Sargent and Greenleaf 8000011002 Users Manual

MODEL 8000-011-002
External Reader/Writer
RFID Board

OEM
Operating/Installation
Instructions

Sargent and Greenleaf Page 1 630-781

-8000-011-002 External RFID Reader/Writer Installation/Operating Instructions-

Features:

- ISO 15693, 18000-3, Tag-it™ HF-I Compatible

- Read up to 4 Tags Simultaneously

- 13.56MHz Reader/Writer

- Integrated antenna with up to 3 inch read range

- USB 2.0 powered

- Windows XP™, Linux™ compatible

- Dimensions: 1.5” x 5.75 “

1.0
The Sargent and Greenleaf external RFID reader/writer (part number 8000-011-002) is

a multi tag RFID reader/writer that can be easily integrated into any security/tracking
system.

Product Introduction

2.0 Product Installation Requirements

- 1 available USB port for every board

- Silicon labs USB to UART driver

3.0 Product Installation

Simply plug the external reader/writer into an available USB 2.0 port on a PC or laptop.
The 2 red LEDs (D1 and D2) will flash on and off during the startup routine.

Once this process is completed the board will go into a standalone operating mode for
manufacturing diagnostics. Please reference table 1.1 to determine the state of reed
switch and the RFID antenna.

Red LED D1 Red LED D2
Blinking – System is in start up Blinking – System is in startup
Flashing – RFID tag is present On – Board has power
Off – RFID tag is not present Off – No power

4.0 Application Development

To integrate this RFID reader/writer into a new or existing system please contact your
sales representative from Sargent and Greenleaf for pricing of the development kit
which will include an interface control document.

5.0 Notes to the Customer

Sargent and Greenleaf Page 2 630-781

-8000-011-002 External RFID Reader/Writer Installation/Operating Instructions-