Sartorius GC803S, CP64, CP124S, GC803P, GC2502 Operating Instructions Manual

...

Download

This document courtesy of:

Data Weighing Systems, Inc.

For immediate assistance call

1-800-750-6842

Operating Instructions

Sartorius Competence | CP Series | Sartorius Gem

plus

CP, GC and GP Models Electronic Semimicro- and Analytical Precision Balances and Precious Metal Scales

98648-009-91

Contents

2 Contents

3 Intended Use

4 Warnings and

Safety Precautions

5 Getting Started

14 Operating the Balance/Scale 14 Overview of Display and

Operating Elements 15 Basic Weighing Function 17 Under-balance/scale Weighing 19 Calibration/Adjustment

23 Configuring the Balance/Scale 23 Printing the Settings 24 Setting the Parameters

(Menu Codes) 25 Parameter Settings (Overview) 30 Setting IDs, Time, Date and

Display Brightness

33 Application Programs 34 Net-Total Formulation 38 Counting 39 Reference Weighing 42 Weighing in Percent 45 Animal Weighing/Averaging 48 Toggle between Weight Units

49 Generating a Printout 52 ISO/GLP-compliant Printout

54 Data Interface 58 Data Input Format 61 Pin Assignment Chart 62 Cabling Diagram

63 Error Codes

65 Care and Maintenance

67 Instructions for Recycling

68 Overview 68 Specifications 79 Accessories (Options) 82 Declaration of Conformity

Intended Use

The models of the CP, GP and GC Series are weighing instruments of special and high accuracy designed for the measurement of mass, covering a range from

0.01 mg to 34 kg.

CP, GP and GC models meet the highest requirements on the accuracy and reliability of weighing results through the following features:

– Efficient filtering-out of unfavorable

ambient conditions, such as vibration, drafts, etc.

– Stable and reproducible weighing results

– Excellent readability under any

lighting conditions

– Rugged, durable weighing system

These weighing instruments save work and speed up simple routine applications through these features:

– Extremely fast response times

– Built-in applications (counting, animal

weighing, weighing in percent, etc.)

– Total ease of operation

– ISO/GLP-compliant recording capability

for printouts

– Serial RS-232 port for optional connection

to a PC

Warnings and Safety Precautions

The balance/scale has been constructed in accordance with the European Directives as well as international regulations and standards for operation of electrical equipment, electromagnetic compatibility, and stipulated safety requirements. Improper use or handling, however, can result in damage and/ or injury.

To prevent damage to the equipment, please read these operating instructions carefully before using your balance/scale. Keep these instructions in a safe place. Follow the instructions below to ensure safe and trouble-free operation of your balance/scale:

!Do not use this balance/scale in a

hazardous area/location.

! If you use electrical equipment in

installations and under ambient conditions requiring higher safety standards, you must comply with the provisions as specified in the applicable regulations for installation in your country.

!Make sure that the voltage rating

printed on the AC adapter is identical to your local line voltage.

!Warning when using pre-wired RS-232

connecting cables: The pin assignments in RS-232 cables purchased from other manufacturers may be incompatible with Sartorius balances/scales. Be sure to check the pin assignment against the chart on page 61 before connecting the cable, and disconnect any lines marked “Internally Connected”.

– The only way to switch the power off

completely is to disconnect the AC adapter.

– Note on Installation:

The operator shall be responsible for any modifications to Sartorius equipment and for any connections of cables or equipment not supplied by Sartorius and must check and, if necessary, correct these modifications and connections. On request, Sartorius will provide information on the minimum operating specifications (in accordance with the Standards listed above for defined immunity to interference). IP ratings:

– CP34001S, CP34001P, CP34000, CP16001S

and CP12001S meet IP44 requirements

– Additional models with readabilities > 10 mg

meet IP53 requirements

– Models with readabilities < 1 mg

meet IP32 requirements

– AC adapters meet IP20 requirements

– Connect only Sartorius accessories and

options, as these are optimally designed for use with your Sartorius balance/scale.

– Protect the AC adapter and the weighing

instrument from contact with liquids.

When cleaning your balance/scale, make sure that no liquid enters the balance/scale housing; use only a slightly moistened cloth to clean the balance/scale.

Do not open the balance/scale housing. If the seal is broken, this will result in forfeiture of all claims under the manufacturer’s warranty. If you have any problems with your balance/scale:

$ contact your local Sartorius office,

dealer or service center

Getting Started

Warranty

Do not miss out on the benefits of our full warranty. Complete the warranty registration card, if available, indicating the date of installation, and return the card to your Sartorius office or dealer.

Storage and Shipping Conditions

Do not expose the balance/scale to extreme temperatures, blows, shocks, vibration or moisture.

Unpacking the Equipment

§ After unpacking the balance/scale, check it

immediately for any visible damage as a result of rough handling during shipment

$ If you see any sign of damage:

proceed as directed in the section on “Safety Inspection" in the chapter entitled “Care and Maintenance."

It is a good idea to save the box and all parts of the packaging until you have successfully installed your balance/scale. Only the original packaging provides the best protection for shipment. Before packing your balance/scale, unplug all connected cables to prevent damage.

– Set up the balance/scale on a stable,

even surface

– Avoid placing the balance/scale in close

proximity to a heater or otherwise exposing the balance/scale to heat or direct sunlight

– Protect the balance/scale from drafts that

come from open windows or doors

– Avoid exposing the balance/scale to extreme

vibrations during weighing

– Protect the balance/scale from aggressive

chemical vapors

– Do not expose the balance/scale to extreme

moisture over long periods

– Level the balance/scale at the place

of installation

Conditioning the Balance/Scale: Moisture in the air can condense on the surfaces of a cold balance/scale whenever it is brought into a substantially warmer place. If you transfer the balance/scale to a warmer area, make sure to condition it for about 2 hours at room temperature, leaving it unplugged from AC power.

Seal on Balances/Scales Verified for Use in Legal Metrology in the EU*:

EU legislation requires that a control seal be affixed to verified balances/scales of accuracy class K. The control seal consists of a sticker with the “Sartorius" logo. This seal will be irreparably damaged if you attempt to remove it. If the seal is broken, the validity of verification will become void and you must have your balance/scale re-verified.

* Including the Signatories of the Agreement

on the European Economic Area

Equipment Supplied

The equipment supplied includes the components listed below:

CP Balances with Readability of ≤ 0.1 mg; GC Scales

–

Balance/scale with display and control unit – Electronics box (model CP225D only) – Draft shield with base plate – AC adapter – Weighing pan – Shield disk – Dust cover – Gem tray (GC scales only)

CP Balances with Readability of 1 mg – Balance with display and control unit – Draft shield with cover – AC adapter – Weighing pan – Pan support – Base plate

CP Balances with Readability of

0.01 g/0.1 g, GP Scales

–

Balance/scale with display and control unit – AC adapter – Weighing pan – Pan support (model CP622 only) – Gem tray (GP scales only)

CP34001S, CP34001P, CP16001S,

CP12001S, CP34000 – Balance with display and control unit – AC adapter – Weighing pan

Installation Instructions

Your balance/scale is designed to provide

reliable weighing results under normal

ambient conditions. When choosing

a location to set up your balance/scale,

observe the following so that you

will be able to work with added speed

and accuracy:

Setting up the Balance/Scale

Balances/Scales with an Analytical Draft Shield Chamber:

!Move the sliding lock on the back of the

draft shield to the right (open position)

§ Position the draft carefully on the

balance/scale

§ Secure the draft shield in position by moving

the sliding lock device on the back of the balance/scale to the left while pressing down gently on the floor of the draft shield

§ Place the components listed below inside the

chamber in the order given:

– Base plate

– Shield disk

– Weighing pan

– Gem tray (GC models only)

Balances/Scales with a 3-sided Draft Shield:

§ Place the draft shield on the balance/scale

with the cover opening in front on the right

§ Turn the draft shield clockwise until it is

firmly in position

§ Place the components listed below inside the

chamber in the order given:

– Base plate

– Pan support

– Weighing pan

$ Accessing the weighing chamber from the

side: Pull out the side panels one at a time

Connecting the Electronics Box to Model CP225D (-0CE)

– Insert the connector on the cable in to the

socket on the electronics box

Balances/Scales with a Rectangular Weighing Pan and a Weighing Capacity of up to 10 kg

§ Place the components listed below on the

balance/scale in the order given:

– Weighing pan

– Gem tray (GP scales only)

Balances/Scales with a Rectangular Weighing Pan and a Weighing Capacity over 10 kg

§ Place the weighing pan on the balance/scale

CP622

§ Place the components listed below on the

balance/scale in the order given:

– Pan support

– Weighing pan

Connecting the Balance/Scale to AC Power/Safety Precautions

$ Use only original Sartorius AC adapters.

The protection rating on the AC adapter is IP20 in accordance with EN60529.

$ See the “Accessories" for information on

using an IP65-protected industrial AC adapter or an external rechargeable battery pack with your balance/scale.

CP225D:

● Insert the right angle plug into the jack on

the electronics box

All Other Balances/Scales with a Weighing Capacity of up to 10 kg:

● Insert the right-angle plug into the jack on

the balance/scale

Connect the power cable to the AC adapter (on balances/scales with weighing capacities of up to 10 kg)

$ Use an original Sartorius AC adapter with

a wide input voltage range (85 ... 265 V~), order number 6971960, and replaceable power cable: 6971953 (Europe) 6971954 (US/CDN) 6971955 (UK) 6971956 (AUS) 6971957 (ZA)

Balances/Scales with a Weighing Capacity of over 10 kg:

● Insert the right-angle plug into the jack

and tighten the screw.

Safety Precautions

The AC adapter rated to Class 2 can be plugged into any wall outlet without any additional safety precautions. The ground or earth terminal is connected to the balance/scale housing, which can be additionally grounded, if required. The data interface is also electrically connected to the balance/scale housing (ground).

Information on Radio Frequency Interference

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference, when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user, at his own expense, will be required to take whatever measures may be required to correct the interference.

Connecting Electronic Peripheral Devices

§ Make absolutely sure to unplug the balance/

scale from AC power before you connect or disconnect a peripheral device (printer or PC) to or from the interface port.

Warmup Time

To deliver exact results, the balance/scale must warm up for at least 30 minutes after initial connection to AC power or after a relatively long power outage. Only after this time will the balance/scale have reached the required operating temperature.

Using Verified Balances/Scales as Legal Measuring Instruments in the EU*

$ The balance/scale must warm up for at

least 24 hours after initial connection to AC power.

Leveling the Balance/Scale

Purpose

– To compensate for unevenness at the place

of installation.

– To achieve perfectly horizontal positioning

of the balance/scale for consistent reproducibility

Always level the balance/scale again after any time it has been moved.

* including the Signatories of the Agreement

on the European Economic Area

Leveling Balances/Scales with a Weighing Capacity of up to 10 kg

Only the 2 front feet are used for leveling.

§ Retract the 2 rear feet (on models with

rectangular weighing pans only).

§ Turn the 2 front feet as shown in the

diagram until the air bubble is centered within the circle of the level indicator.

> In most cases this will require several

adjustment steps

§ For weighing heavy samples:

Extend the 2 rear feet until they touch the surface on which the balance/scale rests (on models with rectangular weighing pans only).

Leveling Balances/Scales with a Weighing Capacity over 10 kg

§ Adjust the leveling feet until the air bubble

is centered within the circle of the level indicator

Antitheft Locking Device on Balances/ Scales with a Weighing Capacity of up to 10 kg

To fasten an antitheft locking device, use the lug located on the rear panel of the balance/scale.

● Secure the balance/scale at the place of

installation, e.g., with a chain or a lock.

Operating the Balance/Scale

Overview of Display and Operating Elements

Designation Description

1 Weight units

2 Tare function:

Press here to tare the weight of any container so that the readout shows the net weight of samples.

3 Symbol indicating that a GLP-

compliant printout is being generated

4 Symbol indicating that a

printout is being generated

5 Symbol indicating data in

memory, when using the net-total formulation program

6 Data output function:

Press this key to send displayed values over the built-in data interface to a DataPrint printer or a PC.

7 Function key:

Starts an application program

8 Symbol indicating the active

program

9 Press here to start calibration/

adjustment

Designation Description

10 Delete (Clear Function)

This key is generally used to interrupt/cancel functions; for example: – to end an application

program

– to interrupt calibration/

adjustment routines

11 On/Off key:

Switches the display on/off. (The balance/scale may remain in standby mode, depending on the settings.)

12 Symbol indicating that the cal-

ibration/adjustment function is active

13 Symbol indicating that the

animal weighing program is active, with automatic-start function

14 Symbol indicating stand-by

mode or zero range

15 Weight readout in the selected

weight unit

15 1

2 2

14 3

4 5 6

13 12 11

7 8

Basic Weighing Function

Purpose

The basic weighing function is always accessible and can be used alone or in combination with an application program (counting, weighing in percent, etc.).

Features

– Taring the balance/scale

You can tare the balance/scale within the entire weighing range.

– Assigning IDs to weights (as needed)

– Printing weights

Using Verified Balances/Scales as Legal Measuring Instruments in the EU*:

The type-approval certificate for verification applies only to non-automatic weighing instruments; for operation with or without auxiliary measuring devices, you must comply with the regulations of your country applicable to the place of installation of your balance/scale.

● Before using the balance/scale as a legal

measuring instrument, calibrate and adjust it at the place of use using the built-in motorized calibration and adjustment weight (span adjustment device): see the “Calibration/ Adjustment" section in this chapter

$ The temperature range (°C) indicated on

the verification label may not be exceeded during operation

Example: BD BL 200 K +10 … +30 °C

* including the Signatories of the Agreement

on the European Economic Area

Preparation

A circle displayed in the upper right-hand corner indicates that the balance/scale has been disconnected from power (the power cable was unplugged or due to power failure).

● Turn on the balance/scale: Press e

> All symbols on the display light up briefly.

> The balance/scale performs a display test.

● To change configurations: see the chapter

entitled “Configuring the Balance/Scale"

● To load factory-set default configurations:

see “Configuring the Balance/Scale" (menu code 9 - -1)

$ To tare the balance/scale: Press t

When the balance/scale is switched on, the b is displayed until you press a key. If the b symbol is displayed during operation, this indicates that the processor is performing a function and cannot receive further commands at the moment.

Additional Functions

● Turning off the balance/scale: Press e

A zero in the lower left-hand corner indicates that the balance/scale has been switched off and is in stand-by mode.

Under-Balance/Scale Weighing

A port for a under-balance/scale weighing hanger is located on the bottom of the balance/scale. You can order the hanger directly from Sartorius for balances/scales with a weighing capacity over 12 kg (see “Accessories").

● Open cover plate on the bottom

of the balance/scale.

● Using the built-in hook (1): Attach the

sample (e.g., using a suspension wire) to the hook

$ Bore hole (2): Carefully fasten the

special hook, or order a hook directly from Sartorius.

$ If necessary, install a shield for protection

against drafts

Important Note Concerning Verified Balances/Scales Approved for Use as Legal Measuring Instruments in the EU*:

The under-balance/scale weighing port may not be opened or used when an approved balance/scale is being operated as a legal measuring instrument.

* including the Signatories of the Agreement

on the European Economic Area

Example

Simple Weighing

Setting in Balance/Scale Operating Menu: Line format for printout:

For other applications/GLP (7 2 2)

Step Key (or instruction) Display/Output

1. Turn on the balance/scale e

+ 0.0 g

Self-test is performed, followed by automatic initial tare function.

2. Place container on balance/scale

+ 11.5 g

(in this example: 11.5 g).

3. Tare the balance/scale. t

+ 0.0 g

4. Place sample in container

+ 132.0 g

on balance/scale (in this example: 132 g).

6. Print weight. p

N + 132.0 g

Calibration/Adjustment

Purpose

Calibration is the determination of the difference between the weight readout and the true weight (mass) of a sample. Calibration does not entail making any changes within the balance/scale.

Adjustment is the correction of any difference between the measured value displayed and the true weight (mass) of the sample, or the reduction of the difference to an allowable level within the maximum permissible error limits.

Using Verified Balances/Scales as Legal Measuring Instruments in the EU*:

Before using your balance/scale as a legal measuring instrument, you must perform “internal calibration" at the place of installation after the warmup period.

Features

Calibration/adjustment can be performed

only when – there is no load on the balance/scale, – the balance/scale is tared, – the internal signal is stable.

If these conditions are not met, an error

message is displayed (Err 02).

Adjustment can be performed – automatically following calibration

(menu code 1 10 1) or – manually, at operator discretion, after

calibration (1 10 2)

* including the Signatories of

the Agreement on the European

Economic Area

The weight displayed for the sample on the balance/scale must not differ from the nominal weight by more than 2%.

You can use any of the following weight units to calibrate/adjust: g, kg, lb (1 11 1 to 3)

You can block calibration/adjustment

of the balance/scale: – Select menu code 1 9 7, and – Close the menu access switch on the back

of the balance/scale

You can have the calibration/adjustment

results documented in a ISO/GLP-compliant

printout (see page 52).

For service technicians only:

External Calibration in Verified Balances/

Scales of Accuracy Class K

– External calibration can be made accessible

only after removing the verification

control seal.

> In this case, the validity of the verification

becomes void and the balance/scale must be

re-verified.

Calibration/Adjustment Sequence

You can configure the operating menu so that:

– adjustment automatically follows calibra-

tion in a single operation (1 10 1), or

– the operator chooses whether to end

the calibration/adjustment routine or have adjustment performed (1 10 2)

If there is no deviation, or if the difference is within the effective requirements for accuracy of measurements, it is not necessary to adjust the balance/ scale. In this case, you can end the calibration routine following calibration. Two keys are active at that point:

– q = start adjustment

– c = end the calibration/

adjustment routine

Factory Settings

Calibration adjustment mode for models without built-in motorized calibration weight: External calibration (1 9 1)

Calibration adjustment mode for models with built-in motorized calibration weight: Internal calibration (1 9 3)

Calibration/adjustment sequence: Adjustment automatically follows calibration in a single operation (1 10 1)

Weight unit for calibration: grams (1 11 1)

ISO/GLP-compliant printout: off (8 10 1)

Internal Calibration (for models with built-in calibration weight only)

The built-in calibration weight is standard equipment on all verified balances/scales and on the following standard (non-verified) models: CP225D, CP324S, CP224S, CP64, GC1603P, GC803S, GC803P

Settings: Calibration/adjustment mode: Internal calibration/adjustment (menu code 1 9 3)

There is a motorized calibration weight within the balance/scale housing which is applied and removed automatically for internal calibration.

Step Key (or instruction) Display

1. Turn on balance/scale, e

0.0 g

if necessary.

2. Tare the balance/scale, t

0.0 g

if necessary.

3. Start calibration/adjustment q

Internal weight is applied CAL automatically.

4. Balance/scale is calibrated

– 0.2 g

(displayed only if menu CAL code 1 10 2 is set).

5. If the menu code for

“calibration and adjustment CAL in a single step" (1 10 1) is set, the balance/scale is adjusted automatically now.

6. Internal weight is unloaded.

0.0 g

External Calibration

Settings: Calibration/adjustment mode: External calibration/adjustment (menu code 1 9 1)

The weight required for calibration/adjustment is defined in the factory settings (see “Specifications").

Step Key (or instruction) Display

1. Turn on the balance/scale, e

0.0 g

if necessary.

2. Tare the balance/scale, t

0.0 g

if necessary.

3. Start calibration/adjustment q

+ 5000.0

Calibration weight is displayed CAL without a unit symbol.

4. Apply the prompted calibration

5000.0

weight (in this example: CAL 5000 g).

After calibration, the weight

+ 5000.0 g

unit is shown. CAL

5. Remove the calibration weight.

0.0 g

Configuring the Balance/Scale

Purpose

You can configure your balance/scale to meet individual requirements by selecting from parameter settings in a software menu.

Key functions during configuration:

Activate the settings menu: Press e to turn the balance/scale off and back on again. While all display segments are lit, press t briefly

Scroll upward ↑: press q Scroll right →: press p Confirm input: press t Store settings and exit menu: Press and hold t (2 sec.)

● Print Current Settings

– At the 3rd menu level (lowest level):

Press and hold p

> Printout: (Example)

Menu711

– At the 2nd menu level: Press and hold p

> Printout (Example)

Menu711 Menu721 Menu731

– At the 1st menu level: Press and hold p

> All current settings are printed.

Setting the Parameters (Menu Codes)

Example: Adapting the balance/scale to "very unstable" ambient conditions (menu code 1 1 4).

Step Key (or instruction) Display

1. Turn off the balance/scale. e

2. Turn on the balance/scale and e

while all segments are displayed: t briefly

$ Scroll upward within a q 2

menu level; after the last repeatedly ... menu code, the first

code is displayed again. 1

3. Select the second level p 1 1

(scroll to the right).

4. Select the third level p

1 1 2

(scroll to the right).

5. 3

menu level: q

Scroll until the desired repeatedly

1 1 4

number is shown.

6. Confirm change; “o" t

1 1 4

on display indicates active setting

$ Return to higher menu level p

(from the 3rdlevel).

$ Set other codes as desired. p, q

7. Store settings and exit Press and

the menu hold t (2 sec.)

$ Exit menu without storing

changes. e

> Restart application.

0.0 g

Parameter Settings (Overview)

o Factory settings √ User-defined setting

Menu 1 Weighing 1 1 Adapt filter 111 Very stable conditions

(ambient conditions) 112 o Stable conditions

113 Unstable conditions 114 Very unstable conditions

1 2 Application filter 121 o Final readout

122 Filling mode

1 3 Stability range 131 1/4 digit

The stability symbol is 132 1/2 digit displayed when the 133 1 digit value is stable within 134 o 2 digits this number of digits. 135 4 digits

136 8 digits*

1 5 Tare function* 151 Without stability

152 o After stability

1 6 Auto zero 161oOn

162 Off

1 7 Weight unit 1 171 Grams (Display: o)*

172 o Grams (Display: g) 173 Kilograms

)

174 Carats 175 Pounds* 176 Ounces* 177 Troy ounces* 178 Hong Kong taels* 179 Singapore taels* 1710 Taiwanese taels* 1711 Grains* 1712 Pennyweights* 1713 Milligrams

)

1714 Parts per pound* 1715 Chinese taels* 1716 Mommes* 1717 Austrian carats* 1718 Tola* 1719 Baht* 1720 Mesghal*

1 8 see next page

2 through 9 see next pages

* = Setting cannot be changed on verified balances/scales

) = Not available in the CP64-0CE

) = Not available in verified balances/scales of accuracy class K

enu level 1

enu level 2

enu level 3

Factory setting

enu item

Menu 1 Weighing 1 1 through 1 7 see previous page

1 8 Display accuracy 1* 181 o All digits

185 Reduced by 1 digit*

1 9 q key function 191 o External cal./adj.

)

193 Internal cal./adj.

)

197 q key blocked

1 10 Calibration/ 1101 o Calibrate, then auto adjust

adjustment sequence in one operation

1102 Calibrate, then manual

adjust

1 11 Weight unit for 1111 o Grams

calibration weight* 1112 Kilograms

1113 Pounds

2 Application 2 1 Program selection 211 o Weighing

programs 212 Toggle weight units

214 Counting 215 Weighing in percent

)

216 Net-total (tare memory) 217 Animal weighing/

Averaging

)

3 through 9 see following pages

* = Setting cannot be changed on verified balances/scales

) = Not available in balances/scales of accuracy class K

) = On models with built-in motorized calibration weight only

) = Not available in CP…-ACE models

enu level 1

enu level 2

enu level 3

Factory setting

enu item

Menu 1 and 2 see previous pages

3 Application 3 1 Weight unit 2 311 Grams (Display: o)

parameters 312 o Grams (Display: g)

313 Kilograms

)

314 Carats 315 Pounds* 316 Ounces* 317 Troy ounces* 318 Hong Kong taels* 319 Singapore taels* 3110 Taiwanese taels* 3111 Grains* 3112 Pennyweights* 3113 Milligrams

)

3114 Parts per pound* 3115 Chinese taels* 3116 Mommes* 3117 Austrian carats* 3118 Tola* 3119 Baht* 3120 Mesghal*

3 2 Display accuracy 2 321 o All digits

325 Reduced by 1 digit

3 5 Storage parameter 351 With stability

Counting and (internal resolution) Weighing in Percent 352 o With higher stability

3 6 Decimal places for 361 None

calculations 362 o 1 decimal place

363 2 decimal places 364 3 decimal places

3 7 Animal activity 371 Calm

372 o Normal 373 Active

3 8 Start Animal weighing 381 Manual start

382 o Automatic start

4 Application 4 1 Autom. reference- 411 o Off

parameters – sample updating 412 On Counting

5 through 9 see next page

* = Setting cannot be changed on verified balances/scales

) = Not available in the CP64-0CE

) = Not available in verified balances/scales of accuracy class K

enu level 1

enu level 2

enu level 3

Factory setting

enu item

Menu 1 through 3 see previous page

5 Data interface 5 1 Baud rate 511 150 baud

512 300 baud 513 600 baud 514 o 1,200 baud 515 2,400 baud 516 4,800 baud 517 9,600 baud 518 19,200 baud

5 2 Parity 521 Mark

522 Space 523 o Odd 524 Even

5 3 No. of stop bits 531 o 1 stop bit

532 2 stop bits

5 4 Handshake mode 541 Software

542 o Hardware,

2 char. after CTS

543 Hardware,

1 char. after CTS

6 Print for 6 1 Manual/auto print 611 Manual without stability

weighing mode with p key

612 o Manual at stability

with p key

613 Manual at stability

with p key

614 Automatic without stability 615 Automatic at stability 616 Automatic when

load changed

)

6 2 Stop automatic 621 Manual (p key)

printing 622 o Not stoppable

6 3 Time-dependent 631 o 1 display cycle

autom. printing 632 2 display cycles

6 4 Tare the balance/scale 641 o Off

after ind. printout 642 On

7 through 9 see next page

) = Auto print when load change is > 10 d and stability is reached: no printout until residual difference

in load value is < 5 d; not available in CP…-ACE models

enu level 1

enu level 2

enu level 3

Factory setting

enu item

enu level 1

enu level 2

enu level 3

Factory setting

enu item

Menu 1 through 6 see previous pages

7 Printing with 7 1 Print 711 Off

application application- 712 o On; all parameters programs parameter 713 On; main parameters ony

7 2 Line format 721 For raw data

of printout (16 characters)

722 o For other apps

(22 characters)

7 3 Printout with 731 o Autom. printout

Net total of last net value program 732 Autom. printout

of tare value

8 Extra 8 1 Menu * 811 o Parameter settings

functions alterable

812 Parameter settings

read only

8 2 Acoustic signal 821oOn

822 Off

8 4 External switch 841op key

function 842 t key

843 q key 844 v key 845 c key

8 5 Power-on mode 851 o Off/on/standby

for balance/scale 853 Off/on

854 Automatic on

8 8 Reference balance/ 881 o Off

scale 882 On for QC scale

883 On for FB/FC/LA/LP

balance/scale

884 On for isi-terminal

8 10 ISO/GLP-compliant 8101 o No ISO/GLP printout

printout 8102 For calibration/adjustment

only

8103 Always on

9 Reset menu 9 – Factory settings 9 – 1 Restore

9 – 2 o Do not restore

* = Setting cannot be changed on verified balances/scales

Setting IDs, Time, Date and Display Brightness

Purpose

Configuring measurement environment parameters for ISO/GLP-compliant data records. Setting date and time (for ISO/GLPcompliant records only). Adapting display to ambient lighting conditions.

Features

– Enter up to 8 characters to identify a

measurement series. Permissible characters include the numbers 0 through 9, the dash or minus sign (“–") and spaces. Leading zeroes are output as spaces.

– Date and time of beginning and end

of series recorded.

– Display brightness

0 = off, levels of brightness: 1 through 9

Activate the ID number, date and time configuration menu:

Press e to turn the balance/scale off and back on again. While all display segments are lit, press t briefly

Scroll upward ↑: press q Scroll right →: press p

Press t to confirm input and toggle between ID number, time and date. Store settings and exit menu: Press and hold t (2 sec.)

) No display backlighting on models CP225D

and CP225D-0CE

Example: Setting the time, date and display brightness

Step Key (or instruction) Display

1. Turn off the balance/scale. e

2. Turn on the balance/scale and e

while all segments are displayed: v briefly

--------

$ Move cursor in 8-character ID. p --------

repeatedly

$ Set or change ID. q

-3------

repeatedly

3. Confirm ID and activate time. t

H10.14.11

4. Select 24-hour clock (“H”) or

12-hour clock, (“P”). q

H10.14.19

5. Toggle between hours, p H10.15.19

minutes and seconds.

6. Synchronize seconds with

reference clock. q

H10.15.00

7. Confirm time and activate date. t 29.jan.01

8. Set date q repeatedly, “Day”, p

01.jan.01

“Month”, and q repeatedly,

22.apr.01

if desired, set “Year”. q repeatedly Confirm date and activate display brightness. t

22.apr.01

Step Key (or instruction) Display

9. Set display brightness. q

repeatedly

lamp 7

10. Store settings and exit Press and

the menu hold t (2 sec.)

$ Exit menu without

storing changes. e

> Restart application.

0.0 g

Application Programs

Function Keys

v: Start application program/

Store component.

v Toggle between component press and weight and total weight hold for (net-total formulation); ≥2 seconds: change reference quantity

(counting), reference percentage (weighing in percent) or number of measurements (animal weighing)

c: End application program; delete

Using Verified Balances/Scales as Legal Measuring Instruments in the EU*: All application programs can be selected on balances/scales used as legal measuring instruments. Calculated values can be indicated as follows:

– Percent = % – Piece count (counting) = pcs – Computed value = o, G

* including the Signatories of the Agreement

on the European Economic Area

Net-Total Formulation

Menu code: 2 1 6*

Display symbol: R

Purpose

With this application program you can weigh in different components up to a defined total. You can also print out the total weight and the individual weights of the components.

Features

– Tare function

– Weigh up to 99 components from “0" to a

defined total component weight

– Store component weights (“Store xx comp."),

with – display zeroed automatically after value

is stored, and

– automatic printout (print application

parameters); either – of the last component weight (net value)

– of the total weight (tare value)

– Clear component memory when weighing

series is canceled by pressing c; total weight printed if “Print all parameters" is selected in the operating menu; otherwise, the normal net weight printout is generated (p key).

– Toggling between component weight and

total weight by pressing and holding v.

– Printout of the total of the individual

component weights (T COMP)

* = Factory setting on CP…-ACE models only

Preparation

Set parameters for Net-Total Formulation:

$ Select the application program in the

operating menu

§ Set parameters for automatic printout when

component stored

2 Application programs

2 1 Program selection

2 1 6* Net-total

7 Print for Application

7 1 Print application parameters

7 1 1 Off 7 1 2 ο On; all parameters 7 1 3 On; only main parameters

7 3 Printout of net-total formulation data

7 3 1 ο Autom. print of last net value 7 3 2 Autom. print of tare value

ο = Factory setting * = Factory setting on CP…-ACE models only

Printout of Net-total Formulation Data

Comp2 + 278.1 g : Second component T COMP+ 2117.5 g : Sum of components T1 + 1821.5 g : Tare weight (2nd tare memory) N1 + 278.1 g : Net weight = Gross – Tare –

2nd Tare memory

N + 2099.6 g: Net weight = Gross – Tare

Example: Weighing-in several components

Settings: Application program: Net-total formulation 2 1 6; Print application parameters: On, print all 7 1 2; Line format for printout: 22 characters 7 2 2; Automatic printout of last net value 7 3 1

Step Key (or instruction) Display/Output

1. Turn on the balance/scale, e

if necessary

2. Place empty container

+ 65.0 g

on the balance/scale.

3. Tare the balance/scale. t

0.0 g

4. Add first component.

+ 120,5 g

5. Store component data. v

0.0 g

NET

COMP1 + 120.5 g

6. Add next component. + 70,5 g

7. Store component data. v

0.0 g

NET

COMP2 + 70.5 g

8. Weigh in further components Repeat steps if desired. 5 and 6.

9. Fill to target if desired. Press and

+ 191,0 g

hold v (2 sec.) G

Step Key (or instruction) Display/Output

10. Add last component.

+ 12,5 g

11. Store component data. v

0.0 g

NET

COMP 3+ 12.5 g

12. Display total weight. c + 203,5 g

T COMP+ 203.5 g

Counting

Menu code: 2 1 4

Display symbol: Z

Purpose

With the Counting program you can determine the number of parts that each have approximately equal weight.

Features

– The minimum load is equal to one digit,

defined according to the resolution of the active weight unit.

– Press and hold the v key (2 seconds)

to set the reference sample quantity.

– Configure the resolution used when

reference sample quantity is stored and piece counts are calculated.

– Optional automatic output of the piece

count and average piece weight to the data interface port when the menu code 7 1 2 (print application parameters) is set.

– Long-term storage of the last reference

sample quantity “nRef" entered.

– Toggling between piece count and

weight by pressing v.

Function Keys

v: Begin determination of piece weight

> Application program initialized with

predefined reference sample quantity.

c: End application program; clear initialization data

Changing the reference sample quantity:

§ Press and hold v (2 sec.) > Current reference sample quantity

is displayed.

$ Press v briefly to change the value;

press repeatedly until the desired reference sample quantity is displayed. Quantities to choose from: 1, 2, 5, 10, 20, 50, 100.

§ Store setting in long-term memory:

Press and hold v.

Reference Sample Updating

Automatic reference sample updating optimizes the counting accuracy. You can activate or de-activate this function in the menu.

Automatic reference sample updating is performed when:

– the criterion for the stability parameter

selected in the menu has been met

– the current piece count is less than twice

the original piece count

– the current piece count is less than

100 + the initialization value

– the internally calculated piece count

(such as 17.24 pcs) differs by less than ± 0.3 pcs from the whole number (17 pcs in this example)

> The abbreviation opt, for “optimizing",

is displayed briefly with the new reference sample quantity.

Reference Weighing

(Counting with two balances/scales)

Purpose: Use of a reference balance/scale affords higher precision in counting large amounts of parts. The CP balance is used to determine the reference weight. The following Sartorius terminals can be used for sample weighing in conjunction with a reference

balance/scale: – For QC scales menu code 8 8 2 – For FB/FC/LA/LP series balances/scales,

menu code 8 8 3 – For isi terminals menu code 8 8 4

§ Please order the required connecting cables

directly from Sartorius

The following settings must have the same

configurations in both balances/scales: – “Counting” program – Weight units – Settings in the CP balance:

Set menu codes 7 1 2 and 7 2 2 – All data interface parameters

– Baud rate

– Parity

– Number of stop bits

– Handshake mode

Transfer Function in the CP Balance: – Press the v key > The reference value is transferred to the

reference balance/scale

Reference Balance/Scale: $ See the operating instructions of the

balance/scale in question for details

Preparation

Set parameters for the “Counting” program:

$ Select the application program in the

operating menu

§ Set the following parameters:

2 Application programs

2 1 Program selection

2 1 4 Counting

3 Application parameters

3 5 Storage parameter

3 5 1 With stability

(internal resolution)

3 5 2 ο With higher stability

4 Application parameters for Counting

4 1 Autom. ref. sample updating

4 1 1 ο Off 4 1 2 On

8 Extra functions

8 8 Reference balance/scale

8 8 1 ο Off 8 8 2 On for QC scales 8 8 3 On for FB-/FC-/LA-/

LP models

8 8 4 On for isi terminals

ο = Factory setting

Printout: Counting

nRef + 10 : Reference sample quantity wRef + 21.14 g : Reference weight Qnt + 500 pcs : Calculated quantity

Example: Counting pieces of equal weight

Settings: Menu: Counting program (menu code 2 1 4),

Print application parameters: On; all parameters (menu code 7 1 2), Line format for printout: 22 characters (menu code 7 2 2)

Step Key (or instruction) Display/Output

1. Turn on the balance/scale, e

if necessary.

2. Place empty container

+ 22.6 g

on the balance/scale.

3. Tare the balance/scale. t

0.0 g

4. Add reference sample quantity to container (in this example: 10 pcs).

5. Initialize the balance/scale. v

ref 10 (briefly)

+ 2.14 g + 10 pcs

nRef + 10 pcs wRef + 2.14 g

6. Add desired number + 500 pcs of pieces.

7. Print piece count, if desired. p

Qnt + 500 pcs

8. Display weight. v + 1070.0 g

9. Display piece count. v

+ 500 pcs

10. Unload the balance/scale.

– 511 pcs

11. Repeat as necessary, starting from Step 6.

12. Delete reference c

0.0 g

sample quantity.

Weighing in Percent

Menu code: 2 1 5

Display symbol: %

Purpose

This application program allows you to obtain weight readouts in percent which are in proportion to a reference weight.

Features

– The minimum load is equal to one digit,

defined according to the resolution of the active weight unit.

– Press and hold the v key (2 seconds)

to set the reference percentage

– Storage parameter (rounding-off factor)

for storing the reference weight to calculate the percentage can be configured.

– Configuration of decimal places displayed

with a percentage.

– Optional automatic output of the

reference weight “Wxx%” and reference percentage to the data interface port when the menu code 7 1 2 (print application parameters) is set.

– Long-term storage of the last reference

percentage “pRef” entered.

– Toggling between percentage and weight

by pressing v.

Function Keys

v: Begin calculation of percentage

> Current weight value stored as reference

weight “Wxx%” to be loaded at initialization.

c: End application program; clear initialization data

Changing the reference percentage:

§ Press and hold v (2 sec.) > Current reference percentage is displayed. $ Press v briefly to change the value;

press repeatedly until the desired reference percentage is displayed. Quantities to choose from: 1, 2, 5, 10, 20, 50, 100.

§ Store setting in long-term memory:

Press and hold v.

Preparation

Set parameters for the “Weighing in Percent” program:

$ Select the application program in the

operating menu

§ Set the following parameters:

2 Application programs

2 1 Program selection

2 1 5 Weighing in percent

3 Application parameters

3 5 Storage parameter

3 5 1 ο With stability

(internal resolution)

3 5 2 With higher stability

3 6 Decimal places

3 6 1 none 3 6 2 ο 1 decimal place 3 6 3 2 decimal places 3 6 4 3 decimal places

ο = Factory setting

Printout: Weighing in Percent

pRef + 100 %: Reference percentage Wxx% + 111.6 g : Reference weight net xx% Prc + 94.7 % : Calculated reference percentage

Example: Determining residual weight in percent

Settings: Menu: Weighing in percent program (menu code 2 1 5),

Print application parameters: On; all parameters (menu code 7 1 2), Line format for printout: 22 characters (menu code 7 2 2) Reference percentage: ref 100%

Step Key (or instruction) Display/Output

1. Turn on the balance/scale, e

if necessary.

2. Place empty container

+ 22.6 g

on balance/scale.

3. Tare the balance/scale. t

0.0 g

4. Place sample equal to 100% of reference percentage on the balance/scale (in this example: 111.6 g).

5. Initialize the balance/scale. v

ref 100 (displayed briefly)

+ 111.6 g + 100.0 %

pRef + 100 % Wxx% + 111.6 g

6. Remove container; for example, to treat sample (in this example, the sample is now dried).

7. Place container with sample

+ 94.9 %

on the balance/scale again (after treatment).

8. Optional: print percentage. p

Prc + 94.9 %

9. Display residual weight and c + 105.9 g delete reference value.

10. Optional: print net p

N + 105.9 g

residual weight.

Animal Weighing/Averaging

Menu code: 2 1 7

Display symbol: V

Purpose

Use this program to determine the weights of unstable samples (e.g., live animals) or to determine weights under unstable ambient conditions. With this program, the balance/scale calculates the weight as the average of a defined number of individual weighing operations (also referred to as “subweighing operations”).

Features

– Animal weighing started manually

or automatically

– Minimum load threshold for starting

animal weighing: – for automatic start:

100 display intervals

– for manual start:

50 display intervals

– Automatic start:

Begin the averaging operation by pressing v. “AUTO” is displayed during weighing to indicate that the following values will be averaged automatically. Animal activity: Averaging begins automatically once two subweights are measured within a predefined tolerance range (calm = 2%, normal = 5%, active = 20%).

– Number of weighing operations for

calculation of an average mDef can be set before the beginning of each series.

– Number of remaining weighing

operations in the current series is shown during weighing.

– Arithmetic average displayed as a result in

the pre-set weight unit (identified by the G). The V symbol flashes during this time.

– Toggling between weighed and calculated

results by pressing v (after initialization)

– Unload threshold is one-half of the

minimum load.

– Balance/scale returns to the basic weighing

mode when unloaded; i.e., when the load is below the unload threshold

Function Keys

v: Activate animal weighing program

c: End application program; delete result; interrupt measuring operation.

Changing the number of subweighing operations:

§ Press and hold v (2 sec.) > Current number of subweighing operations

is displayed.

$ Press v briefly to change the value;

press repeatedly until the desired number is displayed. Quantities to choose from: 5, 10, 20, 50, 100.

§ Store setting in long-term memory:

Press and hold v.

Preparation

Set parameters for the “Animal Weighing” program:

$ Select the application program in the

operating menu

§ Set the following parameters:

2 Application programs

2 1 Program selection

2 1 7 Animal weighing

3 Application parameters

3 7 Animal activity

3 7 1 Calm (2% of the

animal/object)

3 7 2 ο Normal (5% of the

animal/object)

3 7 3 Calm (20% of the

animal/object)

3 8 Start

3 8 1 Manual 3 8 2 ο Automatic

ο = Factory setting

Printout: Animal Weighing

mDef 20 : Number of subweighing operations x-Net + 401.1 g : Calculated average

Example: Determining animal weight with automatic start of 20 subweighing operations

Settings: Menu: Animal weighing program (menu code 2 1 7),

Print application parameters: On; all parameters (menu code 7 1 2), Line format for printout: 22 characters (menu code 7 2 2)

Step Key (or instruction) Display/Output

1. Turn on the balance/scale, e

if necessary.

2. Place animal weighing bowl

+ 22.6 g

on the balance.

3. Tare the balance/scale. t

0.0 g

4. Place 1st animal in bowl. Weight value fluctuates due to animal activity.

Start automatic animal weighing.

v 888

The balance/scale delays 20 starting the subweighing 19 operation until successive 18 subweights lie within ... the range defined.

6. After 20 subweighing operations + 410.1 g G

the arithmetic average “x-Net” mDef 20 is displayed. x-Net + 410.1 g

7. Unload the balance/scale. 0.0 g

8. Weigh next animal (if applicable)

Next weighing series begins automatically

Toggle between Weight Units

Menu code: 2 1 2

Display symbol: R1

Purpose

With this application program you can switch the display of a weight value back and forth between two weight units.

Configure the “Toggle Weight Units” application in the operating menu: See “Configuring the Balance/Scale,” menu code 2 1 2: Toggle weight units (factory setting in GC and GP scales)

Menu code Unit Conversion Display Printout Weight unit 1 Weight unit 2

1 7 1 3 1 1 ο Grams * 1) 1.00000000000 o o 1 7 2 ο 3 1 2 ο Grams 2) 1.00000000000 g g

1 7 3 3 1 3 Kilograms 3) 0.00100000000 kg kg 1 7 4 ο 3 1 4 Carats 5.00000000000 ct ct

1 7 5 3 1 5 Pounds* 0.00220462260 lb lb

1 7 6 3 1 6 Ounces* 0.03527396200 oz oz

1 7 7 3 1 7 Troy ounces* 0.03215074700 ozt ozt

1 7 8 3 1 8 Hong Kong taels* 0.02671725000 tl tlh

1 7 9 3 1 9 Singapore taels* 0.02645544638 tl tls

1 7 10 3 1 10 Taiwanese taels* 0.02666666000 tl tlt

1 7 11 3 1 11 Grain* 15.4323583500 GN GN

1 7 12 3 1 12 Pennyweights* 0.64301493100 dwt dwt 1 7 13 3 1 13 ο Milligrams 4) 1000.00000000 mg mg

1 7 14 3 1 14 Parts per pounds* 1.12876677120 o /lb

1 7 15 3 1 15 Chinese taels* 0.02645547175 tl tlc

1 7 16 3 1 16 Mommes* 0.26670000000 m mom

1 7 17 3 1 17 Austrian carats* 5.00000000000 K K

1 7 18 3 1 18 Tola* 0.08573333810 t tol

1 7 19 3 1 19 Baht* 0.06578947437 b bat

1 7 20 3 1 20 Mesghal* 0.21700000000 m MS

o = Factory setting, depends on model * = Not available in verified balances/scales

) = GP3202: readability with Taiwanese taels reduced by one decimal place

) = GC1603P, GC 803P/S: readability 0.0002 g; GC2502: readability 0.001 g

) = Not available in the CP64-0CE

) = Not available in verified balances/scales of accuracy class K

Function

● Press v to toggle between weight unit 1 and weight unit 2.

Generating a Printout

Purpose

You can generate a printout of weights as well as other measured values and identification codes for documentation purposes. You can format the printout to meet individual requirements.

Features

Printouts generated automatically or manually (at the press of a key): weight or calculated value is output.

Line format: Each value printed with up to 6 preceding characters for identification

Print application parameters: Printout of initialization values before printing measurement results.

ISO/GLP-compliant printout: Printout of ambient characteristics.

Printouts generated automatically or by pressing p, dependent on or independent of stability

You can have the following values output automatically when using the application programs if menu code 7 1 2 is configured (printout with data ID codes):

– Net-total: Component or total weight

– Counting:

Reference sample quantity (nRef) Reference weight for one piece (average piece weight; wRef)

– Weighing in percent:

Reference percentage (pRef) Reference weight (Wxx%)

– Animal weighing/averaging:

Number of subweighing operations (mDef) Calculated average (x-Net)

Factory Settings

Print manual/automatic: Individual printout dependent on stability: Manual at stability (menu code 6 1 2)

Line format: Up to 6 characters at the beginning of each line to identify the weight or calculated value: Print net, tare, or gross value, reference sample quantity, or average piece weight with ID (menu code 7 2 2).

Print application parameters: Printout of one or more initialization values for the active application program: On (menu code 7 1 2)

ISO/GLP-compliant printout: No ISO/GLP-compliant printout (menu code 8 10 1)

Auto print: Automatic printout of weight values: No default setting; see print manual/ automatic (menu code 6 1 2) Automatic printout after each display cycle (menu code 6 3 1), cannot be interrupted by pressing p (menu code 6 2 2)

§ Set the following parameters:

See “Configuring the Balance/Scale”

Printout without Data ID Codes:

The value currently

+ 1530.0 g Weight in grams

displayed is printed (weight

+ 58.562 ozt Weight in Troy ounces

or calculated value with unit)

+ 253 pcs Piece count + 88.2 % Percentage

Printout with Data ID Codes:

The current value displayed

ID 12345678 Identification*

can be printed with a data

N + 153.0 g Current net weight

ID code of up to 6 characters

T1 + 23.4 g Value in 2nd tare memory

at the beginning of the line.

Qnt + 253 pcs Piece count Prc + 88.23 % Percentage

* = on ISO/GLP records only

Print Application Parameters:

You can generate a print-

Comp7 + 278.1 g Net-total: 7

compoout of one or more of the nent weight values configured for

T COMP+ 21.14 g Net-total: Total

initialization of an appli-

nRef + 10 Counting: Reference

cation as soon as you sample quantity initialize the balance/scale.

wRef + 21.14 g Counting: Reference weight Wxx% + 1200.0 g Weighing in percent:

Reference weight

Auto Print:

You can have the weight

N + 153.0 g Net weight

readout printed automatically.

Stat Display blank Stat L Display underload Stat H Display overload

ISO/GLP-compliant Printout/Record

Features

You can have the parameters pertaining to the ambient weighing conditions printed before (GLP header) and after (GLP footer) the values of a weighing series. These parameters include:

GLP header: – Date – Time at beginning of measurement – Balance/scale manufacturer – Balance/scale model – Balance/scale serial number – Software version number – Identification number of the current

sampling operation

GLP footer: – Date – Time at end of measurement – Field for operator signature

The record is output to a Sartorius

data printer or a computer.

Settings

● Set the following menu codes

(see “Configuring the Balance/Scale”):

– ISO/GLP-compliant record

after calibration/adjustment only: menu code 8 10 2; or ISO/GLP-compliant record always on: menu code 8 10 3

– Line format for printout: With data ID codes

– 22 characters: menu code 7 2 2

!No ISO/GLP-compliant record is output if

any of the following settings are configured: menu codes 6 1 4, 6 1 5, 6 1 6 (automatic printout) and 7 2 1

Function Keys

Press p to output header and first measured value.

> Header is output the first time p

is pressed

To output header and reference data automatically with an application program active: Press v

End an application:

1) Output GLP footer: Press c

2) End application program: Press c

The ISO/GLP-compliant record can contain the following lines:

-------------------- Dotted line 17-Jan-2001 10:15 Date/time (beginning of measurement)

SARTORIUS AG Balance/scale manufacturer Mod. CP8201 Balance/scale model Ser. no. 10105355 Balance/scale serial number Ver. no. 00-13-01 Software version ID 2690 923 ID

-------------------- Dotted line LID Measurement series no. nRef + 10 pcs Counting: Reference sample quantity wRef + 21.14 g Counting: Reference weight Qnt + 235 pcs Counting result Qnt + 567 pcs Counting result

-------------------- Dotted line 17-Jan-2001 10:20 Date/time (end of measurement) Name: Field for operator signature

Blank line

-------------------- Dotted line

ISO/GLP-compliant printout for external calibration/adjustment:

-------------------- Dotted line 17-Jan-2001 10:30 Date/time (beginning of measurement)

SARTORIUS AG Balance/scale manufacturer Mod. CP8201 Balance/scale model Ser. no. 10105355 Balance/scale serial number Ver. no. 00-13-01 Software version ID 2690 923 ID

-------------------- Dotted line Cal. Ext. Calibration/adjustment mode Set + 5000.0 g Calibration weight Diff. + 0.2 g Difference after calibration Cal. Ext. Complete Confirmation of completed calibration Diff. + 0.0 g Difference from nominal value after calibration

-------------------- Dotted line 17-Jan-2001 10:32 Date/time (end of measurement) Name: Field for operator signature

Blank line

-------------------- Dotted line

Data Interface

Purpose

Your balance/scale is comes equipped with an interface port for connection to a computer or other peripheral device. You can use an on-line computer to change, start and/or monitor the functions of the balance/scale and the application programs.

Features

Type of interface: Serial interface Operating mode: Full duplex Standard: RS-232 Transmission rates: 150; 300; 600; 1,200; 2,400; 4,800; 9,600; 19,200 baud Parity: Mark, space, odd, even Character format: 1 start bit, 7-bit ASCII, parity, 1 or 2 stop bits Handshake: 2-wire interface: via software (XON/XOFF); 4-wire interface: via hardware handshake lines (CTS/DTR) Operating mode: SBI Data output format of the balance/scale: 16 or 22 characters

Factory settings:

Transmission rate: 1,200 baud (5 1 4) Parity: Odd (5 2 3) Stop bits: 1 stop bit (5 3 1) Handshake: Hardware, 2 characters after CTS (5 4 2) Operating mode: Standard SBI (5 5 1) Print manually/automatically: Manual at stability (6 1 2)

Preparation

§ see “Pin Assignments” and

“Pin Assignment Chart”

Output Format with 16 Characters

Display segments that are not activated are output as spaces.

The following characters can be output, depending on the characters displayed on the balance/scale:

Normal Operation

Position 1 2 3 4 5 678910111213141516

+ DDDDDD* UUUCRLF

or – ........ ***

or * ********

*: Space CR: Carriage return D: Digit or letter LF: Line feed U: Unit symbol

Special Codes

Position 1 2 3 4 5 678910111213141516

**********CRLF or H * or L * or C *

*: Space H: Overload C: Calibration/adjustment L: Underload

Error Codes

Position 1 2 3 4 5 678910111213141516

Err*###****CRLF

*: Space # # #: Error code number

Data output example: + 1255.7 g

Position 1 2 345678910111213141516

+***1255.7*g**CRLF

Position 1: Plus or minus sign or space Position 2: Space Positions 3–10: Weight with a decimal point; leading zeros = space Position 11: Space Positions 12–14: Unit symbol or space Position 15: Carriage return Position 16: Line feed

Data Output with an ID Code (22 Characters)

When data is output with an ID code, the ID code (consisting of 6 characters) precedes the data with the 16-character format. These 6 characters identify the following value.

12345678910111213141516171819202122

IIIIII+*DDDDDDDD * UUUCRLF

*****– ........ ***

* ********

I: ID code character U: Unit symbol

) *: Space CR: Carriage return D: Digit or letter LF: Line feed

) depends on balance/scale type; e.g., not all units and characters are available on balances

verified for use in legal metrology

Special Codes

12345678910111213141516171819202122 Stat****************CRLF

*: Space H: Overload

L: Underload

Error Codes

12345678910111213141516171819202122 Stat*****Err*###****CRLF

*: Space # # #: Error number

ID code

characters I Meaning

Stat Status

T1 Tare T1

N Net N

N1 Net N1

COMPxx Net-total: Component no.

T COMP Net-total: Total weighed in

Qnt Counting: Quantity wRef Counting: Reference weight nRef Counting: Reference sample quantity

Prc Weighing in percent: Reference percentage Wxx% Weighing in percent: Reference weight pRef Weighing in percent: Reference percentage mDef Animal weighing: No. of measurements remaining

x-Net Animal weighing: Calculated average

Data Input Format

You can connect a computer to your balance/scale to send commands via the balance/scale interface port to control balance/scale functions and applications. The commands sent are control commands and may have different formats. Control commands consist of up to 4 characters. Each character must be transmitted according to the settings configured in the operating menu for data transmission.

Format for Control Commands Format 1: Esc ! CR LF Format 2: Esc ! # _ CR LF

Esc: Escape CR: Carriage return (optional) !: Command character LF: Line feed (optional)

Command character Format 1:

! Meaning

K Weighing mode 1 (very stable conditions)

L Weighing mode 2 (stable conditions)

M Weighing mode 3 (unstable conditions)

N Weighing mode 4 (very unstable conditions) O Block keys

P p key (print, auto print; activate or block)

R Release keys

S Restart/Self-test

T t key

Z Internal calibration/adjustment*

Command character Format 2:

!# Meaning f0 Function key v f1 Function key q s3 c key

x0 Perform internal calibration* x1 Print balance/scale model x2 Print weighing cell serial number

* = for models with built-in motorized calibration weight only

Synchronization

During data communication between the balance/scale and an on-line device (computer), messages consisting of ASCII characters are transmitted via the interface. For error-free data communication, the parameters for baud rate, parity, handshake mode and character format must be the same for both units.

You can set these parameters in the Setup menu so that they match those of the on-line device. You can also define parameters in the balance/scale to make data output dependent on various conditions. The conditions that can be configured are described under each of the application program descriptions.

If you do not plug a peripheral device into the balance/scale interface port, this will not generate an error message.

Handshake

The balance/scale interface (Sartorius Scale Interface = SBI) has transmit and receive buffers. You can define the handshake parameter in the Setup menu:

– Hardware handshake (CTS/DTR) – Software handshake (XON, XOFF)

Hardware Handshake

With a 4-wire interface, 1 more character can be transmitted after CTS (Clear to Send).

Software Handshake

The software handshake is controlled via XON and XOFF. When a device is switched on, XON must be transmitted to enable any connected device to communicate.

Data Output by Print Command

The print command can be transmitted by pressing p or by a software command (Esc P).

Automatic Data Output

In the “auto print” operating mode, data is output to the interface port without a print command. You can choose to have data output automatically at defined print intervals with or without the stability parameter. Whichever parameter you select, the data will be output as the readouts appear on the balance/scale display. The display update frequency depends on the settings for “Adapting the filter” (1 1 x) and “Timedependent automatic printing” (6 3 x).

If you select the auto print setting, data will be transmitted immediately the moment you turn on the balance/scale. In the operating menu, you can define whether automatic printing can be stopped by pressing p.

Faster Output Speeds

If you require output speeds faster than 10 Hz, please contact Sartorius for information.

Pin Assignment Chart

Female interface connector:

25-contact D-Submini DB25S with screw-lock hardware

Male connector used (please use connectors with the same specifications): 25-pin D-Submini DB25 with integrated shielded cable clamp assembly (Amp 826 985-1C) and fastening screws (Amp type 164868-1)

! Warning When Using Pre-wired RS-232 Connecting Cables:

RS-232 cables purchased from other manufacturers often have incorrect pin assignments for use with Sartorius balances/scales. Be sure to check the pin assignment against the chart below before connecting the cable, and disconnect any lines marked “Internally Connected” (e.g., pin 6). Failure to do so may damage or even completely ruin your balance/scale and/or peripheral device.

Pin Assignment Chart:

Pin 1: Shield Pin 2: Data output (TxD) Pin 3: Data input (RxD) Pin 4: Internal ground (GND) Pin 5: Clear to send (CTS) Pin 6: Internally connected Pin 7: Internal ground (GND) Pin 8: Internal ground (GND) Pin 9: Reset _ In *) Pin 10: Not connected Pin 11: +12 V Pin 12: Reset _ Out *) For remote switch Pin 13: + 5 V Pin 14: Internal ground (GND) Pin 15: Universal remote switch Pin 16: Not connected Pin 17: Not connected Pin 18: Not connected Pin 19: Not connected Pin 20: Data terminal ready (DTR) Pin 21: Ground input for external supply voltage Pin 22: Not connected Pin 23: Not connected Pin 24: Ext. supply voltage input + 12 ... 30 V Pin 25: + 5 V

*) = Hardware restart

Cabling Diagram

Peripheral Device PC PC 25-pin or 9-pin

204

Type of cable: AWG 24 specification

– For connecting a computer or other peripheral device to the balance/scale using the

RS-232-C/V24 protocol and cables up to 15 m (50 ft.) long.

V24

Balance/scale

Error Codes

Error codes are shown on the main display for 2 seconds. The program then returns automatically to the previous mode (e.g., weighing).

Display Cause Solution

No segments appear No AC power is available Check the AC power supply on the display The AC adapter is not Plug in the AC adapter

plugged in

h The load exceeds the Unload the balance/scale

balance/scale capacity

l or Err 54 Something is touching Move the object that is

the load plate touching the load place

err 01 Data output not compatible Change the configuration in

with output format the operating menu

err 02 Calibration parameter Calibrate only when zero

not met; e.g.: is displayed – balance/scale not zeroed Press t to zero the

balance/scale

– balance/scale is loaded Unload the balance/scale

err 10 The t key is blocked Press c to clear the

when there is data in tare memory and release the second tare memory the tare key (net-total) – only 1 tare function can be used at a time

err 11 Tare memory not allowed Press t err 22 Weight is too light or there is no Increase the weight on the

sample on the balance/scale balance/scale

err 30 Interface port for printer Reset the menu (restore

output is blocked factory settings)

or Contact your local Sartorius Service Center

Display Cause Solution

err 235 Connecting cable not Connect the cable correctly on the CP225D connected correctly

Connection to junction Connect the equipment on a different balance/scale correctly

The weight readout Unstable ambient Set up the balance/scale changes constantly conditions in another area

A foreign object is caught Remove the foreign object between the load plate and the balance/scale frame

The weight readout The balance/scale has not Calibrate/adjust the is obviously wrong been calibrated/adjusted balance/scale

The balance/scale was not Tare or zero the balance/scale zeroed before weighing before weighing

If any other errors occur, contact your local Sartorius Service Center!

Contact information:

Please point your Internet browser to: www.sartorius.com

Care and Maintenance

Service

Regular servicing by a Sartorius technician will extend the service life of your balance/scale and ensure its continued weighing accuracy. Sartorius can offer you service contracts, with your choice of regular maintenance intervals ranging from 1 month to 2 years.

The optimum maintenance interval depends on the operating conditions at the place of installation and on the individual tolerance requirements.

Repairs

Repair work must be performed by trained service technicians. Any attempt by untrained persons to perform repairs may lead to hazards for the user.

Cleaning

!Unplug the AC adapter from the wall outlet

(mains supply). If you have an interface cable connected to the balance/scale port, unplug it from the port.

!Make sure that no liquid enters the

balance/scale housing

!Do not use any aggressive cleaning agents

(solvents or similar agents)

§ Clean the balance/scale using a piece

of cloth which has been wet with a mild detergent (soap)

§ After cleaning, wipe down the balance/scale

with a soft, dry cloth

Cleaning the Weighing Chamber and Draft Shield

§ Open the draft shield cover and take out

the removable parts

§ Use a hand-held vacuum cleaner and

mini-hose to remove any powdered sample material carefully.

§ Use blotting paper to remove any liquid sam-

ple material.

§ On models with a 3-sided draft shield,

pull the 3 draft shield walls upwards to remove, if necessary.

Safety Inspection

If there is any indication that safe operation of the balance/scale with the AC adapter is no longer warranted:

§ Turn off the power and disconnect the

equipment from AC power immediately

> Lock the equipment in a secure place

to ensure that it cannot be used for the time being

Safe operation of the balance/scale with the

AC adapter is no longer ensured when: – there is visible damage to the AC adapter. – the AC adapter no longer functions properly. – the AC adapter has been stored for a relatively

long period under unfavorable conditions.

Maintenance and repair work may be

performed only by service technicians who are

authorized by Sartorius and who – have access to the required maintenance man-

uals. – have attended the relevant service

training courses.

We recommend having the power supply

inspected by a certified electrician at

regular intervals, according to the checklist

given below: – Insulating resistance > 7 megaohms measured

with a constant voltage of at least 500 V at a

500 kohm load – Leakage current: < 0.05mA measured with a

properly calibrated multimeter

Instructions for Recycling the Packaging

To ensure safe shipment, your balance/scale has been packaged using environmentally friendly materials. After successful installation of the balance/scale, you should return this packaging for recycling.

For information on recycling options, including recycling of old weighing equipment, contact your municipal waste disposal center or local recycling depot.

Overview

Specifications

Competence Series/CP Series

Model CP225D CP324S CP224S CP124S CP64

Weighing capacity g 40/80/220 320 220 120 64

Readability mg 0.01/0.01/0.1 0.1 0.1 0.1 0.1

Tare range (subtractive) g –220 –320 –220 –120 –64 Repeatability (std. deviation) ≤±mg 0.02/0.05/0.1 0.2 0.1 0.1 0.1 Linearity ≤±mg 0.03/0.1/0.2 0.3 0.2 0.2 0.2 Response time (average) s ≤ 12/3 ≤ 3 ≤ 2 ≤ 2 ≤ 2

Operating temperature range °C +10.… +30 °C (50° to 86° F)

Allowable ambient operating temperature °C +5.… +40 °C (41°F to 104°F)

Sensitivity drift within

+10… +30 °C ≤±/K 1 ·10

–6

External calibration weight g 200 (E2) 200 + 200 (E2) 100 (E2) 50 (E2) (of at least accuracy class…) 100 (E2)

Net weight, approx. kg 7.6 6.5 6.5 6.5 6.5

Pan size (inner diameter)* mm 80 ‡

Pan surface* cm

Weighing chamber height (from pan to cover) mm 232

Dimensions (WƒDƒH) mm 213ƒ342ƒ340

Electronics box (WƒDƒH) mm 134ƒ51ƒ155

AC power source/ V~ AC adapter, 230 V or 115 V, +15%…–20% Power requirements (protection rating IP20)

Frequency Hz 48 – 60

Power consumption (average) VA maximum 16; typical 8

Approx. hours of operation with the YRB08Z rechargeable battery pack h 20 22 22 22 22

Selectable weight units Grams, carats, pounds, ounces, Troy ounces, Hong Kong taels,

Singapore taels, Taiwanese taels, grains, pennyweights, milligrams, parts per pound, Chinese taels, mommes, Austrian carats, tola, baht and mesghal

Built-in interface RS-232/V24-V28 Format: 7-bit ASCII, 1 start bit, 1 or 2 stop bits Parity: Mark, odd, even or space Transmission rates: 150 to 19,200 baud Handshake mode: Software or hardware

* Three-sided weighing pan: ‡ = Diameter of inner circle.

The cross-hatched section can be fully utilized.

Gem

plus

Series

Model GC1603P GC803S GC803P GC2502

Weighing capacity ct 800/1600 800 400/800 2,500 (500 g)

Readability ct 0.001/0.01 0.001 0.001/0.01 0.01 1)

Tare range (subtractive) ct –1600 –800 –800 –2,500 Repeatability (std. deviation) ≤± ct 0.001/0.01 0.001 0.001/0.01 0.01 Linearity ≤± ct 0.002 0.001 0.001 0.01 Response time (average) s ≤ 2

Operating temperature range °C +10.… +30 °C (50°F to 86°F)

Allowable ambient operating temperature °C +5.… +40 °C (41°F to 104°F)

Sensitivity drift within

+10… +30 °C ≤±/K 1 ·10

–6

1 ·10

–6

1 ·10

–6

2 ·10

–6

External calibration weight g 200 + 100 (E2) 100 (E2) 200 (F1) (of at least accuracy class…) 100 (E2)

Net weight, approx. kg 6.1

Pan size (inner diameter)* mm 80 ‡ 80 ‡ 80 ‡ 110 ‡

Pan surface* cm

64 64 64 120

Weighing chamber height (from pan to cover) mm 162

Dimensions (WƒDƒH) mm 213ƒ342ƒ270

AC power source/ V~ AC adapter, 230 V or 115 V, +15%…–20% Power requirements (protection rating IP20)

Frequency Hz 48 – 60

Power consumption (average) VA maximum 16; typical 8

Approx. hours of operation with the YRB08Z rechargeable battery pack h 22 22 22 27

Selectable weight units Grams, carats, pounds, ounces, Troy ounces, Hong Kong taels,

Singapore taels, Taiwanese taels, grains, pennyweights, milligrams, parts per pound, Chinese taels, mommes, Austrian carats, tola, baht and mesghal

Built-in interface RS-232/V24-V28 Format: 7-bit ASCII, 1 start bit, 1 or 2 stop bits Parity: Mark, odd, even or space Transmission rates: 150 to 19,200 baud Handshake mode: Software or hardware

) For readability 0.005 ct, select menu code 1 8 1 or 3 2 1 (see “Configuring the Balance/Scale”)

* Three-sided weighing pan: ‡ = Diameter of inner circle.

The cross-hatched section can be fully utilized.

Competence Series/CP Series

Model CP423S CP323S CP323P CP153

Weighing capacity g 420 320 80/160/320 150

Readability g 0.001 0.001 0.001/0.002/ 0.001

0.005

Tare range (subtractive) g –420 –320 –320 –150 Repeatability (std. deviation) ≤± g 0.001 0.001 0.001/0.001/ 0.001

0.003

Linearity ≤± g 0.002 0.002 0.002/0.002/ 0.001

0.005

Response time (average) s ≤ 1.5

Operating temperature range °C +10.…+30 °C (50°F to 86°F)

Allowable ambient operating temperature °C 0.…+40 °C (32°F to 104°F)

Sensitivity drift within +10…+30 °C ≤±/K 2 ·10

–6

External calibration weight g 200 (F1) 200 (F1) 100 (F1) 100 (F1) (of at least accuracy class…)

Net weight, approx. kg 3.7

Pan size (inner diameter)* mm 110 ‡

Pan surface* cm

120

Weighing chamber height (from pan to cover) mm 50

Dimensions (WƒDƒH) mm 213ƒ342ƒ153

AC power source/ V~ AC adapter, 230 V or 115 V, +15%…–20% Power requirements (protection rating IP20)

Frequency Hz 48 – 60

Power consumption (average) VA maximum 16; typical 8

Approx. hours of operation with the YRB08Z rechargeable battery pack h 27

Selectable weight units Grams, carats, pounds, ounces, Troy ounces, Hong Kong taels,

Singapore taels, Taiwanese taels, grains, pennyweights, milligrams, parts per pound, Chinese taels, mommes, Austrian carats, tola, baht and mesghal

Built-in interface RS-232/V24-V28 Format: 7-bit ASCII, 1 start bit, 1 or 2 stop bits Parity: Mark, odd, even or space Transmission rates: 150 to 19,200 baud Handshake mode: Software or hardware

* Three-sided weighing pan: ‡ = Diameter of inner circle.

The cross-hatched section can be fully utilized.

Competence/CP Series and Gem

plus

Series

Model CP4202S CP3202S, CP3202P CP2202S

GP3202

Weighing capacity g 4,200 3,200 800/1,600/ 2,200

3,200

Readability g 0.01 0.01 0.01/0.02/ 0.01

0.05

Tare range (subtractive) g –4,200 –3,200 –3,200 –2,200 Repeatability (std. deviation) ≤± g 0.01 0.01 0.01/0.01/0.03 0.01 Linearity ≤± g 0.02 0.02 0.02/0.02/0.05 0.02 Response time (average) s ≤ 1.5

Operating temperature range °C +10.…+30 °C (50°F to 86°F)

Allowable ambient operating temperature °C 0.…+40 °C (32°F to 104°F)

Sensitivity drift within +10…+30 °C ≤±/K 2 ·10

–6

External calibration weight g 2,000 (F1) 2,000 (F1) 1,000 (F1) 1,000 (F1) (of at least accuracy class…)

Net weight, approx. kg 4.0

Pan size mm 190ƒ204

Pan surface cm

369

Dimensions (WƒDƒH) mm 213ƒ342ƒ88

AC power source/ V~ AC adapter, 230 V or 115 V, +15%…–20% Power requirements (protection rating IP20)

Frequency Hz 48 – 60

Power consumption (average) VA maximum 16; typical 8

Approx. hours of operation with the YRB08Z rechargeable battery pack h 27

Selectable weight units Grams, kilograms, carats, pounds, ounces, Troy ounces,

Hong Kong taels, Singapore taels, Taiwanese taels, grains, pennyweights, milligrams, parts per pound, Chinese taels, mommes, Austrian carats, tola, baht and mesghal

Built-in interface RS-232/V24-V28 Format: 7-bit ASCII, 1 start bit, 1 or 2 stop bits Parity: Mark, odd, even or space Transmission rates: 150 to 19,200 baud Handshake mode: Software or hardware

Competence Series/CP Series

Model CP622 CP8201, CP6201 CP4201 CP2201

GP8201

Weighing capacity g 620 8,200 6,200 4,200 2,200

Readability (scale interval) g 0.01 0.1 0.1 0.1 0.1

Tare range (subtractive) g –620 –8,200 –6,200 –4,200 –2,200 Repeatability (std. deviation) ≤±g 0.01 0.1 0.1 0.1 0.1 Linearity ≤±g 0.02 0.2 0.2 0.2 0.2 Response time (average) s ≤ 1

Operating temperature range °C +10.…+30 °C (50°F to 86°F)

Allowable ambient operating temperature °C 0.…+40 °C (32°F to 104°F)

Sensitivity drift ≤±/K 5 ·10

–6

5 ·10

–6

5 ·10

–6

10 · 10

–6

10 · 10

–6

within +10…+30 °C

External calibration weight g 500 (F2) 5,000 (F1) 5,000 (F2) 2,000 (F2) 2,000 (F2) (of at least accuracy class…)

Net weight. approx. kg 2.8 3.6 3.6 3.6 3.6

Pan size mm 154 ‡* 190ƒ204 190ƒ204 190ƒ204 190ƒ204

Pan surface cm

227* 369 369 369 369

Dimensions (WƒDƒH) mm 213ƒ342ƒ90

AC power source/ V~ AC adapter, 230 V or 115 V, +15%…–20% power requirements (protection rating IP20)

Frequency Hz 48 – 60

Power consumption (average) VA maximum 16; typical 8

Approx. hours of operation with the YRB05Z rechargeable battery pack h 40

Selectable weight units Grams, kilograms, carats, pounds, ounces, Troy ounces,

Hong Kong taels, Singapore taels, Taiwanese taels, grains, pennyweights, milligrams, parts per pound, Chinese taels, mommes, Austrian carats, tola, baht and mesghal

Built-in interface RS-232/V24-V28 Format: 7-bit ASCII, 1 start bit, 1 or 2 stop bits Parity: Mark, odd, even or space Transmission rates: 150 to 19,200 baud Handshake mode: Software or hardware

* Three-sided weighing pan: ‡ = Diameter of inner circle.

The cross-hatched section can be fully utilized.

Competence Series/CP Series

Model CP34001S CP34001P CP16001S CP12001S CP34000

Weighing capacity kg 34 8/16/34 16 12 34

Readability (scale interval) g 0.1 0.1/0.2/0.5 0.1 0.1 1

Tare range (subtractive) kg –34 –34 –16 –12 –34 Repeatability (std. deviation) ≤±g 0.1 0.05/0.05/0.1 0.05 0.05 0.5 Linearity ≤±g 0.2 0.2 0.2 0.2 0.5 Response time (average) s ≤ 2 ≤ 2 ≤ 2 ≤ 2 ≤ 1.5

Operating temperature range °C +10.…+30 °C (50°F to 86°F)

Allowable ambient operating temperature °C 0.…+40 °C (32°F to 104°F)

Sensitivity drift within +10…+30 °C ≤±/K 2·10

–6

External calibration weight kg 10 (F1) 10 (F2) 10 (F1) 10 (F1) 10 (F2) (of at least accuracy class…)

Net weight, approx. kg 16

Pan size mm 300x400

Dimensions (WƒDƒH) mm 313ƒ532ƒ120

AC power source/ V~ AC adapter, 230 V or 115 V, Power requirements (protection rating IP20)

Frequency Hz 48 – 60

Power consumption (average) VA maximum 16; typical 8

Approx. hours of operation with the YRB06Z rechargeable battery pack h 22

Selectable weight units Grams, kilograms, carats, pounds, ounces, Troy ounces,

Hong Kong taels, Singapore taels, Taiwanese taels, grains, pennyweights, milligrams, parts per pound, Chinese taels, mommes, Austrian carats, tola, baht and mesghal

Built-in interface RS-232/V24-V28 Format: 7-bit ASCII, 1 start bit, 1 or 2 stop bits Parity: Mark, odd, even or space Transmission rates: 150 to 19,200 baud Handshake mode: Software or hardware

Specifications

Verified models with EC type approval Competence Series/CP Series

Model CP225D-0CE CP324S-0CE CP224S-0CE CP124S-0CE, CP64-0CE

CP124S-ACE

Type BC BL 100 BC BL 100 BC BL 100 BC BL 100 BC BL 100

Accuracy class1) k kkkk

Maximum capacity, Max.1) g 80/220 320 220 120 64

Scale interval, d1) mg 0.01/0.1 0.1 0.1 0.1 0.1 Tare range (subtractive) g ≤ 100% of the maximum capacity

Verification scale interval, e1) g 0.001 0.001 0.001 0.001 0.001

Minimum capacity, Min.1) g 0.001 0.01 0.01 0.01 0.01 Stabilization time (average) s ≤ 12/3 ≤ 3 ≤ 2 ≤ 2 ≤ 2

Range of use g 0.001–220 0.01–320 0.01–220 0.01–120 0.01–64 (according to CD1)

Allowable ambient operating temperature °C +15… +25 (50°F to 77°F)

External calibration weight g 200 (E2) 200 + 200 (E2) 100 (E2) 50 (E2) (of at least accuracy class) 100 (E2)

Net weight, approx. kg 7.6 6.5 6.5 6.5 6.5

Pan size (inner diameter)* mm 80 ‡

Pan area* cm

Weighing chamber height (from pan to sliding cover) mm 232

Dimensions (WƒDƒH) mm 213ƒ342ƒ340

Electronics box (WƒDƒH) mm 134ƒ51ƒ155

AC power source/ V~ AC adapter STNG6 230 VAC or 115 VAC, Power requirements +15%…–20% (protection rating IP20)

Frequency Hz 48 – 60

Power consumption (average) VA maximum: 16; average: 8

Approx. hours of operation with the YRB05Z rechargeable battery pack h 20 22 22 22 22

Selectable weight units Grams, milligrams, carats

Built-in interface RS-232C-S/V24-V28; 7-bit;

parity: even, mark, odd, space; transmission rates 150...19,200 baud; 1 or 2 stop bits; software/hardware handshake

) CD = Council Directive 90/384/EEC on non-automatic weighing instruments;

applicable to the European Economic Area

* Three-sided weighing pan: ‡ = Diameter of inner circle.

The cross-hatched section can be fully utilized.

Gem

plus

Series

Model GC1603S-0CE GC803S-0CE Type BC BL 100 BC BL 100

Accuracy class1) kk

Maximum capacity, Max.1) ct 1,600 800

Readability ct 0.001 0.001 Tare range (subtractive) ct ≤ 100% of the maximum capacity

Verification scale interval, e1) mct 10 10

Minimum capacity, Min.1) ct 0.1 0.1 Stabilization time (average) s ≤ 2

Range of use ct 0.1–1,600 0.1–800 according to CD 1)

Allowable ambient operating temperature °C +15… +25 (50°F to 77°F)

External calibration weight g 200 + 100 (E2) (of at least accuracy class) 100 (E2)

Net weight, approx. kg 6.1

Pan size (inner diameter)* mm 80 ‡ 80 ‡

Pan area* cm

64 64

Weighing chamber height (from pan to sliding cover) mm 162

Dimensions (WƒDƒH) mm 213ƒ342ƒ270

AC power source/ V~ AC adapter STNG6 230 VAC or 115 VAC, Power requirements +15%…–20% (protection rating IP20)

Frequency Hz 48 – 60

Power consumption (average) VA maximum: 16; average: 8

Approx. hours of operation with the YRB05Z rechargeable battery pack h 22 22

Selectable weight units Grams, milligrams, carats

Built-in interface RS-232C-S/V24-V28; 7-bit;

parity: even, mark, odd, space; transmission rates 150...19,200 baud; 1 or 2 stop bits; software/hardware handshake

) CD = Council Directive 90/384/EEC on non-automatic weighing instruments;

applicable to the European Economic Area

* Three-sided weighing pan: ‡ = Diameter of inner circle.

The cross-hatched section can be fully utilized.

Competence Series/CP Series

Model CP423S-0CE CP323S-0CE CP323P-0CE CP153-0CE Type BD BL 100 BD BL 100 BD BL 100 BD BL 100

Accuracy class1) K KKK

Maximum capacity, Max.1) g 420 320 80/160/320 150

Scale interval, d1) g 0.001 0.001 0.001/0.002/ 0.001

0.005

Tare range (subtractive) g < 100% of the maximum capacity

Verification scale interval, e1) g 0.01 0.01 0.01 0.01

Minimum capacity, Min.1) g 0.02 0.02 0.02 0.02

Response time (average) s < 1.5

Range of use according to CD1) g 0.02–420 0.01–320 0.02–320 0.02–150

Allowable ambient operating temperature °C +10…30 (50°F to 86°F)

Net weight, approx. kg 4.6

Pan size (inner diameter)* mm 110 d

Pan area* cm

120

Weighing chamber height (from pan to sliding cover) mm 50

Dimensions (W+D+H) mm 213+342+153

AC power source/ V~ AC adapter STNG6 230 VAC or 115 VAC, Power requirements +15%…–20% (protection rating IP20)

Frequency Hz 48 – 60

Power consumption (average) VA maximum: 16; average: 8

Approx. hours of operation with the YRB05Z rechargeable battery pack h 27

Selectable weight units Grams, carats

Built-in interface RS-232C-S/V24-V28; 7-bit;

parity: even, mark, odd, space; transmission rates 150...19,200 baud; 1 or 2 stop bits; software/hardware handshake

) CD = Council Directive 90/384/EEC on non-automatic weighing instruments;

applicable to the European Economic Area

* Three-sided weighing pan: d = Diameter of inner circle.

The cross-hatched section can be fully utilized.

Competence/CP and Gem

plus

Series

Model CP4202S-0CE, CP3202S-0CE, CP3202P-0CE CP2202S-0CE

CP4202S-ACE CP3202S-ACE,

GP3202

Type BD BL 200 BD BL 200 BD BL 200 BD BL 200

Accuracy class1) K KKK

Maximum capacity, Max.1) g 4,200 3,200 800/1600/ 2,200

3,200

Scale interval, d1) g 0.01 0.01 0.01/0.02/ 0.01

0.05

Tare range (subtractive) g < 100% of the maximum capacity

Verification scale interval, e1) g 0.1 0.1 0.1 0.1

Minimum capacity, Min.1) g 0.5 0.5 0.5 0.5

Response time (average) s < 1.5

Range of use according to CD1) g 0.5–4,200 0.5–3,200 0.5–3,200 0.5–2,200

Allowable ambient operating temperature °C +10.…+30 (50° to 86°F)

Net weight, approx. kg 4.7

Pan size mm 190+204

Pan area cm

369

Dimensions (W+D+H) mm 213+342+88

AC power source/ V~ AC adapter STNG6 230 VAC or 115 VAC, Power requirements +15%…–20% (protection rating IP20)

Frequency Hz 48 – 60

Power consumption (average) VA maximum: 16; average: 8

Approx. hours of operation with the YRB05Z rechargeable battery pack h 27

Selectable weight units Grams, kilograms, carats

Built-in interface RS-232C-S/V24-V28; 7-bit;

parity: even, mark, odd, space; transmission rates 150...19,200 baud; 1 or 2 stop bits; software/hardware handshake

) CD = Council Directive 90/384/EEC on non-automatic weighing instruments;

applicable to the European Economic Area

Competence Series/CP Series

Model CP622-0CE CP8201-0CE CP6201-0CE CP2201-0CE Type BD BL 200 BD BL 200 BD BL 200 BD BL 200

Accuracy class1) K KKK

Maximum capacity, Max.1) g 620 8,200 6,200 2,200

Scale interval, d1) g 0.01 0.1 0.1 0.1

Tare range (subtractive) g < 100% of the maximum capacity

Verification scale interval, e1) g 0.1 1 1 0.1

Minimum capacity, Min.1) g 0.5 5 5 5

Response time (average) s < 1

Range of use according to CD1) g 0.5–620 5–8,200 5–6,200 5–2,200

Allowable ambient operating temperature °C +10.…+30 (50°F to 86°F)

Net weight, approx. kg 4.7

Pan size mm 190+204

Pan area cm2 369

Dimensions (W+D+H) mm 213+342+90

AC power source/ V~ AC adapter STNG6 230 VAC or 115 VAC, Power requirements +15%…–20% (protection rating IP20)

Frequency Hz 48 – 60

Power consumption (average) VA maximum: 16; average: 8

Approx. hours of operation with the YRB05Z rechargeable battery pack h 40

Selectable weight units Grams, kilograms, carats

Built-in interface RS-232C-S/V24-V28; 7-bit;

parity: even, mark, odd, space; transmission rates 150...19,200 baud; 1 or 2 stop bits; software/hardware handshake

) CD = Council Directive 90/384/EEC on non-automatic weighing instruments;

applicable to the European Economic Area

Accessories (Options)

Product Order No.

Data printer YDP03-0CE

with date/time, statistics evaluation and transaction counter functions and LCD

Remote display, reflective (data interface required) YRD02Z

Remote display, transmissive (for overhead projectors) (data interface required) YRD13Z

External rechargeable battery pack

– for models with weighing capacities

under 10 kg YRB05Z

– for models with weighing capacities

over 10 kg YRB06Z

> with battery-level indicator (LED);

can be recharged using the AC adapter (time it takes to charge the discharged battery pack: 15 hours); see “Specifications” for hours of operation

To recharge the battery pack:

– Unplug the AC adapter from

the balance/scale and plug it into the battery pack

Carrying case

– for models with analytical

draft shield chamber YDB01CP

– for models with weighing capacities

up to 10 kg and without analytical draft shield chamber YDB02CP

Calibration weights:

For model: Accuracy Weight Order no.*:

class (OIML) in grams

CP64 E2 1ƒ50 YCW4528-00 CP124S, GC803S, GC803P E2 1ƒ100 YCW5128-00 CP323P, CP153 F1 1ƒ100 YCW5138-00 CP225D, CP224S E2 1ƒ200 YCW5228-00 CP324S, GC1603P E2 1ƒ200+ YCW5228-00+

1ƒ100 YCW5128-00 CP423S, CP323S, GC2502 F1 1ƒ200 YCW5238-00 CP622 F2 1ƒ500 YCW5548-00 CP3202P, CP2202S F1 1ƒ1000 YCW6138-00 CP4202S, CP3202S,

GP3202, CP4201, CP2201 F1 1ƒ2000 YCW6238-00 CP8201, CP6201 F1 1ƒ5000 YCW6538-00 CP34001S, CP34001P,

CP16001S, CP12001S, CP34000 F1 1ƒ10000 YCW7138-00

SartoConnect data transfer software YSC01L for connecting your Sartorius balance/scale to a PC running the Windows 95, 98 or NT operating system.

This software lets you transfer the data recorded by your balance/scale to any PC application program (e.g., Excel).

Density determination kit

– for CP225D, CP324S, CP124S, CP64 YDK01

Antistatic weighing pan

– for CP225D, CP324S, CP124S, CP64 YWP01CP

Dust cover Information

for precision balances/scales on request

*= All weights can also be suplied with a DKD certificate, if requested by adding -02 to the order

number (YCW....-02); DKD certificates issued by the German Calibration Service are

recognized throughout the member states of the Western European Calibration Cooperation

Product Order No.

Industrial AC adapter, model ING1

for balances/scales with weighing capacities of up to 10 kg; protection rating: IP65 in accordance with DIN VDE 0470/ DIN EN 60529

– for 230 V 69 71476 – for 120 V 69 71480

Industrial AC adapter, model ING2

for balances/scales with weighing capacities over 10 kg; protection rating: IP65 in accordance with DIN VDE 0470/ DIN EN 60529

– for 230 V 69 71899 – for 120 V 69 71500

Analytical draft shield chamber

– for CP423S, CP323S, CP323P,

CP153, GC2502 YDS01CP

Draft shield cover with opening

– for CP423S, CP323S, CP323P,

CP153, GC2502 YDS02CP

Data cable

– for PC-connection, 25-pin 7357312 – for PC-connection, 9-pin 7357314

Adapter: D-Sub 25-pin 6965619 to D-Sub 9-position; length: 0.25 m

Universal remote control switch

for remote control of one of the following functions (configured in the balance/scale menu): p, t, c or v (see “Configuring the Balance/Scale” for details): Foot switch with T-connector YFS01 Hand switch with T-connector YHS02

T-connector YTC01

!The T-connector is not intended for use

with multiple intelligent peripheral devices, such as PCs or YDP03-0CE printers.

Declaration of Conformity

Weighing Instruments for Use in Legal Metrology: Council Directive 90/384/EEC “Non-automatic weighing instruments”

This Directive regulates the determination of mass in legal metrology.

For the respective Declaration of Type Conformity for weighing instruments that have been verified by Sartorius for use as legal measuring instruments and that have an EC Type-Approval Certificate, see the page after next.

This Directive also regulates the performance of the EC verification by the manufacturer, provided that an EC Type-Approval Certificate has been issued and the manufacturer has been accredited by an officer of a Notified Body registered at the Commission of the European Community for performing such verification.

Sartorius complies with EC Directive No. 90/384/EEC for non-automatic weighing instruments, which has been in effect since January 1, 1993, within the Single European Market, as well as the accreditation of the Quality Management System of Sartorius AG by Lower Saxony’s Regional Administrative Department of Legal Metrology (Niedersächsisches Landesverwaltungsamt – Eichwesen) from February 15, 1993.

For additional information on the C mark on Sartorius equipment, see Sartorius Publication No. W--0052-e93081.

“EC Verification“ – A Service Offered by Sartorius

Our service technicians authorized to perform the verification* of your weighing instruments that are acceptable for legal metrological verification can inspect and verify the metrological specifications at the place of installation within the Member States of the European Union and the Signatories of the Agreement on the European Economic Area.

Subsequent Verifications within the European Countries

The validity of the verification will become void in accordance with the national regulations of the country in which the weighing instrument is used. For information on verification and legal regulations currently applicable in your country, and to obtain the names of the persons to contact, please contact your local Sartorius office, dealer or service center.

For more information on the verification of weighing instruments for use in legal metrology, contact the Sartorius Service Center.

* = in accordance with the accreditation

certificate received by Sartorius AG

Sartorius AG Weender Landstrasse 94–108 37075 Goettingen, Germany

Phone +49.551.308.0 Fax +49.551.308.32 89 www.sartorius.com

Copyright by Sartorius AG, Goettingen, Germany. All rights reserved. No part of this publication may be reprinted or translated in any form or by any means without the prior written permission of Sartorius AG. The status of the information, specifications and illustrations in this manual is indicated by the date given below. Sartorius AG reserves the right to make changes to the technology, features, specifications and design of the equipment without notice.

Status: Dezember 2001, Sartorius AG, Goettingen, Germany

Printed in Germany on paper that has been bleached without any use of chlorine W3A000.CP · KT Publication No.: WCP6001-e01125

Sartorius GC803S, CP64, CP124S, GC803P, GC2502 Operating Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual