Satechi Bluetooth Wonder Wireless Stereo Receiver Headset User Manual

USER GUIDE
USER GUIDE
Product Overview
The BT Wonder Stereo Headset contains the following components and functions:
- Multi-Function (MF) Button
- USB Charging Jack (with cable)
- Play / Pause button
- Previous Track button
- Next Track button
Charging the headset
Your headset uses a rechargeable battery. You must charge the battery completely before its first use. Please ensure that the headset is turned off before charging.
1. Plug the USB charging cable into the port of the headset
2. The red indicator light will remain solid when charging.
3. A full charge will take approximately 2-3 hours.
4. The indicator light will be appear blue on a full charge.
Turning the headset on/off
Turning on: press and hold the MF button until a beep sounds and the blue indicator light flashes Turning off: press and hold the MF button until a beep sounds and the blue indicator light flashes twice
- Headphones
- Earbuds
- Indicator Light
- Volume Down button
- Volume Up button
12
Pairing with your Bluetooth phone
1. For best performance, the Bluetooth headset should be within a few feet of your Bluetooth phone.
2. Ensure that the headset is off.
3. Press the MF button until the blue indicator light appears a solid blue.
4. Allow your Bluetooth phone to discover the headset (refer to your phone’s user guide). Typically, this can be adjusted in the “settings” option of your phone.
5. Your phone will now attempt to find the headset and will ask if you want to pair it. Confirm the pairing.
6. When asked, enter the passcode “0000” and confirm
IMPORTANT If pairing is successful, the indicator light will flash blue 10 times rapidly before going into flashing every 3 seconds. If pairing is unsuccessful, the light remains on and you will need to reattempt the pairing. The light will turn off if the pairing time takes longer than 60 seconds - in this case, you will need to turn off the headset and turn it on for pairing again.
Disconnecting the headset from your phone
If you want to disconnect the headset from your phone, you may do one of the following:
- Turn the headset off
- Remove the headset from the Bluetooth list on the phone
- Move the headset away from the phone for a dista nce of more than 30 feet
Reconnecting the paired headset with your phone
If you want to connect the paired headset with your mobile phone, do one of the following:
- Turn the headset on and select the headset on the Bluetooth list of your phone
- Press the MF button on the headset once (automatic pairing must be activated in your phone)
Answering a call
When you hear a phone call through the headset, press the MF button once to pickup. If you prefer answering a call through your phone without the headset, you can transfer the call from the headset to your phone.
Ending a call
Press and release the MF button once to end the call or hang up from your phone’s keypad.
Answering or rejecting a call when listening to music
If there is an incoming call when you are listening to music from your phone or other Bluetooth device, press the MF button to answer the call or press and hold for 2 seconds to reject the call.
Pause or put a call on hold
During a phone call, press and hold the MF button for 2 seconds to put a call on hold. Press and hold the MF button again for 2 seconds to resume (subject to the phone’s ability)
3
Redialing the previous number
Press and hold the MF button for 2 seconds until a long beep sounds.
Playing music
When listening to music, press the button to play or pause a track. To skip to the next track press the button and to skip to the previous track press the button.
Volume Control
Press the button to increase the volume; press the button to decrease the volume.
4
Loading...