Sartorius MSE8201S-ED15, MSE8202S-000-D0, MSE623S-100-DE, MSA225S100DI, MSA225P100DI Data Sheet

...

Cubis®: The Lab Balance That Adapts to Your Process

2 Introduction

Cubis® Premium Laboratory Balances

Universal balances often only offer limited options to adapt them to special workflows in laboratories. Therefore, standard operating procedures (SOPs) must frequently be adapted to the existing functionalities of laboratory balances.

This does not apply to Sartorius

Cubis

: they are the first laboratory balances that you can integrate into your individual workflows, as well as adapt to your weighing containers and the conditions at your workplace by using accessories and mechanical extensions.

Modularity

Operating Design

Q-Apps

Applications

Leveling

Communication

Draft Shield

Micro Balances

High-capacity Models

Safe Weighing

Advanced Pharma Compliance

Technical Specifications

4 Modularity

Cubis®: Standard, Personalized or Fully Customized? Your Choice

MODULAR DESIGN

Since we launched the Cubis

range of premium laboratory balances in 2009, it has become the benchmark for use in regulated sectors that impose the highest requirements, such as in global pharmaceutical labs.

Modular Configuration

The first series of laboratory balances to feature a completely modular design, Cubis

enables you to combine your choice of display and control unit, weighing module, data interface module, and much more.

You can choose from thousands of options to configure your balance to suit your individual needs and obtain the optimal solution for integration into your process.

Cubis

individual Software

With the unique Cubis

individual software, you can create your own fully individual profile for your specific requirements without additionally needing to use a computer. Start off by integrating data into your software infrastructure and continue right on up to implementing complete control of your weighing process.

Your benefits: quick, clearlydefined processes and accuracy.

New Models

With the new high-capacity models, Cubis

now covers the entire range, from research and QC laboratories to testing laboratories.

Cubis

offers a comprehensive range of accessories to choose from so you will find individual solutions that are best for your applications (see p. 20).

NEW

6 Operating Design

Reliable and Easy to Use with Standard with Personalized

The Cubis® Operating Design

Beyond the Q-Guide standard user interface,

offers you personalized solutions

Cubis with Q-Apps. You can choose from a wide variety of downloadable Q-Apps for laboratory applications. The advantage is that you and your operators can adapt or fully personalize them according to your process workflows or even configure them to meet your special requirements right from the start.

Q-Apps

Q-Guide or

In addition to aspects strictly involving metrological specifications, preparing for and performing a weighing procedure, compliance with the relevant regulatory standards is gaining ever-increasing importance.

Cubis® Display and Control Units

MSA – The Ultimate Solution

– Top-of-the-line technology and

information design

– Touch screen featuring high-resolution

color TFT for brilliant reproduction of text and graphics

– Outstanding ease of use and display

quality, especially for complex applications

– Q-Apps can be customized to your

individual workflow

The Cubis

easy-to-operate Q-Guide concept speeds up lab workflows. Moreover, Q-Guide eliminates the need for you and other users to perform timeconsuming steps all on your own.

Q-Guide is designed so that you only see what is needed for carrying out the task at hand. Once you have configured a task, Q-Guide will lead you interactively through the settings and display only the relevant information.

MSU – Classic and Universal

– High-resolution, generously sized,

monochrome graphic display

– Keys that feature positive click action

and precise activation of functions

– Classic key-operated control with the

widest possible range of performance features

MSE – Weighing Pure and Simple

– Large, high-contrast liquid crystal display – Easy-to-understand menu guidance with

short text prompts

– Clearly structured keys for precise

activation of functions

– For users without complex operations who

primarily want to perform ultra-precise weighing

8 Q-Apps

A Multitude of Standardized Q-Apps Ready for You

If you have a weighing task not covered by one of the standardized Q-Apps downloadable from the App Center, contact your responsible Cubis

individual specialist. Just for you, our specialist will create an individual Q-App configured to meet your specific application requirements.

Application Example

Q-App: USP Chapter 41

Application Example

Q-App: Formulation

The Sartorius App Center: Download and Test Your Preferred Apps

You can readily download any standard Q-Apps from the Sartorius App Center and install these from an SD card in a Cubis

laboratory balance. Just test the Q-Apps of your choice for 30 days free of charge to discover all their winning capabilities for increasing efficiency in your daily lab work.

Easy Licensing for Permanent Use of Q-Apps

To permanently use your Q-App on your

balance, you must first activate the

Cubis Q-App. Just enter the serial number of your

balance as well as your personal data.

Cubis In just a few minutes, you will receive your individual Q-App activation code.

No Computers Needed!

In pharmaceutical labs, placing computers next to a balance is not necessarily desirable because this does not meet the strict cleanroom requirements that Sartorius lab balances comply with so effectively. You can use the new Q-Apps to completely transfer your operating procedure (SOP) to the balance and avoid using a computer.

Cubis®. App-Solutely Individual

Q-Apps: Uniqueness Wins

Turn your Cubis

a Cubis customer-specific applica tions, called Q-Apps. These are downloadable application programs that guide you step by step through a specific workflow sequence.

Q-Apps ensure that the procedures described in the corresponding SOPs are observed at all times. This makes Q-Apps an attractive alternative to implementing external middleware.

Q-Apps: Standard or Personalized

Besides individual Q-Apps that are performed according to your specific application, a variety of solutions for differential weighing, formulation and average weight control, or checking the net quantities filled are available as standard Q-Apps.

Standard Q-Apps additionally provide solutions for defining the starting point of your balance‘s operating range as well as for easy pipette calibration. With Q-Apps, you can carry out a specific workflow without needing to connect a computer.

lab balance into

individual by integrating

Application Example

Q-App: Differential Weighing (Backweigher Light V3)

www.sartorius.com/cubisindividual

Applications

Individual Integration into

Across the globe, pharmaceutical lab processes look similar at first glance. Yet their requirements are highly individual, especially for weighing processes. Everybody has their own approach for preparing samples, selecting vessels and placing samples in a weighing container.

Your Application

Therefore, a lab balance must simply adapt to your entire process – not the other way around.

With its practical array of optional accessories, Cubis potential for fully personalized application add-ons that enable faster and more efficient work and enhance your process reliability.

Touch-free Draft Shield Operation

The motorized draft shield can be opened and closed without being touched – just a simple movement of your hand over the infrared sensor YHS01MS is all it takes. This provides additional safety, especially for applications involving toxic substances. In addition, the IR sensor can also be used to trigger other functions, such as printing, isoCAL or ionizer, etc.

offers the

Q-Grid Pan

This gridded weighing pan, Q-Grid (accessory option YWP03MS), is available for all Cubis readability of 10 mg and 100 mg, except for model 5202S and high-capacity precision models. Q-Grid lets you easily operate a balance with a large pan under laminar flow in safety powder hoods, workbenches or even in fume hoods, without restricting its performance. This saves considerable effort in busy pharmaceutical laboratories.

models with a

Q-Grip Holder

Q-Grip is a flexible and adaptable “one-size-fits-all” holder for bottles, test tubes, reaction containers and filters of up to 120 mm or nearly 5“. Available as accessory option YFH01MS, it fits on all Cubis

semi-micro balances and analytical balances. Simply use it in place of the original weighing pan. Its individually adjustable angle ensures that you can maintain an ergonomic posture during filling and pipetting to transfer samples into various containers.

Q-Stat Ionizer

At the touch of a key, the Q-Stat ionizer integrated into the DI draft shield (see p. 16), eliminates electrostatic charges within seconds from sample containers and substances, preventing any interference with your weight measurements. The effec

tive principle of four ion jets ensures that no disruptive air currents are generated during charge neutralization. This ensures that you will obtain stable and correct weighing results – independently of the ambient conditions.

12 Leveling

Q-Level: Automatic, Motorized Leveling Now a Standard Feature*

Exact leveling of a lab balance is a key procedure in inspection equipment monitoring and is essential for reliable readings.

This is where the standardequipped Q-Level automatic motorized leveling provides valuable support. This feature enables you to define which tasks the balance will carry out for you and

which you prefer to perform on your own.

Cubis

is the first lab balance that automatically checks, performs and documents its exact leveling. Leveling is started at the touch of a key or performed fully automatic when the isoCAL function is activated.

Monitoring Leveling

If the Cubis function detects that the balance is no longer level, an alert message will appear, prompting you to start the leveling process. Once started, internal motors level the balance in just seconds. You can track the progress of motorized leveling on the display. Almost instantly, the balance is ready again to provide reliable results.

continuous self-monitoring

* Leveling is done manually with interactive operator

guidance on the display for balances that do not feature motorized leveling (models with a weighing capacity > 6,200 g

with a readability < 0.001 mg).

14 Communication

Q-Com is a comprehensive communication concept that supports the requirement for integrating laboratory balances directly into the processes and IT structures of laboratories.

The concept includes advanced data interfaces that enable communication with laboratory information management systems (LIMS) and other external software and communication protocols.

Q-Com for Unlimited

Communication

Web Communication

MSA features a Web Services commu nication

Cubis platform as an option. This standardized communication technology permits external software systems, such as LIMS, ELN, etc. to display and use information, input fields, menus or complex operations on the touch screen of the balance. Bidirectional data transfer is enabled without complicated driver software. This eliminates the need to install computers, laptops or terminals in the direct vicinity of your balance.

SD Card as a Storage Medium

You can use an SD card to download all data, such as user master data or tasks, easily and securely from one Cubis another (no SD card port on the MSE display and control unit). Moreover, you can use this SD card as a storage medium for your measurement data.

Communication Protocols

is standard-equipped to support ASCII and SICS

Cubis communication protocols. You can therefore have your balance communicate with other manufacturers’ software. Used with the MSA display and control unit, Cubis optionally communicate over XML.

Interfaces

All Cubis ports (USB, RS232C, Ethernet [not on MSE]) and three optional ports ( any type of bidirectional communication. Now that’s what we call maximum connectivity!

Configurable Printout

The scope and content of the information to be printed is freely selectable. Via the Sartorius YDP30 printer, it is even possible to print out barcodes and QR codes.

balances have three standard-equipped interface

Bluetooth

, PS/2, RS232C), enabling nearly

can

16 Draft Shield

The Right Draft Shield

All draft shield models for the

Cubis

offer clear, practical advantages over conventional lab balances.

Thanks to the clever use of new materials, Cubis feature high mechanical stability, yet their doors glide open effortlessly and silently. They provide outstanding visibility inside the entire weighing chamber and protect it against external influences that can interfere with weighing accuracy.

Unlike conventional lab balances on which an electrostatically charged draft shield can cause measurement errors, Cubis eliminates these potential sources for error by a conductive coating on the glass panels of the draft shield.

draft shields

for Any Task

No Compromises in Cleaning

is well-protected against spillage of liquids.

Cubis The weighing pan and the base plate of the draft shield are made of high-grade stainless steel and can be removed quickly and easily for thorough cleaning. In seconds, the balance will be ready again for your measurements.

Cleaning of the Draft Shield

For cleaning purposes, all doors of the draft shield can be disassembled in just a few steps without compromising the stability of the entire unit.

DF Draft Shield for Filter Weighing

Manual stainless steel draft shield specially designed for ultraaccurate weighing of filters; for balances with 0.001 mg or

0.0001 mg readability (weighing modules 6.6S or 2.7S; not for 3.6P).

DM Draft Shield

Automatic ultra-micro- and micro balance draft shield with learning capability; for models with 0.001 mg or 0.0001 mg readability (weighing modules 6.6S, 3.6P, 2.7S).

DI Draft Shield

Automatic analytical balance draft shield with an integrated ionizer for all models with

0.01 mg, 0.1 mg or 1 mg readability and for model 5202S.

DA Draft Shield

Automatic analytical balance draft shield for all models with

0.01 mg, 0.1 mg or 1 mg readability and for model 5202S.

DU Draft Shield

Manual analytical balance draft shield for all models with 0.01 mg, 0.1 mg or 1 mg readability and for model 5202S.

DE Draft Shield

Manual draft shield for all models with 1 mg readability and for model 5202S.

DR Draft Shield

Removable, flat draft shield made of stainless steel for all models with 1 mg readability and for model 5202S.

18 Micro Balances

The Utmost Precision

for the Smallest Sample Quantities

The high accuracy requirements in analytical testing and quantitative analyses in the pharmaceutical industry make the use of highresolution balances indispensable. FDA compliance is only possible with laboratory balances that meet the minimum accuracy requirements of the US Pharmacopeia. Therefore, micro balances or even ultra-micro balances are needed to weigh samples less than 10 mg.

In addition, the substances to be analyzed are often only available in very small quantities and can also be expensive. In other cases, they may be so potent that users can only work with minimum quantities for their own protection.

Our Cubis® ultra-micro- and micro balances offer you the highest levels of safety, reliability of weighing results and conformity with the required standards.

In particular, the motorized all-glass draft shield helps accelerate workflows for fatigue-free weighing of minimum sample quantities. Moreover, the intelligent learning capability allows adaptation of the balance to any workflow.

Efficient Cleaning

Easy and fast cleaning is especially important when working with minute sample sizes, as it helps prevent crosscontamination. All parts of the draft shield can be removed fast and easily. After cleaning, the balance is ready to be used again just as quickly.

Filter Weighing

The special DF stainless steel filter draft shield is optimally designed to minimize the interfering effects of static electricity. A choice of weighing pan diameters is available to accommodate different filter sizes (50 mm is standard | 75 mm and 90 mm are optional).

High-performance Weighing Made Easy

If you do not have any complex application requirements, but still require weighing results with uncompromising reliability, the MSE display unit in conjunction with the weighing modules of the micro balances and ultra-micro balances offers a perfect and cost-effective solution.

On extra-size Cubis® weighing pans of 400 + 300 mm (nearly 16” + 12”), even large vessels will have enough space for safe and secure positioning. The sleek high-quality pan surfaces and easily removable control units permit quick and thorough cleaning.

With a removable display for remote or raised use on a support arm (accessory option YDH02MS), you can set up your balance the way you need it to minimize stress and strain, even when working with heavy loads.

High-capacity Models

Speed and Reliable Results

for the Largest Sample Sizes –

with Cubis

High-capacity Balances

The requirements on your balance also change as your sample sizes increase. In the harsh environment of technical plants, large sample container dimensions call for significantly more rugged weighing instruments, apart from demands place on protection and cleaning of the balances.

Cubis® continuously monitors whether it is perfectly level. Quick manual leveling takes just a few steps with interactive operator guidance prompts shown on the display.

Featuring IP 54 protection and top-quality, smooth surfaces, the new Cubis balances are more than capable of withstanding these conditions. They consistently deliver reliable results, even under the most adverse conditions – with an unwavering readability of 0.1 g for loads of up to 70 kg.

Cubis feature the full spectrum of options for easy process integration. With the MSA display and Q-Apps, they offer you a wide range of options for unique, customized solutions.

high-capacity

high-capacity models also

22 Safe Weighing

Safety Powder Hoods

Two major requirements are paramount when toxic, powdery samples are weighed: Safety comes first, closely followed by the accuracy of initial weights as the second priority.

The Sartorius safety weighing station, consisting of a safety powder hood (SPH) and a Cubis lab balance, is the professional solution to both of these requirements.

The safety powder hood creates a contained area around the lab balance which prevents all air and

finely powdered particulates from entering into the user‘s respiratory system. At the same time, due to the constant rate of pure air drawn inside the hood and the low-turbulence flow within the hood, consistent and reproducible weighing results are guaranteed.

The balance and weighing hood are a perfectly matched system. They provide perfect operator protection, while delivering absolutely correct weighing results.

Systematic Safety

The Cubis

– The mechanical level indicator

of a balance is often difficult or even impossible to see inside a hood. This leads to parallax errors during leveling and ultimately to incorrect weight measurement results. With Q-Level, an optional feature on balances with a weighing capacity of < 6.2 kg and a readability of > 0.001 mg, motorized leveling can be performed automatically inside the hood.

– With the optional infrared

sensor YHS01MS, the draft shield can be opened hands-free and the balance can be tared. This reduces the risk of contamination.

Safety Concept - Application-oriented and Flexible

– The

Bluetooth

eliminates the need for cables that can become contaminated so that the YDP10BT-0CE printer can be operated wirelessly outside the hood.

– The Q-Stat ionizer integrated

into DI draft shield (see p. 11), not only reduces the interfering effects of static electricity. This highly effective device also prevents samples from adhering to a spatula, which can lead to frustration and contamination when a user tries to shake off a sample and ends up spilling it.

interface module

– With the sample holder

YFH01MS, the best ergonomics are ensured for weighing-in under the difficult conditions in the hood.

– With the grid weighing pan

YWP03MS, even lab balances without draft shields (readability of 10 mg or 100 mg) can be operated in the air flow of the hood without any problems.

The Safety Powder Hoods are Available in Four Different Sizes:

Width Depth Height

SPH32 30” (762 mm) + 32” (813 mm) + 32.5” (826 mm)

SPH32B 30” (762 mm) + 32” (813 mm) + 32.5” (826 mm)

SPH48 30” (762 mm) + 48” (1219 mm) + 32.5” (826 mm)

SPH48B 30” (762 mm) + 48” (1219 mm) + 32.5” (826 mm)

All models consist of:

Ductless safety powder hood with two HEPA filters and one prefilter

with continuous laminar flow protection from particulates at 0.3μm at

99.97% efficiency

disposal port comes standard on “B” models only.

and low airflow audible and visual alarms. A waste

Sartorius guarantees that balances used inside the SPH will fulfill their technical specifications, such as reproducibility and starting point of the operating range, according to USP.

24 Advanced Pharma Compliance

Advanced Pharma Compliance

for Use in Regulated Sectors

With its integrated Advanced Pharma Compliance (APC) package, Cubis support to guarantee qualified results. The APC package features

Cubis

offers the best

Tamper Protection | Compliance Support

Functions

Monitoring of Inspection and Testing Equipment

Data Pr ocessing | Data Int egration | Proces s Integration

Operational Support | Ease of Use | Ergonomics

a broad range of functions that ensure perfect balance and process monitoring and guarantee the compatibility and traceability of your results.

Hierarchical password protection Integrated alibi memory User management Calibration storage Audit trail Action hierarchies for warning and intervention functions

Self-test

Leveling control Automatic motorized leveling, Q-Level Automatic time- and temperature-dependent calibration, isoCAL Monitoring of the operating range starting point according to USP 41, SQmin Automatic repeatability test, reproTEST

Support | Guidance

Monitoring pre-selectable calibration routines in UserCal (with Q-App) Determination of measurement uncertainty in accordance with USP Ch. 41 (with Q-App) Displaying measurement uncertainty, SURE

Applications | Workflows

Downloadable applications (Q-Apps) Integration of individual SOPs (workflows) Direct LIMS integration Advanced communication via web services

Interfaces

Serial Network-compatible

Integrated electrostatic eliminator, Q-Stat (with DI draft shield) Adjustable vessel holder, Q-Grip Weighing pan for laboratory fume hood or laminar flow bench, Q-Grid Infrared sensor, foot switch, barcode scanner (optional accessories) Programmable automatic draft shield doors

Cubis® MSA Cubis® MSU Cubis® MSE

•

26 Advanced Pharma Compliance

Advanced Pharma Compliance

for Use in Regulated Sectors

Balance Monitoring

The first balance with automatic motorized leveling: Q-Level

Process Monitoring

User Management

Q-Level enables you to have your balance automatically leveled by motors at the touch of a key. In the process, the

balance checks whether

Cubis it is perfectly level and will immediately alert you whenever it has to be re-leveled (automatic messaging only on models with a capacity of < 6.2 kg and a readability of > 0.001 mg).

Q-Level combines novel sensors and the most advanced display

User Profile Name | Password management for tamperproof security.

technology, making it easier and faster for you to level the balance accurately. Cubis along with MSA or MSU display and control units, offers interactive prompting to guide you during manual leveling. While Q-Level is active, the display will show you all the information you need: the position of the air bubble as well as text prompts, or icons on MSE, so you know which leveling foot to turn in which direction.

Action Hierarchy

has warning and

Cubis reminder functions in combination with a configurable action hierarchy for leveling, determining the USP Chapter 41 starting point of the operating range, and for calibration | adjustment.

Compatibility and Traceability

Cleaning Validation

Due to the highquality materials and smooth untextured surfaces, Cubis cleaned fast, easily and thoroughly.

can be

Audit Trail

Logs important changes to the balance, so any errors or other non-conforming items can be quickly traced to the source.

Fully Automatic Calibration | Adjustment with isoCAL

You can choose to have the

iso

CAL

iso

isoCAL function perform fully automatic calibration and adjustment after a factory

Target

Drift in the readout caused by fluctuations in the ambient conditions, such as temperature

preset or user-definable interval has elapsed. In addition, when a factory preset or user-definable temperature difference is exceeded, isoCAL will automatically trigger calibration and adjustment again.

SQmin Function

During a weighing process,

monitors compliance

Cubis of the starting point of its operating range with USP requirements. Once Cubis

determined the starting point of an operating range, it will alert you whenever a value goes below this lowest point and will identify any unacceptable weights recorded or transferred.

DAkkS Measurement Uncertainty

Following internationally recognized DakkS calibration by the Sartorius Services unit,

has

the characteristic curve of the measurement uncertainty can be read into the software of your Cubis

can choose between having the absolute or relative measurement uncertainty as well as the process accuracy

. As a result, you

displayed for every weight measured.

Linearization

So-called linearity errors occur when there are any deviations from the theoretical linear slope of a balance’s characteristic curve. Optimal linearization is required in order for your balance to meet its high accuracy criteria. That’s why

eliminates these errors

Cubis by automatically performing linearization.

Task Management

The task management function enables you to define application workflows in your

. After you have

Cubis configured a task workflow, you and your other operators will be guided interactively through your weighing process. Information not relevant to this process will be hidden to ensure error-free operation and to let you concentrate fully on the essentials of the task at hand.

Repeatability: ReproTEST

lets you determine

Cubis the standard deviation right where your balance is installed so you can check the repeatability of your weighing results: just one touch of a key is all it takes. This convenient reproTEST feature enables you to quickly determine whether the balance’s environment is suitable so your balance will consistently deliver optimal and reliable weight measurements.

Alibi Memory

A built-in alibi memory ensures traceable transfer of legal-for-trade weighing data to your computer.

GLP Certificate

We asked an independent institute known for its strict vigilance to test and evaluate the suitability of a representative sample of many Cubis

series balances for use in GLP environments. These balances were equipped with an MSA display and control unit for testing. The outcome: the suitability of

for use in these

Cubis environments was unconditionally certified.

Risk Analysis

A representative sample of many Cubis

series balances with an MSA display and control unit had to pass risk analysis testing according to the proactive method of FMEA (Failure Modes and Effects Analysis) as the basis for a GLP suitability review and cleaning validation. The results of this analysis are available on request.

28 Technical Specifications

Technical Specifications

Order Code

- -

Example

M S A 524P Ø T R D I I P

Cubis® Display and Control Units

Select the display and control unit and enter it in the field identified by the icon in the order code.

Types MSA MSU MSE

Operation Touch screen, keys for important

basic functions

Display High-resolution color TFT,

5.7” graphical display

Adaptation of the display and control unit

Standard data interfaces

SD card reader Integrated as standard into

Operation of motorized draft shield (only for DA, DI or DM draft shields)

Applications

Personalizable with Q-Apps

Tiltable display, removable display and control unit

– USB port (integrated into weighing module) – RS-232C accessory interface, 25-pin (integrated into weighing

module) – Ethernet (integrated into display and control unit) – Choice of data protocols available (also enables connection to

software designed for external manufacturers)

Bluetooth

–

display and control unit

Activated by side keys or touchfree using IR sensor (optional); learning capability

Mass unit conversion, SQmin function for operating range starting point according to USP, isoCAL automatic calibration | adjustment function, individual identifiers, density determina statistics, calculation, averaging, formulation, weighing in percent, time-controlled functions, totalizing, DAkkS measurement uncertainty, second tare memory, counting, checkweighing, alibi

– Downloadable Q-Apps – Customer-specific modifica-

tions on request

- -

(optional accessory)

memory, audit trail

Keys Keys

High-resolution black | white,

5.7” graphical display

Tiltable display, removable display and control unit

Integrated as standard into display and control unit

Activated by side keys or touchfree using IR sensor (optional); learning capability

Mass unit conversion, SQmin function for operating range starting point according to USP, isoCAL automatic calibration | adjustment function, individual

tion,

identifiers, density determination,

tatistics, calculation, averaging,

s formulation, weighing in percent, time-controlled functions, totalizing, DAkkS measurement uncertainty, second tare memory, counting, checkweighing, alibi

– –

memory, audit trail

Note: Please use the adjacent fields to enter the selection made for each icon.

Liquid crystal display, black | white

Removable display and control unit

– USB port (integrated into

weighing module)

– RS-232C accessory interface,

25-pin (integrated into weighing module)

Bluetooth

–

accessory)

–

Activated by key or touch-free using IR sensor (optional); learning capability

Mass unit conversion, isoCAL automatic calibration | adjustment function, density determination (buoyancy method only), calculation, averaging, net | total formulation, weighing in percent, counting, totalizing

(optional

Cubis® Weighing Modules

Please enter the model name, starting from the left, in the field identified by the icon in the order code.

Readability [mg]

Weighing capacity [g]

Ultra-Micro Balances

0.0001 mg

2.7S 0.0001 2.1

Micro Balances

0.001 mg

6.6S 0.001 6.1

3.6P 0.001 | 0.002 |

1.1 | 2.1 | 3.1

0.005

Semi-Micro Balances

0.01 mg

225S 0.01 220

225P

0.01 | 0.02 |

60 | 120 | 220

0.05

125P 0.01 | 0.1 60 | 120

Analytical Balances

0.1 mg

524S 0.1 520 524P 0.1 | 0.2 | 0.5 120 | 240 | 520 324S 0.1 320 324P 0.1 | 0.2 | 0.5 80 | 160 | 320 224S 0.1 220 124S 0 .1 120

Weighing pan (W + D) [mm]

d 20

d 30

85 + 85

85 + 85 85 + 85 85 + 85 85 + 85 85 + 85 85 + 85

Typical stabilization time [<s]

Typical response time [<s]

Repeatability [<±mg]

Linearity [<±mg]

Eccentric load [mg]* (Test load [g])

Optimum starting point of the operating range [mg]**

7 10 0.00025 0.0009 0.0025 (1) 0.082***

5 8 0.001 0.004 0.004 (2) 0.82***

5 8 0.003 | 0.004 |

0.004 0.005 (1) 0.82***

0.005

2 6 0…60 g: 0.015

0.1 0.15 (100) 8.2

60…220 g: 0.025

2 6 0…60 g: 0.015

0.15 0.2 (100) 8.2

60…220 g: 0.04

2 6 0…60 g: 0.015

0.15 0.15 (50) 8.2

60…120 g: 0.06

1 3 0.1 0.4 0.3 (200) 82 1 3 0.15 | 0. 2 | 0 .4 0.5 0.4 (200) 82 1 3 0.1 0.3 0.3 (200) 82 1 3 0.1 | 0.2 | 0.4 0.5 0.4 (200) 82 1 3 0.07 0.2 0.2 (100) 82 1 3 0.1 0.2 0.2 (50) 82

* Position according to OIML R76 **

According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined as the range from 820 d to the maximum weighing capacity. Depending on the installation location and environmental conditions, the value may be higher.

*** With DM draft shield

30 Technical Specifications

Cubis® Weighing Modules

Please enter the model name, starting from the left, in the field identified by the icon in the order code.

Readability [mg]

Weighing capacity [g]

Precision Balances 5203S 1 5,200

5203P 1 | 2 | 5

1,200 | 2,40 0 | 5,200

3203S 1 3,200 2203S 1 2,200 2203P 1 | 10 1,010 | 2,200 1203S 1 1,200 623S 1 620 623P 1 | 2 | 5 150 | 30 0 | 620 323S 1 320 14202S 10 14,20 0

14202P 10 | 20 | 50

3,50 0 | 7,000 | 14,200

10202S 10 10,200 8202S 10 8,200 6202S 10 6,200

6202P 10 | 20 | 50

1,500 | 3,0 0 0 | 6,200

5202S 10 5,200 4202S 10 4,200 2202S 10 2,200 1202S 10 1,200 12201S 100 12,20 0 8201S 100 8,200 5201S 100 5,200

Weighing pan (W + D) [mm]

140 + 140

140 + 140 140 + 140 140 + 140 140 + 140 140 + 140 140 + 140 140 + 140 206 + 206

206 + 206

206 + 206 206 + 206 206 + 206

206 + 206

140 + 140 206 + 206 206 + 206 206 + 206 206 + 206 206 + 206 206 + 206

Typical stabilization time [<s]

Typical response time [<s]

Repeatability [<±mg]

Linearity [<±mg]

Eccentric (offcenter) [mg]* (Test load [g])

Optimum starting point of the operating range [g]**

1 2 1 5 2 (2,000) 0.82

1 2 1 5 2 (1,000) 0.82 1 1.5 1 3 2 (1,000) 0.82 1 1.5 1 | 6 5 3 (1,000) 0.82 1 1.5 0.7 2 2 (500) 0.82

0.8 1 0.7 2 2 (200) 0.82

0.8 1 1 | 2 | 4 5 4 (200) 0.82

0.8 1 0.7 2 2 (200) 0.82 1 1.5 10 30 20 (5,000) 8.2

1 1.5 10 | 20 | 40 50 40 (5,000) 8.2

1 1.5 7 20 20 (5,000) 8.2 1 1.5 7 20 20 (5,000) 8.2 1 1.5 7 20 20 (2,000) 8.2

1 1.5 7 | 20 | 40 50 50 (2,000) 8.2

0.8 1 6 10 10 (2,000) 8.2

0.8 1 7 20 30 (2,000) 8.2

0.8 1 7 20 20 (1,000) 8.2

0.8 1 7 20 20 (500) 8.2

0.8 1 50 100 200 (5,000) 82

0.8 1 50 100 200 (2,000) 82

High-capacity Balances 70201S 100 70,200 36201S 100 36,200

36201P 100 | 1,000

10,200 | 36,200

20201S 100 20,200 70200S 1,000 70,200 36200S 1,000 36,200

* Position according to OIML R76 **

400 + 300 400 + 300

400 + 300

400 + 300 400 + 300 400 + 300

1.5 100 500 500 (20,000) 82

1.5 100 200 300 (10,000) 82

1.5 100 | 500 200 300 (10,000) 82

1.5 100 200 300 (5,000) 82 1 500 1,000 1 500 1,000

1,000 (20,000) 1,000 (10,000)

820 820

Cubis® Leveling

Select the type of leveling mode and enter “Ø” or “1” in the field identified by the icon in the order code.

Ø Cubis® shows the level indicator on the display and provides support for rapid leveling (a standard feature on

MSA and MSU display and control units; for MSE units, only symbols are provided to support manual leveling).

1 Fully automatic, motorized Q-Level leveling at the touch of a key (available for all Cubis

weighing modules with

a weighing capacity of > 6.1 g and < 6,200 g).

Test Certificates

Select a test certificate and enter the certificate type in the field identified by the icon in the order code.

ØØ Standard certificate of conformity to specifications

TR Like ØØ, but with a detailed test report

32 Technical Specifications

Cubis® Draft Shields

Select a draft shield and enter the identifier in the field identified by the corresponding icon in the order code.

Flat, stainless steel weigh pan with no draft shield for weighing modules with a pan size of 206 + 206 mm and 400 + 300 mm.

DR Flat, stainless steel weighing pan draft shield (removable, with no glass components) for all precision balances

with a readability of 1 mg and weighing module 5202S.

DE Manual, glass draft shield for all precision balances with a readability of 1 mg and weighing module 5202S.

DU Manual, glass analytical draft shield with smooth-action doors that open wide and provide unimpeded access to

the weighing chamber without interfering braces. For all models with 0.01 mg, 0.1 mg, and 1 mg readability and weighing module 5202S.

DA Automatic, glass motorized draft shield with learning capability for user-friendly operation and easy

customization to the changing requirements of different applications. For all models with 0.01 mg, 0.1 mg, and 1 mg readability and weighing module 5202S.

DI Identical to the DA draft shield, but also includes an integrated ionizer to eliminate interfering electrostatic

charges on samples and sample containers.

DM Automatic, motorized, round 100% glass draft shield with learning capability for ultra-micro and micro balances

with a readability of 0.0001 mg and 0.001 mg (2.7S, 6.6S and 3.6P weighing modules).

DF Manual, stainless steel draft shield for weighing filters with diameters of up to 50 mm (75 mm and 90 mm pans

optional) in ultra-micro and micro balances with a readability of 0.0001 mg and 0.001 mg (not for weighing module 3.6P). Designed to minimize the effects of static electricity.

Interface Module Options

For every balance, you can select an additional interface module.

IR RS-232 interface, 25-pin

Bluetooth

interface

IP RS-232 interface, 9-pin, incl. PS/2 interface

Cubis® Optional Accessories

Printers and Communication

Thermal Transfer/Direct Thermal Printer (order paper separately) YDP30 Standard paper & ink ribbon set for YDP30 (fade-resistant) 69Y03285 Self-adhesive paper & ink ribbon set for YDP30 (fade-resistant) 69Y03286 Self-adhesive labels for YAPP11 & YDP30, 58 × 100 mm (Qty 350) 69Y03094 Self-adhesive labels for YAPP11 & YDP30, 58 × 76 mm (Qty 500) 69Y03093 Self-adhesive labels for YAPP11 & YDP30, 58 × 30 mm (Qty 1,000) 69Y03092 Standard paper for direct thermal printing on YDP30, set of 5 rolls 69Y03287 Self-adhesive paper for direct thermal printing on YDP30, set of 5 rolls 69Y03288 Verifiable data printer for connection to RS-232, 25-pin, accessory interface YDP10-0CE Verifiable data printer with Bluetooth® data transmission (with YDO01MS-B or option IB only) YDP10BT-0CE Data printer, with statistics and time | date function YDP20-0CE

Ink ribbon for YDP10-0CE, YDP10BT-0CE, and YDP20-0CE 6906918 Paper rolls for printer YDP10-0CE, YDP10BT-0CE, and YDP20-0CE; 5 rolls, each with 50 m 6906937 Data interface Bluetooth® for wireless connection of data printer YDP10BT-0CE YDO01MS-B RS-232C data interface, 9-pin including PS/2 for connecting a computer or keyboard YDO01MS-P RS-232C data interface, 25-pin for connection of Cubis® accessories YDO01MS-R Display cable, 3 m, for Cubis® MSA and MSU models for detached setup of display and weighing unit

(installation by Sartorius Service or in factory [order VF4016]) Display cable, 3 m, for Cubis® MSE models, for detached setup of display and weighing unit

(installation by Sartorius Service or in factory [order VF4016]) Cable, 3 m, between weighing module and electronics module for Cubis® models

with 0.01 mg | 0.001 mg | 0.0001 mg readability Installation display cable 3 m for Cubis® models, for detached setup of display and weighing unit VF4016 25-pin RS232 to USB cable YCC01-USBM2 RS-232C connection cable to connect computer with 9-pin; COM interface, length 5 ft YCC05-001M2 Sartorius Wedge for Windows, software for data communication via USB and Ethernet (does not include cable) YSW02

YCC01-MSD3

YCC01-MSED3

YCC01-MSM3

Displays and Input|Output Elements

MSA control unit with color TFT graphic display and touch screen YAC01MSA MSE control unit with backlit liquid-crystal display and tactile keys YAC01MSE MSU control unit with backlit black | white graphic display and tactile navigation keys YAC01MSU Barcode scanner with connection cable for PS2, 120 mm reading range (1D only) YBR03PS2 QR | barcode reader with connection cable for PS2 YBR04PS2 Foot switch for printing, taring, or using a different function key; key function selectable by menu code,

incl. T-connector Infrared sensor for touch-free activation of functions (e.g., controlling the draft shield) YHS 01MS Hand switch for printing, taring, or using a different function key; key function selectable by menu code,

incl. T-connector Foot switch for activating the OPEN|CLOSE draft shield functions (only in combination with DA and

DI draft shield), taring and printing Additional display, LCD, digit height 13 mm, backlit YRD03Z 3-segment checkweighing display, red – green – red, for plus|minus measurements, incl. T-connector YR D11Z

The brand name and logo for The use of this brand name and trademark by Sartorius AG is under license. Other brand names and trademarks are the property of their respective owners.

Bluetooth®

wireless technology are the property of

Bluetooth®

SIG Inc.

YFS01

YHS02

YPE01RC

34 Technical Specifications

Pipette Calibration Hardware

Pipette calibration kit (hardware) for models with 0.1 mg and 0.01 mg readability Consists of moisture trap and all required adapters

Pipette calibration kit (hardware) for micro balance weighing module 6.6S Consists of moisture trap and all required adapters

Pipette Check Light V1. Pipette testing according to ISO 8655 for MSA display YAPP04 Pipette Check Advanced. Pipette testing according to ISO 8655, with pipette database and analysis of the

last test series via HTML for MSA display

Filter Weighing and Anti-static Accessories

Anti-static weighing pan, 130 mm diameter, for weighing modules with a readability of 0.1 mg or 0.01 mg YWP01MS Filter weighing pan, 75 mm diameter, for ultra-micro and micro balance models (weighing modules 6.6S, 2.7S;

only for DF draft shield) Filter weighing pan, 90 mm diameter, for ultra-micro and micro balance models (weighing modules 6.6S, 2.7S;

only for DF draft shield) Ionization blower to eliminate electrostatic charges on sample containers and samples YIB01- 0UR Stat-Pen ionization probe for discharging electrostatically charged samples and filters YSTP01

YCP04MS

VF988

YAPP042

VF2562

VF2880

Special Applications

Density determination kit for solids and liquids, for weighing modules with a readability

of 0.01 mg and 0.1 mg YDK01MS

Density determination kit for solids and liquids, for weighing modules with a readability of 1 mg YDK02MS Q-Grip, universal holder for containers used for weighing and filters up to a diameter of 120 mm (replaces the

original weighing pan; for Cubis Q-Grid weighing pan for Cubis

models with 0.01 and 0.1 mg readability)

models with a readability of 10 mg or 100 mg (pan size of 206 + 206 mm)

YFH01MS

YWP03MS for weighing in laboratory hoods, safety powder hoods or workbenches (reduces exposure of the weighing pan to lift by strong air current; replaces standard weighing pan)

Anti-Vibration Solutions

Balance table made of granite, for weighing with vibration dampening YWT03 Weighing table made of wood, with decoupled centered granite plate YWT09 Granite Platform (13" Granite Platform (16"

15") with vibration isolators

21") with vibration isolators

U1-21201315

U1-24201621

Weighing Accessories

Aluminum weighing boat, 4.5 mg (pack of 250) for ultra-micro and micro balance models U1-6565-250 Support arm for 10 | 100 mg precision weighing modules for raised mounting of MSE, MSU and MSA display

YDH01MS and control units

Support arm for precision weighing modules with 100 mg | 1 g readability and weighing capacity > 20 kg

YDH02MS for raised mounting of MSE, MSU and MSA display and control units

Hook for below-balance weighing; for precision weighing modules with 100 mg | 1 g readability and weighing

69EA0040 capacity > 20 kg

USA

Sartorius Corporation 5 Orville Drive, Suite 200 Bohemia, NY 11716

Phone +1.631.254.4249 Toll-free +1.800.635.2906 Fax +1.631.254.4253

www.sartorius.us

Canada

Sartorius Canada, Inc. 1173 North Service Road West D4 Oakville, ON L6M 2V9

Phone +1.905.569.7977 Toll-Free +1.800.668.4234 Fax +1.905.569.7021

www.sartorius.com

Specifications subject to change without notice.

Publication No.: WL-1010am170601 · Order No.: 98649-011-75 · Ver. 06 | 2017

Sartorius MSE8201S-ED15, MSE8202S-000-D0, MSE623S-100-DE, MSA225S100DI, MSA225P100DI Data Sheet

Specifications and Main Features

Frequently Asked Questions

User Manual

Cubis® Premium Laboratory Balances

Contents

4 Modularity

6 Operating Design

8 Q-Apps

Applications

12 Leveling

14 Communication

16 Draft Shield

18 Micro Balances

22 Safe Weighing

Advanced Pharma Compliance

Technical Specifications