Saramonic SR-AX104 User Manual
The SARAMONIC SR-AX104 is a 2-channel XLR audio
adapter with preamplifiers and phantom power, ideal for
any DSLR cameras with a built-in microphone jack.
User Manual
SR-AX104
COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL
A brand of DSQN
Web: www.saramonic.com
Email: info@saramonic.com
1 PRODUCT INTRODUCTION
1.1 General Introductions
The SARAMONIC SR-AX104 is a 2-channel XLR audio adapter with preamplifiers and phantom
power, ideal for any DSLR cameras with a built-in microphone jack. Wide-variety of audio devices
like professional condenser microphones, wireless microphones, external audio mixers, sound
boards and more can be connected to the camera via this adapter.
The SR-AX104 makes your recording work much easier. Level meter allows you to verify the proper
input levels in real time, the output signal can be adjusted by the level controls for optimum
recording. The phone jack lets you monitor the audio from the adapter during recording, or from
camera during playback. The AGC disable feature reduces noise during quiet moments of recording.
Statement
Please read this manual carefully before using and strictly operate and store in
accordance with the instructions. Please save it for your future reference. If the
user manual can not help you to solve certain problems, please ask your retailer
for help or email us: info@saramonic.com.
Cautions
1. Do not use the unit under water, don't expose it to rain. Please store it in a
cool, dry place.
2. Please use and store it in normal temperature. Do not move it from overheated
to supercooled condition frequently as well as keep away from heat sources
such as heater and oven.
3. When using and storing, please pay attention to dust and moisture.
4. Be careful to violent collision.
1
2
3
XLR Inputs
Two balanced XLR inputs
Monitor In
Monitor input jacks for connecting the AV cable
Battery Compartment
Operates on one 9 volt battery (not included).
You could use an alkaline or lithium type battery for the longest operating type.
The adapter can also operate without a battery for limited functions
1 1
2
3
4
5
6
7
Level Meter
Indicates the sound level in dB for each channel
Gain Switches
Selects LOW for unity gain or HIGH for +20dB boost
Peak Switches
Turn on/off the LED signal indicators which flash red for overload
AGC ON/OFF
Turn the AGC switch to ON to active camera AGC function
Turn the AGC switch to OFF to disable camera AGC function
Note: The AGC ON/OFF is only applied to cameras with built-in AGC function.
1.2 Product Structure
5
7
4
6
2
Loading...