Sapido BRE70n,BRF70n Quick Installation Manual
http://www.sapido.com.tw Quick Installation Guide v1.0.0
1
http://www.sapido.com.tw Quick Installation Guide v1.0.0
2
FCC CAUTION ................................................................................................................................................... 3
1
INTRODUCTION ............................................................................................................................ 5
1.1
LED INDICATORS ....................................................................................... 6
1.2
PRODUCT APPEARANCE ................................................................................ 7
2
INSTALLATION DIAGRAM ......................................................................................................... 7
3
SETTING .......................................................................................................................................... 9
3.1
USING LAPTOP ........................................................................................... 9
3.2
USING IPHONE/IPAD .................................................................................. 13
3.3
USING ANDROID MOBILE DEVICE ................................................................... 17
http://www.sapido.com.tw Quick Installation Guide v1.0.0
3
FCC Caution
FCC Part 15.19 Caution:
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation
2. This device and its antenna(s) must not be co-located or operating in conjunction with
any other antenna or transmitter.
3. Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
The antennas used for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter.
FCC Statement in User’s Manual (for calss B)
FCC Section 15.105
“Federal Communications Commission (FCC) Statement”
This equipment has been tested and found to comply with the limits for a lass B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
http://www.sapido.com.tw Quick Installation Guide v1.0.0
4
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CE Statement of Conformity
Our product has been tested in typical configuration by Ecom Sertech Corp and was found to
comply with the essential requirement of “Council Directive on the Approximation of the Laws of
the Member States relating to Electromagnetic Compatibility” (89/336/EEC; 92/31/EEC; 93/68/EEC)
http://www.sapido.com.tw/ Quick Installation Guide v1.0.0
5
1 Introduction
BRE70n is an easy-to-setup and wireless device for various application and environment,
especially for hotel, office, warehouse, hot-spot, and etc...
The mail features of BRE70n:
International A ward winning; smallest router; weight 22g: CIGIF 2012 Award.
Ultra-light design (22g). Unique Innovation. Extemely light and easy carrying along.
Flexible, smart, and convenient: Multiple modes allow users to act as a standard
router, to connect to public hotspots, to act as an access point (AP), or to extend a
wireless network extender (Wi-FI AP). Automatic network connection technology.
Plug and play. Firmware updates.
Micro USB supports multiple power charges; easy carrying: Micro USB
supports multiple power charge (e.g. laptop or car charger). Comes equipped with a
mini fashion white adapter.
Provides a portable access point (AP) while travelling: Use this portable router to
easily and quickly convert any wired connection (in the hotel or otherwise) into a
Wi-Fi signal.
Supports Wi-Fi AP signal extension and one touch WPS encryption: Wi-Fi AP
hardware switch extends the existing wireless network. The best Wi-Fi range
extender. One touch WPS button for wireless range extension to eliminate dead spot
between floors.
Power-saving Green AP technology and MIT quality assurance: Meets the
802.3az standard and uses green access point (AP) technology to reduce power
consumption by up to 80%.
http://www.sapido.com.tw Quick Installation Guide v1.0.0
6
1.1 LED Indicators
LED Function Color Status Description
Power indicator
Green
On
Power is being applied to this
product
Wireless / WPS
activity
Green
On Wireless is connected
Blinking
30ms
Wireless Tx/Rx activity
Blinking
120ms
Reset is in progress
Orange
Red
Blinking
120ms
WPS function in progress
WAN port
activity
Green
On 100Mbps Ethernet is connected
Blinking
30ms
100Mbps Ethernet Tx/Rx activity
Green
On 10Mbps Ethernet is connected
Blinking
120ms
10Mbps Ethernet Tx/Rx activity
LAN port activity
Green
On 100Mbps Ethernet is connected
Blinking
30ms
100Mbps Ethernet Tx/Rx activity
Green
On 10Mbps Ethernet is connected
Blinking
120ms
10Mbps Ethernet Tx/Rx activity
http://www.sapido.com.tw Quick Installation Guide v1.0.0
7
1.2 Product Appearance
2 Installation Diagram
Step 1. Connect Internet connection which ISP provides to the WAN port of BRE70n.
Step 2. Power on BRE70n.
Loading...