Page 1
Installation Instructions
ITEM NO. :
62/871. 62/872. 62/873. 62/874. 62-875. 62-876
1. Shut off main power at circuit breaker before attempting to install
luminaire.
2. Install mounting plate to junction box in ceiling using mounting
screws.
3. Secure the two screws to the mounting plate. You should leave the
proper length of the two screws beyond the surface of the mounting
plate to ensure enough thread is available to properly mount the
canopy with the Mounting Screws.
4. Pull the existing electrical wires out of the junction box and make
proper connections using wire nuts.
5. Position canopy over mounting plate and align holes in canopy with
mounting screws . With thread protruding through canopy surface,
thread and secure four screws.
INSTALLATION
Use UL listed wire connectors for connections.
WARNING
Turn off the main power at the circuit breaker
before installation,replacing lamp or maintenance.
Installation must be performed by a qualified
electrician.
To ensure the success of the installation,be sure
to read these instructions and review the diagrams
thoroughly before beginning.
J-Box
Wire nuts
Canopy
Mounting Plate
Loading...