SAREL ClimaSys User Manual
ClimaSys
Thermostat with NO contact
CONTROL DEVICES
Load
Load = resistance
■ Thermostat with NO
contact used for switching off the resistance
heater when the temperature rises above the
set value.
■ It also increases service
life of resistance heaters, since they are
switched less frequently.
■ DIN rail fi xing.
■ Degree of protection
IP 30.
■ V0 self-extinguishing
thermoplastic as per
UL94.
■ Adjustable temperature
from 0 to 60 ºC.
■ Connection: 2 x 2.5 mm
terminals.
Reference Display Max. rated current
87561
87578
Technical characteristics
Sensor element
Contact type
Contact resistance
Service life
Max. switching
capacity
°C 10 A to 250 V
°F 10 A to 250 V
bimetal
snap-action contact
< 10 mΩ
> 100,000 cycles
AC 250 V 10 A (resistive load)
AC 120 V 15 A (resistive load)
AC 250 V/120 V 2 A (inductive load cos φ = 0.6)
DC 30 W
Connection
2
Mounting
Material
Dimensions
Weight
Fitting position
Working temperature
Protection type
Hysteresis
Regulation
two-pole terminal for 2.5 m
clip for 35 mm DIN rail (EN 50022)
V0 thermoplastic UL94, light grey
60 x 33 x 43 mm
40 g
variable
–20...+80 °C (–4...+176 °F)
IP 20
7 °K
0°...+60 °C
2
Thermostat with NC contact
Load
Load = fan
■ No closing thermostat,
used to start the fan
when the temperature
rises above the maximum value.
■ As a result, service life of
the fan is increased and
its fi lter stays cleaner.
■ DIN rail fi xing.
■ Degree of protection
IP 30.
■ V0 self-extinguishing
thermoplastic as per
UL94.
■ Adjustable temperature
from 0 to 60 ºC.
■ Connection: 2 x 2.5 mm
terminals.
Reference Display Max. rated current
87562
87580
Technical characteristics
Sensor element
Contact type
Contact resistance
Service life
Max. switching
capacity
2
Connection
Mounting
Material
Dimensions
Weight
Fitting position
Working temperature
Protection type
Hysteresis
Regulation
°C 10 A to 250 V
°F 10 A to 250 V
bimetal
snap-action contact
< 10 mΩ
> 100,000 cycles
AC 250 V 10 A (resistive load)
AC 120 V 15 A (resistive load)
AC 250 V/120 V 2 A (inductive load cos φ = 0,6)
DC 30 W
two-pole terminal for 2.5 m
2
clip for 35 mm DIN rail (EN 50022)
V0 thermoplastic UL94, light grey
60 x 33 x 43 mm
40 g
variable
–20...+80 °C (–4...+176 °F)
IP 20
7 °K
0...+60 °C
110
ClimaSys
Fix thermostat with NC contact
CONTROL DEVICES
Load
Load = resistance
■ Thermostat with NC
contact used for switching off the resistance
heater when the temperature rises above the set
value. It also increases
service life of resistance
heaters, since they are
switched less frequently.
■ DIN rail fi xing.
■ Degree of protection
IP 30.
■ V0 self-extinguishing
thermoplastic as per
UL94.
■ Factory-adjusted tem-
perature.
■ Connection: 2 x 2.5 mm
terminals.
Reference Factory –adjusted
87565
87566
87567
Caractéristiques techniques
2
Sensor element
Contact type
Contact resistance
Service life
Max. switching
capacity
bimetal
snap-action contact
< 10 mΩ
> 100,000 cycles
AC 250 V 10 A (resistive load)
AC 120 V 15 A (resistive load)
AC 250 V/120 V 2 A (inductive load cos φ = 0,6)
DC 30 W
Connection
Mounting
Material
Dimensions
Weight
Fitting position
Working temperature
Protection type
Hysteresis
2-pole terminal for 2.5 mm
clip for 35 mm DIN rail (EN 50022)
V0 thermoplastic UL94, light grey
60 x 33 x 43 mm
40 g
variable
–20...+80 °C (–4...+176 °F)
IP 20
7 °K
temperature
5 °C /41 °F
10 °C /50 °F
15 °C /59 °F
Max. rated
current
10 A to 250 VAC
15 A to 120 AC
DC 30 W
2
Fix thermostat with NO contact
Load
Load = fan
■ No closing thermostat,
used to start the fan.
■ Degree of protection
IP 30.
■ V0 self-extinguishing
thermoplastic as per
UL94.
■ Factory-adjusted tem-
perature.
■ Connection: 2 x 2.5 mm
terminals.
■ DIN rail fi xing.
Reference Factory –adjusted
87568
87569
87570
Caractéristiques techniques
2
Sensor element
Contact type
Contact resistance :
Service life
Max. switching
capacity
bimetal
snap-action contact
< 10 mΩ
> 100,000 cycles
AC 250 V 10 A (resistive load)
AC 120 V 15 A (resistive load)
AC 250 V/120 V 2 A (inductive load cos φ = 0,6)
DC 30 W
Connection
Mounting
Material
Dimensions
Weight
Fitting position
Working
temperature
Protection type
Hysteresis
2-pole terminal for 2.5 mm
clip for 35 mm DIN rail (EN 50022)
V0 thermoplastic UL94, light grey
60 x 33 x 43 mm
40 g
variable
–20...+80 °C (–4...+176 °F)
IP 20
7 °K
temperature
25 °C /77 °F
30 °C /86 °F
35 °C /95 °F
Max. rated current
10 A to 250 VAC
15 A to 120 AC
DC 30 W
2
112
Loading...