SAFETY:
While Sarlo Power Mowers, Inc. is dedicated to
building dependable, high-performance turf equipment,
our number one concern is SAFETY.
Users must carefully read this Owner’s Manual before
operating the machine. Never permit anyone to operate
the mower without a thorough understanding of the
controls and operation of the equipment.
The improper or irresponsible use of mowing equipment
can cause serious injury and even death. Owners and
users can prevent accidents or injuries to themselves,
other people and/or to property. Use common sense.
BEFORE YOU MOW:
Wear appropriate clothing and sturdy shoes or boots. Do
NOT operate the mower when barefoot or in open-toed
sandals. Long hair, loose-fitting clothing and jewelry may
get caught and tangled in moving parts, causing serious
injury or death.
Wear safety glasses and use hearing protection during
operation. Do NOT listen to music or wear headphones
while operating the mower.
Inspect the area where the mower will be used. Evaluate
the terrain, paying special attention to slopes, water
hazards, drop-offs, ditches and embankments. Pay
attention to hazards, obstructions, holes, ruts and bumps.
Tall grass often hides dangerous obstacles. Look for
items such as rocks, sticks, wire or toys. When struck by
rapidly rotating blades, foreign objects become extremely
dangerous projectiles, thrown from the mower at high
speeds.
NEVER carry passengers, transport equipment or carry
fuel on the mower. Avoid mowing and shut the mower
down when bystanders or pets are present. Always be
aware of the direction of the mower’s discharge. Rapidly
turning blades and thrown objects present a danger to
operators, people and property nearby.
Check the machine each time before starting. Inspect the
tire pressure, fluid levels and the air filter. Service the
engine according to the separate instructions supplied by
the engine manufacturer. Always disconnect the spark
plug wire when inspecting or servicing the mower. Look
for any signs of damage or wear to the mower. Remove
excess dirt or debris before operation. Inspect the cutting
blades, making sure they are sharp and undamaged.
Check for the presence and tightness of all bolts, nuts,
pins and screws. Tighten or replace missing items.
TEST the Safety Interlock System, also known as the
Operator Presence Controls before each use to ensure
that the mower’s safety features are functioning properly.
KNOW BEFORE YOU MOW.
FUELING:
Always allow the engine to cool before fueling or
refueling. Never operate a gas engine inside an enclosed
area. Take special care when handling fuel. It is
extremely flammable and the vapors are explosive.
Use only approved fuel containers and do not smoke.
Never refuel or drain the machine indoors or inside an
enclosed trailer. Don’t open the gas cap or fill with the
Fig. 2
engine running.
SAFETY ALERT SYMBOLS:
Your Sarlo mower is equipped with Safety Alert Symbols
designed to remind and warn operators of specific safety
concerns.
Familiarize yourself with the location and intent of each
safety symbol and use extreme caution when in proximity
to these areas of concern.
You will find safety warnings and basic operating instructions at the mower controls adjacent to the throttle and
choke adjustment levers. (Fig. 2)
Failure to follow these safety precautions and operating
instructions may result in damage to the machine and/or
serious injury to operators and others.
Cutting deck edges are identified by DANGER symbols on
each side of the deck. (Fig. 3) Keep hands, feet and any
dangling or loose clothing away from the underside of the
deck.
The rotary cutting blades turn at approximately 18,500 fps;
contact with the spinning blades will cause serious injury or
death.
NEVER operate the mower with the Side-Discharge
Deflector Shield in the raised position without the grass
catcher, or if the deflector has been damaged or removed.
Debris may be thrown from the turning blades, causing
serious injury or property damage. (Fig. 4)
Only operate the mower with the Side-Discharge deflector
or the grass catcher attachment mounted and securely in
place.
BigMo™ Owner’s Manual Page 3
Fig. 3