Saturn ST-CC7130 User manual

ST-CC7130

STEAM IRON

ПАРОВОЙ УТЮГ

ПАРОВА ПРАСКА

STEAM IRON

Dear Buyer! We congratulate you on having bought the device under trade name “Saturn”. We are sure that our devices will become faithful and reliable assistance in your housekeeping.

Avoid extreme temperature changes. Rapid temperature change (e.g. when the unit is

moved from freezing temperature to a warm room) may cause condensation inside the

unit and a malfunction when it is switched on. In this case leave the unit at room

temperature for at least 1.5 hours before switching it on.

If the unit has been in transit, leave it indoors for at least 1.5 hours before starting

operation.

Purpose:

This is a kind of iron appliance be controlled by Switch, and is suitable for home,

store, hotel, restaurant, etc.

Storage:

When you do not use the product, please clean up the remnants water in appliance and

put it on the suitable and dry place.

Usage after storage:

Please firstly check if the steam pipe and water input and output pipe are blocked or

not. Check if supply cord is damaged or not. If the supply cord is damaged, it must be

replaced by the manufacturer, its service agent or similarly qualified persons in order

to avoid a hazard.

· Temperature limiter

This temperature will operate and shut to the power supply when the temperature

of the heating unit reaches a predetermined value. So it will effectively prevent

the danger caused by excessive temperature.

· Thermal link

When the temperature limiter is disabled and the temperature of heating unit is

indicator lamp

excessive, this thermal link will automatically cut out the main supply source to

avoid the danger.

Caution:

When the product is not useful or is broken, please do not use it and ask the service

from qualified persons.

Security attention:

· Please do not use the product before you read this manual carefully.

· Before usage, drops of hot water can escape from the small steam orifices.

· Handle the device vertically and no horizontally, otherwise drops of water

will escape from orifices.

· Do not to immerse in water or all other liquidates.

· During the usage, take care of the movement of device and do not close to

children.

· Do not introduce any hot water in the container. Otherwise it will cause the

container distortion.

· Pay attention to plug, socket and supply source. Do not draw to unplug.

· If you find some parts are damaged, please contact a qualified technician to

repair. Wrong repair operation can result in damage, fire and electric shock.

· Do not touch the heating unit and steam. Take care to spill the residual water

and prevent the burn by hot water and steam.

· After using, leave the appliance to cool down.

· During non-usage, it is forbidden to remove the steam pipe.

· If the supply cord is damaged, it must be replaced by the manufacturer or its

service agent or a similarly qualified person in order to avoid a hazard.

· It is forbidden to activate the power source before of have introduced water in

order to avoid burning it.

· Do not leave the young children to play proximity device. it does not take

into account the use of appliances by young children or infirm persons

without supervision and playing with the appliance by young children.

· Only for use indoor.

· Care should be taken when using the appliance due to the emission of steam.

· Unplug the appliance during filling and cleaning.

Explanation of the billposting screen and functional keys

This device is a new model of suspended digital steam iron completely managed by

Switch. It can be controlled with the assistance of the switch.

The Switch has indicator lamp.

up and down for

upper pole

5 pole set 1 13 cam 21 Front handle

cover

6 middle pole 1 14 fastener 22 Upper handle

cover

7 up and down for

middle pole 1

8 pole set 2 16 Steam press board

15 basic pole 23 Basic handle

cover

No. Name No. Name No. Name

1 Bracket head 9 middle pole 2 17 Bracket

2 Short peak pole 10 block 18 Bracket spring

3 Upper pole 11 up and down for

19 Aluminum rivet

middle pole 2

12 pole set 3 20 Brush accessories

No. Name No. Name No. Name

1 Top cover 8 Left body 15 Water tank

2 button 9 Big Wheel 16 Power cord

3 Left cover of steam dial 10 Bobbin 17 Direction Wheel

4 Right cover of steam dial 11 Cord bushing 18 Lamp cover

5 Steam pipe button 12 Tube of supporter 19 panel

6 Steam tube fixation 13 bracket pole set 20 Back cover

7 Right body 14 Water-tank handle

Installation

1． Light the suspended steam iron while connecting the supply cable.

3. Unclose the fastener to exert the tub.

4. Press the fastener to be tight.

2. Insert the tube to vertical fixing base, then rotate it clockwise to set up it.

5. Insert the steam knob into base..

6. Install the steam head to superior tube hooking.

The cushion can be damaged

itself with the aging, the

junction interface loosen

Filling the water fill tank

1. Unplug the power cord, and turn the lighted ON/OFF switch to the “OFF”

position.

2. Remove the water fill tank; turn it upside down, and unscrew the valve cap.

3. Fill the water fill tank with cool water, and replace the valve cap.

NOTE: To prolong the lifetime of your steamer, we recommend using distilled or de-mineralized water. NOTE: Do not substitute another water tank for the one designed for this unit.

4. Place the water fill tank on the water reservoir. You should hear water flowing

into the water reservoir for a short time.

CAUTION: Do not let the steamer operate with a dry water fill tank, or damage to the unit could occur.

Quick Storage

1. Turn the ON/OFF switch to “OFF”.

2. Unplug the power cord.

3. Wrap the hose around the telescopic pole one time.

4. Hang the steam nozzle from the steam nozzle holder.

5. Loosen the three fasteners on the telescopic pole

6. Push down on the pole top; the pole will collapse to a compact height.

7. Roll the unit to a convenient storage location.

Cleaning and Long-term Storage

We recommend you follow this procedure at least once per week. Use of distilled or

de-mineralized water reduces the need to clean an prolongs the life of your steam

1. Turn the lighted ON/OFF switch to “OFF”.

2. Unplug the unit from the power outlet.

3. Wait for the unit to cool completely (at least 30 minutes).

4. Remove the hose and the telescopic pole and set them aside.

5. Carry the unit to a sink or tub.

6. Remove and drain the water fill tank. Rinse the water tank with fresh water and

drain completely.

7. Flush the unit by filling the water reservoir and the hose base with fresh water and

draining completely.

8. Place the water fill tank bank on the water reservoir.

9. Reattach the telescopic pole and hose.

10. Follow steps 3-6 of the quick storage procedure above.

Troubleshooting

Problem Cause Solution

The security device does

not work.

A noise originates pipe

of steam but the

produced steam is weak.

Spray head is leaked The head is broken, or the

Hooking connection of

steam pipe is leaked.

One of the circuits has fault,

the plug is loose, the fuse

burned, the LED of supply

source is extinguished.

The pipe is twisted below

level to iron.

ironing is vertical.

Check and maintain by

specialized technician

Raise the steam pipe

(residual water in top

returns into the device).

Replace the spray head.

Move from top down to

operate.

Replace the cushion.

Rotate the junction of

steam pipe tightly.

+ 13 hidden pages