– Top Performance
– Intuitive Operation
– Ergonomic Draft Shield
– Automatic Internal Adjustment
– Real-Time Level Support
Product Information
Secura® gives you the security and peace of mind of knowing that you have done everything right. Besides providing
highly accurate weighing results and operating convenience, Secura
complete reliability and regulatory compliance – the safe and secure way.
Real-time guidance prompts for leveling, automatic internal adjustment and 100% traceable, clear documentation
with sample and batch identifiers make your lab work more efficient.
First, the new operating concept of Secura
its APC function – Advanced Pharma Compliance – will relieve you from tedious and time-consuming documentation
and monitoring tasks.
®
will noticeably ease your daily workload during weighing and, second,
®
also features built-in protection systems for
Laboratory Balances
Technical Specifications
AC Adapter
Sartorius AC adaptor module 6971790 with interchangeable
country-specific plug-in AC
adaptors
Primary100 – 240 V~, –10% | +10%,
50 – 60 Hz, 0.2 A
Secondary15 V DC, ± 5%, 530 mA (max.) |
8 Watt (max.): 0 to +40 °C and
15 V DC, ± 5%, 330 mA (max.) |
5 Watt (max.): 0 to +50 °C
Other dataprotection class II, in accordance
with EN | IEC 60950-1 up to
3000 m above sea level;
IP40 as per EN | IEC 60529
Balance
Power supplyonly via Sartorius AC adaptor
module 6971790
Input voltage12.0 ... 18.0 V DC
Power consumption2.0 W (typically)
4.5 W (typically), only for 225D-1x,
125-1x and 324-1x
Ambient Conditions
The specifications apply when the following ambient conditions
are in place:
Environmentfor indoor use only
Ambient temperature*+10 °C to +30 °C
Operational capacityguaranteed between +5 °C and
+45 °C
Storage and shipping–10 °C to +60 °C
Elevationup to 3000 m above sea level
Relative humidity**15% to 80% for temperatures
up to 31 °C; non-condensing,
decreasing linearly to 50% relative
humidity at 40 °C and 20% at 50 °C
Safety of electrical
equipment
in accordance with EN 61010-1/
IEC 61010-1. Safety requirements
for electrical equipment for mea
surement, control, and laboratory
use – Part 1: General requirements
Electromagnetic
compatibility
in accordance with EN 61326-1/
IEC 61326-1. Electrical equipment
for measurement, control, and
laboratory use – EMC requirements
- Part 1: General requirements
Defined immunity to
Suitable for use in industrial areas
interference
Interference emissionClass B (suitable for use in
residential areas and areas that
are connected to a low voltage
network that also supplies
residential buildings).
The device can therefore be
used in both areas.
Balances verified for use in legal metrology comply with the
requirements of Council Directive 2009/23/EC, EN 45501:1992,
and OIML R76:2006.
* For balances verified for use in legal metrology in accordance with
EU requirements, refer to the information on the balance.
** For balances verified for use in legal metrology in accordance with
EU requirements, the legal regulations apply.
Standard Equipment
APC Features– Monitoring of compliance with
the USP minimum sample weight
limits – SQmin
– Password protection of set-up
settings
– Fully automatic temperature-
and time-controlled internal
calibration and adjustment –
isoCAL
– Temporary blockage of data
transfer to a printer or a computer when uncertain weighing
results are detected, such as a
result is below the USP minimum
sample weight limit, the balance
is not level or isoCAL calibration |
adjustment needs to be performed
– Storage of all data of calibration
procedures – Cal Audit Trail
Safety LevelThree configurable levels of security
LevellingIntelligent, optoelectronic leveling
sensor with alarm function
and interactive user guidance for
reliable leveling
CalibrationInternal calibration isoCAL,
External calibration
1)
Selectable weight units
Gram, kilogram, carat, pound,
ounce, troy ounce, Hong Kong tael,
Singapore tael, Taiwan tael, grain,
pennyweights, milligram, parts
per pound, China tael, mommes,
Austrian carat, tola, baht, mesghal
and Newton
Interfacemini USB
– Automatic recognition of
Sartorius printer models YDP30
or YDP40
– Direct data transfer to
Microsoft
®
Windows programs
– Programmable interval for
data output
– Data transfer protocols SBI, xBPI,
table format, text format
DisplayTouch screen with Sartorius
(standard deviation), typical
Linearity deviationmg0.010.1 | 0.1 | 0.20.1 | 0.10.3
Typical starting point of the
operating range
Optimal starting point of the
operating range
2)
2)
Sensitivity drift between
mg425**25**160
mg1.64*8.2**8.2**82
± ppm/K1111
+10 °C and +30 °C
Typical stabilization times86 | 6 | 26 | 62
isoCAL:
– Temperature change
– Time interval
Display result
K
h
1.5
4
1.5
4
1.5
4
1.5
4
s0.2 | 0.40.2 | 0.40.2 | 0.40.2 | 0.2
(depending on the set filter level)
Weighing pan size mm
d 50d 80
(optional d 90)
d 80
(optional d 90)
d 90
Weighing chamber height*** mm218218218218
Net weight, approx. kg8.07.87.87.9
IP protection classIP43IP43IP43IP43
1)
Design 3Design 1Design 2Design 4Design 5
* In combination with glass draft shield YHK01SQP
** In combination with weighing pan, 80 mm, slotted YSP01SQP
*** Upper edge of the weighing pan to the lower edge of the upper draft shield panel
1)
Possible terms for country-specific models:
x = S: Standard balances without country-specific additions
x = SAR: Standard balances with country-specific additions for Argentina
x = SJP: Standard balances with country-specific additions for Japan
x = SKR: Standard balances with country-specific additions for South Korea
2)
According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined from 820d to maximum weighing capacity.
Depending on the installation location and environmental conditions, the value could be higher.
d 180d 180d 180d 180d 180d 180d 180
Net weight, approx.kg5.25.25.25.25.25.25.2
1)
Laboratory Balances5
Verified Models with Country-specific Type Approval Certificate
Model26-1x
2)
225D-1x
2)
125-1x
2)
324-1x
Design1222
Accuracy class
3)
Type
kkkk
SQP-HSQP-FSQP-FSQP-G
Maxg21120 | 220120320
Scale interval dg0.0000020.00001 | 0.00010.000010.0001
Verification scale interval eg0.0010.0010.0010.001
Ming0.0010.0010.0010.01
Min (only for Models ...-1OIN)g0.10.10.10.1
Tare equalization range
<100 % of the max. weighing capacity
(subtractive)
Typical starting point of
the operating range
Optimal starting point of
the operating range
4)
4)
g0.0040.025**0.025**0.160
g0.00164*0.0082**0.0082**0.082
Typical stabilization times86 | 262
isoCAL:
– Temperature change
– Time interval
Display result
K
h
1.5
4
1.5
4
1.5
4
1.5
4
s0.2 | 0.40.2 | 0.40.2 | 0.40.2 | 0.2
(depending on the set filter level)
Weighing pan sizemm
d 50d 80
(optional d 90)
d 80
(optional d 90)
d 90
Weighing chamber height***mm218218218218
Net weight, approx.kg8.07.87.87.9
IP protection classIP43IP43IP43IP43
2)
* In combination with glass draft shield YHK01SQP
** In combination with weighing pan, 80 mm, slotted YSP01SQP
*** Upper edge of the weighing pan to the lower edge of the upper draft shield panel
2)
Possible terms for country-specific models:
x = CEU: Verified balances with EC Type Approval Certificate D12-09-014 (for EU except France, Italy, and Switzerland)
x = CFR: Verified balances with EC Type Approval Certificate D12-09-014 for France only
x = CIT: Verified balances with EC Type Approval Certificate D12-09-014 for Italy only
x = CCH: Verified balances with EC Type Approval Certificate D12-09-014 for Switzerland only
x = CN: CMC Type Approval Certificate for China
x = OJP: Balance with Type Approval Certificate for Japan
x = OBR: Balance with Type Approval Certificate for Brazil
x = ORU: Balance with Type Approval Certificate for Russia
x = OIN: Balance with Type Approval Certificate for India
x = OAU: Balance with Type Approval Certificate for Australia
3)
All models with “...CN”: type “SQP”
4)
According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined from 820d to maximum weighing capacity.
Depending on the installation location and environmental conditions, the value could be higher.
d 180d 180d180d 180d 180d 180d 180d 180
Net weight, approx.kg5.25.25.25.25.25.25.25.2
2)
Laboratory Balances7
Optional Accessories
Printers and Communications
Premium GLP Laboratory Printer
– Printer paper for GLP laboratory printer
– Endless labels for GLP laboratory printer
Standard Laboratory Printer
– Printer paper for standard laboratory printer
Data communication cable, USB | USB AYCC04-D09
Data communication cable, mini USB | RS232, 9-pinYCC03-D09
Data communication cable, mini USB | RS232, 25-pinYCC03-D25
General
Battery Pack for Standard Lab BalancesYRB11Z
Draft shield for balances with a readability of 10 mgYDS01SQP
Round glass draft shield for balances with a readability of 1 mgYDS02SQP
Glass draft shield for balances with a readability of 0.002 mg,
for increasing the weighing performance
In-use cover for balances with a readability of 0.01 mg | 0.002 mg6960SE05
In-use cover for balances with a readability of 0.1 mg | 1 mg6960SE01
In-use cover for balances with a readability of 10 mg6960SE02
Dust cover for balances with a readability of 0.1 mg | 1 mg6960SE03
Dust cover for balances with a readability of 0.01 mg | 0.002 mg6960SE04
Certificate of USP minimum weight84CGNA
YDP30
69Y03285
69Y03286
YDP40
69Y03287
YHK01SQP
Weighing Pans (for balances design 1)
Weighing pan, diameter 80 mm, slotted, for increasing the weighing performanceYSP01SQP
Weighing pan, diameter 90 mm; includes conversion kitYWP01SQP
Filter weighing pan, diameter 130 mm YFW01SQP
Stainless steel weighing pan set, diameter 50 mm, for balances with a readability of 0.002 mgVF4589
Density Determination
Density kit for balances with a readability of 0.01 mgVF4601
Density kit for balances with a readability of 0.1 mg | 1 mgYDK03
Density kit for balances with a readability of 10 mgYDK04
Calibration Weights
Calibration weight for lab balance model 26
– Proof Line knob weight 20 g, OIML class E2, with DAkkS certificate
Calibration weight for lab balance model 324; 224; 313; 213
– Proof Line knob weight 200 g, OIML class E2, with DAkkS certificate
Calibration weight for lab balance model 225D; 125; 124
– Proof Line knob weight 100 g, OIML class E2, with DAkkS certificate
Calibration weight for lab balance model 613; 513; 612
– Proof Line knob weight 500 g, OIML class E2, with DAkkS certificate
Calibration weight for lab balance model 6102; 5102
– Proof Line knob weight 5 kg, OIML class E2, with DAkkS certificate
Calibration weight for lab balance model 3102; 2102
– Proof Line knob weight 2 kg, OIML class E2, with DAkkS certificate
Calibration weight for lab balance model 1103; 1102
– Proof Line knob weight 1 kg, OIML class E2, with DAkkS certificate
Calibration weight for lab balance model 6101
– Proof Line knob weight 5 kg, OIML class F1, with DAkkS certificate
Calibration weight for lab balance model 3101
– Proof Line knob weight 2 kg, OIML class F2, with DAkkS certificate
YCW422-AC-02
YCW522-AC-02
YCW512-AC-02
YCW552-AC-02
YCW652-AC-02
YCW622-AC-02
YCW612-AC-02
YCW653-AC-02
YCW624-AC-02
Technical Drawings
Models with a readability of 0.002 mg, in mm
Laboratory Balances9
Models with a readability of 0.01 mg and 324-1x, in mm
Models with a readability of 0.1 mg (except 324-1x), in mm
Sartorius de México, S.A. de C.V.
Libramiento Norte de Tepotzotlan s/n,
Colonia Barrio Tlacateco,
Municipio de Tepotzotlan,
Estado de México,
C.P. 54605
Phone +52.55.5562.1102
Fax +52.55.5562.2942
leadsmex@sartorius.com
Peru
Sartorius Peru S.A.C.
Av. Emilio Cavenecia 264 San Isidro
15073 Lima, Perú
Phone +51.1.441 0158
Fax +51.1.422 6100
Asia|Pacific
Australia
Sartorius Australia Pty. Ltd.
Unit 5, 7-11 Rodeo Drive
Dandenong South Vic 3175
Phone +61.3.8762.1800
Fax +61.3.8762.1828
Hong Kong
Sartorius Hong Kong Ltd.
Unit 1012, Lu Plaza
2 Wing Yip Street
Kwun Tong
Kowloon, Hong Kong
Phone +852.2774.2678
Fax +852.2766.3526
India
Sartorius Weighing India Pvt. Ltd.
#69/2-69/3, NH 48, Jakkasandra,
Nelamangala Tq
562 123 Bangalore, India
Phone +91.80.4350.5250
Fax +91.80.4350.5253
Japan
Sartorius Japan K.K.
4th Fl., Daiwa Shinagawa North Bldg.
8-11, Kita-Shinagawa 1-chome
Shinagawa-ku, Tokyo, 140-0001 Japan
Phone +81.3.3740.5408
Fax +81.3.3740.5406
Malaysia
Sartorius Malaysia Sdn. Bhd
Lot L3-E-3B, Enterprise 4
Technology Park Malaysia
Bukit Jalil
57000 Kuala Lumpur, Malaysia
Phone +60.3.8996.0622
Fax +60.3.8996.0755
Singapore
Sartorius Singapore Pte. Ltd
1 Science Park Road,
The Capricorn, #05-08A,
Singapore Science Park II
Singapore 117528
Phone +65.6872.3966
Fax +65.6778.2494
South Korea
Sartorius Korea Ltd.
8th Floor, Solid Space B/D,
PanGyoYeok-Ro 220, BunDang-Gu
SeongNam-Si, GyeongGi-Do, 463-400
Sartorius (Shanghai) Trading Co., Ltd.
3rd Floor, North Wing, Tower 1
No. 4560 Jinke
Zhangjiang Hi-Tech Park
Pudong District
Shanghai 201210, P.R. China
Phone +86.21.6878.2300
Fax +86.21.6878.2882
Road
Specifications subject to change without notice. Copyright Sartorius Lab Instruments GmbH & Co. KG. Printed in the EU on paper bleached without chlorine.