Sartorius PRACTUM2102-1S, Practum2101-1S, PRACTUM213-1S, PRACTUM1102-1S, Practum6100-1S Data Sheet

...
Practum
®
– Unmatched reliability with the world-class weighing
instrument – Overload protection for years of reliability – Supervisor Lock – Fast and easy data transfer

Product Information

Get best value for your money, without compromises in precision and reliability. Rely on consistent readings and excellent repeatability ensured by Sartorius quality and technology developed and designed in Germany.

Technical Specifications

AC Adapter Sartorius AC adaptor
module Primary 100 – 240 V~, –10% | +10%, 50 – 60 Hz, 0.2 A Secondary 15 V DC, ± 5%, 530 mA (max.) |
Other data protection class II, in accordance with
6971790 with interchangeable country­specific plug-in AC adaptors
8 Watt (max.): 0 to +40 °C and 15 V DC, ± 5%, 330 mA (max.) | 5 Watt (max.): 0 to +50 °C
EN | IEC 60950-1 up to 3000 level; IP40 as per EN | IEC 60529
m above sea
Balance Power supply only via Sartorius AC adaptor module
6971790 Input voltage 12.0 ... 18.0 V DC Power consumption 2 W (typically)
Laboratory Balances
Ambient Conditions The specifications apply when the following ambient conditions
are in place: Environment for indoor use only Ambient
+10 °C to +30 °C
temperature* Operational capacity guaranteed between +5 °C and +45 °C Storage and shipping –10 °C to +60 °C Elevation up to 3,000 m above sea level Relative humidity** 15% to 80% for temperatures up to 31 °C;
non-condensing, decreasing linearly to 50% relative humidity at 40 °C and 20% at 50 °C
Safety of electrical equipment
in accordance with EN 61010-1 | IEC 61010-1. Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General requirements
Electromagnetic compatibility
in accordance with EN 61326-1 | IEC 61326-1. Electrical equipment for measurement, control, and laboratory use – EMC requirements – Part 1: General requirements
Defined immunity
Suitable for use in industrial areas
to interference Interference emission Class B (suitable for use in residential
areas and areas that are connected to a low voltage network that also supplies residential buildings). The device can therefore be used in both areas.
Verified balances in accordance with EU requirements comply with the requirements of Council Directive 2009/23/EC with EN 45501:1992 and OIML R76:2006.
* For verified balances in accordance with EU requirements,
refer to the information on the balance.
** For verified balances in accordance with EU requirements,
the legal regulations apply.
Standard Equipment Levelling Glass level indicator with air bubble for
centering Calibration External calibration Selectable
weight units
Gram, kilogram, carat, pound, ounce,
troy ounce, Hong Kong tael, Singapore tael,
Taiwan tael, grain, pennyweights, milligram,
parts per pound, China tael, mommes, Aus-
trian carat, tola, baht, mesghal and Newton Interface mini USB
– Automatic recognition of Sartorius
printer YDP40
– Direct data transfer to Microsoft
®
Windows programs – Programmable interval for data output – Data transfer protocols SBI, table format,
text format
Display Touch screen with Sartorius graphical
user interface
Standard built-in applications
Weighing, Density, Percentage, Checkweighing, Peak Hold, Counting, Unstable Conditions (Animal Weighing)
Languages English, French, German, Hungarian,
Italian, Polish, Portuguese, Russian, Spanish, Turkish, Chinese, Japanese, Korean
Protection – Rugged, easy-to-clean housing
– In-use cover – Dust cover for analytical balances
Password protection Supervisor lock for protection against
unintentional changes
Anti-theft lock Kensington lock and lockdown capability
for cable or chain
Underfloor
Integrated
weighing
Design 1 Design 2 Design 3

Standard Models

Model 224-1x
1)
124-1x
1)
64-1x
1)
513-1x
1)
313-1x
1)
213-1x
1)
Design 1 1 1 2 2 2
Weighing capacity g Readability mg Repeatability
mg
220 120 60 510 310 210
0.1 0.1 0.1 1 1 1
0.1 0.1 0.1 1 1 1
(standard deviation) Linearity deviation mg
Sensitivity drift between
± ppm/K
0.2 0.2 0.2 2 2 2 2 2 2 3 3 3
+10 °C and +30 °C Typical stabilization time s 2 2 2 1 1 1 Weighing pan size mm
d 90 d 90 d 90 d 120 d 120 d 120 Weighing chamber height* mm 209 209 209 209 209 209 Net weight, approx. kg 4.5 4.5 4.5 4.9 4.9 4.9 Dimensions, D × W × H mm
Inch
Model 3102-
360 × 216 × 320
14.1 × 8.5 × 12.6
2102-
1x
1)
1x
1)
1102-
1)
1x
612-
1)
1x
412-
1)
1x
6101-
1)
1x
5101-
1)
1x
2101-
1)
1x
6100-
1)
1x
5100-
1)
1x
Design 3 3 3 3 3 3 3 3 3 3 Weighing capacity g 3,100 2,100 1,100 610 410 6,100 5,100 2,100 6,100 5,100 Readability mg 10 10 10 10 10 100 100 100 1,000 1,000 Repeatability
mg 10 10 10 10 10 100 100 100 500 500
(standard deviation) Linearity deviation mg 30 30 30 30 30 300 300 300 1,000 1,000 Sensitivity drift between
± ppm/K 4 4 4 4 4 8 8 8 8 8
+10 °C and +30 °C Typical stabilization time s 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1 1 Weighing pan size mm
d 180 d 180 d 180 d 180 d 180 d 180 d 180 d 180 d 180 d 180 Net weight, approx. kg 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 Dimensions, D × W × H mm
Inch
360 × 216 × 95
14.1 × 8.5 × 3.75
* Upper edge of the weighing pan to the lower edge of the upper draft shield panel
1)
Possible terms for country-specific models: x = S: Standard balances without country-specific additions x = SAR: Standard balances with country-specific additions for Argentina x = SJP: Standard balances with country-specific additions for Japan x = SKR: Standard balances with country-specific additions for South Korea
Laboratory Balances 3

Verified Models with Country-specific Type Approval Certificate

Model
224-1x
2)
124-1x
2)
64-1x
2)
513-1x
2)
313-1x
2)
213-1x
2)
Design 1 1 1 2 2 2 Accuracy class
3)
Type
SQP-A SQP-A SQP-A SQP-B SQP-B SQP-B Max g 220 120 60 510 310 210 Scale interval d mg 0.1 0.1 0.1 1 1 1 Verification scale interval e mg 1 1 1 10 10 10 Min mg 10 10 10 20 20 20 Min
mg 100 100 100 200 200 200
(only for Models ...-1OIN) Tare equalization range
< 100% from max. weighing capacity (subtractive)
Typical stabilization time s 2 2 2 1 1 1 Weighing pan size mm
d 90 d 90 d 90 d 120 d 120 d 120 Weighing chamber height* mm 209 209 209 209 209 209 Net weight, approx. kg 4.5 4.5 4.5 4.9 4.9 4.9 Dimensions, D × W × H mm
Inch
360 × 216 × 320
14.1 × 8.5 × 12.6
Model 3102-1x2)2102-1x2)1102-1x2)612-1x2)6101-1x2)5101-1x2)6100-1x2)5100-1x
Design 3 3 3 3 3 3 3 3 Accuracy class
3)
Type
SQP-C SQP-C SQP-C SQP-C SQP-E SQP-E SQP-E SQP-E Max g 3,100 2,100 1,100 610 6,100 5,100 6,100 5,100 Scale interval d mg 10 10 10 10 100 100 1,000 1,000 Verification scale interval e mg 100 100 100 100 1,000 1,000 1,000 1,000 Min g 0.5 0.5 0.5 0.5 5 5 50 50 Min
g 5 5 5 5 50 50 50 50
(only for Models ...-1OIN) Tare equalization range
< 100% from max. weighing capacity (subtractive)
Typical stabilization time s 1.5 1.5 1.5 1.5 1.5 1.5 1 1 Weighing pan size mm
d 180 d 180 d 180 d 180 d 180 d 180 d 180 d 180 Net weight, approx. kg 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 Dimensions, D × W × H mm
Inch
360 × 216 × 95
14.1 × 8.5 × 3.75
2)
* Upper edge of the weighing pan to the lower edge of the upper draft shield panel
2)
Possible terms for country-specific models: x = CN: CMC Type Approval Certificate for China x = OJP: Balance with Type Approval Certificate for Japan x = OBR: Balance with Type Approval Certificate for Brazil x = ORU: Balance with Type Approval Certificate for Russia x = OIN: Balance with Type Approval Certificate for India x = OAU: Balance with Type Approval Certificate for Australia
3)
All models with “...CN”: type “SQP”

Optional Accessories

Printers and Communications Standard Laboratory Printer
– Printer paper for standard laboratory printer Data Cable Mini USB | USB A YCC04-D09 Date Cable Mini USB | RS232 9-pin YCC03-D09 Date Cable Mini USB | RS232 25-pin YCC03-D25
General Battery Pack for Standard Lab Balances YRB11Z Draft shield for balances with a readability of 0.01 g | 0.1 g | 1 g YDS01SQP Draft shield for balances with a readability of 1 mg YDS02SQP In-use cover for balances with a readability of 0.1 mg and 1 mg 6960SE01 In-use cover for balances with a readability of 0.01 g | 0.1 g | 1g 6960SE02 Dust cover for balances with a readability of 0.1 mg | 1 mg 6960SE03
Density Determination Density kit for balances with a readability of 0.1 mg | 1 mg YDK03 Density kit for balances with a readability of 0.01 g | 0.1 g | 1g YDK04
YDP40 69Y03287
Calibration Weights Calibration Weight for lab balance model 224; 313; 213
– Proof Line knob weight 200 g, OIML class E2, with DAkkS certificate Calibration Weight for lab balance model 124
– Proof Line knob weight 100 g, OIML class E2, with DAkkS certificate Calibration Weight for lab balance model 64
– Proof Line knob weight 50 g, OIML class E2, with DAkkS certificate Calibration Weight for lab balance model 513
– Proof Line knob weight 500 g, OIML class E2, with DAkkS certificate Calibration Weight for lab balance model 3102; 2102
– Proof Line knob weight 2 kg, OIML class F1, with DAkkS certificate Calibration Weight for lab balance model 1102
– Proof Line knob weight 1 kg, OIML class F1, with DAkkS certificate Calibration Weight for lab balance model 612
– Proof Line knob weight 500 g, OIML class F1, with DAkkS certificate Calibration Weight for lab balance model 412
– Proof Line knob weight 200 g, OIML class F1, with DAkkS certificate Calibration Weight for lab balance model 6101; 5101; 6100; 5100
– Proof Line knob weight 5 kg, OIML class F2, with DAkkS certificate Calibration Weight for lab balance model 2101
– Proof Line knob weight 2 kg, OIML class F2, with DAkkS certificate
YCW522-AC-02
YCW512-AC-02
YCW452-AC-02
YCW552-AC-02
YCW623-AC-02
YCW613-AC-02
YCW553-AC-02
YCW523-AC-02
YCW654-AC-02
YCW624-AC-02
Laboratory Balances 5

Technical Drawings

Models with a readability of 0.1 mg, in mm
Models with a readability of 1 mg, in mm
Models with a readability of > 10 mg (exclude 3102), in mm
180
88
73
119 205
359
85
Models with a readability of 10 mg and a capacity of > 3,100 g, in mm
188
214
218
214
Laboratory Balances 7

Sales and Service Contacts

For further contacts, visit www.sartorius.com
Europe
Germany
Sartorius Lab Instruments GmbH & Co. KG Weender Landstrasse 94–108 37075 Goettingen
Phone +49.551.308.0 Fax +49.551.308.3289
France & Suisse Romande
Sartorius France 2, rue Antoine Laurent de Lavoisier ZA de la Gaudrée 91410 Dourdan
Phone +33.1.70.62.50.00 Fax +33.1.64.59.76.39
Austria
Sartorius Austria GmbH Modecenterstrasse 22 1030 Vienna
Phone +43.1.7965760.0 Fax +43.1.7965760.24
Belgium
Sartorius Belgium N.V. Rue Colonel Bourg 105 1030 Bruxelles
Phone +32.2.756.06.90 Fax +32.2.481.84.11
Finland & Baltics
Sartorius Biohit Liquid Handling Oy Laippatie 1 00880 Helsinki
Phone +358.9.755.951 Fax +358.9.755.95.200
Hungary
Sartorius Hungária Kft. Kagyló u. 5. 2092 Budakeszi
Phone +3623.457.227 Fax +3623.457.147
Ireland
Sartorius Ireland Ltd. Unit 41, The Business Centre Stadium Business Park Ballycoolin Road Dublin 11
Phone +353.1.8089050 Fax +353.1.8089388
Italy
Sartorius Italy S.r.l. Viale A. Casati, 4 20835 Muggiò (MB)
Phone +39.039.4659.1 Fax +39.039.4659.88
Netherlands
Sartorius Netherlands B.V. Phone +31.30.60.53.001
Fax +31.30.60.52.917 info.netherlands@sartorius.com
Poland
Sartorius Poland sp.z o.o. ul. Wrzesinska 70 62-025 Kostrzyn
Phone +48.61.6473830 Fax +48.61.6473839
Russian Federation
LLC “Sartorius RUS” Uralskaya str. 4, Lit. B 199155 St. Petersburg
Phone +7.812.327.53.27 Fax +7.812.327.53.23
Spain & Portugal
Sartorius Spain, S.A. Avda. de la Industria, 32 Edificio PAYMA 28108 Alcobendas (Madrid)
Phone Spain +34.902.123.367 Phone Portugal +351.800.855.800 Fax Spain +34.91.358.96.23 Fax Portugal +351.800.855.799
Switzerland
Sartorius Mechatronics Switzerland AG Ringstrasse 24a 8317 Tagelswangen (ZH)
Phone +41.44.746.50.00 Fax +41.44.746.50.50
U.K.
Sartorius UK Ltd. Longmead Business Centre Blenheim Road, Epsom Surrey KT19 9QQ
Phone +44.1372.737159 Fax +44.1372.726171
Ukraine
LLC “Biohit” Post Box 440 “B” 01001 Kiev, Ukraine
Phone +380.44.411.4918 Fax +380.50.623.3162
Americas
USA
Sartorius Corporation 5 Orville Drive, Suite 200 Bohemia, NY 11716
Phone +1.631.254.4249 Toll-free +1.800.635.2906 Fax +1.631.254.4253
Argentina
Sartorius Argentina S.A. Int. A. Ávalos 4251 B1605ECS Munro Buenos Aires
Phone +54.11.4721.0505 Fax +54.11.4762.2333
Brazil
Sartorius do Brasil Ltda Avenida Senador Vergueiro 2962 São Bernardo do Campo CEP 09600-000 - SP- Brasil
Phone +55.11.4362.8900 Fax +55.11.4362.8901
Canada
Sartorius Canada Inc. 2179 Dunwin Drive #4 Mississauga, ON L5L 1X2
Phone +1.905.569.7977 Toll-Free +1.800.668.4234 Fax +1.905.569.7021
Mexico
Sartorius de México S.A. de C.V. Circuito Circunvalación Poniente No. 149 Ciudad Satélite 53100, Estado de México México
Phone +52.5555.62.1102 Fax +52.5555.62.2942
Asia|Pacific
Australia
Sartorius Australia Pty. Ltd. Unit 5, 7-11 Rodeo Drive Dandenong South Vic 3175
Phone +61.3.8762.1800 Fax +61.3.8762.1828
China
Sartorius (Shanghai) Trading Co., Ltd. 3rd Floor, North Wing, Tower 1 No. 4560 Jinke Road Zhangjiang Hi-Tech Park Pudong District Shanghai 201210, P.R. China
Phone +86.21.6878.2300 Fax +86.21.6878.2882
Hong Kong
Sartorius Hong Kong Ltd. Unit 1012, Lu Plaza 2 Wing Yip Street Kwun Tong Kowloon, Hong Kong
Phone +852.2774.2678 Fax +852.2766.3526
India
Sartorius Weighing India Pvt. Ltd. #69/2-69/3, NH 48, Jakkasandra, Nelamangala Tq 562 123 Bangalore, India
Phone +91.80.4350.5250 Fax +91.80.4350.5253
Japan
Sartorius Japan K.K. 4th Fl., Daiwa Shinagawa North Bldg. 8-11, Kita-Shinagawa 1-chome Shinagawa-ku, Tokyo, 140-0001 Japan
Phone +81.3.3740.5408 Fax +81.3.3740.5406
Malaysia
Sartorius Malaysia Sdn. Bhd Lot L3-E-3B, Enterprise 4 Technology Park Malaysia Bukit Jalil 57000 Kuala Lumpur, Malaysia
Phone +60.3.8996.0622 Fax +60.3.8996.0755
Singapore
Sartorius Singapore Pte. Ltd 1 Science Park Road, The Capricorn, #05-08A, Singapore Science Park II Singapore 117528
Phone +65.6872.3966 Fax +65.6778.2494
South Korea
Sartorius Korea Ltd. 8th Floor, Solid Space B/D, PanGyoYeok-Ro 220, BunDang-Gu SeongNam-Si, GyeongGi-Do, 463-400
Phone +82.31.622.5700 Fax +82.31.622.5799
Thailand
Sartorius (Thailand) Co. Ltd. 129 Rama 9 Road, Huaykwang Bangkok 10310
Phone +66.2643.8361-6 Fax +66.2643.8367
www.sartorius.com
Specifications subject to change without notice. Copyright Sartorius Lab Instruments GmbH & Co. KG. Printed in the EU on paper bleached without chlorine.
Publication No.: WL-2002-e151206 · Order No.: 98649-013-94 · Ver. 12 | 2015
Loading...