SAS Bazooka TA850C,Bazooka BTA850FH Installation Manual
TA850C BTA850FH
Dear Friend,
Thank you for selecting Bazooka
®
subwoofer speaker systems for your
stereo system. Today, the Bazooka represents Bazooka Mobile Audios
continued commitment to efficiency and design. An innovative
manufacturing process developed by SAS
®
for the Bazooka provides
consumers with state-of-the-art speaker system design.
At SAS, we take pride in manufacturing the most revolutionary bass speaker
ENGLISH
systems ever created, featuring our patented Bass Tubes
®
enclosure design,
and we hope you will take pride in owning them.
Several years ago, we realized that efficiency was the wave of the future
in Autosound, so we made a commitment to design, manufacture, and
deliver the most efficient speaker systems possible.
Today we market our patented speaker systems worldwide and the high
quality of the Bazooka brand is well respected by consumers and dealers
of all nationalities.
When properly installed, Bazooka subwoofer speaker systems will give
you years of clean uninterrupted sound reproduction. Therefore, I urge
you to take a few minutes of your time to review this instruction booklet.
It was designed to give you a better understanding of our products and
to explain how to apply them properly.
Thank you again for choosing Bazookas. Our early commitment to quality
has made them the product of choice, and I am sure you will agree that
you have made the right one! Enjoy!
Sincerely,
JON C. JORDAN
President
SAS/BAZOOKA
1
CONTENTS
HELPFUL HINTS BEFORE YOU BEGIN PG 3
VEHICLE PLACEMENT RECOMMENDATIONS PG 4
MOUNTING THE BAZOOKA PG 5-7
WIRING DIAGRAM PG 8
SPECIFICATIONS PG 9
WIRING PG 10-12
TROUBLESHOOTING PG 13-14
WARRANTY PG 15-16
ENGLISH
2
HELPFUL HINTSBEFORE YOU BEGIN
Please take time to read through this manual and plan out your
installation before you begin!
Locate an area in the rear of the vehicle where you would like to place
the Bazooka speaker systems. The location you have selected must
meet the following requirements in order for the Bazooka to be properly
installed in the vehicle:
ENGLISH
1) The woofer (grill end) should be facing into a corner. (See
vehicle placement recommendations on pg. 5-6)
2) Ideally, there should be 2 to 4 inches between the woofer and
the corner it is pointing into.
3) The mounting area should be carefully checked to be sure
that the mounting screws will not damage the gas tank,
electrical wiring, fuel lines, or the spare tire during the mounting
of the strap bases.
4) The strap mounting bases should be screwed securely to a
rigid surface that is part of, or anchored to, the structure of
the vehicle.
3
VEHICLE PLACEMENT RECOMMENDATIONS
TRUCK INSTALLATION
tube size is exaggerated for emphasis
HATCHBACK INSTALLATION
tube size is exaggerated for emphasis
ENGLISH
SEDAN INSTALLATION
tube size is exaggerated for emphasis
4
MOUNTING THE BAZOOKA
Figure 1
ENGLISH
Logo
should
face up
1. With the topside of the buckle facing up (see figure 1), lace the strap
through the mounting base as illustrated in figure 2
To p
Figure 2
2. After the strap is completely laced through the mounting base, make
a loop with the strap, where it runs across the middle of the base as
illustrated in figure 3. This loop is necessary to access the two mounting
holes in the base.
Figure 3
5
Loading...