Sapido BRF71n,BRE71n,BR270n,RB-1602G3,BRB72n Quick Installation Manual
http://www.sapido.com.tw Quick Installation Guide v1.0.0
1
http://www.sapido.com.tw Quick Installation Guide v1.0.0
2
FCC CAUTION ................................................................................................................................................... 3
1
INTRODUCTION ............................................................................................................................ 5
1.1
LED INDICATORS ....................................................................................... 6
1.2
PRODUCT APPEARANCE ................................................................................ 7
2
INSTALLATION DIAGRAM ......................................................................................................... 7
3
SETTING .......................................................................................................................................... 9
3.1
USING LAPTOP ........................................................................................... 9
3.2
USING IPHONE/IPAD .................................................................................. 13
3.3
USING ANDROID MOBILE DEVICE ................................................................... 17
http://www.sapido.com.tw Quick Installation Guide v1.0.0
3
FCC Caution
FCC Part 15.19 Caution:
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation
2. This device and its antenna(s) must not be co-located or operating in conjunction with
any other antenna or transmitter.
3. Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
The antennas used for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter.
FCC Statement in User’s Manual (for calss B)
FCC Section 15.105
“Federal Communications Commission (FCC) Statement”
This equipment has been tested and found to comply with the limits for a lass B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
http://www.sapido.com.tw Quick Installation Guide v1.0.0
4
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CE Statement of Conformity
Our product has been tested in typical configuration by Ecom Sertech Corp and was found to
comply with the essential requirement of “Council Directive on the Approximation of the Laws of
the Member States relating to Electromagnetic Compatibility” (89/336/EEC; 92/31/EEC; 93/68/EEC)
http://www.sapido.com.tw/ Quick Installation Guide v1.0.0
5
1 Introduction
BRF71n is an easy-to-setup and wireless device for various application and environment,
especially for hotel, office, warehouse, hot-spot, and etc...
The mail features of BRF71n:
International Golden A ward winning; MIT quality assurance: Glod Medal
CIGIF 2012 award. MIT quality assurance standards, and uses Green AP power
saving technology.
The smallest device with built-in AC/DC adaptor; easy carrying along: One of
the smallest built-in foldable adaptors both available for AC/DC power charges.
Ideal for trvelers. Micro USB supports multiple power charges (e.g. laptop or car
charger) without limits.
Super USB; friendly mobile APP: Connect webcam, USB drive, and USB speaker
for cloud monitor. File sharing and wireless AirPlay via smart cloud APP.
Support 3G/4G(LTE); Plug and Play: Supports more than 300 3G/4G modems
and smartphones. Plug and Play. Access Internet easily.
Provides a portable access point (AP) while travelling: Use this portable router to
easily and quickly convert any wired connection (in a hotel or otherwise) into a
Wi-Fi signal.
Supports Wi-Fi AP signal extension and one-touch WPS encryption: Wi-Fi AP
hardware switch extends the existing wireless network. The best Wi-Fi range
extender. One touch WPS button for wireless range extension to eliminate dead spot
between floors.
http://www.sapido.com.tw Quick Installation Guide v1.0.0
6
1.1 LED Indicators
LED Function Color Status Description
System status
Green
On Syst em is ready to work
Blinking
120ms
1.
Power is being applied and system
boot in progress
2. Reset or firmware upgrade in progress
Wireless activity
&
WPS status
Green
On Wireless is connected
Blinking
30ms
Wireless Tx/Rx activity
Reddish
Orange
Blinking
120ms
WPS functio n in progress
WAN port activity
Green
On 100Mbps Ethernet is connected
Blinking
30ms
100Mbps Ethernet Tx/Rx activity
Green
On 10Mbps Ethernet is connected
Blinking
120ms
10Mbps Ethernet Tx/Rx activity
LAN port activity
Green
On 100Mbps Ethernet is connected
Blinking
30ms
100Mbps Ethernet Tx/Rx activity
Green
On 10Mbps Ethernet is connected
Blinking
120ms
10Mbps Ethernet Tx/Rx activity
http://www.sapido.com.tw Quick Installation Guide v1.0.0
7
1.2 Product Appearance
2 Installation Diagram
Step 1. Connect Internet connection which ISP provides to the WAN port of BRF71n.
Step 2. Power on BRF71n.
Loading...