Sauder 418735 Instruction Manual
CONTACT US FIRST
CONTACT US FIRST
sauder.com
sauder.com
sauder.com
BEFORE MAKING ANY RETURNS TO THE STORE.
BEFORE MAKING ANY RETURNS TO THE STORE.
Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a ring at
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
1-800-523-3987.
Here's one for
the books.
Bookcase with Doors
Model 418735
Share your journey!
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-17
Español pg 18-20
Lot # 530075 05/24/19
Purchased: __________________
Table of Contents Assembly Tools Required
Part Identifi cation
Hardware Identifi cation
Assembly Steps
Español
Safety
Warranty
5-17
18-20
21-22
23
3
No. 2 Phillips Screwdriver
4
Tip Shown Actual Size
Hammer
Not actual size
Skip the power trip.
This time.
418735 www.sauder.com/servicePage 2
Part Identifi cation
å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts.
A UPPER RIGHT END (1)
B UPPER LEFT END (1)
C RIGHT END (1)
D BOTTOM (1)
E LEFT END (1)
F ADJUSTABLE SHELF (2)
G
M33
Now you know
our ABCs.
G TOP (1)
H SHELF (1)
I BACK (1)
J SMALL BACK (1)
K DOOR (2)
L LOWER ADJUSTABLE SHELF (1)
M UPPER END MOLDING (2)
M33 TOP MOLDING (1)
M34 BASE MOLDING (1)
M76 SHELF MOLDING (2)
A
I
F
M
M76
F
B
J
H
M76
C
L
M
E
D
M34
K
K
418735www.sauder.com/service
Page 3
Hardware Identifi cation
å Screws are shown actual size. You may receive extra hardware with your unit.
12E
TACK GLIDE - 4
METAL
4G
BRACKET - 6
92K
BACKPLATE - 2
13H
1F
HIDDEN CAM - 12
HINGE - 4
1N
NAIL - 57
22H
2F
HINGE
SPACER - 4
1R
CAM DOWEL - 12
4I
METAL PIN - 12
DOOR
STOP - 2
1G
SAFETY BRACKET - 1
69K
2R
RUBBER SLEEVE - 12
KNOB - 2
1S
BLACK 9/16" LARGE HEAD SCREW - 13
23S
SILVER 5/8" FLAT HEAD SCREW - 8
95S
SILVER 1-1/2" MACHINE SCREW - 2
2S
BLACK 1-7/8" FLAT HEAD SCREW - 5
55S
BROWN 1-5/8" FLAT HEAD SCREW - 3
418735 www.sauder.com/servicePage 4
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Push twelve HIDDEN CAMS (1F) into the ENDS (A, B, C,
å
and E) and BOTTOM (D). Then, insert the metal end of a
CAM DOWEL (2F) into each HIDDEN CAM.
Do not tighten the HIDDEN CAMS in this step.
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/service/tips
2F
(12 used)
Arrow
B
1F
A
E
C
Arrow
D
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
418735www.sauder.com/service
Page 5
Step 2
Fasten the UPPER ENDS (A and B) to the TOP (G).
å
Tighten four HIDDEN CAMS.
Fasten the TOP MOLDING (M33) to the TOP (G). Use
å
three BROWN 1-5/8" FLAT HEAD SCREWS (55S).
NOTE: Do not overtighten the SCREWS into the TOP.
å
55S
BROWN 1-5/8" FLAT HEAD SCREW
(3 used for the TOP MOLDING)
Notched edge
Surface with
HIDDEN CAMS
B
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Curved edge
Rounded edge
M33
G
Notched edge
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Surface without
HIDDEN CAMS
A
Start Tighten
Arrow
Maximum
210 degrees
Minimum
190 degrees
Arrow
418735 www.sauder.com/servicePage 6
Step 3
Slide the UPPER END MOLDINGS* (M) onto the notched
å
edges of the UPPER ENDS (A and B).
*U.S. Patent No. 5,499,886
å
Slide the UPPER END
MOLDING (M) onto
the notched edge.
Just think. The sooner
you do this, the sooner
you do something else.
Notched edge
B
The large
groove is closer
to this edge.
M
A
M
Slide the UPPER END
MOLDING (M) onto
the notched edge.
The large
groove is closer
to this edge.
418735www.sauder.com/service
Page 7
Step 4
Fasten the SHELF (H) to the UPPER ENDS (A and B). Use
å
four BLACK 1-7/8" FLAT HEAD SCREWS (2S).
Push two DOOR STOPS (4I) into the holes in the SHELF (H).
å
4I
B
These holes are
closer to this edge.
A
H
2S
BLACK 1-7/8" FLAT HEAD SCREW
(4 used in this step)
418735 www.sauder.com/servicePage 8
Loading...