Sauna New Generation User Manual
OWNER'S
MANUAL
The New Generation Sauna In The World!
(15)
(19)
(23)
Dear
Congratulations on your purchase of the sauna, the new generation Sauna in the
world. We are confident that you will enjoy many benefits of using the sauna
for years to come.
Carefully and thoroughly read this manual in its entirety before using the sauna
for the first time. We recommend keeping this manual for regular review and
future reference.
I attribute this growth and success entirely to our customer satisfaction, the recognized health benefits, and the quality of our workmanship. We use only the
best materials coupled with state-of-the-art construction and the highest safety
standard in the industry.
You will be surprised at the noticeable effects on pain relief, weight control,
skin stimulation, and stress reduc tion du e to an increased blood circulation
when using the sauna.
Whatever your needs, we invite you to experience the difference with the sauna: A difference in health benefit, a difference in quality, and a difference in attitude of our team service and support.
The whole team is looking forward to serving your needs.
Customer,
TABLE OF
Conditions of use
Packaging and Individual Panel Information
Installati on Information
Assembly Instruct ions
Digital Control ler Operating Instructions
Oxygen Ionizer Application Guide
Enjoying Your Sauna
Tips for Use
Warnings Sa fety Instructions
Limited Warranty
Frequently Asked Questions
Maintenance
4 Person Model Onl y
Corner Model Only
CONTENTS
PAGE
(1)
(1)
(4)
(4)
(17)
(18)
(20)
(22)
(27)
(28)
(29)
1 2
Conditions of use
1. Temperature from +5℃~+40℃ (+41℉ ~ +104℉)
2. Relative humidity≤85%
3. Depression: 700~1060 hpa
4. Main supply: AC □110V □ 120V □230V □240V
Frequency □60Hz±1 □50Hz±1
General technical characteristics
1. Functions processed by microprocessors
2. Temperature adjustable from 18℃to 60℃
3. Adjustable dwell time from 0 to 60 minutes
4. Digital temperature sensor
5. Soft touch key
6. Long-live ceramic infrared heater
Packaging and Individual Panel Information
The sauna is packed in 2
PLEASE FIND OUT THE SAME NUMBER OF THE CARTON
FOR EXAMPLE: "NO.001 1 OF 2" FIT "NO.001 2 OF 2" on carton
THEN YOU CAN ASSEMBLE OUR SETS
boxes:
BOX.
EASILY.
NO.001
1 OF
2
NO.001
1 OF 2
NO.001
2 OF 2
NO.005
2 OF 2
package.
NOTE: PLS DO NOT MIX PACKAGE (MEANS PARTS FROM
BOXES CAN NOT BE INSTALLED TOGETHER, OR
EXCHANGED).
Parts list of a sauna room
Bottom Panel Top Panel
Bench Panel Bench Heater Panel
Front Panel
Right Side Panel
Accessories
Left Side Panel
Back Panel
Below are pictures of individual panels for the 2-person model.
Othe models vary.
Front Panel Bottom Panel
Top Panel
Back Panel
DIFFERENT
3
4
Side Panel
Left Right
Bench Panel
WARNING!!! The receptacle provided by the manufacturer must be
installed by a qualified electrician only
9
1
13
2
12
3
1. Left Side Panel 2. Digital controll panel 3. Front
4. Bottom Panel 5. Bench Heater Panel 6. Bench
7. Right Side Panel 8. Back Panel 9. Top
10. Oxygen Ionizer 11. Light 12. Cup holder 13.CD
Bench Heater Panel
11
10
12
8
7
6
5
4
Panel
Panel
Panel
Player
Installation Information
a. Do not plug any other appliances into the power socket with your sauna.
b. the sauna should always be placed on a level surface.
d. Do not spray the exterior with water. If the floor is damp, install a
floor separator to keep the sauna high & dry.
e. Do not store flammable objects or chemical substances near the sauna.
Assembly Instructions
Assembly of the sauna requires at least 2 ad ults to complete. Please read
the instructions thoroughly before and during assembly to ensure proper
installation of the unit. If you encounter any problems or have questions
during assembly, please feel free to call our Customer Service or local
dealers.
WARNING!!! We have two installation methods
we'll introduce you to two parts
The frist method: How to install the buckles sauna.
(1) LOCATION OF SAUNA
When determining a location for your sauna, please keep in mind the
following:
1. The Main Power Cord on the sauna must be easily accessible.
2. The location must be dry and leveled.
(2) PLACING BOTTOM PANEL
Place the Bottom Panel on the ground and make sure that the "FRONT"
sticker is facing the direction where the front of the sauna would be.
FRONT
5
6
(3) CONNECTING BACK PANEL TO BOTTOM PANEL
Connect the Back Panel to the Bottom Panel by lining up the Back
Panel on the groove of the Bottom Panel. Align buckles on both panels
and fasten them if applicable.
Keep in mind that the Back Panel will not have enough support from
the buckles alone until the
Buckle Open
Buckle Fastened
(4) CONNECTING SIDE PANELS
Connect the Side Panels to the Bottom Panels by lining up buckles and
fastening them.
1. Each Side Panel has a white label to identify which side it is. The
panel with "LEFT PANEL" label should be placed on the left side
when facing the sauna from the front.
Left Right
(5) INSTALLING BENCH HEATER PANEL
Slide down the Bench Heater Panel by lining up its sides with the
Vertical Guides on each Side Panel.
1. Bench Heater Panel must be positioned so that the "TOP" sticker
is facing up and the heater facing outward.
2. Be careful not to scratch the Side Panels when positioning the
Heater Panel.
(6) PLUGGING BENCH HEATER CABLE
Plug in the Bench Heater Cable to the Outlet located on the Back Panel.
Make sure connection is secure.
7
8
(7) INSTALLING BENCH PANEL
Install the Bench Panel by sliding it over the Horizontal Guides on each
Side Panel. Be careful not to scratch the Side Panels when do ing so.
Make sure to position the Bench so that the "BACK" sticker is facing back,
the smooth and finished sides of the Bench are facing up and forward.
BACK
(8) INSTALLING WOODEN WEB
Screwing the screws of the web back to the back panel .
(9) CONNECTING FRONT PANEL
Place the Front Panel onto the recessed area whe re the "FRONT" sticker is.
Align buckles with both Side Panels and secure in place by fastening the
buckles.
(10) PLACING TOP PANEL
1. Open Sliding Doors located on the Top Panel.
2. Put the Top Panel on the the assembled panels.
The Top Panel must be positioned so that the Cables on the Top Panel are in
the frontleft corner, right above the stereo.
3. Plug the heater wires through the holes around the Top Panel
4. Gently place the Top Panel onto the rest of the assembled pan els. When all
four corners are in place, gently push down the Top Panel until it is snuggly fit
over the rest of the panels.
5. Make sure that the cables around the corners do not get pinched between the
panels.
Loading...