Sartorius MCA324S-2S00-U, MCA3203SE-S00, MCA324S-2S00-I, MCA4202S-2S00-0, MCA36201S0-S00 Data Sheet

Cubis® II

The New Generation of
Modular Premium Balances

Highlights

• Leading performance. Monolithical weighing system, integrated
climate sensors, individual sample holders

• Error-free operation. Individual QApp workflows, motorized
auto-leveling*

• Full end-to-end data integrity. 21 CFR Part 11 compliance,
integrated audit-trail, state-of-the-art user management

• Oustanding service support. Integrated status center, integrated
service functions preventive maintenance on accredited
standards

* For all models up to a maximum capacity of 8.2 kg

Product Information

The modular weighing system Cubis® II can be individually configured from different components. The combinability
of the display unit, weighing module, draft shield, software packages for various applications and functions and a
comprehensive range of accessories allows the individual adaptation of the Cubis® II balance to all weighing tasks.
The Cubis® II range of premium laboratory balances with a maximum load between 2.1 g and 70 kg and a readability
between 0.1 μg to 1 g provide the ideal model for every application.

Cubis® II Display and Control Units

Type MCA
Display Large high end 7” color touch TFT display in 16:9

format with new user interface

Software Factory installed basic set of essential weighing

applications (license free) and Packages with
special weighing applications and function
extensions (license required)

Operation Activated by touch key, touch-free using IR sensor

(draft shield M) or gesture sensor (optional),
learning capability

Type MCE
Display State of the art TFT touch screen operation with

brilliant, readable, display but uncomplex, easy to
operate user interface

Software Factory installed basic set of essential weighing

applications

Operation Activated by touch key, touch-free using IR sensor

(draft shield M) or gesture sensor (optional),
learning capability

Cubis® II

Technical Specifications

Cubis® II Weighing Modules
Ultra-Micro Balances 0.0001 mg

2.7S

Scale interval (d) mg 0.0001
Maximum capacity (Max) g 2.1

Repeatability at 5 % load

Standard deviation of the load values, tolerance mg 0.0002
Standard deviation of the load values, typical value mg 0.00015

Repeatability near Max

Standard deviation of the load values, tolerance mg 0.00025
Standard deviation of the load values, typical value mg 0.00018

Linearity Deviation

Tolerance mg 0.0009
Typical value mg 0.0007

Deviation at eccentric loading, positions according to OIML R76

Test weight g 1
Tolerance mg 0.0007
Typical value mg 0.0005
Sensitivity drift between +10 °C and +30 °C ppm/K 1

Tare maximum capacity: Less than 100 % of maximum capacity

Accuracy class according to Directive 2014/31/EU I
Verification scale interval (e) according to Directive 2014/31/EU mg 1
Minimum load (Min) according to Directive 2014/31/EU mg 0.01

Minimum weight according to USP (United States Pharmacopeia), Chap. 41

Optimum minimum weight mg 0.082
Typical minimum weight mg 0.3
Typical stabilization time s 7
Typical measurement time s 10

Recommended calibration weight

External test load g 2
Accuracy class, acc. to OIML R111-1 E2

Dimensions

MCE/MCA Weighing module (L × W × H)* mm 340 x 139 x 129
MCE Electronics module (L × W × H) mm 315 x 240 x 61
MCA Electronics module (L x W x H) mm 355 x 240 x 61
Weighing pan size mm Ø 20
Filter weighing pan mm Ø 50
Weight, approx.* kg 6.4/7.1

* depending upon weighing pan size, filter weighing pan and draft shield

Cubis® II Weighing Modules
Micro Balances 0.001 mg

10.6S 6.6S 3.6P

Scale interval (d) mg 0.001 0.001 0.001 | 0.002 | 0.005
Maximum capacity (Max) g 10.1 6.1 1.1 | 2.1 | 3.1

Repeatability at 5 % load

Standard deviation of the load values, tolerance mg 0.001 0.001 0.003
Standard deviation of the load values, typical value mg 0.0005 0.0005 0.0005

Repeatability near Max

Standard deviation of the load values, tolerance mg 0.001 0.001 0.005
Standard deviation of the load values, typical value mg 0.0006 0.0006 0.0006

Linearity Deviation

Tolerance mg 0.004 0.004 0.004
Typical value mg 0.003 0.003 0.003

Deviation at eccentric loading, positions according to OIML R76

Test weight g 5 2 1
Tolerance mg 0.004 0.004 0.005
Typical value mg 0.003 0.003 0.003
Sensitivity drift between +10 °C and +30 °C ppm/K 1 1 1

Tare maximum capacity: Less than 100 % of maximum capacity

Accuracy class according to Directive 2014/31/EU I I I
Verification scale interval (e) according to Directive 2014/31/EU mg 1 1 1
Minimum load (Min) according to Directive 2014/31/EU mg 0.1 0.1 0.1

Minimum weight according to USP (United States Pharmacopeia), Chap. 41

Optimum minimum weight mg 0.82 0.82 0.82
Typical minimum weight mg 0.82 0.82 0.82
Typical stabilization time s 5 5 5
Typical measurement time s 8 8 8

Recommended calibration weight

External test load g 10 5 3
Accuracy class, acc. to OIML R111-1 E2 E2 E2

Dimensions

MCE/MCA Weighing module (L × W × H)* mm 340 x 139 x 129 340 x 139 x 129 340 x 139 x 129
MCE Electronics module (L × W × H) mm 315 x 240 x 61 315 x 240 x 61 315 x 240 x 61
MCA Electronics module (L x W x H) mm 355 x 260 x 61 355 x 260 x 61 355 x 260 x 61
Weighing pan size mm Ø 30 Ø 30 Ø 30
Filter weighing pan mm Ø 50 Ø 50 Ø 50
Weight, approx.* kg 6.4/7.1 6.4/7.1 6.4/7.1

* depending upon weighing pan size, filter weighing pan and draft shield

Cubis® II 3

Cubis® II Weighing Modules
Semi-Micro Balances 0.01 mg

225S 225P 125S 125P

Scale interval (d) mg 0.01 0.01 | 0.02 | 0.05 0.01 0.01 | 0.1
Maximum capacity (Max) g 220 60 | 120 | 220 120 60 | 120

Repeatability at 5 % load

Standard deviation of the load values, tolerance mg 0.015 0.015 0.015 0.015
Standard deviation of the load values, typical value mg 0.01 0.01 0.01 0.01

Repeatability near Max

Standard deviation of the load values, tolerance mg 0.025 0.04 0.025 0.06
Standard deviation of the load values, typical value mg 0.02 0.02 0.02 0.02

Linearity Deviation

Tolerance mg 0.1 0.15 0.1 0.15
Typical value mg 0.065 0.1 0.065 0.1

Deviation when load is off-center, positions according to OIML R76

Test weight g 100 100 50 50
Tolerance mg 0.15 0.2 0.15 0.2
Typical value mg 0.1 0.1 0.1 0.1
Sensitivity drift between +10 °C and +30 °C ppm/K 1 1 1 1

Tare maximum capacity: Less than 100 % of maximum capacity

Accuracy class according to Directive 2014/31/EU I I I I
Verification scale interval (e) according to Directive 2014/31/EU mg 1 1 1 1
Minimum load (Min) according to Directive 2014/31/EU mg 1 1 1 1

Minimum weight according to USP (United States Pharmacopeia), Chap. 41

Optimum minimum weight mg 8.2 8.2 8.2 8.2
Typical minimum weight mg 13 13 13 13
Typical stabilization time s 2 2 2 2
Typical measurement time s 6 6 6 6

Recommended calibration weight

External test load g 200 200 100 100
Accuracy class, acc. to OIML R111-1 E2 E2 E2 E2

Dimensions

MCE/MCA Weighing module (L × W × H)* mm 404 x 240 x 373
MCE Electronics module (L × W × H) mm 315 x 240 x 61
MCA Electronics module (L x W x H) mm 355 x 240 x 61
Weighing pan size mm 85 x 85
Weight, approx.* kg 10.2/11.7

* depending upon weighing pan size, filter weighing pan and draft shield

Cubis® II Weighing Modules
Analytical Balances 0.1 mg

524S 524P 324S 324P 224S 124S

Scale interval (d) mg 0.1 0.1 | 0.2 | 0.5 0.1 0.1 | 0.2 | 0.5 0.1 0.1
Maximum capacity (Max) g 520 120 | 240 | 520 320 80 | 160 | 320 220 120

Repeatability at 5 % load

Standard deviation of the load values, tolerance mg 0.08 0.08 0.08 0.08 0.07 0.1
Standard deviation of the load values, typical

value

mg 0.04 0.04 0.04 0.04 0.05 0.05

Repeatability near Max

Standard deviation of the load values, tolerance mg 0.1 0.15 0.1 0.1 0.07 0.1
Standard deviation of the load values, typical

value

mg 0.05 0.05 0.05 0.05 0.05 0.05

Linearity Deviation

Tolerance mg 0.4 0.5 0.3 0.5 0.2 0.2
Typical value mg 0.2 0.2 0.2 0.2 0.13 0.13

Deviation when load is off-center, positions according to OIML R76

Test weight g 200 200 200 200 100 50
Tolerance mg 0.3 0.4 0.3 0.4 0.2 0.2
Typical value mg 0.2 0.2 0.2 0.2 0.12 0.12
Sensitivity drift between +10 °C and +30 °C ppm/K 1 1 1 1 1 1

Tare maximum capacity: Less than 100 % of maximum capacity

Accuracy class according to Directive
2014/31/EU

Verification scale interval (e) according to
Directive 2014/31/EU

Minimum load (Min) according to Directive
2014/31/EU

mg 1 1 1 1 1 1

mg 10 10 10 10 10 10

I I I I I I

Minimum weight according to USP (United States Pharmacopeia), Chap. 41

Optimum minimum weight mg 82 82 82 82 82 82
Typical minimum weight mg 82 82 82 82 100 100
Typical stabilization time s 1 1 1 1 1 1
Typical measurement time s 3 3 3 3 3 3

Recommended calibration weight

External test load g 500 500 300 300 200 100
Accuracy class, acc. to OIML R111-1 E2 E2 E2 E2 E2 E2

Dimensions

Weighing module (L × W × H)* mm 425 x 240 x 373
Weighing pan size mm 85 x 85
Weight, approx.* kg 8.2/10.0

* depending upon weighing pan size, filter weighing pan and draft shield

Cubis® II 5

Cubis® II Weighing Modules
Precision Balances

5203S 5203P 3203S 2203S 2203P 1203S

Scale interval (d) mg 1 1 | 2 | 5 1 1 1 | 10 1
Maximum capacity (Max) g 5200

1200 | 2400 | 5200

3200 2200 1010 | 2200 1200

Repeatability at 5 % load

Standard deviation of the load values,
tolerance

Standard deviation of the load values, typical
value

mg 1 1 1 0.7 0.7 0.7

mg 0.6 0.6 0.6 0.5 0.5 0.5

Repeatability near Max

Standard deviation of the load values,
tolerance

Standard deviation of the load values, typical
value

mg 1 1 1 1 1 0.7

mg 0.6 0.6 0.6 0.6 0.6 0.6

Linearity Deviation

Tolerance mg 5 5 5 3 5 2
Typical value mg 2 3 2 2 3 1

Deviation when load is off-center, positions according to OIML R76

Test weight g 2000 2000 1000 1000 1000 500
Tolerance mg 2 2 2 2 3 2
Typical value mg 1 1 1 1 2 1
Sensitivity drift between +10 °C and +30 °C ppm/K 1 1 1 1 1 1.5

Tare maximum capacity: Less than 100 % of maximum capacity

Accuracy class according to Directive
2014/31/EU

Verification scale interval (e) according to
Directive 2014/31/EU

Minimum load (Min) according to Directive
2014/31/EU

mg 10 10 10 10 10 10

mg 100 100 100 100 100 100

I I I I I I

Minimum weight according to USP (United States Pharmacopeia), Chap. 41

Optimum minimum weight mg 820 820 820 820 820 820
Typical minimum weight mg 1200 1200 1200 1000 1000 1000
Typical stabilization time s 1 1 1 1 1 1
Typical measurement time s 2 2 2 1.5 1.5 1.5

Recommended calibration weight

External test load g 5000 5000 3000 2000 1000 1000
Accuracy class, acc. to OIML R111-1 E2 E2 E2 E2 E2 E2

Dimensions

Weighing module (L × W × H)* mm 425 x 240 x 122/284/373
Weighing pan size mm 140 x 140
Weight, approx.* kg 5.9/7.5/9.4/10.2

* depending upon weighing pan size, filter weighing pan and draft shield

Cubis® II Weighing Modules
Precision Balances

623S 623P 323S 14202S 14202P

Scale interval (d) mg 1 1 / 2 / 5 1 10 10 | 20 | 50
Maximum capacity (Max) g 620 150 | 300 | 620 320 14200 3500 | 7000 | 14200

Repeatability at 5 % load

Standard deviation of the load values,
tolerance

Standard deviation of the load values, typical
value

mg 0.7 1 0.7 10 10

mg 0.4 0.4 0.4 5 5

Repeatability near Max

Standard deviation of the load values,
tolerance

Standard deviation of the load values, typical
value

mg 0.7 1 0.7 10 10

mg 0.5 0.5 0.5 5 5

Linearity Deviation

Tolerance mg 2 5 2 30 50
Typical value mg 0.6 1.5 0.6 10 20

Deviation when load is off-center, positions according to OIML R76

Test weight g 200 200 200 5000 5000
Tolerance mg 2 4 2 20 40
Typical value mg 1 3 1 10 10
Sensitivity drift between +10 °C and +30 °C ppm/K 2 2 2 1.5 1.5

Tare maximum capacity: Less than 100 % of maximum capacity

Accuracy class according to Directive
2014/31/EU

Verification scale interval (e) according to
Directive 2014/31/EU

Minimum load (Min) according to Directive
2014/31/EU

mg 10 10 10 100 100

mg 20 20 20 1000 1000

II II II II II

Minimum weight according to USP (United States Pharmacopeia), Chap. 41

Optimum minimum weight mg 820 820 820 8200 8200
Typical minimum weight mg 820 820 820 8200 8200
Typical stabilization time s 0.8 0.8 0.8 0.8 0.8
Typical measurement time s 1 1 1 1.5 1.5

Recommended calibration weight

External test load g 500 500 200 14000 14000
Accuracy class, acc. to OIML R111-1 E2 E2 E2 E2 E2

Dimensions

Weighing module (L × W × H)* mm 425 x 240 x 122/284/373 425 x 240 x 95
Weighing pan size mm 140 x 140 206 x 206
Weight, approx.* kg 5.9/7.5/9.4/10.2 5.4

* depending upon weighing pan size, filter weighing pan and draft shield

Cubis® II 7

Cubis® II Weighing Modules
Precision Balances

10202S 8202S 6202S 6202P 5202S 4202S 2202S

Scale interval (d) mg 10 10 10 10 | 20 | 50 10 10 10

Maximum capacity (Max) g 10200 8200 6200

1500 | 3000
|6200

5200 4200 2200

Repeatability at 5 % load

Standard deviation of the load values,
tolerance

Standard deviation of the load values,
typical value

mg 7 7 7 7 6 7 7

mg 5 4 4 4 2 4 4

Repeatability near Max

Standard deviation of the load values,
tolerance

Standard deviation of the load values,
typical value

mg 7 7 7 40 6 7 7

mg 5 4 4 15 2 4 4

Linearity Deviation

Tolerance mg 20 20 20 50 10 20 20
Typical value mg 6 6 6 20 5 6 6

Deviation when load is off-center, positions according to OIML R76

Test weight g 5000 5000 2000 2000 2000 2000 1000
Tolerance mg 20 20 20 50 10 30 20
Typical value mg 10 10 10 30 5 10 10
Sensitivity drift between +10 °C and +30 °C ppm/K 1.5 2 2 2 2 2 2

Tare maximum capacity: Less than 100 % of maximum capacity

Accuracy class according to Directive
2014/31/EU

Verification scale interval (e) according to
Directive 2014/31/EU

Minimum load (Min) according to Directive
2014/31/EU

mg 100 100 100 100 100 100 100

mg 1000 500 500 500 1000 500 500

II II II II I II II

Minimum weight according to USP (United States Pharmacopeia), Chap. 41

Optimum minimum weight mg 8200 8200 8200 8200 8200 8200 8200
Typical minimum weight mg 8200 8200 8200 8200 8200 8200 8200
Typical stabilization time s 0.8 1 1 1 0.8 1 0.8
Typical measurement time s 1.5 1.5 1.5 1.5 1 1 1.5

Recommended calibration weight

External test load g 10000 7000 5000 5000 5000 3000 1500
Accuracy class, acc. to OIML R111-1 E2 E2 E2 E2 E2 E2 E2

Dimensions

Weighing module (L × W × H)* mm 425 x 240 x 95

425 x 240 x
122/284/373

425 x 240 x 95

Weighing pan size mm 206 x 206 140 x 140 206 x 206

Weight, approx.* kg 5.4 5.9/ 7.5/9.4/10.2 5.4

* depending upon weighing pan size, filter weighing pan and draft shield

Cubis® II Weighing Modules
Precision Balances

1202S 12201S 8201S 5201S

Scale interval (d) mg 10 100 100 100
Maximum capacity (Max) g 1200 12200 8200 5200

Repeatability at 5 % load

Standard deviation of the load values, tolerance mg 7 50 50 50
Standard deviation of the load values, typical value mg 4 20 20 20

Repeatability near Max

Standard deviation of the load values, tolerance mg 7 50 50 50
Standard deviation of the load values, typical value mg 4 20 20 20

Linearity Deviation

Tolerance mg 20 100 100 100
Typical value mg 6 30 30 20

Deviation when load is off-center, positions according to OIML R76

Test weight g 500 5000 2000 2000
Tolerance mg 20 200 200 200
Typical value mg 10 100 100 100
Sensitivity drift between +10 °C and +30 °C ppm/K 2 4 4 4

Tare maximum capacity: Less than 100 % of maximum capacity

Accuracy class according to Directive 2014/31/EU II II II II
Verification scale interval (e) according to Directive 2014/31/EU mg 100 1000 1000 1000
Minimum load (Min) according to Directive 2014/31/EU mg 500 5000 5000 5000

Minimum weight according to USP (United States Pharmacopeia), Chap. 41

Optimum minimum weight mg 8200 82000 82000 82000
Typical minimum weight mg 8200 82000 82000 82000
Typical stabilization time s 0.8 0.8 0.8 0.8
Typical measurement time s 1 1 1 1

Recommended calibration weight

External test load g 700 12000 8000 5000
Accuracy class, acc. to OIML R111-1 E2 F1 F1 F1

Dimensions

Weighing module (L × W × H)* mm 425 x 240 x 95
Weighing pan size mm 206 x 206
Weight, approx.* kg 5.4

* depending upon weighing pan size, filter weighing pan and draft shield

Cubis® II 9

Cubis® II Weighing Modules
High Capacity Balances

32202P 70201S 50201S 36201S 36201P

Scale interval (d) mg 10 | 100 100 100 100 100|1000
Maximum capacity (Max) g 4200 | 32200 70200 50200 36200 10200 | 36200

Repeatability at 5 % load

Standard deviation of the load values, tolerance mg 40 100 100 100 100
Standard deviation of the load values, typical value mg 20 40 40 20 20

Repeatability near Max

Standard deviation of the load values, tolerance mg 40 | 100 100 100 100 100
Standard deviation of the load values, typical value mg 20 | 50 40 40 50 20

Linearity Deviation

Tolerance mg 20 500 500 200 200
Typical value mg 10 150 150 100 100

Deviation when load is off-center, positions according to OIML R76

Test weight g 10000 20000 20000 10000 10000
Tolerance mg 200 500 500 300 300
Typical value mg 100 150 150 200 200
Sensitivity drift between +10 °C and +30 °C ppm/K 2 4 4 4 2

Tare maximum capacity: Less than 100 % of maximum capacity

Accuracy class according to Directive 2014/31/EU – II II II II
Verification scale interval (e) according to Directive

2014/31/EU
Minimum load (Min) according to Directive

2014/31/EU

mg – 1000 1000 1000 1000

mg – 5000 5000 5000 5000

Minimum weight according to USP (United States Pharmacopeia), Chap. 41

Optimum minimum weight mg 8200 82000 82000 82000 82000
Typical minimum weight mg 8200 82000 82000 82000 82000
Typical stabilization time s 2 1.5 1.5 1.5 1.5
Typical measurement time s 2 1.5 1.5 2 2

Recommended calibration weight

External test load g 30000 70000 50000 30000 30000
Accuracy class, acc. to OIML R111-1 F1 F1 F1 F1 F1

Dimensions

Weighing module (L × W × H)* mm 412 x 400 x 126/159
Weighing pan size mm 400 x 300/Ø 233
Weight, approx.* kg 15.8/17.1

* depending upon weighing pan size, filter weighing pan and draft shield

Cubis® II Weighing Modules
High Capacity Balances

20201S 11201S 70200S 36200S

Scale interval (d) mg 100 100 1000 1000
Maximum capacity (Max) g 20200 11200 70200 36200

Repeatability at 5 % load

Standard deviation of the load values, tolerance mg 100 100 500 500
Standard deviation of the load values, typical value mg 20 20 20 20

Repeatability near Max

Standard deviation of the load values, tolerance mg 100 100 500 500
Standard deviation of the load values, typical value mg 20 20 20 20

Linearity Deviation

Tolerance mg 200 200 1000 1000
Typical value mg 60 60 200 200

Deviation when load is off-center, positions according to OIML R76

Test weight g 5000 5000 20000 10000
Tolerance mg 300 300 1000 1000
Typical value mg 200 200 600 500
Sensitivity drift between +10 °C and +30 °C ppm/K 2 2 3 3

Tare maximum capacity: Less than 100 % of maximum capacity

Accuracy class according to Directive 2014/31/EU II II II II
Verification scale interval (e) according to Directive 2014/31/EU mg 1000 1000 10000 1000
Minimum load (Min) according to Directive 2014/31/EU mg 5000 5000 50000 50000

Minimum weight according to USP (United States Pharmacopeia), Chap. 41

Optimum minimum weight mg 82000 82000 820000 820000
Typical minimum weight mg 82000 82000 820000 820000
Typical stabilization time s 1.5 1.5 1 1
Typical measurement time s 2 2 1.2 1.2

Recommended calibration weight

External test load g 20000 10000 70000 30000
Accuracy class, acc. to OIML R111-1 F1 F1 F1 F1

Dimensions

Weighing module (L × W × H)* mm 412 x 400 x 126/159
Weighing pan size mm 400 x 300/Ø 233
Weight, approx.* kg 15.8/17.1

* depending upon weighing pan size, filter weighing pan and draft shield

Cubis® II 11

Accessories

Cubis® II Power Supply Unit

Only by Sartorius AC Adapter YEPS03-15V0 Unit Value

Primary

AC voltage V
Frequency Hz
Current consumption, maximum A 1.0

Secondary

DC voltage at 2 A output current V 14.25–15.75
Power, maximum W 30
Short circuit protection: Electronic
Protection class according to IEC 62368-1 I
Pollution level according to IEC 61010-1 2
Overvoltage category according to IEC 606641-1 II
Installation site according to IEC 62368-1, maximum altitude above sea level m 5000

Temperature

In operation °C 0 – +40
During storage and transport °C -20 – +80
Connector for mains connection according to IEC 60320-1 / C14: 3-pin

100–240 (±10%)
50–60 (±5%)

Power supply cable

Power supply cable according to IEC 60320-1 / C14: Country-specific, 3-pin, two-sided plug
Other data: See label on AC adapter

Safety of Electrical Equipment

According to EN 61010-1 / IEC 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use
– Part 1: General Requirements

Electromagnetic Compatibility

Interference resistance

Suitable for use in industrial areas

Transient emissions

Class B
Suitable for use in residential areas and areas that are connected to a low voltage network that also supplies residential buildings.

Materials

Housing: Die-cast aluminum, plastic PBT, Optiwhite float glass and stainless steel 1.4401/1.4404, PA handles, aluminum trim
Control unit: Die-cast aluminum, painted, float glass and plastic PBT, PP

Integrated Clock

Maximum deviation per month (RTC): 30s

Backup Battery

Lithium battery: type CR2032
Service life at room temperature, minimum: 10 Years

Alibi Memory Value

Maximum number of data records: 150,000

Interfaces

Specifications for the COM-RS232 Interface

Type of interface: Serial interface
Interface operation: Full duplex
Level: RS232
Connection: D-sub connector, 9-pin

Pin assignment: Pin 1: Not assigned

Pin 2: Data output (TxD)
Pin 3: Data input (RxD)

1

6

Specifications for the USB-A Interface

Communication: USB host (master)
Connectable devices: Sartorius printers, USB sticks with software update

Specifications for the USB-B Interface

Communication: USB device (slave)
Type of interface: Virtual serial interface (virtual COM-port, VCP) and “PC direct” communication

5

9

Pin 4: Not assigned
Pin 5: Internal ground
Pin 6: Not assigned
Pin 7: Clear to Send (CTS)
Pin 8: Request to Send (RTS)
Pin 9: Not assigned

Cubis® II 13

Ambient Conditions

Unit Value

Installation Site

AC voltage
Frequency

V
Hz

100–240 (±10%)
50–60 (±5%)

Current consumption, maximum A 1.0

Secondary

Standard laboratory rooms
Installation site according to IEC 60259-1, maximum altitude above sea level m 3000
For indoor use only

Temperature

In operation °C +5 – +40
In operation for conformity-assessed devices: See information on the device’s ID plate
During storage and transport °C -20 – +60

Relative humidity

At temperatures of up to 31 °C % 80
Then linear decrease from 80 % at 31 °C to 50 % at 40 °C

No heat from heating systems or direct sunlight
No drafts from open windows, AC systems, or doors
No vibrations
No “heavy traffic” areas (personnel)
No electromagnetic fields
No dry air

Meteorological Data

Code Item

SØØ Standard version non-verified, all units
S01 Standard version non-verified, metric units only
CCN Balance with Type Approval Certificate for China
CEU Verified balance with EC Type Approval Certificate (for EU except France)
CFR Verified balance with EC Type Approval Certificate for France only
OBR Balance with Type Approval Certificate for Brazil
OIN Balance with Type Approval Certificate for India
OJP Balance with Type Approval Certificate for Japan
ORU Balance with Type Approval Certificate for Russia

Draft Shields

Code Item

0 Flat, stainless steel weight pan with no draft shield for weighing modules.
A Automatic, glass motorized draft shield with learning capability for user-friendly operation and easy customization to

the changing requirements of different applications.

E Manual glass draft shield for precision balances.
F Manual stainless steel draft shield for weighing filters with diameters of up to 50 mm (75 mm and 90 mm pans

optional).

I Identical to the A draft shield, but also includes an integrated ionizer to eliminate interfering electrostatic charges on

samples and sample containers.

M Automatic, motorized, round 100% glass draft shield with learning capability for ultra-microbalance and microbalances.
R Flat, stainless steel weighing pan draft shield (removable, with no glass components) for all precision balances
U Manual glass analytical draft shield chamber, with smooth-action doors that open wide and provide unimpeded access

to the weighing chamber without interfering braces.

Software

Code Item

QP1 Q-App Package Pharma
QP2 Q-App Package Advanced Applications
QP3 Q-App Package Utilities
QP4 Q-App Package Connectivity

Accessories

Printers and Communication Quantity Order number

Thermal transfer | thermal printer for GLMP printouts on continuous paper and labels 1 YDP30
Standard paper and ink ribbon, set, 90 m, for YDP30 1 69Y03285
Self-adhesive paper and ink ribbon, 90 m, for YDP30 1 69Y03286
Standard thermal paper, 24 m roll, for YDP30 | YDP40 5 69Y03287
Self-adhesive thermal paper, 13 m roll, for YDP30 5 69Y03288
Self-adhesive labels for YDP30
58 mm × 100 mm 350 69Y03094
58 mm × 76 mm 500 69Y03093
58 mm × 30 mm 1000 69Y03092
Display cable, 3 m, for separate installation of display and weighing units, installation by Sartorius

1 On request

Service or at the factory
RS232C connection cable, 9-pin, 3 m, for connection to a PC with 9-pin COM interface 1 On request
Sartorius Wedge, software for data communication between the PC and balance 1 YSW02

Cubis® II 15

Accessories (continued)

Displays and Input/Output Elements Quantity Order number

MCE Display and control unit with color TFT display, touch screen, and keys 1 69ME0212
MCA Display and control unit with high-contrast display, touch screen, and keys 1 69MA0218
Motion sensor for triggering a maximum of 4 functions via gesture control, selection via menu 1 YHS02MS
Display stand for weigh cells with scale interval of 100 mg | 1 g and weighing capacity > 20 kg for

raising the operating unit
Display stand for weigh cells with scale interval of 10 mg | 100 mg for raising the operating unit 1 YDH03MS

Hardware for Pipette Calibration (Semi-Micro and Analytical balances) Quantity Order number

Pipette calibration kit (hardware). Consists of moisture trap and all required adapters 1 YCP04MS

Density Determination Kits Quantity Order number

Density determination kit for solids and liquids for 0.1 and 0.01 mg weighing modules 1 YDK03MS
Density determination kit for solids and liquids for 1 mg weighing modules 1 YDK04MS

Filter Pans, Ionizer and Weighing Scoops Quantity Order number

Grid pan for model with a scale interval of 10 mg or 100 mg for weighing in laboratory hoods,
safety barries and workbenches, reduced wind attack surface of the weighing pan, replaces standard
pan

Anti-static weighing pan, 100 mm diameter, for weighing module for semi-mnicrobalance and
analytical balances with 0.1 mg or 0.01 mg scale interval

Filter weighing pan made of Titanium, diameter 52 mm, for ultra-micro and micro-balances only
together with F draft shield

Filter weighing pan made of Titanium, diameter 75 mm, for ultra-micro balance or micro balance
models only together with F draft shield

Filter weighing pan made of Titanium, diameter 90 mm, for ultra-micro balance or micro balance
models only together with F draft shield

Ionization blower for electrostatically charged samples 1 YIB01-ODR
Ionizer with u-shaped electrode for 230 V 1 YIB02-230V
Ionizer with u-shaped electrode for 115 V 1 YIB02-115V
Stat-Pen ionization pen for discharging electrostatically charged samples 1 YSTP01
Aluminum weighing scoop, 4.5 mg for ultramicrobalance and microbalance models 250 6565-250
Aluminum weighing scoop, 52 mg for ultramicrobalance and microbalance models 50 6566-50
Weighing scoop made from chrome-nickel steel, L 90 mm x W 32 mm x H 8 mm 1 641214

1 YDH04MS

1 YWP07MS

1 YWP04MS

1 YSH34

1 YSH35

1 YSH36

Other Accessories Quantity Order number

Below-balance weighing hook for precision balances with scale interval of 100 mg | 1 g and
weighing capacity > 20 kg, not for verified models

Weighing Tables Quantity Order number

Made from synthetic stone, with vibration dampening 1 YWT03
Made from wood with synthetic stone 1 YWT09
Wall console 1 YWT04

1 69EA0040

Accessories (continued)

Climate Modules (available July 2019) Quantity Order number

Climate module, uncalibrated, for draft shield A or I and user interface MCA 1 YCM20MC
Calibration of a climate module YCM20MC with DAkkS calibration certificate 1 YCM20DAkkS
Climate module with DAkkS calibration certificate for draft shield A or I and user interface MCA 1 YCM20MC-DAkkS
Tower for climate module, for mounting YCM20MC; can be ported to all Cubis II weighing modules

with user interface MCA

Flexible Sample Holder (available July 2019) Quantity Order number

For weighing vessels and filters with diameters of up to 120 mm, replaces the original weighing pan,
for semi-microbalance and analytical balance

Titanium Holders for Ultra-Micro Balances and Micro Balances (available July 2019) Quantity Order number

For coronary stents (up to 38 mm) 1 YSH10

For save-lock tubes, 1.5 ml - 2 ml 1 YSH13

Titanium Holders for Semi-Micro Balances and Analytical Balances (available July 2019) Quantity Order number

Q-Grid weighing pan for 10 mg or 100 mg balances 1 YWP07MS
For save-lock tubes, 1.5 ml – 2 ml

1 YCM20MC Tower

1 YFH01MS

1

YSH15

For save-lock tubes up to 5 ml

For vials

For weighing boats

For filters, 150 mm diameter

For titration vessels and round bottom flasks

For syringes, vertical

1

1

1

1

1

1

YSH19

YSH23

YSH26

YSH30

YSH37

YSH46

Cubis® II 17

Balance Dimensions

Ultra-Micro Balance

All dimensions are given in millimeters

129

121

80

67

35

50

70

244

110

139

246

MCA

24 0

211

MCE

211

315

355

240

Micro Balance

84

All dimensions are given in millimeters

345

246

109

115.5

MCA

240

211

355

129

94

78

35

50

70

244

19

110

139

MCE

211

315

240

Cubis® II 19

Semi-Micro Balance

MCE

All dimensions are given in millimeters

252

167

206

360

MCA

261

373

56

170

217

211

240

450

300

206

173

211

240

92

261

373

360

125

128

210

404

217

300

56

211

211

240

173

240

92

Analytical Balance

MCE

All dimensions are given in millimeters

252

167

206

MCA

373

359

240

205

261

92

170

125

210

217

470

105

240

320

206

211

240

240

205

261

373

359

128

425

217

320

105

240

211

240

92

Cubis® II 21

Precision Balance

MCA

MCE

All dimensions are given in millimeters

214.5
206

MCA

214.5
206

95

272

470

214.5
206

320

213173

105

240

211

240

249

MCE

214.5
206

95

128

227

425

213

320

211

240

249

105

240

High-Capacity Balance

All dimensions are given in millimeters

126 ±1

365

400

240

MCA

33 265

31

16

300

±2

444

400

240

31

16

300

412 ±2

MCE

Cubis® II 23

Sales and Service Contacts

For further contacts, visit www.sartorius.com

Europe

Germany

Sartorius Lab Instruments
GmbH & Co. KG
Otto-Brenner-Strasse 20
37079 Goettingen

Phone [phone]
Fax [phone]

France & Suisse Romande

Sartorius France
2, rue Antoine Laurent de Lavoisier
ZA de la Gaudrée
91410 Dourdan

Phone [phone]
Fax [phone]

Austria

Sartorius Austria GmbH
Modecenterstrasse 22
1030 Vienna

Phone [phone]
Fax [phone]

Belgium

Sartorius Belgium N.V.
Rue Colonel Bourg 105
1030 Bruxelles

Phone [phone]
Fax [phone]

Finland & Baltics

Sartorius Biohit Liquid Handling Oy
Laippatie 1
00880 Helsinki

Phone [phone]
Fax [phone]

Hungary

Sartorius Hungária Kft.
Kagyló u. 5.
2092 Budakeszi

Phone [phone]
Fax [phone]

Ireland

Sartorius Ireland Ltd.
Unit 41, The Business Centre
Stadium Business Park
Ballycoolin Road
Dublin 11

Phone [phone]
Fax [phone]

Italy

Sartorius Italy S.r.l.
Via Torino 3/5
20814 Varedo (MB)

Phone [phone]
Fax [phone]

 www.sartorius.com

Netherlands

Sartorius Netherlands B.V.
Phone [phone]

Fax [phone]
[e-mail]

Poland

Sartorius Poland sp.z o.o.
ul. Wrzesinska 70
62-025 Kostrzyn

Phone [phone]
Fax [phone]

Russian Federation

LLC “Sartorius RUS”
Vasilyevsky Island

th

5

line 70, Lit. A

199178 St. Petersburg
Phone [phone]

Fax [phone]

Spain & Portugal

Sartorius Spain, S.A.
Avda. de la Industria, 32
Edificio PAYMA
28108 Alcobendas (Madrid)

Phone Spain +34.913.586.095
Phone Portugal +351.800.855.800
Fax Spain +34.913.589.623
Fax Portugal +351.800.855.799

Switzerland

Sartorius Mechatronics Switzerland AG
Ringstrasse 24a
8317 Tagelswangen (ZH)

Phone [phone]
Fax [phone]

U.K.

Sartorius UK Ltd.
Longmead Business Centre
Blenheim Road, Epsom
Surrey KT19 9QQ

Phone [phone]
Fax [phone]

Ukraine

LLS “Sartorius RUS”
Post Box 440 “B”
01001 Kiev, Ukraine

Phone [phone]
Fax [phone]

Americas

USA

Sartorius Corporation
5 Orville Drive, Suite 200
Bohemia, NY 11716

Phone [phone]
Toll-free +1.800.635.2906
Fax [phone]

Argentina

Sartorius Argentina S.A.
Int. A. Ávalos 4251
B1605ECS Munro
Buenos Aires

Phone [phone]
Fax [phone]

Brazil

Sartorius do Brasil Ltda
Avenida Senador Vergueiro 2962
São Bernardo do Campo
CEP 09600-000 - SP - Brasil

Phone [phone]
Fax [phone]

Canada

Sartorius Canada Inc.
1173 North Service Road West, D4
Oakville, ON L6M 2V9

Phone [phone]
Toll-Free +1.800.668.4234
Fax [phone]

Mexico

Sartorius de México, S.A. de C.V.
Libramiento Norte de Tepotzotlan s/n,
Colonia Barrio Tlacateco,
Municipio de Tepotzotlan,
Estado de México,
C.P. 54605

Phone [phone]
Fax [phone]

[e-mail]

Asia|Pacific

Australia

Sartorius Australia Pty. Ltd.
Unit 5, 7-11 Rodeo Drive
Dandenong South Vic 3175

Phone [phone]
Fax [phone]

China

Sartorius (Shanghai) Trading Co., Ltd.

rd

3

Floor, North Wing, Tower 1
No. 4560 Jinke Road
Zhangjiang Hi-Tech Park
Pudong District
Shanghai 201210, P.R. China

Phone [phone]
Fax [phone]

Hong Kong

Sartorius Hong Kong Ltd.
Unit 1012, Lu Plaza
2 Wing Yip Street
Kwun Tong
Kowloon, Hong Kong

Phone [phone]
Fax [phone]

India

Sartorius Weighing India Pvt. Ltd.
#69/2-69/3, NH 48, Jakkasandra,
Nelamangala Tq
562 123 Bangalore, India

Phone [phone]
Fax [phone]

Japan

Sartorius Japan K.K.

th

4

Fl., Daiwa Shinagawa North Bldg.
8-11, Kita-Shinagawa 1-chome
Shinagawa-ku, Tokyo, 140-0001 Japan

Phone [phone]
Fax [phone]

Malaysia

Sartorius Malaysia Sdn. Bhd
Lot L3-E-3B, Enterprise 4
Technology Park Malaysia
Bukit Jalil
57000 Kuala Lumpur, Malaysia

Phone [phone]
Fax [phone]

Singapore

Sartorius Singapore Pte. Ltd
10 Science Park Road,
The Alpha #02-13/14,
Singapore Science Park II
Singapore 117684

Phone [phone]
Fax [phone]

South Korea

Sartorius Korea Ltd.

th

8

Floor, Solid Space B/D,
PanGyoYeok-Ro 220, BunDang-Gu
SeongNam-Si, GyeongGi-Do, 463-400

Phone [phone]
Fax [phone]

Thailand

Sartorius (Thailand) Co. Ltd.
129 Rama 9 Road,
Huaykwang
Bangkok 10310

Phone [phone]
Fax [phone]

Specifications subject to change without notice. Printed in the EU on paper bleached without chlorine. |

Ver. 1 | 2019 Jan | EN