UPC
User’s manual
Thermal Camera Core
Trademark Acknowledgments
• SATIR is a trademark of SATIR Ltd.
• Other names and products not mentioned above may be registered
trademarks or trademarks of their respective companies.
Copyright © 2017 SATIR Ltd. All rights reserved.
We are very grateful for using our product, please read the manual
carefully before using the camera. It will provide the correct illustration
for you to install and use.
Copyright statement:
SATIR Ltd. owns the copyright of this user’s manual. Without
approve of SATIR, any organization or individual have no right to copy
and reprint any part of it.
SATIR reserves the right to change the functions and
configurations of our products without prior notice.
If you have a problem, which is not mentioned in the manual
during the process of using the camera, please contact us or your
authorized agent.
You can visit our website www.satir.com to get the latest
information for more products.
Contents
1 Reading this first ........................................................................................... 1
1.1 Safety precautions .............................................................................. 1
1.1.1 Warning .................................................................................. 1
1.1.2 Caution ................................................................................... 2
1.2 Prevent malfunction ........................................................................... 3
1.3 Maintenance and Support .............................................................. 3
2 Preface ............................................................................................................. 4
3 Introduction ....................................................................................................... 5
4 Module introduction ........................................................................................... 6
4.1、Main camera ................................................................................... 6
4.2、Optional lenses............................................................................... 6
4.3、Control box ...................................................................................... 6
5 Structure and Function....................................................................................... 7
5.1 Main structure ................................................................................... 7
5.1.1 Detector type ........................................................................ 7
5.1.2 Housing ................................................................................. 7
5.1.3 Power system ....................................................................... 8
5.1.4 Video out ............................................................................... 8
5.1.5 Control box ............................................................................ 9
5.1.6 Combination control port ................................................. 10
5.2 Function parameters .................................................................... 10
5.2.1 Structure and Appearance............................................... 10
5.2.2 Video format ....................................................................... 10
5.2.3 Communication ................................................................. 11
5.2.4 Image quality ..................................................................... 11
5.2.5 Consumption and Startup time ....................................... 11
6 Menu option ................................................................................................... 12
6.1 Menu interface ................................................................................ 12
6.2 Temp measurement menu .......................................................... 14
6.3 Non-temp measurement menu ................................................... 16
7 Installation ...................................................................................................... 18
7.1 Requirements for installer ........................................................... 18
7.2 Tool .................................................................................................. 18
7.3 Start installation ............................................................................. 18
7.3.1 Main camera ...................................................................... 18
7.3.2 Lens installation ................................................................ 19
8 Operating environment ................................................................................... 20
8.1 Storage temperature .................................................................... 20
8.2 Operating temperature ................................................................. 20
8.3 Working humidity .......................................................................... 20
8.4 Encapsulation standard ............................................................... 20
9 Manufacturer Details ....................................................................................... 21
Specifications .................................... Error! Bookmark not defined.
1
1 Reading this first
1.1 Safety precautions
1.1.1 Warning
1、 Before using the camera, please ensure that you read and
understand the safety precautions described below. Always
ensure that the IR camera operate correctly.
2、 The safety precautions noted on the following pages are intended
to instruct you in the safe and correct operation of the IR camera
and its accessories to prevent injuries or damage to yourself, other
persons and equipment.
3、 Use only the recommended power accessories. Use of power
sources not expressly recommended for this IR camera may lead
to overheating, distortion of the IR camera, fire, electrical shock or
other hazards.
4、 Do not attempt to disassemble or alter any part of the equipment
that is not expressly described this guide
5、 The power matched with IR camera should satisfy manual criterion.
Please contact our agent or us if you are not sure about the
installing power.
6、 Stop operating immediately if it emits smoke or noxious
fumes .Failure to do so may result in fire or electrical shock.
Immediately turn the IR camera’s power off, remove the IR camera
battery or unplug the power cord from the power outlet. Confirm
that smoke and fume emissions have ceased.
7、 Stop operating immediately if it dropped or the casing damaged.
2
Failure to do so may result in fire or electrical shock. Immediately
turn the IR camera’s power off, remove the IR camera battery or
unplug the power cord from the power outlet.
8、 Do not use substances containing alcohol, benzene, thinners or
other flammable substances to clean or main the IR camera. The
use of these substances may lead to fire.
9、 Do not handle the power cord if your hands are wet Handling it with
wet hands may lead to electrical shock. When unplugging the cord,
ensure that you hold the solid portion of the plug. Pulling on the
flexible portion of the cord may damage or expose the wire and
insulation, creating the potential for fires and electrical shocks.
10、 Do not install camera to the unstable wall and support arm, or
it could lead to injury of people and camera.
11、 Please contact us immediately if you meet situations as
follows:
a. The power or control line damaged.
b. Using the wrong voltage and type of power.
c. Cause damage when dropping the camera.
d. The camera occurs functional problems.
e. The camera still working wrong after operating properly as user
manual.
Warning: Do not aim the IR camera directly into the sun or at other
intense heat source, which could damage the detector of the IR
camera.
1.1.2 Caution
1、 Please avoid strong vibration, heavy pressure and soaking. Or it
would damage the camera.
2、 If you want to change the location of the installed camera, please
make sure turn off the power before start.
3、 Please install camera in a well-ventilated circumstance.
4、 If the camera work abnormally, please contact us, do not dissemble
or alter camera in any ways. Manufacturer has no responsibility for
3
the problem that caused by the unauthorized alter or maintain.
5、 When installing in outside, please take effective actions to prevent
camera from water, humidity and dust.
1.2 Prevent malfunction
Avoid damaging the detector of the IR camera, please read contents
carefully as follows:
1、 Avoid Condensation Related Problems
Moving the IR camera rapidly between hot and cold temperatures
may cause condensation (water droplets) on its external and internal
surfaces.
You can avoid this by placing the IR camera in the plastic case (bundle)
and letting it adjust to temperature changes slowly before removing it
from the case.
2、 If Condensation Forms Inside the IR Camera
Stop using the camera immediately if you detect condensation.
Continue to use may damage the IR camera. Wait until moisture
evaporates completely before resuming use.
3、 Storage For a Long Time
Please put the camera into a shady and dry condition when without
operating for a long time.
1.3 Maintenance and Support
For more maintenance and other after-sale service, please refer
to the random guarantee card.
4
2 Preface
Thermal imaging detection technology has been imperative means to
guarantee the safety of industrial production in developed countries. It
is used mainly in many fields such as electrical system, metallurgy,
petrochemical industry, machinery, coal, transportation, firefight,
security, etc. During continuous production task in company, we can
apply thermal imaging detection technology to detect device located
in danger so that avoid stopping procedure of manufacturing and
design. Comparing with the traditional detection method, it is no doubt
that the technology has turned a new leaf in the history of detection
industries.
Thermal imaging technology used widely in all kinds of industries as
follows:
● Detection of electric devices and power transmission line
● Detection of hidden fire in fire fight work
● Rescue and command in fire spot
● Heat leakage and heat analysis of heat channel or heat insulation.
● Heat malfunction locating in an operating train.
● Heat analysis in electronic industry.
● Security surveillance at night in security department.
5
3 Introduction
SATIR Universal Purpose Core (UPC) is an uncooled long wave
thermal imager core which is highly modular design for thermal product
OEMs or integration with their existing products/systems. With the
multiple optional solutions, image processing and the standard video
output, UPC can be easily integrated in the existing surveillance &
security cameras or CCTV systems, robots, UAVs and vehicles.
SATIR UPC is composed of three parts: the main camera, control
box and optional lenses. It provides high-quality infrared thermal image
signal, analog video output and selectable lens matched with different
field of view. It is also simple to installing and operating.
6
4 Module introduction
4.1、Main camera
It turns the thermal radiation into visual infrared images, and
realizes relevant function. Its internal structure is consisted of UFPA
detector and processing main board. The system is designed with a
housing which meets IP40 (optional to IP54) encapsulation standards.
4.2、Optional lenses
It collects radiation coming from target and focuses that on the
detector. According to different field of view, lenses can be classified as
two types: telephoto lens and wide-angle lens. The former can focus
long distance and has a narrow FOV, while the later has a wide FOV but
only focus shorter.
4.3、Control box
The control box is the connection between UPC and external device.
Its function is to divide multifunctional port of UPC into each single
output: power input, video output, COM port (RS232), meanwhile it also
can control the menu settings in UPC.
7
5 Structure and Function
5.1 Main structure
Inside: detector, Main board, other component,
Outside: housing, Connection port, control box.
5.1.1 Detector type
UFPA, uncooled microbolometer, Spectral range: 8~14um,
resolution 160*120, 25um, NETD:80mk@30℃
resolution 384*288, 25um, NETD:50mk@30℃
resolution 640*480, 17um, NETD:60mk@30℃
5.1.2 Housing
Front view Vertical view
8
Side view Button view
Back-end view
Connector：
Multifunctional port
5.1.3 Power system
DC 8-12V
5.1.4 Video out
Analog video output
9
5.1.5 Control box
Keypad definition:
1. Enter: pop out the menu, and save modified settings.
2. C/A: If no menu, click it to calibrate camera; if under menu, go
back to previous menu level without saving.
3. Down: moving menu items/value down.
4. Right: moving menu items/value right.
5. Enter + C/A: turn the Down/Right definition to Up/Left.
6. After modified all settings, go to the version menu, and click
Enter key to save all settings in UPC that will keep all settings after
reboot UPC.
7. After setting Center/tracking spot, click Enter the save setting,
and the click Enter again to pop out the spot.
10
5.1.6 Combination control port
RS232, transfer and control commands
Interface
Port
RS232
Baud rate
9600bps
Start bit
1bit
Date bit(hex)
8 bit
Stop bit
1 bit
Parity bit
N/A
Manual control commands:
On
FF 01 00 03 00 5F 63
Off
FF 01 00 03 00 5E 62
Up
FF 01 00 08 00 04 0D
Down
FF 01 00 10 00 04 15
Left
FF 01 00 04 00 04 09
Right
FF 01 00 02 00 04 07
Enter
FF 01 02 00 00 00 03
Esc
FF 01 04 00 00 00 05
5.2 Function parameters
5.2.1 Structure and Appearance
Each module should install stable and has no loose movement.
The surface of housing should be clean and bright without scratches.
5.2.2 Video format
PAL or NTSC video
11
5.2.3 Communication
Control signal transmission
5.2.4 Image quality
The image should not involve abnormal phenomenon as follows:
Image shadows, Horizontal stripe interruption, Oblique stripe
interruption, Dispersive focusing, etc.
5.2.5 Consumption and Startup time
Under normal condition：≤3W Startup time：≤5s
12
6 Menu option
As a new generation of infrared core product, SATIR UPC
possesses kinds of pseudo-color modes on the base of temperature
measuring function, and contains many characteristics of temperature
measuring and surveillance & security products. It has two types of
menu option: temperature measurement menu; Non-temperature
measurement menu.
6.1 Menu interface
Temp-measurement menu interface：
Max/Min temp tracking spot：Tracking the max/min temp spot on full
screen and showing a cross cursor on the spot as a marker. The value
of max/min temperature present in the top right corner of screen. It
allows only one max/min temperature tracking spot;
Center spot：Measuring the temperature of center spot on entire
screen and showing a cross cursor on it. The value of max/min
temperature present in the top right corner of screen. It allows no more
than one center spot;
Isotherm：Realizing the isotherm analysis on full screen, it contains
three factors: the high temperature, low temperature and isotherm width.
Users can use some color (Green/Red/Black/White) to indicate a
temperature range that belongs to the setting width from the low temp to
high temp. It allows no more than one isotherm analysis;
As shown in below picture:
13
Menu model as shown in below picture (other menu options are similar
to this model, more details presented in following menu excels):
Non-temp measurement menu interface
It just contains image ongly, not includes analysis functions of
temp-measurement menu. As shown in follows (menu model are similar
Max-temp
tracking spot
Max-temp value
Center spot
Isotherm width
Temp-measurem
ent bar
14
to temp-measurement menu):
6.2 Temp measurement menu
Analysis option:
Analysis
Image
Setup
System
information
Center Spot
Off
On/Off
Tracking Spot
Off
Max/Min/Off
Isotherm
Off
On/Off
Emissivity
1
0.01~1
Distance
1 m
1~500m
Ambient
Temperature
25℃
- 60 ~ 5000℃
Humidity
50%
0 ~ 100%
Reflect
Temperature
25℃
- 60 ~ 5000℃
Illustration:
Default
Contents
15
Image option:
Analysis
Image
Setup
System
information
Palette
Iron
Iron/Rainbow/Feather/White
hot/Black hot/Iron Inverted
AGC
Level and Span
Level and Span/ Level/ Span/Off
Continuous AGC
Off
Off/Level and Span/ Level
Shutter Period
Normal
Off/Short/Normal
DDE
0
0~15
Level
25.2 ℃
-40℃ ~ 270℃/180℃ ~ 620℃
Span
8.0 ℃
1℃ ~ 270℃/4℃ ~ 400℃
Range
-20℃~+250℃
-20℃~+250℃/+200℃~+600℃
Zoom
x1
x1/2/4
Illustration:
Default
Contents
Setup option:
Analysis
Image
Setup
System
information
Language
English
Chinese/English
Video Output
PAL
PAL/NTSC
Temperature Unit
℃
℃/℉
Distance Unit
Meter
Meter/Feet
Alert
Off
On/Off
Alert Temperature
30℃
30℃
Correct Temperature
0℃
0℃
Isotherm Width
5℃
5℃
Isotherm Color
Green
Green/Red/Black/White
Illustration:
Default
Contents
16
System information:
Analysis
Image
Setup
System
information
Serial Number
UPC XXXXXX
Produced On
YYYY.MM.DD
2015.06.01
Version
1.0.0
1.0.0
6.3 Non-temp measurement menu
Image option:
Image
Setup
System information
Palette
Iron
Iron/Rainbow/Feather/White
hot/Black hot/Iron Inverted
AGC
Brightness and
Contrast
Brightness and Contrast/
Brightness/ Contrast/Off
Continuous AGC
Off
Off/Brightness and Contrast/
Brightness
Shutter Period
Normal
Off/Short/Normal
DDE
0
0~15
Brightness
6
0~15
Contrast
5
0~15
Zoom
x1
x1/2/4
Illustration:
Default
Contents
Setup option:
Image
Setup
System information
Language
English
Chinese/English
Video Output
PAL
PAL/NTSC
Illustration:
Default
Contents
17
System information option:
Image
Setup
System information
Serial Number
UPC XXXXXX
Produced On
YYYY.MM.DD
2015.06.01
Version
1.0.0
1.0.0
18
7 Installation
7.1 Requirements for installer
1. Read and understand the manual completely.
2. Possess basic knowledge and operate skills in the field of
electronic layout and electronic connection.
3. Possess certification of CCTV installation and maintenance. And
the installer must own relevant qualification (working aloft).
4. Installer must possess basic knowledge and skills of CCTV
components.
7.2 Tool
Straight/cross screwdriver
7.3 Start installation
Two main parts: 1. Main camera, 2. Lens
7.3.1 Main camera
See below pictures: use universal screw to mount the camera
19
Main camera
7.3.2 Lens installation
See the below picture, point the lens direct to the camera. Plug in,
and turn in clockwise direction. Focus to target, and lock the lens with
the screw.
20
8 Operating environment
8.1 Storage temperature
-40°C to +70°C (-40°F to +158°F)
8.2 Operating temperature
-15°C to +50°C (5°F to 122°F)
8.3 Working humidity
≤95%，uncondensed
8.4 Encapsulation standard
IP40
21
9 Manufacturer Details
22
SATIR UPC specifications：
Type
UPC80
UPC160
UPC384
UPC640
Imaging performance
FOV/Minimum
Focus distance
51.6°x38.7°
/0.3m
38.2°x28.6°
/0.3m
16.3°x12.2°/0.
3m
48°
x36°/0.3
m
Thermal
Sensitivity(NET
D)
100mK@30°C,
#F1.0
60mK@30°C
, #F1.0
50mK@30°C,
#F1.0
50mK@
30°C,
#F1.0
Detector type
Focal Plane Array (FPA), uncooled microbolometer
Resolution
80 x80
160 x 120
384 x 288
640 x
480
Spectral range
8-14um
Focus
mechanism
Fixed lens
I.F.O.V
9.5mrad
2.4mrad
0.89mrad
1.3 mrad
Measurement [3]
Temperature
Range
-20°C~+250 °C (-4°F ~+ 482°F), up to 600 ℃ /1112°F
(optional)
Accuracy
±2°C Or ±2% Of Reading
Measurement
tools
Center spot, auto hot/cold spot, isotherm
Temperature
Alarms
Yes
Set-up Controls
Language/ Palettes/Units
Measurement
Corrections
Ambient Temperature/ Emissivity Correction/ Distance/
Humidity
Environmental
Operating
-15°C to +50°C (5°F to+ 122°F)
Storage
-40°C to +70°C (-40°F to +158°F)
Humidity
95% relative humidity, non-condensing
Encapsulat
ion
IP40
Physical Characteristics [Camera body only]
Weight
145g
Dimension
s
43.5mm*45.5mm*52.3mm
23
Interfaces
Power input
DC 8-12V output to camera
Video output
Output the composite video in NTSC@60Hz/PAL@50Hz
format
RS232
Controlling and setting
Optional Parts
Optional Lens
[2]
3mm:
51.6° x38.7°
Customized
6mm：
38.2° x28.6°
Customized
6.8mm:
46.6°x34.9°
10mm: 30°x22°
19mm: 16°x12°
35mm: 9°x7°
Customized
9mm:
73° x
53.5°
13mm:
48° x36°
25mm:
24° x
18°
Customi
zed
DRI Range [Human size: 1.7m x 0.6m][1]
Detection
275m
Recognition
70m
Identification
46m
Note:
[1] Data base on the 384*288 camera with 19mm standard
lens.
[2] Different lenses will cause different size and weight of whole
camera.
SATIR reserves the right to change the functions and configurations of
our products without prior notice.
Loading...