings is measured which are
located on non-magnetic metals. It is used to measure anodizing, varnish, paint,
enamel, plastic coatings, powder etc. These layers are located on non- magnetic
metals e.g. aluminium, brass, non magnetic stainless steel etc.

» Automatically base material recognition

» Manual or automatical “auto power off” to conserve batteries.

» Two measurement modes: - single and continuous

» Metric/ imperial unit conversion

» Wide measuring range and high resolution

» Digital backlight display enables exact reading with no guessing or errors

» Can store up to 99 measurements

» Statistic function available

» Can communicate with PC for statistics and printing per RS 232. Cable and soft­ware are available as optional accessory (ATC-01).