Sapido SH206 Plus User Manual

1

SH206+

User Manual

V2.3.X iOS System

Smart Home System

Security + Power Saving Solution

Product Introduction:

SH206+ is a Security plus Power Saving Solution with Sapido APP. There are five different

scenarios to make your system more ease to use. Use your iPhone/iPad to long-end control your

home wherever you are. Better secure with IP Camera and Security Alarm. Manage your electronic

appliances and do the power saving. Let Sapido do more for you, make your life easier and smarter.

2

Catalogue

1.Hardware Instruction and Introduction ...................................................................................... 5

1.1 LED guide-light indicator .................................................................................................. 5

1.2Hardware Instruction ........................................................................................................ 10

1.3Hardware Installation ........................................................................................................ 15

2.APP Download and Network Setup (iOS system) ...................................................................... 20

3. All-Link Button Application ........................................................................................................ 25

3.1 Hardware Wireless Connect Automatically Instruction– ....................................... 25

3.2 Internet Settings(PPPoE) .................................................................................................. 30

4.Scenario– .............................................................................................................................. 32

4.1Home Mode .......................................................................................................................... 32

4.2Away Mode .......................................................................................................................... 33

4.3Sleep Mode ........................................................................................................................... 33

4.4Custom Mode....................................................................................................................... 34

4.5Change Mode ....................................................................................................................... 35

5.Event Notification ......................................................................................................................... 36

6.Arm/Disarmed/Panic .................................................................................................................... 37

7.Application of IP Camera ............................................................................................................ 38

7.1 Real-Time Screenshot and Browse ................................................................................... 38

7.2 Surveillance Recording and Browse ................................................................................. 39

7.3 Personalized Recording Schedule ..................................................................................... 42

8. Smart Switch Application ............................................................................................................ 44

8.1 Smart Switch Application .................................................................................................. 44

8.2 Set up Schedule of Power On/Off ..................................................................................... 45

8.3 Electricity Statistics............................................................................................................ 47

9.Advanced Function ...................................................................................................................... 49

9.1IOT Account Management ................................................................................................ 50

9.2How to add Family Users to the system ........................................................................... 52

(1)Advice: When the family user’s handheld device is around the same place ......... 52

(2)When the family user’s handheld device is not around the same place ................ 54

9.3Instruction of Scenario Settings ........................................................................................ 56

9.3.1Activation Delay Setting of Scenario’s Smart Switch .......................................... 56

9.3.2Activation Delay & Action Time of Scenario’s Security ...................................... 57

9.3.3Activation Delay & Working Time of Scenario’s Camera .................................. 59

9.3.4Activation Delay & Music Player of Scenario’s Online Streaming .................... 60

9.4Security Schedule Setting with Off Mode ........................................................................ 62

9.4.1Door & Window Sensor .......................................................................................... 62

9.4.2Motion Sensor .......................................................................................................... 64

9.5Application of IP Camera .................................................................................................. 66

9.5.1Add the music to USB drive of IP Camera ........................................................... 66

9.5.2Schedule Setup of Music Play ................................................................................ 68

9.5.3Custom Alarm ......................................................................................................... 70

9.5.4Upload 30 sec Record File to Dropbox Automatically ......................................... 73

9.6Smart Switch Application Instruction ................................................................................ 74

9.6.1Cloud Switch APP On/Off and Schedule Set-up ..................................................... 75

9.6.2Switch Repeat Schedule Setting (Examples) ............................................................ 77

9.6.3How to view the electronic history ........................................................................... 79

9.7Application for Media Storage .......................................................................................... 80

9.7.1Upload the files in mobile device to IP Cam USB drive ...................................... 80

3

9.7.2File download from USB drive of IP Cam ............................................................ 83

9.7.3Online Streaming – Play the document in USB of your IP Cam via handheld

device ……………. ........................................................................................................... 86

9.8Network Security ................................................................................................................ 88

9.8.1Network Security – Network security setup and internet device control .......... 88

(1) Client List …………………. .............................................................................. 88

(2)2.4G Wireless Schedule ...................................................................................... 92

(3)5G Wireless Schedule ......................................................................................... 93

(4) Keyword Blocked………. ................................................................................. 95

(5) Website History ………… .................................................................................. 97

(6)Distributed Denial of Service (DDoS) ................................................................ 100

(7) Login History ……… ....................................................................................... 100

9.8.2Download List – How to manage the files of mobile device (iPhone / iPad) ..... 101

(1) Document Browse…. ....................................................................................... 102

(2) Rename………………….. ............................................................................... 106

(3) File Edit ………………… ................................................................................ 107

(4) Offline Browse……………… ......................................................................... 110

9.8.3IOT Network – To review SH206+ and USB device status ............................... 111

9.8.4IOT Device Managent- How to manage security device in system ....................... 115

(1)Update the firmware version ............................................................................. 116

(2)Hide the Device in IOT Device Management ................................................. 117

(3)Delete Device While Off Line .......................................................................... 118

(4) The Function of GUI ......................................................................................... 119

9.9 Q & A ................................................................................................................................. 120

10.Add More Devices in the System ............................................................................................ 126

10.1 Add a new Door & Window Sensor（DDLA0z） ........................................................... 126

10.2 Add a new Motion Sensor（MDKA0z） ........................................................................ 128

10.3 Add a New IP Camera（IPJC2n） .................................................................................. 130

10.4 Add a new Smart Switch（WSG70n） .......................................................................... 133

11.To View All Cameras From Different Accounts At Once ...................................................... 135

4

1. Hardware Instruction and Introduction

1.1 LED guide-light indicator

(1) Home Gateway（ZGA201）

Guide-light

Light Color

Status Instruction

Power

Green

Router Connected Properly

Wireless Status

Orange

2.4G Wi-Fi signal normal

Blue

5G Wi-Fi signal normal

WAN

Green

10/100Mbps Wireless network is connected properly

Orange

10/100/1000Mbps Wireless network is connected
properly

LAN

Green

Wireless network is connected properly

Orange

10/100/1000Mbps Wireless network is connected
properly

WPS Status

Green

Router Connected Properly

Green

Wi-Fi signal extending
Router Resetting

5

(2) Security Alarm（ZAL211）

Guide-light

Light Color

Status Instruction

Power

Green

Alarm in properly

Alarm

Red

Alarm is triggered

Status

Red

Zigbee off line

Orange

Resetting

ZigBee

LED

Green

Steady：Security system working properly

Flashing: Zigbee connecting

6

(3) Cloud Motion Sensor（MDKA0z）and Cloud Door & Window

Sensor（DDLA0z）

Product

Guide-light

Light Color

Status Instruction

DDLA0z

ZigBee

Red

Connecting with ZAL211

Green

Connected with ZAL211 successfully

Orange

Low Battery

MDKA0z

ZigBee

Red

Connecting with ZAL211

Green

Connected with ZAL211 successfully

Orange

Low Battery

7

(4) Smart Cloud Night Vision Camera with Audio Wireless Router

（IPJC2n）

Guide-light

Light
Color

Status Instruction

Power

Green

Camera is working properly

WAN

Green

Wireless network is connected properly

LAN

Green

Wireless network is connected properly

Wireless Status

Green

Wi-Fi signal normal

WPS Status

Orange

Wi-Fi signal extending

Green

Wi-Fi signal extended successfully

8

(5) Smart Cloud Control Insight Switch Wireless Router（WSG70n）

Guide-light

Light Color

Status Instruction

WAN/LAN

Orange

Power on is being applied on the device. After 30
seconds, the LED light will be green.

Green

Wireless network is connected properly

Manual Button

Green

Power ON

No Light

Power OFF

Wireless Status

Green

Wi-Fi signal normal

WPS Status

Orange

Wi-Fi signal extending

Green

Wi-Fi signal extended successfully

9

1.2 Hardware Instruction

(1) Home Gateway（ZGA201）

Button and Port

Function Description

WAN

Connect to xDSL/Fiber, Static IP, Dynamic IP, PPTP, L2TP, Wi-Fi
ISP AP, WiFi-AP

LAN

* Connecting to on-line equipment, such as personal PC, web-cam,
printer server, etc.

* If more LAN ports are needed, please apply Switch/Hub for
extension

Power ON/OFF

Power ON/OFF

USB

USB Port

Power

Transformer Connected (In-Package)

RESET

REBOOT

* Press over 10 seconds to factory default settings(like your Wi-Fi
password)
* Press about 3 seconds, the device will be rebooted

10

(2) Security Alarm（ZAL211）

Button and Port

Function Description

Mute Alarm Button

ZigBee Button

ZigBee signal extending

Reset/Reboot Button

 Press over 10 seconds to factory default settings(like your Wi-Fi

password)

 Press about 3 seconds, the device will be rebooted

11

(3) Cloud Motion Sensor（MDKA0z）and Cloud Door & Window

Sensor（DDLA0z）

Product

Button and Port

Function Description

DDLA0z

Power Button

ON：Power On

OFF：Power Off

ZigBee LED

ZigBee signal connecting

MDKA0z

Power Button

ON：Power On

OFF：Power Off

ZigBee LED

ZigBee signal connecting

12

(4) Smart Cloud Night Vision Camera with Audio Wireless Router

（IPJC2n）

Button and Port

Function Description

WAN

Connect to xDSL/Fiber, Static IP, Dynamic IP, PPTP, L2TP, Wi-Fi ISP
AP, WiFi-AP

LAN

* Connecting to on-line equipment, such as personal PC, web-cam,
printer server, etc.

* If more LAN ports are needed, please apply Switch/Hub for extension

USB

Connectable

Micro USB Power

Port

Please connect with Sapido adapter.

Volume (- +)

Adjust the volume of speaker

RESET

REBOOT

* Press over 10 seconds to factory default settings(like your Wi-Fi
password)
* Press about 3 seconds, the device will be rebooted

13

(5) Smart Cloud Control Insight Switch Wireless Router（WSG70n）

Button and Port

Function Description

WAN/LAN

Connect to xDSL/Fiber, Static IP, Dynamic IP, PPTP, L2TP, Wi-Fi

ISP AP, WiFi-AP

Power Outlet

Power supply 100V-240V

Manual Button

Switch power ON/OFF

RESET

REBOOT

* Press over 10 seconds to factory default settings(like your Wi-Fi
password)
* Press about 3 seconds, the device will be rebooted

14

1.3 Hardware Installation

Set up the antennas of both Home Gateway (ZGA201) and IP Cam (IPJC2n), then power
on the Smart Switch (WSG70n), Security Alarm (ZAL211), and install batteries of the
Door and Window Sensor (DDLA0z), start up the Motion Sensor (MDKA0z). To use the
security system, you have to download Sapido APP first. Please follow the steps below:

Step 1. Install both Antenna on Home
Gateway (ZGA201).

Step 2. Connect the Ethernet cable to ZGA201
WAN port.

Step 3. Press the white button to start up.

Step 4. Wait for 30 seconds and both ( )/

( ) turn on means start up

successfully.

Home Gateway(ZGA201) is the main router of your SH206+, which with two different

Antennas (one is supported 9dbi, the other one is supported 7dbi)to remain the quality of

WiFi transmission function.

15

Step 5. Install Antenna on IP Cam (IPJC2n).

Step 6. Power on, turns red and blink

to boot.

Step 7. Wait for 30 seconds, and all will turn green means start-up was successfully.

16

Step 8. Plug-in WSG70n. Wait for 30 seconds to start up. When Wireless/WPS light

turns to green, which means the start-up was successful.

Step 9. Plug in with the non-electronic control type of household appliances like below:

*One Switch for one electric appliance only. No extension cord recommend in order to avoid
heavy electric tension.

17

Step 10. Plug-in ZAL211. When lighting red, which means it is under start-up. After

ZigBee LED and Power LED lighting green, which means start-up successful.
Security Alarm(ZAL211) will be triggered if someone open the window/door, giving the
notice for your safety.

Step 11. Please open the lid of the Cloud Door & Window Sensor (DDLA0z), and insert 2 x
AAA batteries.

18

Step 12. Please tear the double-sided tape and paste on the back of Cloud Door & Window
Sensor (DDLA0z). Then paste the DDLA0z one part on the frame of Window, and the other
part on the Window. The interval of both parts is no longer than 1 cm. (You can also fasten
the DDLA0z by the attached fasteners.) Turn on the power. When the ZigBee light is
blinking, which means the DDLA0z is mapping with Home Gateway(ZGA201). Once the
Window is opened, the alarm will start to have the alert sound.

Step 13. Please open the lid of the Cloud Motion Sensor (MDKA0z) and insert 2 x AAA
batteries. Before close the lid, switch the power to ON

Step 14. After fastening the MDKA0z on the hallway or gate, it will trigger the
Alarm(ZAL211)if someone approaches the MDKA0z. When the left light (ZigBee) of
MDKA0z is blinking, means the MDKA0z is connecting properly with Home
Gateway(ZGA201).

19

2. APP Download and Network Setup (iOS system)

Step 1. Please go to APP Store
to download Sapido APP

Step 2. Please click and

search by the key word

<Sapido>. Click <Free> →

<Install>

Step 3. After installing Sapido
APP, it will create a shortcut
automatically on the main
page of your iPhone.

Step 4. Please open the
<Settings> function on your
iPhone.

Step 5. Please turn on and
search for WiFi network
from(ZGA201)

Step 6. Click “Cancel” to
continue.

20

Step 7. Select “Use without
Internet” to complete WIFi
connection with ZGA201.

Step 8. Activate Sapido APP.

Step 9. Click “New IOT”

Step 10. Sapido APP will show the network device name and user name. All you have to do is to
give a name for the network domain in blank and enter the default password “admin” in
blank. In order to protect your network domain security, please click <Change Password> and
enter the new password.

IOT name

You can give your IOT Name in the
blank.

Device
Name

The Device name will show up
automatically, doesn't need to change.

User name of
Domain

The account will show up automatically,
doesn't need to change

Password of
Domain

Need to enter the default password
“admin”

The Options
of Changing
Password

You can change the password for your
domain

21

Step 11.

Password of Domain：

Please enter your password for

your network domain.

WiFi Password：Please

enter your WiFi Password.

Press “New” to complete
setting network domain
security.

Step 12. Connecting...

Step 13. After setting, it will
enter to the log-in page
automatically.

22

Step 14. Turn on

“Setting”→”Wi-Fi” and find

(ZGA201) WiFi signal to

connect.

Step 15. Enter the WiFi

Password you have set on step

11. and press “Join”.

Step 16. Re-enter Sapido APP.

23

Step 17. APP will log-in to the home page, see the instruction below:

Symbol

Function

Status Instruction

Security

Status

Armed

Panic

Disarmed

No security devices

Events

Notification
No new event

New event , click for detail

Scenario

Off Mode/ Custom Mode

Home Mode

Away Mode

Sleep Mode

24

Control

Control your electronic appliances with schedule, statistics data, and on/off

Settings

Rename and manage your home devices

Environme

nt Sensor

To detect home environment and view data with related devices

Real-Time

View

View Camera

Internet

Setting

Internet setting while Gateway doesn't connect with Internet

Digital TV

Watch the digital TV with Sapido NAS TV (WD091n). This function won't show If you

don't have Sapido NAS TV.

Log Out

Log out the system

Advanced

To use more advanced function, please change to the Advanced page.

25

3. All-Link Button Application

3.1 Internet Settings（PPPoE/ DHCP ）

Make sure the network environment stable for any of your smartphone and handheld
devices using first, this step will let you receive emergency messages successfully while
you go out. There are two ways of Internet setting to set-up as below:

1. No need to do additional setting if your Internet is from original router, and the

ZGA201 is connecting with your Ethernet cable already.

2. Follow the steps below if your Internet is from PPPoE:

Step 1. Log in APP and click

“Internet Settings”

Step 2. Click “PPPoE” based

on your Internet type.

Step 3. Please enter your ISP

account and password), and

click “Apply” to continue.

(No need to set up wifi

password again.)

26

Step 4. Please wait for the setup operation. Do
not turn off or return.

Step 5. After the update, the screen will
subsequently goes back to Log-In page, you
might directly connect to the network if you
have 3G in your smartphone, to make sure it is
available for remote use as well.

(See the detail of symbols on Step 6)

Step 6. The instruction of the symbols from the main page:

Guide-light

Light

Statue Instruction

1. The lights of

device of the
domain

Green- Domain and network is
connected.

Gray- Domain and network is
disconnected

Red- Event alert

2. The light sym-

bols of the
Cloud Security

Green- Security System Arm.

Gray- Security System Disarm.

Red- Alarm is triggered.

(Empty)-No Installed or Security
System offline.

3. Change the

password Key

To change the password of domain.

4. Trash Can

Symbol

To delete the domain.

27

3.2 Hardware Wireless Connect Automatically Instruction–

Just power on IP Cam(IPJC2n)、Smart Switch(WSG70n) and press the “All-Link Button”

on Home Gateway(ZGA201), the system will make an automatically connection. Set

up the system with Sapido APP.

Step 1. Press the “All-Link Button” on Home Gateway(ZGA201) 3 seconds. Wait for 2

minutes, the system will make an automatically connection.

28

Step 2. Enter APP then click
“Setting” first to set up
devices.

Step 3. Entered the IOT Settings, you can see the security

system is built-up (as below).

Home Gateway IP Cam

Security Alarm Motion Sensor

Door/Window Sensor Smart Switch

Battery Status

Step 4. In IOT Setting page,
you can rename the device.
Select Home
Gateway(ZGA201)and click
“Rename”.

Step 5. After typing in the new
name, click “Apply” to
confirm.

Step 6. Gateway(ZGA201) has
been shown with new device
name.

29

Step 7. Select IP Camera
(IPJC2n) and click “Rename”.

Step 8. After typing in the new
name, click “Apply” to
confirm.

Step 9. IP Camera has been
shown with new device name

Step 10. Please select the
Security Alarm (ZAL211) ,
then click <Rename>

Step 11. After entering the new
name, please click <Apply>,
then it will show the new
name.

Step 12. The Alarm (ZAL211)
had been changed to the new
name.

30

Step 13. Choose the Cloud
Motion Sensor
(MDKA0z_xxx) in IOT
Setting first, then click
<Rename>.

Step 14. After entering the
new name, please click
<Apply>, then it will show the
new name.

Step 15. The Cloud Motion
Sensor (MDKA0z_xxx) had
been changed to the new
name.

Step 16. Choose the Cloud
Door & Window Sensor
(DDLA0z_xxx) in IOT Setting
first, then click <Rename>。

Step 17. After entering the
new name, please click
<Apply>, then it will show the
new name.

Step 18. The Cloud Door &
Window Sensor
(DDLA0z_xxx) had been
changed to the new name.

31

Step 19. Choose the Smart
Switch (WSG70n_xxx) in IOT
Setting first, then click
<Rename>

Step 20. After entering the
new name, please click
<Apply>, then it will show the
new name.

Step 21. The Smart Switch
(WSG70n_xxx) had been
changed to the new name.

Step 22. After renaming, select any device and click to access GUI.

32

4. Scenario–

There are five scenarios in system for you to face your needed. For example, set up “Away
Mode” while you are away, it is a scenario contain several functions like making security alarm
with security devices; also, you can make “Home Mode” while you are at home for turn off the
alarm. Create your own scenario in “Custom Mode” brings more convenience in your life!

4.1 Home Mode

Step 1. Log in to the Basic

Function home page, and click

“Scenario”.

Step 2. “Off Mode” has already

selected, this scenario means

there is no scenario now in this

system.

Please select “Home Mode”

for further settings.

Step 3. “Home Mode” setting

suggestion below:

:Turn on the lamp

:Turn off the motion sensor

in living room

:Turn on the 2F window

sensor without alarm speaker.

Click “Back” for complete

settings.

33

4.2 Away Mode

Step 1. Click in “Away Mode”

for settings.

Step 2. “Away Mode” setting suggestion below:

Turn off the lamp

Turn on the motion

sensor in living room

Turn on the 2F window

sensor

Click “Back” for complete

settings.

4.3 Sleep Mode

Step 1. Click in “Sleep Mode”
for settings.

Step 2. “Sleep Mode” setting suggestion below:

Turn on the lamp

Turn on the motion

sensor in living room

Turn on the 2F window

sensor

Click “Back” for complete

settings.

34

4.4 Custom Mode

Step 1. Click in “Custom

Mode 1” for settings. Create

new name for this mode,

please click .

Step 2. Enter the name, EX:

My Favorite, and click

“Apply”.

Step 3. Click in “My Favorite

Mode” for settings.

Step 4. “My Favorite Mode” setting suggestion below:

Turn on the lamp

Turn off the motion sensor in living room without alarm

speaker

Turn on the 2F window sensor without alarm speaker

Click “Back” for complete settings.

(Create Custom Mode 2 with the same steps)

35

4.5 Mode Change

After setting up the five scenarios, you can continue select the mode you would like to use.
If you want to change to different mode, please follow the instructor below:

Step 1. Click “Away Mode”
while you are away.

Step 2. Make sure you would
like to change to Away Mode,
please click “Yes”.

Step 3. Please wait…

Step 4. Mode change

successfully, please click

“Back” return to the Basic

Function home page.

Step 5. Back to the home page, you can see the Scenario symbol

like , means the system is in “Away Mode”

Based on the “Away Mode” setting, your rule will be under

working.

Instruction of Scenario Symbols:

Off Mode/ Custom Mode

Home Mode

Away Mode

Sleep Mode

36

5. Event Notifications

Step 1. You will receive the

event notifications while the

security system be triggered.

Step 2. If the security system be

triggered, the Event Notification

symbol will become red , and

the Panic symbol will show

up as well. Click in “Event

Notification” to view the detail.

Step 3. The detail of event

notifications will show and sort

by date and time. Click into a

specific event.
Step 4. Click the alarm speaker

symbol to mute the alarm. To

view the recording, just click

the “Video Recording”.

Step 5. 30 seconds recording

playing…Click “Exit” return to

the page.

Step 6. You will see the security

status turn green means the

system is back in status and

under working.

37

6. Application of Arm/Disarmed/Panic

Step 1. You will receive the
event notifications while the
security system be triggered.

Step 2. If the security system be triggered, the “Panic” symbol

will show up . Click the Panic sign and it will turn back to the

“Arm” symbol means the system is back in status and under

working.

Step 3. Click “Real-Time View”
to check the camera.

Step 4. . Click “ Arm” once you find the intruder in the camera
screen.

: Volume adjustor.

38

7. Application of IP Camera

5.1 Real-Time Screenshot and Browse

Step 1. Click “Real-Time
View”

Step 2. Click “Screenshot” in
below to immediate save the
image in your smartphone

Step 3. Click “View Picture”
to review the screenshot
image.

Step 4. The images will be
sorted by date; please direct
select the date you want to
view.

Step 5. Image checklist will
be listed in order by time
sequence. See left side to
directly preview the image,
and click the image for full
screen review.

Step 6. Click below Play icon
to review all images in turn
when browsing full screen
image

39

5.2 Surveillance Recording and Browse

Step 1. Click the functional

key “ Record”

Step 2. Setting, please wait...

Step 3. When the recording

starts, you can find the red

pot on the top left corner.

Step 4. Video will be

automatically stored in the

USB drive of IP camera;
please go「 View
Videos」for video browse.

Step 5. Videos will be sorted

by date and time, please

directly choose the video you

want to view.

Step 6. Select the video for
immediate play.

40

Step 7. Click “Exit” when
finished, and goes back to the
last page. (Rotating the device
to enlarge for browse)

Step 8. Click “Download” if
you want to back up the files
to your smartphone or other
devices.

Step 9. Video Downloading…

Step 10. Once download
successfully and then you can
play it.

Step 11. Downloaded files
will be directly stored in
“Camera” of “Download
List”.

Step 12. Please Click “

Stop” to stop recording.

41

Step 13. Click “Apply”

Step 14. Please wait…

Step 15. Once the red pot is
disappeared, the recording has
been stopped.

42

5.3 Personalized Recording Schedule

You can set up the recording schedule at different time based on your requirement, such as
personalize the recording time during day time or bedtime, the operating method are as
below:

Step 1. Click “ Schedule”

Step 2. Click “New” to add
new schedule

Step 3. Please first select

“Record Schedule”, and set up

the start time at 22:00 and end

time at 23:59

Step 4. Choose “Everyday”

for Day, and finally click

“Done” for confirmation.

Step 5. You can find the
schedule you just added.
Please again click “New” to
make the 2nd schedule.

Step 6. Choose “Record

Schedule”, and select start

time at 00:00, end time at

06:00.

43

Step 7. Choose “Everyday”

for Day, and finally click

“Done” for completion.

Step 8. You can find the 2nd

schedule added.

To modify the schedule,

please click

To delete the schedule, please

click

Step 9. Click “Confirm” to

finish setting.

Step 10. Please await for
setting...Do not turn off or
return

Step 11. Once the setup is done, the screen will automatically
go back to log-in page. Please again log in.

44

8. Cloud Switch APP On/Off and Schedule Set-up

If you are out or on the way to work, and forget to turn off the electric appliances, such as fan, and
light, etc. You can power ON/OFF the appliances via the Cloud Insight Switch APP power switch
mode. In addition, you can operate the appliances in your house along with the set schedules of
Smart Insight Switch through cycling time setting and schedule function, to surely accompany with
daily routine and fully saving the energy and cost.

6.1 Power On/Off

Step 1. Click “Control” on the

home page of Basic Function

Step 2. Click one specific

electric appliance's power

button at the right next to

device name, button is grey

means OFF.

Step 3. Power button turns to

red means ON.

45

6.2 Set up Schedule of Power On/Off

Step 1. To set up appliances

schedule, please click the

symbol.

Step 2. Click “New”.

Step 3. There are three Switch

Mode to choose in Schedule

Setting:

On：Power on

Off：Power Off

Repeat：Power on/off in cycle

Step 4. If you want to select

power mode in Repeat Mode,

just select it.

Step 5. Set up the rule for

appliance schedule:

ON: 1 Hour and 10 minutes
OFF: 30 minutes
Day: Friday
Start: 10:00
End: 14:00

Click <Done> to complete
setting

Step 6. You can see your
schedule is under the page. To
delete or edit the schedule,

click “delete ” or “edit ”
button to do so.

46

Step 7. Click “Confirm” after

setting.

Step 8. Please await for
setting...Do not turn off or
return

Step 9. Once the setup is
done, the screen will
automatically go back to log­in page. Please again log in.

47

6.3 Electricity Statistics

You can view the data of your specific electric appliance's total daily, weekly, monthly, and
annual power consumption for known if your electric appliance saving power or not.

Step 1. Select the specific

electric appliance

Step 2. You can view the data

of your specific electric

appliance's total “Day”,

“Week”, “Month”, and “Year”

power consumption, like the

picture below

Step 3. For example, click

“Week” to view the detail of

electricity statistics this week.

Step 4. You can also view the

detail of this appliance like

when is the power on time or

working time.

Step 5. To delete all the data
before, click <Reset> on the
top right corner. After deleting,
the device will show up the
time of reset. If you turn on the
power button again, the data
measurement will restart from
the reset time.

Step 6. Click “Yes” to reset.

48

Step 7. Waiting for reset…

Step 8. You will see the reset data after deleting. Click power
ON/OFF to start measuring your specific electric appliance's total
daily, weekly, monthly, and annual power consumption.

49

9. Advanced Function

Once you log into APP, it will lead you to the Basic Function home page.
However, if you want to do more settings, please switch to the Advanced
Function page. Follow the steps below:

Step 1. Click “Advanced” on the
top right hand side of the Basic
function home page.

Step 2. You can see many sections on the Advanced function
home page for users to do more settings.
See instructor below:

50

9.1 IOT Account Management

Admin can manage up to 10 users in different devices limitation. For example, father is
the admin in this system, and he gives the right for mother to change mode, view
cameras, and view the events notification and so on…or gives the right for children to
change mode, and control appliances only. Just follow the steps below:

Step 1. Click “IOT Account

Management.”

Step 2. Click “User 1”.

Step 3. Select “Enable” first,

then giving the account and

password for user 1. EX:

Mommy

Step 4. Continually set up the limitation for User 1. For

example, Mommy can use Scenario, Message, Music, Camera,

Switch, and Internet Security only. Click “Apply” after setting.

Step 5. You will see the User

1’s name turn to “Mommy”

already.

51

Step 6. Click “User2”.

Step 7. Continually set up the limitation for User 2. For example,

Son can use Scenario, Camera, and Switch only. Click “Apply”

after setting.

52

9.2 How to add Family Users to the system

(1) Advice: When the family user’s handheld device is around the

same place.

Step 1. Go to “Settings”

Step 2. Switch on Wi-Fi

Step 3. Select Main Home
Gateway (ZGA201) WiFi
signal to connect.

Step 4. Type in the Security
Password set by network
creator and click “Join”

Step 5. Please click and search by the key word <Sapido>.

Click <Free> → <Install>

53

Step 6. Click downloaded

Sapido APP

Step 7. Click “New IOT”

Step 8. APP will automatically

show device name and
user name, please type in the
password provided by network

family administrator in
column, and click “New IOT” to
log in.

Step 9. There are two function pages can do the setting and

use, see the picture below:

Users will enter the “Basic Function” first automatically.

[Basic Function] [Advanced Function]

Step 10. Click “Back” and

return to home page.

54

(2) When the family user’s handheld device is not around the same

place.

Step 1. Please click and search by the key word <Sapido>.

Click <Free> → <Install>

Step 2. Click downloaded

Sapido APP

Step 3. Click <New IOT>

Step 4. APP will NOT automatically shown information, please

create device name, default user name: admin, and IOT

password provided by network family administrator in

column, and click “New IOT” to log in.

55

Step 5. There are two function pages can do the setting and

use, see the picture below:

Users will enter the “Basic Function” first automatically.

[Basic Function] [Advanced Function]

Step 6. Click “Back” and

return to home page.

56

9.3 Instruction of Scenario Settings

9.3.1 Activation Delay Setting of Scenario’s Smart Switch

Activation Delay setting of Smart Switch is always the same in different modes
(Home/Away/Sleep/Custom Mode). Face your need to set up, see the example (Away
Mode) below:

Step 1. Enter to the Advanced
Function Page and click in
Scenario you would like to do
more settings.
EX: Away Mode

Step 2. Click “Switch”

Step 3. Select the Smart
Switch and click in to do the
settings.

Step 4. Giving an example, if you would like to make an activation delay of automatically turn off
the appliance after 20 minutes in Away Mode to save power. Please click “Activation Delay” and
setting “20 Min”, “working Time” for “Always”, “Switch Mode” is “Off”, press “Done” to
complete setting.

57

9.3.2 Activation Delay & Action Time of Scenario’s Security

Activation Delay and Action settings of Security are always the same in different modes
(Home/Away/Sleep/Custom Mode). Face your need to set up, see the example (Away
Mode) below:

Step 1. Click in Scenario you
would like to do more settings,
and click “Security”.

Step 2. Select the sensors you
would like to set up.

Step 3. Click in the Motion
Sensor to do the settings.

Step 4. You will set up the “Activation Delay” and “Action
Time” of Motion Sensor. Also, you can select the devices to act
after Motion Sensor be triggered, such as Alarm, Switch,
Speaker, and Camera. Select ‘Notification Message” means you
will receive push notification if Motion Sensor be triggered.

Step 5. For turn on the lamp
after the Motion Sensor be
triggered. Select the “Switch”
and click in to do the settings.

58

Step 6. Click “Switch Mode”

Step 7. Face you need to set up the Switch Mode

(On/Off/Repeat). Click “Done” after settings.

Your lamp will follow the rule after make the rule for triggering.

Step 8. Back to the page for set up the “Activation Delay”.

If you want to let the motion sensor action delay 10 minutes after triggered, just click

“Activation Delay” and set up the time. “Action Time” for “Always”, then press “Done” to

complete settings. Your Motion Sensor will follow the rule you just make if it is triggered.

59

9.3.3 Activation Delay & Working Time of Scenario’s Camera

Activation Delay and working Time settings of Camera are always the same in different
modes (Home/Away/Sleep/Custom Mode). Face your need to set up, see the example
(Away Mode) below:

Step 1. Click in Scenario you
would like to do more settings,
and click “Camera”.

Step 2. Select the specific
Camera you would like to set
up.

Step 3. Click in the Camera.

Step 4. If you want to let the Camera action delay 30 minutes after triggered, just click
“Activation Delay” and set up the time. “Working Time” for “Always”, then press “Done” to
complete settings. Your Camera will follow the rule you just make if it is triggered.

60

9.3.4 Activation Delay & Music Player of Scenario’s Online

Streaming

Activation Delay and Music Player settings of Online Streaming are always the same in
different modes (Home/Away/Sleep/Custom Mode). Face your need to set up, see the
example (Away Mode) below:

Step 1. Click in Scenario you
would like to do more settings,
and click “Online Streaming”.

Step 2. Select the specific
Camera you would like to play
music.

Step 3. Click in the Camera.

Step 4. If you want to let the Camera action delay 1 hour after triggered, just click “Activation

Delay” and set up the time. “Working Time” for “Always”, then press “Done” to complete

settings. Your Camera will follow the rule to play music you just make if it is triggered.

61

Step 5. Click “Music List” to choose the music you would like
to play, and click “Done”.

*Upload music to the USB first, please see the detail on section 12.3.1

Step 6. You can see the Music
List shows 3, which means
you have select three songs to
play with the rule you made.

62

9.4 Security Schedule Setting with Off Mode

Make the schedule for you Sensors with Off Mode to activate the security system. Follow
the instruction below:

9.4.1 Door & Window Sensor

Step 1. Click “Security”

Step 2. Click the clock sign

next to the Door &

Window Sensor.

Step 3. Click “New”

Step 4. Giving an example, make the schedule from 8AM to
5:30PM every day. See the picture below. Click “Done” after
settings.

Step 5. You will see the
schedule you just made has
shown already.

63

Step 6. Click “Confirm” to

use this schedule.

Step 7. Please await for
setting...Do not turn off or
return

Step 8. Once the setup is
done, the screen will
automatically go back to log­in page. Please again log in.

Step 9. You will see the clock

sign turn dark grey , which

means it is under schedule

working.

Step 10. To turn off all the functions of your Door & Window

Sensor, just slide to “OFF”.

64

9.4.2 Motion Sensor

Step 1. Click the clock sign

next to the Motion Sensor.

Step 2. Click “New”

Step 3. Giving an example,
make the schedule from 8AM
to 5:30PM every day. See the
picture below.

Step 4. Click “Done” after
settings.

Step 5. You will see the
schedule you just made has
shown already.

Step 6. Click “Confirm” to
use this schedule.

65

Step 7. Please await for
setting...Do not turn off or
return

Step 8. Once the setup is
done, the screen will
automatically go back to log­in page. Please again log in.

Step 9. You will see the clock

sign turn dark grey , which

means it is under schedule

working.

Step 10. To turn off all the functions of your Door & Window Sensor, just slide to “OFF”.

66

9.5 Application of IP Camera

9.5.1 Add the music to USB drive of IP Camera

IP Camera can be your music player, you are able to store your favorite music in USB
drive of IP Camera via “Upload” and bring you more options.

Step 1. Plug in the USB drive
into your PC.

Step 2. Save your favorite
music into USB drive.

Step 3. Plug USB drive back
to the top of IP Camera
(IPJC2n)

Step 4. Select “Camera”
Step 5. Select “Play”

Step 6. Click “Change” to

choose path.

67

Step 7. Select the “play mode”

per your need
In order: Play in order
Repeat: Repeat all selected
music and play
Timer: Play in scheduled
hours/minutes and stop

Step 8. If you want to play

music for 2 hours and then

stop, please first select

Schedule Mode and set up the

time, click “Done” to

complete.

Step 9. First select the music

you want to play (or whole

folder), and click “Play” on

the top right corner.

Step 10. In music play mode,

you can adjust the volume via

Step 11. Click “Stop ” to

stop music.

Step 12. Music play is

stopped.

68

9.5.2 Schedule Setup of Music Play

Step 1. Click “Schedule ”

Step 2. Click “New”

Step 3. For example, set up
automatic music play at every
12:00 pm to 13:00 pm; please
first select “Music Schedule”
mode,

Step 4. Set the start time at
12:00 pm and end time at
13:00 pm and choose
“Everyday” for Day.

Step 5. Click “Music” to
choose the music you would
like to play.

Step 6. First select the music
(or whole folder), and then
“Play”

69

Step 7. Click “Done” in top
right corner for completion.

Step 8. You can see the music

schedule you just added in the

checklist.

To modify, please click

To delete, please click

Step 9. Click “Confirm” to
finish setting.

Step 10. Please await for
setting...Do not turn off or
return

Step 11. Once the setup is done, the screen will automatically
go back to log-in page. Please again log in.

70

9.5.3 Schedule Setup of Custom Alarm

Custom your own alarm via Sapido APP and use the IP Cam to wake you up everyday!

Step 1. Enter to the Camera

page and click “Custom

Alarm” sign on the top

right hand side.

Step 2. Tap to start recording

your voice .

Step 3. The microphone will

turn orange while

recording, press the sign once

again to stop recording.

Step 4. Stop recording. Wait
for the system uploading the
alarm…

Step 5. After recording your own alarm, it will automatically up
load to the USB of IP Cam. Create a name for your alarm (EX:
for wake up) or system will give the name with date. Click
“Apply” after naming.

71

Step 6. Uploading the file,
please wait…

Step 7. Upload finished. Press
“Back” to the front page.

Step 8. Click “Schedule” in
below.

Step 9. Click “New”

Step 10. For example, to set up the morning alarm at every 6:00
am; please first select the mode as “Siren Schedule” and set the
start time at 6:00 am, end time at 6:05 am, and select
“Everyday” for Day.

72

Step 11. Select “Siren”
Step 12. You can see the siren

schedule you just added in the

checklist.

To modify, please click

To delete, please click

Step 13. Click “Confirm”.

Step 14. Please await for
setting...Do not turn off or
return.

Step 15. Once the setup is done, the screen will automatically
go back to log-in page. Please again log in.

73

9.5.4 Upload 30 sec Record File to Dropbox Automatically

30 seconds recording file will save in the USB of IP Cam. If you would like to make it
backup automatically on your Dropbox space, please follow the steps below:

Step 1. Click the sign on

the top right hand side of the

page of Camera.

Step 2. Click “Dropbox

Status”

Step 3. Choose “Connected”

then back to the front page.

Step 4. Dropbox Status shows
“Connected”. Press “Apply”
for saving settings.

Step 5. Sign in your Dropbox account and click “Sign In and
Link”. Your 30 second video recording will automatically
upload to your Dropbox from now on.

74

9.6 Smart Switch Application Instruction

Sapido creates a new device “WSG70n”, Smart Cloud Switch, matches smartphone (iOS, Android)
to control your electric appliances anytime anywhere. In addition, Sapido APP offers numerous
functions: power consumption measurement, power switch set-up, schedule making, and start-up
timing with the specific electric appliance for historical electric information reference. Also, it
provides the function of over-heating protection. Giving you a lifestyle with smart protection, power
saving, and energy conservation.

※ You can turn on/off the power directly click the power button on the Smart Switch

(WSG70n) if you are home.

*Turn on/off power via Sapido APP when you are out:

75

9.6.1 Cloud Switch APP On/Off and Schedule Set-up

Step 1. Click <Switch>

Step 2. Click one specific

electric appliance's power

button at the right next to

device name, button is grey

means OFF.

Step 3. Power button turns to

red means ON.

Step 4. Select one specific
electric appliance.

Step 5. You can view different
functions such as: Power on
Reason, power consumption,
Uptime & Since time of
startup.

Step 6. If you want to change
the Switch Mode to “Repeat”,
click <Switch Mode>.

76

Step 7. Click <Repeat>

Step 8. Get Started to set up
Repeat Condition, for example,
let it power on for 3 minutes
and turn off for 1 minute in 10
minutes as a period. Click
<Done> to finish setting.

Step 9. Back to the front page
automatically, and your electric
appliance will follow the
schedule you have set-up

Step 10. Back to the front page,

you will see the repeat sign at the

right next to the device name that

means your setup was

successful. Now turn the repeat

sign to red represents turn

on the repeat mode.

Step 11. After ten minutes in a

period, the sign will turn to

grey.

Step 12. If you want to stop the

repeat mode, click the sign

and it will turn to grey

.

77

9.6.2 Switch Repeat Schedule Setting (Examples)

Smart Cloud Switch can turn on/off your electric appliances based on the schedule that you
have set. For example, use Switch to maintain in-door temperature. Set up Fan’s working
schedule: Repeat the mode of turn on 1 hour and 10 minutes then turn off 30 minutes every
Friday from 10AM within 5 hours period.

Step 1. Select <Schedule
setting>.

Step 2. Click <New> on the top
right corner to add your new
schedule.

Step 3. Select “Repeat” of
Switch Mode.

Step 4. Set up the schedule like
this: ON: 1 Hour and 10
minutes
OFF: 30 minutes
Day: Friday
Start: 10:00
End: 14:00

Then click <Done> to complete
setting

Step 5. You can see your

schedule is under the page. To

delete or edit the schedule, click

“delete ” or “edit ” button

to do so.

Step 6. Click “Confirm” to

complete setting.

78

Step 7. Please await for
setting...Do not turn off or
return.

Step 8. Once the setup is done, the screen will automatically go
back to log-in page. Please again log in.

79

9.6.3 How to view the electronic history

Step 1. Click <Switch>

Step 2. Select the specific
electric appliance

Step 3. Click <History>

Step 4. History record of your
electric appliances power on/off
Cloud Switch Schedule: Use
schedule set-up to turn on/off
power
Mobile APP Switch: Use mobile
APP to turn on/off power
Button: Press Button on the Smart
Switch to turn on/off power

Step 5. To delete all the data,
click <Reset>

Step 6. All history record were
deleted

80

9.7 Application for Media Storage

9.7.1 Upload the files in mobile device to IP Cam USB drive

Besides saving the recording image, USB drive of IP Camera is a media storage center as
well, you can upload photos, videos and files, etc. in your mobile device to USB drive for
expanding your storage spaces, and share to you family members at the same time.

Step 1. Click “Upload”

Step 2. Click “Camera Roll”

Step 3. Tick the files you want
to upload (ex: photos), and
click “Change” to select the
path.

Step 4. Select your device
name (nickname)

Step 5. Click “New Folder”

Step 6. Rename the folder,
such as “Photo”, and click
“Apply”

81

Step 7. Select new added
folder.

Step 8. Click “Upload”

Step 9. Uploading the files…

Step 10. Please click “Upload
more files” after upload
succeeded.

Step 11. Click “Back” to select
other files. (ex: video)

Step 12. APP will memorize
the path of last upload, click
“Upload” without changing
path, or click “Change” to
choose other path.

82

Step 13. The device will
memorize your recent 5
upload paths as the shortcut.

Step 14. If you want to upload
to other path, please select the
device name (nickname)

Step 15. Click “Upload”

Step 16. Uploading

Step 17. All file upload succeeded, click “Upload more files” to
upload other files, or click “Home” to leave.

83

9.7.2 File download from USB drive of IP Cam

Step 1. Click “Download”

Step 2. Select your IP Cam
device name (nickname)

Step 3. Select the files you
want to download (ex: video)
and click “Download”

Step 4. Downloading…

Step 5. File download
succeeded

Step 6. You can select the files
and click “Play” on the top
right corner to browse the file.

84

Step 7. During file playing, please rotate the smartphone or tablet to enlarge the screen.

Step 8. Return to download
succeeded page and click
“Download more files”.

Step 9. Click right next to

folder to set as “Favorites”.

Step 10. Click “Back” to
return to the device selected
page, and you will see
“Favorites” has been shown in
download shortcut. Click the
folder to directly access the
folder.

85

Step 11. Select the files you
want to download and click
“Download” at top right
corner.

Step 12. Downloading…

Step 13. File download
succeeded. You can see
contracted photos, select the
files and click “Play” at top
right corner to browse.

Step 14. During file play, rotate the smartphone and tablet to enlarge the photo. Click “Exit” to
end the browse and return to download succeeded page.

86

9.7.3 Online Streaming – Play the document in USB of your IP Cam via

handheld device

Building in video and picture browser in APP, just click the file you want to review. In
addition, both video format of MP4 and AVI are supported.

Step 1. Enter Sapido APP and
click “Online Streaming”

Step 2. Click “IP Cam” (Nick
Name)

Step 3. Choose the file path
you want to browse.
(Video format of MP4 and AVI
are supported)

Step 4. Rotate the smartphone or tablet to enlarge the screen. During video play, click “Exit” to
stop and return to the previous page.

※ The video function will auto play next video after the original one finish played.

87

Step 5. Please again select the
file your want to browse.

Step 6. During file browse, touch the screen to hide the
functional key bar for full screen browse. Click “Exit” to top and
return to the previous page.

88

9.8 Network Security

9.8.1 Network Security – Network security setup and internet device

control

Parents can review the website history to monitor, and control children on-line time and
website, and enable to remote log in to check and see internet attack status.

(1) Client List

Step 1. Click “Network
Security”

Step 2. Click “Client List”

Step 3. is to set up the
internet block time, and make
it block during a period.

Step 4. Select the start and
end time of block (in 24-hour
time system), and then select
“weekday” and click “Apply”
to save.

Step 5. Setting, please await.

Step 6. After setting, APP will
automatically log out and
return to the home page.
Please log in again.

89

Step 7. Click “Network

Security”

Step 8. Click “Client List”

Step 9. right next to block
device is shown as light gray
with “ON”, block setting is
succeeded.

Step 10. If you want to cancel
the setup, just directly push
the device switch to OFF

Step 11. Click “Sure” to
confirm

Step 12. Please await…

90

Step 13. After setting is done,
APP will automatically log
out. Please again log in.

Step 14. Click “Network
Security”

Step 15. Click “Client List”

Step 16. The clock symbol
of block device has become
dark gray with “ON”, block
setting is succeeded.

Step 17. If you want to unlock
the block to a specific device,
please directly push the
device switch to OFF

Step 18. Click “Apply” to
unlock, and the device can be
on-line again.

91

Step 19. Please await…

Step 20. APP will
automatically log out after
finishing setting, please again
log in.

Step 21. Click “Network
Security”.

Step 22. Click “Client List”

Step 23. When the block switch of device shows as gray

and clock symbol shows as light gray , the device

can be on-line.

92

(2) 2.4G Wireless Schedule

Step 1. Click “2.4G Wireless
Schedule”

Step 2. Enter into checklist
and click “New” on top right
corner.

Step 3. Select online start and
end time (in 24-hour time
system).

Step 4. Setting, please await.

Step 5. After the setting, APP
will automatically log out,
please again log in.

Step 6. Click “Network
Security”

93

Step 8. Click “2.4G Wireless
Schedule”

Step 9. You can review the list

of wireless schedule, and click

edit or delete

(3) 5G Wireless Schedule

Step 1. Click “5G Wireless
Schedule”

Step 2. Enter into checklist
and click “New” on top right
corner.

Step 3. Select online start and
end time (in 24-hour time
system).

94

Step 4. Setting, please await.

Step 5. After the setting, APP
will automatically log out,
please again log in.

Step 6. Click “Network
Security”

Step 7. Click “5G Wireless
Schedule”

Step 8. You can review the list

of wireless schedule, and click

edit or delete

95

(4) Keyword Blocked

Step 1. Click “Keyword
Blocked”

Step 2. Enter the keyword you
want to block, such as Yahoo,
and click “New” to confirm.

Step 3. Please await…

Step 4. APP will automatically
log out after setting, please
again log in.

Step 5. Click “Network
Security” → “Keyword
Blocked”

Step 6. You can review the
block list, and new added
keyword has been added.

96

Step 7. To unlock the blocked
keyword, please first select the
keyword you want to unlock,
and click “Unlock” on top
right corner.

Step 8. Please await…

Step 9. APP will automatically
log out after setting, please
again log in.

Step 10. Click “Network
Security”

Step 11. Click “Keyword
Blocked”

Step 12. To review the block
list, and you can find the
unlock keyword has been
removed from list.

97

(5) Website History

Step 1. Click “Website
History” to review all devices
which are connected to
internet via this router.

Step 2. Access to the website
history checklist and select the
device you want to review.

Step 3. To review all visit
website checklist of device,
and you can select any of
website and click “Preview”.

Step 4. You can first preview
the visited website and decide
if blocking the website or not.
Click “Back” to end.

Step 5. Again return to website
checklist and select the
website you want to block,
click “Block” in below to
confirm.

Step 6. Setting, please await…

98

Step 7. APP will automatically
log out after setting, please
again log in.

Step 8. Click “Network
Security”

Step 9. Click “Website
History”

Step 10. You will find added
block website is appeared in
below block list.

Step 11. To unlock the
website, please first select the
website you want to unlock
and click “Unlock” on top
right corner.

Step 12. Setting, please await.

99

Step 13. APP will
automatically log out after
setting, please again log in.

Step 14. Click “Network
Security”

Step 15. Click “Website
History”

Step 16. You will see the website which is just unlocked has been removed from the block list.
Unlock is succeeded.

100

(6) Distributed Denial of Service (DDoS)

Step 1. Click “Network
Security” after log-in.

Step 2. Click “DDoS”

Step 3. When your network is
attacked, you can review the
attack type, situation and
time.

(If there's no event, the list
will be blank)

(7) Login History

Step 1. Log in IOT and click
“Network Security”

Step 2. Click “Login History”

Step 3. You can review all
device IP, and log-in date and
time here.