sauter TB-US,TB-US-red Instruction Manual

Sauter GmbH

Ziegelei 1

D-72336 Balingen

E-Mail: [e-mail]

Tel: +49-[0]7433- 9933-199

Fax: +49-[0]7433-9933-149

Internet: www.sauter.eu

Instruction Manual

Ultrasonic Material Thickness Gauge

SAUTER TB-US, TB-US-red

Version 1.23

08/2017

GB

TB-US-BA-e-1713

PROFESSIONAL MEASURING

2 TB-US-BA-e-1713

GB

SAUTER TB-US; TB-US-red

Version 1.3 08/2017

Instruction Manual

Ultrasonic Material Thick ness Gauge

Thank you for buying a SAUTER digital Ultrasonic Thickness Gauge. We hope you
are pleased with your high quality Thickness Gauge with its big functional range.
If you have any queries, wishes or helpful suggestions, do not hesitate to call our
service number.

Summarize:

1 Features .......................................................................................................... 3

2 Specifications ................................................................................................ 3

3 Front panel description ................................................................................. 4

4 Material selection ........................................................................................... 4

5 Calibration ...................................................................................................... 5

6 Measuring procedure .................................................................................... 6

7 Measuring by velocity setting (not valid for TB 200-0.1 US-red) ............... 6

8 Battery replacement ...................................................................................... 7

Model: TB 200-0.1US

TB-US-BA-e-1713 3

TB 200-0.1US-red

Annotation: Model TB 200-0.1US-red has no free adjustable measurement range.
Only the pre-set materials can be measured. Please only read the adequate sec­tions.

It is strongly recommended to calibrate the new instrument before the first use,
as described in paragraph 5. By doing this, you will achieved a much better
measurement result right from the start.

1 Features

» Wide measuring range and high resolution

» Convenient to measure the thickness of many materials, e.g. steel, cast iron, alu­minium, red copper, brass, zinc, quartz glass, Polyethylene, PVC, grey cast iron,
nodular cast iron.

» Automatic power-off to preserve batteries

2 Specifications

Display: 4 digits, 10mm LCD

Range: 1.5 to 200mm (in 45# steel)

Resolution: 0.1mm/ 0.001inch

Accuracy/ uncertainty of measurement: ± (0.5%n+0.1)

Sound velocity: 500 to 9000m/s

Power supply: 4×1.5V AA (UM-3) battery

Operating conditions: Temperature: 0 to 50°C; Humidity: <80%

Size: 160×68×32mm (5.5×2.8×1.2inch)

Weight: about 208g (not including batteries)

Accessories: Carrying case
Operation manual
Ultrasonic sensor
Ultrasonic coupling gel
4x 1.5V AA batteries