Sartorius ENTRIS64I-1SUS, ENTRIS8201-1SUS, ENTRIS8201I-1SUS, ENTRIS623I-1SUS, ENTRIS64-1SUS Data Sheet

...

Download

Entris

Benefits

– Monolithic weigh cell for long-term high accuracy – Built-in applications and function keys for convenient

operation

– Backlit, high-contrast display for user-friendly

guidance

Product Information

Get the reliability and quality of a Sartorius balance, but only pay for the features you really need.

Entris

has been specially designed to deliver effective and reliable weighing results in your daily work. The easy and clearly structured user interface, the logical key assignment and excellent readability are ideal features for error-free operation.

Laboratory Balances

Technical Specifications

Specifications Int. weight circuit

calibration

All models with the designation ENTRIS...i-1xx are equipped with an internal weight

Mains connection, voltage, frequency

via desktop power supply, 100-240 V AC, ±10%, 50 – 60 Hz

Power consumption maximum 16 VA; average 8 VA

(including power supply)

Operating time with

approx. 35 h external battery YRB11Z (display backlighting on)

Standard Equipment Levelling Glass level indicator with air

bubble for centering Calibration External calibration

Selectable weight units

Grams, Kilograms, Carats, Pounds,

Ounces, Troy ounces, Hong Kong taels,

Singapore taels, Taiwan taels, Grains,

Pennyweights, Milligrams, Parts per

pound, China taels, Mommes, Austrian

carats, Tola, Baht, Mesghal, Tons,

Pounds: ounces, Newton Interface RS232C 25-pin Display White backlit, high-contrast

display with 15 mm digits Standard built-in

applications

Weighing, Density, Percentage,

Counting, Animal Weighing,

Conversion Languages English, French, German, Italian,

Polish, Russian, Spanish Anti-theft lock Lockdown capability for cable

or chain Underfloor weighing Integrated

Ambient Conditions The specifications apply when the following ambient conditions

are in place: Environment for indoor use only Ambient temperature* +10° C … +30° C (+50° F ... +86° F) Operational capacity guaranteed between

+5° C … +40° C (+41° F … +104° F) Storage and shipping –10 ° C ... +60 ° C (+14° F ... +140° F) Elevation up to 3000 m above sea level Relative humidity 15% to 80% for temperatures up to

31 °C; non-condensing, decreasing

linearly to 50% relative humidity at

40 °C and 20% at 50 °C Safety of electrical

equipment

in accordance with

EN 61010-1/IEC 61010-1

Safety requirements for electrical

equipment for mea surement,

control, and laboratory use – Part 1:

General requirements Electromagnetic

compatibility

in accordance with

EN 61326-1/IEC 61326-1

Electrical equipment for measure-

ment, control, and laboratory

use – EMC requirements - Part 1:

General requirements Defined immunity to

Suitable for use in industrial areas interference

Interference emission Class B (suitable for use in residential

areas and areas that are connected

to a low voltage network that also

supplies residential buildings). The

device can therefore be used in both

areas.

Depending on country-specific model

Design 1 Design 2 Design 3 Design 4

Analytical Balances Entris

Model ENTRIS224i-1x

ENTRIS124i-1x

ENTRIS64i-1x

Design 1 1 1 Weighing capacity g 220 120 60 Readability mg 0.1 0.1 0.1 Repeatability (standard deviation) mg 0.1 0.1 0.1 Linearity deviation mg 0.2 0.2 0.2

Sensitivity drift between +10 °C and +30 °C ± ppm/K 3 3 3 Typical stabilization time s 2.5 2.5 2.5 Weighing pan size mm

d 90 d 90 d 90 Weighing chamber height* mm 230 230 230 Net weight, approx. kg 4.8 4.8 4.8 Calibration Internal Internal Internal

Precision Balances Entris

Model ENTRIS

623i-1x

ENTRIS 423i-1x

ENTRIS 323i-1x

ENTRIS 153i-1x

ENTRIS 6202i-1x

ENTRIS

4202i-1x

ENTRIS

3202i-1x

ENTRIS

2202i-1x

Design 2 2 2 2 4 4 4 4 Weighing capacity g 620 420 320 150 6,200 4,200 3,200 2,200 Readability mg 1 1 1 1 10 10 10 10 Repeatability (standard deviation) mg 1 1 1 1 10 10 10 10 Linearity deviation mg 2 2 2 2 30 30 30 30 Sensitivity drift between

± ppm/K 3 3 3 3 4 4 4 4

+10 °C and +30 °C Typical stabilization time s 1.0 1.0 1.1 1.3 1.5 1.5 1.5 1.5 Weighing pan size mm

d 115 d 115 d 115 d 115

180 × 180 180 × 180 180 × 180 180 × 180 Weighing chamber height* mm 50 50 50 50 – – – – Net weight, approx. kg 3.6 3.6 3.6 3.0 3.5 3.5 3.5 3.5 Calibration Internal Internal Internal Internal Internal Internal Internal Internal

Model ENTRIS822i-1x

ENTRIS8201i-1x

ENTRIS5201i-1x

ENTRIS2201i-1x

Design 3 4 4 4 Weighing capacity g 820 8,200 5,200 2,200 Readability mg 10 100 100 100 Repeatability (standard deviation) mg 10 100 100 100 Linearity deviation mg 30 300 300 300 Sensitivity drift between

± ppm/K 4 8 8 8

+10 °C and +30 °C Typical stabilization time s 1.5 1.5 1.5 1.5 Weighing pan size mm

d 150

180 × 180 180 × 180 180 × 180 Net weight, approx. kg 2.6 3.5 3.5 3.5 Calibration Internal Internal Internal Internal

* Upper edge of the weighing pan to the lower edge of the upper draft shield panel

Possible terms for country-specific models:

x = S: Standard balances without country-specific additions x = SUS: Standard balances with country-specific additions for USA

Laboratory Balances 3

Analytical Balances Entris

Model ENTRIS224-1x

ENTRIS124-1x

ENTRIS64-1x

Design 1 1 1 Weighing capacity g 220 120 60 Readability mg 0.1 0.1 0.1 Repeatability (standard deviation) mg 0.1 0.1 0.1 Linearity deviation mg 0.2 0.2 0.2

Sensitivity drift between +10 °C and +30 °C ± ppm/K 3 3 3 Typical stabilization time s 2.5 2.5 2.5 Weighing pan size mm

d 90 d 90 d 90 Weighing chamber height* mm 230 230 230 Net weight, approx. kg 4.4 4.4 4.4 Calibration External External External

Precision Balances Entris

Model ENTRIS

623-1x

ENTRIS 423-1x

ENTRIS 323-1x

ENTRIS 153-1x

ENTRIS 6202-1x

ENTRIS 4202-1x

ENTRIS 3202-1x

ENTRIS 2202-1x

± ppm/K 3 3 3 3 4 4 4 4

+10 °C and +30 °C Typical stabilization time s 1.0 1.0 1.1 1.3 1.5 1.5 1.5 1.5 Weighing pan size mm

d 115 d 115 d 115 d 115

180 × 180 180 × 180 180 × 180 180 × 180 Weighing chamber height* mm 50 50 50 50 – – – – Net weight, approx. kg 3.2 3.2 3.2 2.6 3.1 3.1 3.1 3.1 Calibration External External External External External External External External

Model ENTRIS822-1x

ENTRIS8201-1x

ENTRIS5201-1x

ENTRIS2201-1x

± ppm/K 4 8 8 8

+10 °C and +30 °C Typical stabilization time s 1.5 1.5 1.5 1.5 Weighing pan size mm

d 150

180 × 180 180 × 180 180 × 180 Net weight, approx. kg 2.0 2.7 2.7 2.7 Calibration External External External External

* Upper edge of the weighing pan to the lower edge of the upper draft shield panel

Possible terms for country-specific models:

x = S: Standard balances without country-specific additions x = SUS: Standard balances with country-specific additions for USA

Optional Accessories

Printer Data printer YDP20-0CE Paper rolls, 5 units, each with 40 m 6906937 Ink ribbon cassette 6906918

Data Cable RS232 25pin male | USB-cable type A,

length approx. 1.8 m RS232 25pin male | 25pin female,

length approx. 1.5 m RS232 25pin male | 9pin female,

length approx. 2.0 m RS232 25pin male | 9pin female,

length approx. 0.5 m

Density Determination Density determination kit for balances

with a readability of 0.1 mg

In-use Dust Cover for models with a rectangular weighing pan 6960ED01 for models with a round weighing pan

(d 150 mm)

Dust Cover for models with a readability of 0.1 mg 6960BP08

Weighing Table made of wood with stone plate YWT09 made of stone, with vibration dampening YWT03

YCC01-USBM2

7357312

7357314

6965619

YDK03

6960ED02

Calibration Weights Calibration for lab balance model 224

– Proof Line knob weight 200 g,

OIML class E2, with DAkkS certificate

Calibration for lab balance model 124 – Proof Line knob weight 100 g,

OIML class E2, with DAkkS certificate

Calibration for lab balance model 64 – Proof Line knob weight 50 g,

OIML class E2, with DAkkS certificate

Calibration for lab balance model 623 – Proof Line knob weight 500 g,