Sapphire ATI RADEON 9600 User Manual

Getting Started

Graphics Card

U

SER

M

ANUAL

TM

Table of Contents
English

Installing Your VGA Card ............................................................................................

Driver Installation .........................................................................................................

Using TV Out ...............................................................................................................

Using The Online Manual ............................................................................................

Troubleshooting Tips ...................................................................................................

Copyright

This manual is copyrighted with all rights reserved. No portion of this manual may be copied or reproduced by any
means.
While every precaution has been taken in the preparation of this manual, no responsibility for errors or omissions is
assumed. Neither is any liability assumed for damages resulting from the use of the information contained herein.

Trademarks

ATI is a registered trademark of ATI Technologies Inc. in Canada, the United States and/or other countries. Windows
and Microsoft are registered trademark of Microsoft Corporation in the United States and/or other countries. All other
trademarks and/or registered trademarks are the properties of their respective owners.

1
2
4
8
8

Installing Your VGA Card

Preparing Your Computer

Before installing your VGA Card we recommend that you first uninstall the driver for your
current video card and reconfigure your operating system to use the standard display
driver (VGA) supplied with your operating system. For more information about changing
to the VGA driver, see your operating system documentation.

READ ME FIRST

Turn off the power to your system and discharge your body’s static

charge by touching a grounded surface—for example, the metal surface

electric

of the power supply—before performing any hardware procedure.

The manufacturer assumes no liability for any damage, caused directly or

ly, by improper installation of any components by unauthorized service

indirect

personnel.

Damage to system components, the accelerator card, and injury to yourself

Now that you have prepared your computer, you are ready to install your VGA Card.

To Install Your VGA Card

If you do not feel comfortable performing the installation,

consult a qualified computer technician.

result if power is applied during installation.

may

Power off the computer and monitor, then
disconnect the display cable from the back
of your computer.

1

Display Cable

Video Output
Connecto

r

Power Supply

Remove the computer cover.
If necessary, consult your computer’s
manual for help in removing the cover.

(Remember to discharge your body’s

electricity by touching the metal

static

of the computer chassis.)

surface

Installing Your VGA Card