Saramonic UwMic15 User Manual
UHF Wireless
Microphone System
UwMic15
User Manual
Statement
Please read this manual carefully before using and strictly
operate and store in accordance with the instructions. Please
save it for your future reference.
If the user manual can not help you to solve certain problems,
please ask your retailer for help or email us: info@saramonic.
com.
Cautions
1. Do not use the unit under water, don't expose it to rain.
Please store it in a cool, dry place.
2. Please use and store it in normal temperature. Do not
move it from overheated to supercooled condition
frequently as well as keep away from heat sources such
as heater and oven.
3. When using and storing, please pay attention to dust
and moisture.
4. Be careful to violent collision.
5. To avoid acoustical feed-back, do not hold the
microphone close to the loudspeakers.
6. For the best sound pick-up pattern do not hold your
hand against the microphone head.
7. Remove the batteries from the battery compartment
when the device is not used for a long time.
1
Contents
General Introduction ................................................................2
Portable Receiver UwMic15-RX15 ..........................................2
Introduction ............................................................................... 2
Product Structure ......................................................................2
Attaching Accessories .............................................................. 4
LCD Display Operation Guide ................................................5
Body-pack Transmitter UwMic15-TX15 ..................................6
Introduction ............................................................................... 6
Product Structure ......................................................................7
Antenna ......................................................................................7
Attaching Accessories .............................................................. 8
LCD Display Operation Guide ................................................9
Hand-held Microphone UwMic15-SR-HM15 .......................11
Introduction .............................................................................11
Product Structure ....................................................................11
Setup Guide ............................................................................12
Plug-on Transmitter UwMic15-SR-XLR15 .............................13
Introduction .............................................................................13
Product Structure ....................................................................13
Attaching Accessories ............................................................15
LCD Display Operation Guide ..............................................16
Operation Guide .....................................................................18
Specification ............................................................................21
Transmitter TX15, SR-HM15, SR-XLR15 ................................21
Receiver RX15 .........................................................................22
Packing List ..............................................................................23
2
General Introduction
The Saramonic UwMic15 UHF wireless microphone system
is intended for portable wireless operation and can be used
in several environments for applications such as DSLR video,
field recording, broadcast TV, electronic news gathering
(ENG), on-the-spot interviews, and more.
Portable Receiver UwMic15-RX15
Introduction
The Saramonic UwMic15-RX15 is a camera-mountable
integrated wireless receiver. It features a wide switching
RF bandwidth, an easy-to-read LCD display and infrared
synchronization between transmitter and receiver.
Product Structure
①
②
⑤
⑦
③
④
⑥
⑧
⑩⑨
⑪
①
Antennas
②
POWER button
Long press to turn on or off the RX15.
③
SET button
Long press the SET button to enter the displayed menu.
Then, short press the SET button to confirm your option or
long press again to exit without saving.
3
④
+ or - button
Selects functions or values shown on the display.
⑤
POWER indicator
Indicates the battery level as follows:
Green light: Sufficient battery level.
Red light: Low battery level.
⑥
RF indicator and infrared transmitter port
The infrared transmitter port sends the set frequency to a
transmitter.
RF indicator displays the RF input level as follows:
Green light: RF signal is strong.
Red light: RF signal is weak or disconnected.
⑦
LCD display
Display menus, please refer to "LCD Display Operation
Guide" (page 5) for more details.
⑧
Battery compartment
Operates on two AA batteries (not included).
⑨
PHONE jack
Connect a headphone to monitor the audio output.
⑩
OUTPUT jack
Connect the RX15 to a video camera, camcorder, mixer
or amplifier with the supplied output cable.
⑪
Standard cold shoe
4
Attaching Accessories
1
Connect the supplied cable to the output jack.
①
Plug the supplied cable into
the OUTPUT jack.
②
For a secure connection, turn
to lock the connector.
2
Attach a belt clip. Please Refer to "Attaching Accessories"
(page 8).
3
Attach the shoe mount adapter.
①
Please attach the belt
clip upside-down before
attaching the shoe mount
adapter.
②
Push the bottom of the
belt clip to make some
space between the belt
clip and the receiver.
③
Align the belt clip with the
two vertical grooves on
the shoe mount adapter
and insert the adapter in
the direction of the arrow.
④
Push the shoe mount
adapter in fully until the belt
clip fits into the horizontal
groove on the adapter holds.
①
②
①
③
②
5
LCD Display Operation Guide
②
③
①
1
Home screen
If no operation is performed for 20 seconds on the other
screens, the display will automatically return to the home
screen.
①
Volume indicator
②
Battery level indicator
Displays the battery level. Please replace both batteries
immediately when the indicator starts flashing.
③
Channel and frequency
Indicate the current channel and frequency.
2
Set output volume
Set the volume of output audio within the range 0 to 30. The
setting is retained even after the power is turned off. Default
is 27.
3
Power key
Long press the SET button to unlocked or locked the power
key. Lock the power key to prevent the receiver being turned
off unwittingly while using.
Unlocked: Long press the power key to turn the receiver on or
off (System default).
Locked: The receiver will not be turned off even after pressing
the power key.
Note: If the batteries are removed and reinserted while
the power key is set to Locked, the lock state of the power
key will not be changed. You can turn on the receiver by
long pressing the power button.
6
4
Infrared matching function
Match the receiver and transmitter via infrared. Details of
operation, please refer to "Match the channel of receiver and
transmitter" (page 11).
5
Set backlight
Set the backgroud LED light to ON or Delay 60 /30 /10
seconds or OFF. Default is "Delay 10s."
6
Restore settings
Confirm it then the parameters of RX15 are restored to their
factory default settings.
7
Version of the UwMic-RX15
8
Serial Number
Body-pack Transmitter UwMic15-TX15
Introduction
This transmitter is a compact transmitter that employs a
crystal-controlled PLL synthesizer. It is equipped with a
muting function and a locking-type microphone input
connector.
7
Product Structure
⑨
①
②
⑤
⑦
③
④
⑥
⑧
Antenna
①
POWER indicator
Indicates the battery level as follows:
Solid Green: Sufficient battery level.
Solid Red: Battery is getting low.
②
AUDIO indicator / IR (infrared detector)
AUDIO indicator: Indicates the audio input.
IR (infrared detector): Gets the frequency from the receiver.
Solid Green: Audio input level is appropriate.
Flashing Red: Audio is muted (i.e., disabled).
For details on setting the mute function, please refer to
"Set Mute key" (page 10).
③
Audio input connector (Locking type)
Connect to the supplied lavalier microphone.
⑤
LCD display
Display menus, please refer to "LCD Display Operation
Guide" (page 9) for more details.
Loading...