Simplifies balance leveling—with built-in real-time
level support
-
Increases reliability of weighing results—using integrated
protection systems
-
Controlled access to balance settings—with user
management
-
Gapless documentation—thanks to CalAuditTrail
-
Product Information
No matter what you are weighing, the new Entris® II balance
is always the right choice. Offering unrivalled value and
backed by almost 150 years of German engineering
expertise, the Entris® II comes in two product lines, so you
can find the balance that meets your specific weighing
needs.
Our Entris® II Advanced line gives additional value to the
Entris II portfolio, with over 38 models offering benefits such
as real-time level support, integrated protection systems,
Cal Audit Trail, a graphic touch display and 13 built-in application programs.
Technical Specifications
General Technical Data
Ambient ConditionsValue
Installation siteFor indoor use only, max. height above sea level3000 m
TemperatureEnvironment (metrological data)*
Environment
Storage and transport
Relative humidity** At temperatures up to 31° C, non-condensing, then linear decrease
from max. 80% at 31° C to max. 50% at 40° C
No heat from heating systems or direct sunlight
No electromagnetic fields
Power Supply DeviceValue
Input voltage
Power consumption, max4 W
Only by Sartorius power supply unit YEPS01-15V0W with interchangeable country-specific plug-in AC adaptors
+10 – +30° C
+5 – +40° C
-10 – +60° C
15 – 80%
15 V
DC
(±10%)
Interfaces
Specifications of the RS232 Interface
Type of interface Serial interface
Interface operation Full duplex
Level RS232
Connection D-sub connector, 9-pin
Maximum cable length 10 m
Pin assignment
Specifications for the USB-C Interface
Communication USB UTL
Connectable devices Sartorius printers, Sartorius second display, FTDI cable or USB memory stick
Specifications for the PC-USB Interface
CommunicationUSB Device
Connectable devicesPC
Pin 1: Not assigned
Pin 2: Data output (TxD)
Pin 3: Data input (RxD)
Pin 4: Not assigned
Pin 5: Internal ground
Pin 6: Not assigned
Pin 7: Clear to Send (CTS)
Pin 8: Request to Send (RTS)
Pin 9: Universal key
Power Supply UnitValue
Type: Sartorius power supply unit YEPS01-15V0W
PrimaryVoltage
Frequency
Current consumption, maximum
SecondaryVoltage
Current, maximum
Short-circuit protectionElectronic
Protection class according to IEC 60950-1 II
Pollution level according to IEC 61010-1 2
Overvoltage category according to IEC 60664-1 II
Other data: See label on the power supply unit
Electromagnetic Compatibility
Interference resistance: Suitable for use in industrial areas
Transient emissions Class B
Suitable for use in residential areas and areas that are connected to
a low voltage network that also supplies residential buildings
Materials
Housing Polybutylene terephthalate (PBT)
Control module Glass
Draft shield Glass | polybutylene terephthalate (PBT)
Weighing pan Stainless steel
Warm-up TimeValue
Device, approx2 h
* For conformity-assessed (verified) balances in accordance with EU requirements, refer to the information on the balance.
** For conformity-assessed (verified) balances in accordance with EU requirements, the legal regulations apply.
100 – 240 V
50 - 60 Hz
0.2 A
(±5%)
15 V
DC
0.53 A
(±10%)
AC
Calibration
Internal calibration isoCAL (models with marking i-1x)
External calibration
Selectable Weight Units*
Gram, kilogram, carat, pound, ounce, troy ounce, Hong Kong tael, Singapore tael, Taiwan tael, grain, pennyweights,
milligram, parts per pound, China tael, mommes, Austrian carat, tola, baht, mesghal and Newton
Readability | Scale interval (d)mg0.10.10.10.111111101010101010100100100100100
Maximum capacity (Max)g320220120601,2006204203202206,2004,2003,2002,2001,20082012,20010,2008,2005,2002,200
Weighing systemEMCEMCEMCEMCEMCEMCEMCEMCEMCEMCEMCEMCEMCEMCEMCEMCEMCEMCEMCEMC
Repeatability
At 5% load, typical value± mg0.080.080.080.080.50.50.50.50.55555555050505050
At approx. maximum load, typical value ± mg0.10.10.10.1111111010101010101001001005050
Typical value± mg0.060.060.060.060.60.60.60.60.66666666060606060
Sensitivity drift between +10° C and +30° C ± ppm/K 11111.5222222222244422
Tare maximum capacity (subtractive)<100% of maximum capacity<100% of maximum capacity
External calibrated test weightg200200100501,0005002002002005,0002,0002,0002,0001,00050010,00010,0005,0005,0002,000
Accuracy class in accordance with
E2E2E2E2E2F1F1F1F1F1F1F1F1F1F2F2F2F2F2F2
OIML R111-1
Weighing pan sizemmØ 90Ø 90Ø 90Ø 90Ø 120Ø 120Ø 120Ø 120Ø 120182 x 182182 x 182182 x 182182 x 182182 x 182182 x 182182 x 182182 x 182182 x 182182 x 182182 x 182
Weighing chamber height*mm240240240240240240240240240----------Net weight, approx.kg6.206.206.206.206.306.306.306.306.306.206.206.206.206.206.206.206.206.206.206.20
Gross weight, approx.kg8.008.008.008.008.108.108.108.108.107.007.007.007.007.007.007.007.007.007.007.00
* upper edge of the weighing pan to the lower edge of the upper draft shield panel
1 Country-specific marking in model:
x = S: Standard balances without country-specific additions
x = SAR: Standard balances with country-specific additions for Argentina
x = SJP: Standard balances with country-specific additions for Japan
x = SKR: Standard balances with country-specific additions for South Korea
x = CCN: Balances with approval for China
x = CEU: Conformity-assessed balances with EU type examination
certificate without country-specific additions
x = CFR: Conformity-assessed balances with EU type examination
certificate only for France
x = OBR: Balances with approval for Brazil
x = OIN: Balances with approval for India
x = OJP: Balances with approval for Japan
x = ORU: Balances with approval for Russia
45Entris® II Advanced Line
Models without Internal Adjustment Feature, without Approval
At 5% load, typical value± mg0.080.080.080.50.50.50.55555555050505050
At approx. maximum load, typical value ± mg0.10.10.11111101010101010100100100100100
Typical value± mg0.060.060.060.60.60.60.66666666060100100100
Sensitivity drift between +10° C and +30° C ± ppm/K 11122222223.53.53.544777
Tare maximum capacity (subtractive)<100% of maximum capacity<100% of maximum capacity
External calibrated test weightg200100505002002002005,0002,0002,0002,0001,00050010,00010,0005,0005,0002,000
Accuracy class in accordance with
E2E2E2F1F1F1F1F1F1F1F1F1F2F2F2F2F2F2
OIML R111-1
Weighing pan sizemmØ 90Ø 90Ø 90Ø 120Ø 120Ø 120Ø 120182 x 182182 x 182182 x 182182 x 182182 x 182182 x 182182 x 182182 x 182182 x 182182 x 182182 x 182
Weighing chamber height*mm240240240240240240240----------Net weight, approx.kg5.905.905.905.905.905.905.904.604.604.604.304.304.304.604.604.304.304.30
Gross weight, approx.kg7.7 07. 707.707. 707.707.707. 705.105.105.105.105.105.105.105.105.105.105.10
* upper edge of the weighing pan to the lower edge of the upper draft shield panel
1 Country-specific marking in model:
x = S: Standard balances without country-specific additions
x = SAR: Standard balances with country-specific additions for Argentina
x = SJP: Standard balances with country-specific additions for Japan
x = SKR: Standard balances with country-specific additions for South Korea
67Entris® II Advanced Line
Technical Drawings
Models with a readability of 0.1 mg
All dimensions are given in millimeters
usable height: 240 mm
12 ±1
±2
345
Models with a readability of 1 mg
All dimensions are given in millimeters
usable height: 240 mm
12
±2
345
Models with a readability of ≥ 10 mg
All dimensions are given in millimeters
±2
254
±2
317
±5
94
+2
19
253
317 ±2
±2
20
+2
253 ±2
317 ±2
20
+2
219 ±1
182 ±1
182 ±1
±1
90
219 ±1
188 ±1
219
120
188 ±1
89Entris® II Advanced Line
Accessories
These tables contain an excerpt of the accessories that can be ordered. For information on other products, contact Sartorius.
Balance Accessories
ItemQuantityOrder number
Display protection film (set of 5)1YDC10
Dust cover for balances with an analytical draft shield16960BC01
Dust cover for balances with rectangular weighing pan1YDC30
In-use cover (set of 5)1YIC01
Density determination set for solids and liquids for balances with a readability of 0.1 mg |1 mg1YDK03
“Kensington Lock” anti-theft device1YKL01
Pedal button | foot switch1YFS03
Second display | remote display1YSD01
Below-balance weighing (not for models in legal metrology)
Hook M5169EA0039
Weighing table
Made from wood with natural stone1YWT09
Made from natural stone, with vibration dampening1YWT03
Wall console made from natural stone1YWT04
Specifications subject to change without notice.
Copyright Sartorius Lab Instruments GmbH & Co. KG.
Printed in the EU or US on paper bleached without chlorine.
Version 1: 05 | 2020
USA
Sartorius Corporation
565 Johnson Avenue
Bohemia, NY 11716
Phone +1 631 254 4249
Toll-free +1 800 635 2906
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.