Sargent and Greenleaf 8000011001 User Manual

MODEL 8000-011-001
RFID Cash Deposit
Board

OEM
Operating/Installation
Instructions

Sargent and Greenleaf Page 1 630-780

-8000-011-001 Cash Deposit Board OEM Installation/Operating Instructions-

Features:

- ISO 15693, 18000-3, Tag-it™ HF-I Compatible

- Read up to 10 Tags Simultaneously

- 13.56MHz Reader/Writer

- Trace antenna with up to 3 inch read range

- USB 2.0 powered

- Windows XP™, Linux™ compatible

- Dimensions: 5.5” x .13.25 “

- Manage the following on-board devices

o 1 green LED
o 1 red LED
o 1 magnetic reed switch

- Manage the following optional accessories

o 1 5v solenoid
o 1 Sargent and Greenleaf High Security Lock

1.0
The Sargent and Greenleaf Cash Deposit Board (part number 8000-011-001) is a multi-

tag RFID reader/writer and general purpose I/O controller.

Product Introduction

2.0 Product Installation Requirements

- 1 available USB port for every board

- Silicon labs USB to UART driver

3.0 Product Installation

Simply plug the cash deposit board into an available USB 2.0 port on a PC or laptop.
The green and red LEDs will flash on and off for 5 cycles verifying that the onboard
micro is booting up.

Once this process is completed the board will go into a standalone operating mode for
manufacturing diagnostics. Please reference table 1.1 to determine the state of reed
switch and the RFID antenna.

Red LED Green LED
Blinking – System is in start up Blinking – System is in startup
On – Magnet is not present Flashing – RFID tag is present
Off – Magnet is present Off – RFID tag is not present

Sargent and Greenleaf Page 2 630-780

-8000-011-001 Cash Deposit Board OEM Installation/Operating Instructions-