Sapporo SP-95 Instruction Manual

INSTRUCTIONS FOR USE AND INSTALLATION OF MODEL SP-95

HOW TO USE THE IRON

1. HANG BOTTLE 1 METER ABOVE PRESSING SURFACE.
(SEE BOTTLE HANGING INSTRUCTION.)

2. CONNECT THE BLACK HOSE END TO THE IRON, AND
CLEAR HOSE END TO THE BOTTLE.

3. EMPTY DEMINERALIZER PACKAGE INTO THE BOTTLE
AND FILL IT WITH TAP WATER ONLY. (IF YOU WANT TO,
USE THE DEMINERALIZER AS AN OPTION.)

4. TIE THE ELECTRICAL CORD AND HOSE TOGETHER.

5. PLUG THE IRON CORD INTO A GROUNDED
ELECTRICAL OUTLET.

6. SET THE TEMPERATURE DIAL ON NO. 4 AND LET THE
IRON HEAT UP FOR TEN MINUTES.

7. OPEN THE BOTTLE VALVE AND ALLOW THE HOSE TO
FILL WITH WATER BY PRESSING THE STEAM SWITCH.
THE IRON IS NOW READY FOR USE.

8. WHEN NOT PRESSING, PLACE THE IRON ON THE
SUPPLIED IRON REST.

9. ALWAYS UNPLUG THE IRON WHEN UNATTENDED OR
NOT IN USE.

DO NOT STAND IRON ON ITS BACK.

DEMINERALIZER

(AVAILABLE AS AN OPTION)

WATER BOTTLE

BOTTLE VALVE
CLOSE TO FILL

OPEN TO USE

FILTER

SILICONE HOSE

IMPORTANT NOTICE
ABOUT DEMINERALIZER:

• THE DEMINERALIZER EXTENDS THE LIFE OF THE
IRON & PREVENTS CALCIUM BUILD-UP.

• WHEN THE DEMINERALIZER CHANGES FROM BLUE
TO BROWN, REPLACE IT BY ORDERING A NEW
PACKAGE FROM YOUR DISTRIBUTOR.

1 METER

GROUNDED TYPE

ELECTRIC PLUG

TIE CORD AND

HOSE TOGETHER

THERMOSTAT

SET AT NO. 4

IRON REST

6100

PARTS LIST FOR MODEL SP-95

1617

8000 9000

4000

5000

6000

14150

10000

16000

3000

Sapporo No. Name Style No.

SRP270

SRP271

SRP273

SRP398

SRP274

SRP354

SRP397

SRP277

SRP355

SRP269

SRP356

SRP357

SRP306

SRP358

Cover

Rubber Handle Set Complete

Main Switch Assembly-NS

On / Off Switch

Thermo Shield

Thermo Shield Screw

Handle Cap Set

Solenoid Valve Assembly (120 V)

Thermostat Assembly

Cord Set

Cover Hardware

Water Bottle Complete

Red Filter for Hose

Silicone Hose Set with Filter

5200

3000

4000

5000

5200

6000

6100

1617

8000

9000

10000

14150

16000

16018

17000

17000 16018