Page 1
www.saro.de
Instruction Manual Wok-Induction Cooking Plate
Model LOUISA
Order No. 360-3000
General notes
• Carefully read these instruction manual through as they contain important information.
• It is advisable to keep the instruction manual in a place where you have them always
ready to hand. Should you pass the induction cooker on to a third party, this instruction
manual must be handed on.
• As soon as you have unpacked the induction cooker, check whether everything is in a
faultless condition. Should anything be damaged, do not connect the appliance as such,
but inform your dealer.
• The induction cooker must only be used for the intended purpose. Improper use can
cause damages and lead to the loss of the warranty.
• Before you connect the induction cooker, make sure that the type of current stated on the
identification plate corresponds with your mains supply.
• In case of fault and/or malfunction, pull the plug out of the socket and inform your dealer.
He will carry out the repair with original spare parts.
•
Please observe the local regulations concerning accident prevention and disposal.
•
The manufacturer/dealer cannot be made responsible for damages which arise through
not observing these operating instructions. Apart from this, if these instructions are not
observed, induction cooking plate safety is no longer guaranteed.
Safety notes
1. Do not touch the cooker and the plug with wet hands.
2. Do not plug into a socket where several other appliances are plugged in.
3. Do not pull the plug out of the socket by the cable.
4. The cable must not hang over table edges and/or sharp edges. It also must not come into
contact with the hot appliance surface or with water.
5. Check regularly the cable. If it is damaged, it must be exchanged by a qualified specialist.
6. Place the induction cooker on a stable and level surface (never on a flammable surface,
e.g. carpet, table cloth etc.). Keep a minimum distance of 10 cm to walls or other items.
7. Do not put the induction cooker near to gas or electric ovens and/or other sources of
warmth. Take care that no curtains or other flammable materials come into contact with
the induction cooker when it is in use.
8. Do not place the induction cooker next to devices or objects, which react sensitively to
magnetic fields (e.g. radios, TV, cassette recorders, etc.)
9. Do not leave the cooker unattended while it is in use. Children are not able to realise
dangers when handling electronic appliances.
10. Do not place any metal objects on the induction cooker.
11. Do not place an empty wok on the induction cooker.
12. Do not move the induction cooker while cooking.
13. Do not touch the hot surface of the glass field.
14. Do not use the cooker outdoors and unplug when not in use.
15. Before cleaning, allow the cooker to cool down and pull the plug out of the socket.
16. Do not operate the induction cooker if it has been damaged in any manner. Disconnect
the cooker from the power supply immediately and contact the customer service.
17. Repairs may only be undertaken by a qualified specialist using original spare parts.
Page 1
Page 2
Instruction Manual WOK-Induction Cooking Plate Model LOUISA
Operating
1. Put the plug into the plug socket. The net control light lights up. This indicates that the
cooker is connected with electricity mains.
2. Place suitable cooking utensils in the center of the top plate. Do not place the wok
without food on the cooker.
3. Switch on the cooker by pressing the ON/OFF button. The control light (POWER) lights
up.
4. Press the function button. The control light (POWER) continues shining. The cooker will
heat at the level 5. Set the cooker at the desired power by directly pressing to adjust the
power from 1 to 10 or 10 to 1.
5. Press the function button to select POWER, TEMP and TIMER as follows.
POWER: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
TEMP: 60°C, 80°C, 100°C, 120°C, 140°C, 160°C, 180°C , 200°C, 220°C, 240°C
TIMER: 0, 5, 10, 10, ……..180; 5 minutes per interval.
6. The appliance is equipped with an overheat protection. If the wok is getting too hot, the
appliance will switch off power, a buzzer sounds and on the display occurs “E02”. Should
this happen, wait for some minutes and cool the appliance down. After that, the appliance
works without problems.
If meat or vegetables should be roasted, please use the temperature function to avoid
any over heating.
Cleaning
• Clean after each use.
• Allow the cooker to cool down.
• Switch off the device and disconnect the power plug from the socket.
• Wipe off the glass field with a damp cloth or use a mild, non-abrasive soap solution.
• Make sure that the bottom of the cookware does not scrape across the surface.
• Do not use benzine, thinner, scrubbing brush or polishing powder to clean the cooker.
Technical data
Model LOUISA
Connection 230V / 50Hz / 1 Ph. / 3,5 kW
Adjustable heating level 1 - 10
Temperature range 60° - 240° C (heating level 1 - 10)
Timer 0 – 180 min.
Overheating protection
Dimensions W 340 x D 445 x H 115 mm
Weight net 7,5 kg
Error Code Proable Cause
E01 Over heat of IGBT or damage of thermal resistor
E02 Damage of temperature sensor or protection of dry boiling
E03 Protection of over-low or over-high voltage, or impact current.
Please read carefully and keep it in a safe place near the induction cooker
. Page 2
Loading...