The HDM-IPBX-003CSmart Controller for HDMI over IP series has been tested for
conformance to safety regulations and requirements, and has been certified for international
use. However, like all electronic equipments, the HDM-IPBX-003C should be used with care.
Please read and follow the safety instructions to protect yourself from possible injury and to
minimize the risk of damage to the unit.
● Follow all instructions and warnings marked on this unit.
● Do not attempt to service this unit yourself, except where explained in this manual.
● Provide proper ventilation and air circulation and do not use near water.
● Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
● Use only the power adapter and power cords and connection cables designed for this unit.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
management and real time monitoring over the IP based HDM-IP-004C transmitter and receivers. With
high expandability, a single HDM-IPBX-003C can serve up to 1024 transmitters and unlimited receivers
at once. An intuitive web-based GUI enables users to drag and drop any source to any display, create
presets profile, and schedule the operation for video and power. Plus, HDM-IPBX-003C provides
continuous system monitoring, self-recovery along with real-time event notifications and alerts. Via
cooperate network connection, users can remotely access and activate the system from mobile devices.
Moreover, HDM-IPBX-003C provides a QR code, allowing fast access into system for smart phone or
tablet.
● Control center of the IP-based Transmitter and Receiver (HDM-IP-004C)
● Monitor all devices in one central system
● Cost effective solution for IoT
● Intuitive and powerful user interface
● Include Web interface and mobile support
● Easy installation with auto-detection of transmitter and receiver units in the network.
● Drag-and-drop easy matrix switching
● Schedule time for audio/video mapping, cycle-play and mute/resume
● Watch-dog with self-recovery
● Assign the video sources for each display with account/password submit
● QR code for user to quickly access into the control center with smart phone or tablet.
Smart Controller for HDMI over IP series
provides central
●
1x HDM-IPBX-003C
●
1x DC 5V power supply
●
1x Rack-mounting ear sets
●
1x User Manual
1
SPECIFICATIONS
Model NameHDM-IPBX-003C
PANEL DESCRIPTIONS
1
2
3
4
5
6
1234567
Technical
Role of usageSmart Controller
Input1x RJ-45
Output1x HDMI
HDMI connectorType A [19-pin female]
RJ-45 connectorWE/SS 8P8C
Mechanical
HousingMetal enclosure
Model90 x 65 x 29mm [3.5" x 2.5" x 1.1"]
Dimensions
[L x W x H]
Weight
FixednessRack-mount with ears
Power supply5V DC
Power consumption2A
Operation temperature0~40°C [32~104°F]
Storage temperature-20~60°C [-4~140°F]
Relative humidity20~90% RH [no condensation]
Package198 x 137 x 74mm [7.8" x 5.4" x 2.9"]
Carton420 x 400 x 300mm [1'4"x 1'3" x 11.8"]
Model203g [7.2oz]
Package495g [17.5oz]
Output: HDMI output, it display the information of controller
RJ-45: Ethernet control port
USB: Reserved
Signal indicator LED
Power indicator LED
+5V DC:+5V DC power jack
2
CONNECTION WARRANTY
3
OPERATION APPROACH
Installation Setup
Connect a Laptop/PC, HDM-IPBX-003C into the IP Switch/ Router/ Hub
Ensure your IP Switch enables DHCP Server
*
Open the Network and Sharing Center and enter the Change adapter settings page
Select the Local Area Connection item and click the right button to enter the Properties page.
4
Installation Setup
Enter the Properties of Internet Protocol Version 4 (TCP/IP)
IP Setting as following:
5
View HDM-IPBX-003C information
Connect HDM-IPBX-003C HDMI output to display.
The display will show information, as below image.
The default IP is DHCP (obtain an IP address automatically)
*
The QR code allows quick access into Web
*
User Interface pages
Login
Open the browser and enter the IP address of HDM-IPBX-003C.
Account: admin
•
Password: admin
•
6
Connect the HDMI over IP extenders to the Router/Ethernet Hub
1
2
3
4
5
6
7
1
3
5
2
4
6
7
Mapping
l
Schedule
Event
l
l
Access
Setup
l
l
Log
Smart Controller
l
1. Mapping
In this Page, you can see runtime status of all TX/RX device in controller. The way to do input/
output mapping is to drag TX icon to RX icon. It also provide 10 prole spaces to save the
frequent-used scenarios into the device. Clicking the prole button to preview the scenarios
which you are saved.
7
2. Schedule
User can schedule the operation for video and power. Just click the button to setup the time,
type and action.
3. Event
User can set up the condition of trigger point in advance.
Event happens, then HDM-IPBX-003C will take Action for self-recovery, real-time notication
and alert.
8
4. Access
Allow admin to assign video sources for each display, with Account / Password submit.
5. Setup
After connecting the HDMI over IP transmitter and receiver units to the Router/Ethernet Hub,
the HDM-IPBX-003C will automatically add the device into the control system. More TX and
RX information will display here, allowing advanced setting (A/V setting/Reboot/HDMI Reconnect/Blink LED).
9
6. Log
This page contain a text log of your system operation history.
7. Smart Controller
Enter the Smart Controller page to do advance setting.
Account: admin
•
Password: admin
•
The home page of Smart Controller shows the system information.
10
WARRANTY
The SELLER warrants the HDM-IPBX-003C Smart Controller for HDMI over IP series
free from defects in the material and workmanship for 1 year from the date of purchase from the
SELLER or an authorized dealer. Should this product fail to be in good working order within 1
year warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit
has not been subjected to accident, disaster, abuse or any unauthorized modications including
static discharge and power surge. This warranty is offered by the SELLER for its BUYER with
direct transaction only. This warranty is void if the warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the current price
of parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from
the day of reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure
the unit or assume the risk of loss or damage in transit. Under no circumstances will a unit be
accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without
limitations, any other implied warranty or tness or merchantability for any particular purpose, all
of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are
responsible for shipping charges to and from the SELLER. Cables and power adapters are
limited to a 30 day warranty and must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate.
However, The SELLER assumes no responsibility for any inaccuracies that may be contained
in this manual. The SELLER will NOT be liable for direct, indirect, incidental, special, or
consequential damages resulting from any defect or omission in this manual, even if advised of
the possibility of such damages. Also, the technical information contained herein regarding the
HDM-IPBX-003C features and specications is subject to change without further notice.
11
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.