Sanyo XT-32A081H, XT-43A081F Owner's Manual

SANYO

INDIA

72-D129NT-E72Z4

说明书

143X210MM.

内页80g书写纸
封面105g铜版纸

内页白底黑字
封面四色印刷

是

32D1291 3NT725A2T2D

32D1291

说明书内容见下页.

IDX142002B
E7-32D129GV-IN2.2A

1.封面的LOGO尺寸描述及线条,
请不要印刷在成品上.

2.说明书的功能描述,按客户要求
为准;说明书请以客户确认业务签
名为准;

3.32/43型号合订版说明书;

4.封面第二页和封底需留空白页。

5.在

72-D129NT-E72Z2基础上修改

APP页，其它不变。

邓智玲

2019-05-05

50 mm

16.171

mm

E

Y

A

R

S

LED TV

(HD/FHD)

XT-32A081H

XT-43A081F

Thank you for purchasing this Sanyo product.
Please read these instructions carefully before operating this
Product and retain them for future reference.
The images shown in this manual are for illustrative purposes only.

To obtain a more detailed Electronic Copy of this

Product page
Manual or much further contents,go to product page
at our website www.sanyoappliance.in

E-mail: [e-mail]

Need help? Please Call at Toll Free No. 1800 419 5088

Table of Contents

Chapter 1: Introduction

Safety Precautions .............................................................................................................................

Use Environment ................................................................................................................................

Cleaning .............................................................................................................................................

Hanging the TV Set on the Wall ..........................................................................................................

Base Installation

Standard accessories .......................................................................................................................

Optional accessories ...........................................................................................................................

Basic connection .................................................................................................................................

Power connection and aerial...............................................................................................................

External Equipment.............................................................................................................................

Remote Control Functions .................................................................................................................

Buttons on the TV

................................................................................................................................

.............................................................................................................................. 10

Chapter 2: Connections and Setup

Switching on

Switching off .........................................................................................................................................

Network Connection .................................................................................................................................

Initial Setup .............................................................................................................................................

.......................................................................................................................................

Chapter 3: Using your TV

Accessing channels ..............................................................................................................................

Watching connected devices ................................................................................................................

Volume...................................................................................................................................................

Using System Settings...........................................................................................................................

Picture....................................................................................................................................................

Sound

...................................................................................................................................................

Channel .................................................................................................................................................

Smart TV ...............................................................................................................................................

Network .................................................................................................................................................

System ..................................................................................................................................................

Support .................................................................................................................................................

HOME Page .......................................................................................................................................... 21

Multimedia............................................................................................................................................. 22

Supported file format in Media Player.................................................................................................. 23

3
4
4
4
4
5
5

6
6

7
9

11
11
12
13

15
15
15
15

15
16
17
18
18
19
20

Chapter 4: Other Information

Troubleshooting ...................................................................................................................................

Specifications ......................................................................................................................................

2

24
25

110 – 240 V ~ 50/60 Hz
Table-top use / Wall Hanging

Introduction

110 – 240 V ~
50/60 Hz

Sanyo service center.

Sanyo service center

When mounting the product on a wall or ceiling,

When mounting the product on a wall or ceiling,
be sure to install the product according to the

be sure to install the product according to the
method recommended by the manufacturer. This

method recommended by the manufacturer. This
is a safety feature.

is a safety feature.

3

Introduction

Use Environment

Do not place the set on an unstable cart, stand, or table.

Place the set on a place that allows good ventilation.

Do not use the set near damp, and cold areas. Protect
the set from overheating.

Keep the set away from direct sunlight.

Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.

Do not use the set near dust place.

Cleaning

Hanging the TV Set on the Wall

Warning: This operation requires two people.

To ensure a safe installation, observe the following safety
notes:

Check that the wall can support the weight of the TV
set and wall mount assembly.

Follow the mounting instructions provided with the wall
mount.

The TV set must be installed on a vertical wall.

Make sure to use only screws suitable for the material
of the wall.

Make sure that the TV set cables are placed so that
there is no danger of tripping over them.

All other safety instructions about our TV sets are also
applicable here.

Note：
Graphics contained within this operating
instructions are for presentation only.

WARNING:

The batteries shall not be exposed to excessive heat
such as sunshine, fire or the like.

Base Installation

To fix the double support base on the unit by screws,
the installation is completed.

1 Connect the pedestal to the TV set

Put the two pedestals on the designated positions
of the TV set carefully.
Lay your TV flat (screen down) on the edge of a
table or bench. Make sure that you put down a
soft cushion or cloth so that your TV is not
scratched.

2 Fasten and tighten the screws

Carefully put in screws and fasten them securely.

4

Introduction

Standard accessories

Remote
Control

Pedestal

Screws

32” Screws:ST4X15(4EA)
43” Screws:ST4X20(4EA)

Battery

(AA size, 2 pcs)

Accessories may not be placed all together. Take care not to throw them away unintentionally.
This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by

young children accidentally. Keep these parts out of reach of young children.

Optional accessories

Sanyo service center

Operating

Instructions

LED TV

E

A

Y

R

S

(HD/FHD)

XT-32A081H

XT-43A081F

Thank you for purchasing this Sanyo product.
Please read these instructions carefully before operating this
Product and retain them for future reference.
The images shown in this manual are for illustrative purposes only.

Product page

To obtain a more detailed Electronic Copy of this
Manual or much further contents,go to product page
at our website www.sanyoappliance.in

E-mail: [e-mail]

Need help? Please Call at Toll Free No. 1800 419 5088

Rear of the TV

32” class

100 mm
100 mm

Sanyo

43” class

200 mm
100 mm

32"：6 mm

43"：14 mm

Screw specs

32"：M4*8

43"：M6*12

5

Basic Connection

Terminals

Introduction

LAN

AUDIO OU T

AV IN

1

2

VIDEO

L

3

AUDIO

R

1 LAN
2 AUDIO OUT
3 AV IN
4 HDMIx2

(P.12)
(P.8)

(P.7)
(P.7)

Power connection and aerial

AC cord

110 – 240 V ~
50/60 Hz

5 USBx2
6 SPDIF
7 ANTENNA

(Sound O ut)

USB 2.0

SPDIF ANTENN AHDMI 1

(P.7)
(P.8)
(See below)

4

HDMI 2

USB 2.0

5

6

7

TV

ANTENNA cable

ANTE NNA

Power Connection

Connect the TV’s power cable to a power outlet.

Aerial

Note

Do not place the RF cable under the TV.

To obtain optimum quality picture and sound, an aerial, the correct cable(75Ω coaxial), and the correct terminating

plug are required.
If a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial
socket and the TV.
Your Sanyo Service Centre or dealer may be able to assist you in obtaining the correct aerial system for
your particular area and the accessories required.
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the Customer.

6

Introduction

External Equipment

These diagrams show our recommendations for connection of your TV to various pieces of equipment.

Check the type of terminals and cable plugs are correct when connecting.
Please also read the manual of the equipment being connected.
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.

USB devices

Never remove the USB device or turn off the TV while using

Rear of the TV

5 V

5
0
0 mA

USB 2.0

USB 2.0

the USB device.

The First inserted USB will be regarded as Device C as default,
and Second inserted USB would be reflected as Device D.

AV devices

AV Cable are often color-coded to
connectors. Connect yellow to yellow,
red to red, white to white.

VIDEO

AV IN

L

H
D
MI 1

(Sound O ut)

HDMI 2

AUDIO

R

AV cable

VCR

or

VIDEO L-AUDIO-R

or

Camcorder

Game console

HDMI equipment

HDMI cable

Note: If your device has an HDMI connection, we recommend
you use that to get the best quality possible.

If the external device has a DVI output only, use a DVI to
HDMI adapter cable to connect to the HDMI terminal.

Note: For the audio receiver control Sound Out, firstly you must
have a device which supports HDMI Sound Out, then connect it
to the HDMI2 port. When the "Soundbar ready" is enabled on
your TV, the TV set's speakers will mute automatically and the
audio will be outputted on your sound device system.

Recorder / Player

Camcorder

7

External Equipment

Rear of the TV

Introduction

Amplifier with

AUDIO OUT

Audio cable

SPDIF cable

speaker system

8

Introduction

Remote Control Functions

Most of your television's functions are available via the menus that appear on the
screen. The remote control supplied with your set can be used to navigate through
the menus and to configure all the general settings.

POWER

INPUT

GUIDE

MENU

TEXT

STTL/AD

ASPECT

INFO

EXIT

APPS
HOME

OK

OPTION

RETURN

Red(R) button

Green(G) button

Yellow(Y) button

Blue(B) button

VOL

CH

MUTE

0-9

LAST VIEW

(On/Off button) Turns the TV on or off.

Press to select signal source.

AV

Access the TV mode.

TV

Display the information of digital program.

(Only available in digital mode)

Brings up the menu system.

Teletext.

Press to display the Subtitle Language menu.

Selects the picture size: 16:9format,4:3format,cinerama,16:9zoom,

16:9 zoom up,14:9 zoom.

Note:Some options may not be selectable for certain signal sources.

Displays the status information.

Exits the menu system.

Goes to the APP Store homepage.

Goes to the smart TV homepage.

(up, down, left and right direction buttons) Highlights different items
in the menu system and adjusts the menu controls.

Confirms your selection.

Brings up the option menu.

Exit the menu and return to the previous menu.

In corresponding mode, press it to enter the right function as hint.

In corresponding mode, press it to enter the right function as hint.

In corresponding mode, press it to enter the right function as hint.

In corresponding mode, press it to enter the right function as hint.

Increases or decreases the TV's volume.

+/-

Scans up or down through the current channel list.

(MUTE) Reduces the TV's volume to its minimum level. Press again
to restore the volume.

(numeric buttons) Enters channel numbers.

Not supported.

Returns you to the previous channel in TV mode.

This key will function as backward play in USB.

This key will function as forward play in USB.

This key will function as previous song, video, picture in USB.

This key will function as next song, video, picture in USB.

This key will function as pause in USB mode.

This key will function as play in USB mode.

This key will function as stop in USB mode.

To record programs under DTV source.

9

Introduction

Buttons on the TV

Take a certain model for an example:

1. \ button
Scans up/down through the channel list. In the menu system, they act like the up/down direction buttons on the

remote and adjust menu controls.

2

. \ button

Increases/decreases the volume.In the menu system,they act like the right/left direction buttons on the
remote and adjust menu controls.

/ button3.

Turns the TV on. The TV is on, press it to display Source Select. In some menus,press to return to the previous
menu,long press it for 3 seconds to display NAV menu.

Note: The location and names of the function buttons and power button on the TV may vary according to TV model.

10

Chapter 2

Connections and Setup

Switching on

Follow the instructions on this page on how to switch on your TV set and the remote
control before going on to following pages describing how to use the channel set-up
procedure.

1. Insert two AA batteries in the remote control.

Precautions on using batteries:

- Only use the battery types specified.

- Make sure you use the correct polarity.

- Do not mix new and used batteries.

- Do not use rechargeable batteries.
Do not expose batteries to excessive heat such as sunshine, fire or the like,

-

throw them in a fire, recharge them or try to open them, as this could cause
them to leak or explode.

- Remove the batteries from the remote control if you are not using it for a long

period of time.

2. Connect the power cable FIRST to the television, THEN to a mains socket.

(Note: If the power cable is connected to the television, please only connect the
power cable to the mains socket.)

Your TV set should only be connected to an AC supply. It must not be connected
to a DC supply. If the plug is detached from the cable, do not, under any
circumstances, connect it to a mains socket, as there is a risk of electric shock.

Note: The figures are for representation only. The location of the power socket at

the back of the television might differ depending on the model.

3. Connect an outside aerial to the ANTENNA IN socket at the back of the TV set.

The aerial socket (75 OHM - VHF / UHF / cable) can be used for connecting
an external aerial or other equipment fitted.

4. When powered on, the TV will be turned on directly or be in standby.

Note: For some models, s

If the power indicator lights up, the TV set is in standby mode. Press the
button on the remote control or on the TV set to turn on the TV.

witch the TV on by pressing the power button.

Switching off

To put the TV set into standby mode, press the button on the remote control
or on the TV, the TV set remains powered up, but with low energy consumption.

To switch off the TV set, unplug the mains socket from the mains outlet.
Note: For some models,

press the power button to switch off the TV set .

11

Connections and Setup

Network Connection

Your TV will require an internet connection to operate all functions. Data usage

charges may apply.

Please refer to your Internet Service Provider (ISP) for additional information.

To access the internet, you must subscribe high speed broadband internet service from your internet service
provider.
Your TV can be connected to your home network in two ways:

• Wired, using the RJ45 (LAN) connector on the back panel.

• Wireless, using the internal wireless to your home wireless network.

Note: The following instructions are just t he usual ways to connect your TV to the wired or wireless

have any questions about your home network, please refer to your ISP(Internet Service Provider).

Rear of the TV

Router

Modem

TV

Wireless Router

Built-in wireless connection

or

LAN

Connecting to a wired network

To connect to a wired network:

Modem

Internet

1. Ensure you have:

• An ethernet cable long enough to reach your TV

• A router or modem with an available Ethernet port

• A high-speed internet connection

• An Ethernet (LAN) port on the back of the TV

2. Connect your ethernet cable to the router and to the
Ethernet port on the back of the TV.

3. Use the Network Settings

Connecting to a wireless network

To connect to a wireless network

1. Ensure you have:

•

A router broadcasting a high-speed wireless signal

•

A high-speed internet connection

2. Use the Network Settings

Note:

Some models may have no internal wireless module,
you can use wireless network by inserting external wireless
adapter into USB socket of the TV. Some external wireless
adapters can’t be compatible with the TV.

ESD regulation

This apparatus meets ESD performance criteria.
In case the apparatus does not recover in Ethernet
connection mode due to electrostatic discharge, user
interference is required.

12

Initial Setup

Initial setup involves selecting all the settings required
to be able to search for and store all the analogue & digital
channels you can receive.
Make sure that the television is switched on and follow
all the steps in turn specified hereafter.

Note:If the channel search retrieved only the analogue
channels it could be caused by poor broadcasting a nd
th erefore is not coverd b y manufacturer w arran ty .
Manufactu rers cannot be h e ld responsible for
lack of or poor broadcasting in some areas.

Connections and Setup

4. Press ▲/▼ to select your location, then press OK
to enter the next step.

Initial Setup

Initial Setup

Environment

Environment

Please select your location:

Please select your location:

Home

Home

Shop

Shop

Shop with demo

Shop with demo

1

1

2 3 4

2 3 4

5 6

5 6

wizard opens, which guides you through the initial
setup process.

Step 1: Enviroment

1. Press ▲/▼ to select your language, then press OK
to enter the next step.

Initial Setup

1

Environment

Please select your language:

English

Select Next

2. Press OK to confirm Tems and conditions, then enter
the next step.

Terms and Conditions

The contents and services (collectively the “Licensed Application”)

made available to you through this TV set (this “Device”) are licensed, not

sold, to you for use only under these terms and conditions. The providers
of the Lisensed Application (each an “Application Provider”) reserve all
rights not expressly granted to you.

1.Scope of License
The license granted to you for a Licensed Application by the relevant
Application Provider is limited to a non-transferable license to use the
Licensed Application on the Device that you own or control.You may not
distribute or make the Licensed Application available over a network
where it could be used by multiple devices at the same time.You may not
rent, lease, lend, sell, redistribute or sublicense the Licensed Application.
You acknowledge and agree that all Licensed Application and all
to Application Provider and are accessible through this Device belong
property laws. You may not modify, copy, decompile, reverse engineer,
disassemble, republish, upload, post, transmit, translate, attempt to devive
the sourse code of, create derivative works of, or othervise exploit any

3. Press ▲/▼ to select your country/region, then press

3. Press ▲/▼ to select your country/region, then press OK
to enter the next step.

to enter the next step.

Environment

Please select your country/region:

Polynesia
Georgia
Ghana
India
Indonesia

Next

OK

Initial Setup

1

Select Next

2 3 4

2 3 4

5 6

5 6

13

Back Select Next

Back Select Next

Home Mode:You Would be able to view the standard
settings for Picture and sound modes.
Shop Mode:You can enjoy enhanced setting for Picture
and Sound modes.
Shop with demo:Vendor mode, which is used to
display eSticker.

Note:Picture menu settings will not be accessible
when you select Shop Mode.

Step 2: Network setup

1. Press ▲/▼ t o select your network connection
type(Wired or wireless), then press OK to enter the
next step.

2. Follow the guides on the screen and press the
corresponding buttons on the remote control to
proceed.

Note: You can a ls o skip this step and step
3 by selecting "I do not have a network connection",
and connect to the internet later. For details
please refer to section Network Connection.

1 3 4

Network Setup

Please select your network connection type:

Initial Setup

2

Wireless

Wired

I do not have a network connection

Back Select Next

5 6

Step 3: Software Update

1. If the TV set has connected to the network
successfully, it will sea rch for u pgrade files
automatically.

2. Follow the guides on the screen and pr ess the
corresponding buttons on the remote control to
proceed.

OK

OK

Select

Back

▲

Connections and Setup

1 2 4

Software Update

Congratulations,your software version is the newest!

Initial Setup

3

Press the Right Button to continue

Back Next

5 6

Step 4: Channel installation

1. Press ▲/▼ to select Continue to install channels.

2. Follow the guides on the screen and pr ess the
corresponding buttons on the remote control to
proceed.

Note: To prevent the channel installation
process from being interrupted, wait for the
message indicating that the installation is
complete. You can als o skip this step by
selecting "I don't want to scan".

In this case, to search and store your channels

you may do an automatic channel search by
follwing th e instructions in the next section
Performing an automatic channel search.

1 2 3

Channel Installation

Please select Antenna scan type.

Initial Setup

4

Digital & Analogue

Digital

Analogue

I don’t want to scan

Back Select Next

5 6

Step 5: Clock setup

If the TV set is not connected to the network, you
can use the numeric buttons to enter the date and
time, then select the OK button and press OK to
confirm.
when the inital setup is completed,the Congratulations
message appears,press confirm.

1 2 3

4 6

Clock

Please set Date and Time:

Date

Time

0-9

0-9 Select

Initial Setup

5

01/01/2018

06:47:35

OKCancel

OK

OK

14

OK

OK

Select

Back

▲

Using your TV

Accessing channels

Using the numeric buttons: press the corresponding
numeric buttons on the remote control to access the
channels.
Using the buttons: press the buttons on
the remote control or the corresponding buttons on the

CH /

CH /

TV set to scroll through the channels.

Watching connected devices

Press AV or HOME on the remote control.
Press ▲/▼ or
and then press OK to confirm.

/ to select your desired source,

Source

TV

TV

AV

HDMI 1

HDMI 2

Media

Volume

Volume control : press the VOL +/ - buttons on the

remote control or the corresponding buttons on the TV
set to increase or decrease the volume.
Sound mute: press the
the sound. Press this button again or the vol + button

button to temporatily mute

to restore the sound.

Using System Settings

1. Press MENU on the remote cont rol to displ ay its
options: Picture, Sound, Channel, Smart TV,
Network, System and Support.

2. Press ▲/▼ to select the desired item, then press
OK to enter the corresponding submenu.

3. In submenus , press ▲/▼ to s elec t menu
options, then press OK to enter the option list,
the adjustment interface, or the corresponding
submenu.

4. Press

5. Press EXIT to close the menu.

N ote: You can also press MENUon the remote

to return to the previous menu.

control, select Settings (i f available) an d
press OK to enter the Settings menu. Some
options may not be available for certain
signal sources.

Picture

The menus for adjusting the picture are used to obtain
the best picture settings according to your preference,
the type of program you are watching and the ambient
lighting.

Picture preset Standard >

Picture

Backlight

Brightness 50

Sound

Contrast

Saturation 50

Channel

Tint 50

Sharpness 50

Smart TV

Color temperature Normal >

Network

Auto format On >

Screen mode

System

Overscan On >

Micro Dimming Off >

Support

Advanced settings

Picture reset

Select MENU > Picture , then the Picture menu
appears on the right with the following options. Press ►
to enter and use ▲/▼to choose an option.

Note: Some options may not be available for certain
modes. Some options may appear in the next page of
the Picture menu, you can press

Picture preset: Use ◄/► to scroll through the picture

preset settings:Standard, Dynamic, Natural, Movie,
Stadium and Personal.
Backlight:Adjusts the brightness of the back light,
depending on room lighting.

Brightness:Adjusts the brightness of the picture.
Contrast:adjusts the difference between light and dark

areas of the picture.

Saturation:Adjusts the richness of color.
Tint:Adjusts the balance between the red and green

levels.
Sharpness:Adjusts the crispness of the edges in the
picture.
Color temperature:Adjusts the color temperature
of the picture.Use ◄/► to scroll through the color
settings: Cool,Normal,Warm and Custom.
Auto format: Enables/disables the aspect ratio
selection automatically.

Screen mode: Use ◄/► to select the picture size.

Note:You are recommended to use the full screen mode.
Do not use the display mode with black bars on both
sides of the picture (such as 4:3) for a long time,
otherwise the TV screen may be damaged permanently.

Overscan: Set Overscan function to On or Off.

Micro Dimming:Automatically adjust the contrast function.

100

100

16:9 format >

▲/▼ to switch.

.

15

Using your TV

Advanced settings: Press OK to display its submenu.
Use

▲/▼

to select the items.

Note: The options offered depend on the program
you are watching.

Advanced settings

Picture

Dynamic contrast On

Black stretch

Sound

Flesh tone

Color extender

Channel

Gamma 0

RGB mode

Smart TV

Game mode Off

Network

MPEG NR

Noise reduction Low

System

Film mode On
HDMI mode Auto

Support

Picture freeze Off

Off

On

On

Off

Low

Dynamic contrast:Advanced technique for contrast
enhancement.
Black stretch:You can use the Black stretch feature to
correct the contrast balance in the black areas of the
picture.

Flesh tone:Enhance flesh tone.
Color extender:Enhance color for picture.
Gamma:Adjust gamma of picture.
RGB mode:Make the picture Red, Green or Blue.
Game mode: Enhance the picture quality to match

gaming environment.

MPEG NR:Reduction of picture bulk and mosquito noise.
Noise reduction:Reduces the noise level content in the

picture.
Film mode:Enhance the picture quality to smooth out
frame transitions while watching a video.

HDMI mode:Use to scroll through the HDMI mode

settings:Auto,Graphic,Video.(Only in HDMI source)

◄/►

Picture freeze:Freeze the picture.

Note:The options offered depend on the program
you are watching.

Picture reset:Select to reset the picture settings to
the factory default.

Sound

Select MENU > Sound , then the Sound menu
appears on the right with the following options.

► to enter and use ▲/▼ to choose an option.

Press

Sound preset Standard >

Picture

100Hz 50

500Hz 50

Sound

1.5KHz 50

5KHz 50

Channel

10KHz 50

Balance 0

Smart TV

Auto volume control Off >

Network

SPDIF type PCM >

SPDIF delay 0

System

Audio delay 0

TV placement Desk top >

Support

Advanced settings

Note: Some options may not be available for certain
signal sources. Some options may appear in the next
page of the Sound menu, you can press

▲/▼ to

switch.

Sound preset : Press OK to display the option
list. Use ▲/▼ to select a sound type from the list:

Standard,Stadium,Personal,Music,Movie and Voice.

Balance: Adjusts the volume between the left and
rightspeaker. Sets to “0 ”in the normal condition.

Auto volume control: Select On mode to reduce the
annoying blasts in volume during commercial breaks
and also

softer sounds in program material.

Eliminates the need to constantly adjust the volume.
SPDIF type: Connect to an audio device through the

SPDIF output. Select SPDIF type and press OK/
display the options. Select a proper sound type from the
list for digital programs.

- If the current program outputs sound in Auto
then either PCM or Auto can be selected.

- If the current program does not output sound in

Auto format, only PCM can be selected.
Otherwise no sound will be output.

Note: The options you may choose depend on the
program you are watching. If you select PCM and the
sound output is ahead of the picture, you can select
SPDIF delay from the Sound menu and press ◄/►
to adjust the delay time to synchronize the sound
the picture.

SPDIF delay: If the sound output does not match the
picture,press to adjust the delay time to synchronize

◄/►

the sound with the picture.

Audio delay: If the audio output does not match
the picture, press ◄/► to adjust the delay time to
synchronize the sound with the picture.

TV placement: Use ▲/▼ to balance the sound between
Desk top and Wall mount.

Advanced settings: Press

▲/▼

to

Use

choose an option.

Picture

Sound

Channel

Smart TV

Network

System

Support

Advanced settings

Audio language

Audio description

Volume

Speaker Volume 30

OK/►

to display its submenu.

English

On

Note: The options offered depend on the program you
are watching.

Audio language:Select your desired Audio Language.

Audio description:

Use

▲/▼

to

Press

choose an option.

OK/►

to display its submenu.

► to

format,

with

16

Using your TV

Volume: Turns the TV Volume On or Off.
Speaker Volume: Adjust the TV Volume level.

Channel

Select MENU > Channel,then the Channel menu
appears on the right with the following options.
Press

► to enter and use ▲/▼ to choose an option.

Picture

Channel scan

Channel list

Sound

EPG

Channel organiser

Channel

Channel diagnostics

Smart TV

Timeshit Off >

Subtitle

Network

Teletext

PVR

System

Support

Channel scan:Press OK to display channel scan
options.

Country:Press OK/► to display the country list and
use ▲/▼ to select your country.Enter the default

password 1234 or your own password in case
you have changed the password in the System >

Lock menu. Press ▲/▼ to select your country and

press OK to confirm
Tuner Mode:Select Antenna or Cable option according

to your actural use. (Note: the Cable option may not be
available for certain model.)

Automatic Search:Select Digital & Analogue(or
Digital or Analogue),then press OK to start the
automatic search process. The search may take a
few minutes. During the process, you can press OK
to abort halfway.

Automatic update: Press OK/► enter Automatic

Update channel.
Analogue Manual scan:Press OK to enter the
interface. Press

▲/▼ select Frequency and press OK to search,

fine tune or store the channel.
Antenna Manual Installation:Allows you to start

manual searching the available channels from the
current frequency or any frequency you input.(Only
for digital channels). Press OK to start search from
the current frequency,or input a frequency and then
press OK to start search.During the process,you can
press OK to abort halfway and press OK to restart,or
press to return.

Clean Channel List: Allows you to remove all the
searched channels from the channel list.

Channel list: Press OK to display channel list./►

EPG:Press OK/►enter Program Guide menu,For those

functions, you might operate them following the directions
on screen.(on digital TV channels)

/►

/

►

◄/► to select your system,the press

Channel organiser:You can skip channels, sort channels,
edit channels,or delete channels, Press OK to enter. /

Channel skip:If a channel is stored twice or its

►

reception is poor, you can simply skip it. The skipped
channels will no longer be selected by pressing the
Channel UP /DOWN button. Press OK to
display Channel skip menu,press to select a

▲/▼

/

►

channel and press OK to check the box.

Channel sort:

Options include Channel swap,
Channel insert
Channel edit: Press OK/► to display Channel list.
press ▲/▼ select a channel you want to edit,then
Press OK to enter.Press ▲/▼ to select channel
name,the press OK to access the virtual keyboard
and edit the channel name,finally highlight OK and
press OK to confirm.When you have finished,press

to return.

Channel delete:Press OK/

► to display channel list.

Press ▲/▼ to select a channel you want to delete,

the press OK to delete the channel.

Channel diagnostics (on digital TV channels)

Press OK/► to display some signal information
on current digital channel, such as signal strength,
Frequency, etc.

Time shift:Set Time shift to On or Off.
Subtitle:this enables subtitle for digital TV channels.
Select Subtitle,press OK/

Subtitle: press OK/

► to display its submenus:

► to enter, press ▲/▼ to turn On

or Off the subtitles. When Subtitle is set to On, you
can enable subtitle languages on digital TV channels:

1. Press ▲/▼ to select Digital subtitle language.

2. Press OK/

► to enter, press ▲/▼

to select a

subtitle language as your preferred language.

3. Press ▲/▼ to select Digital subtitle language
2nd.

4. Press OK/

► to enter, press ▲/▼ to select a

secondary subtitle language.

5.

Press

6. Subtitle type: press OK/

to return to previous menu.

► to enter, press ▲/▼

to select a subtitle type. You can select Hearing
impaired to display the hearing impaired subtitle

with your selected language.

Teletext: press OK/

► to display its submenu.

Decoding page language: select a proper type of
language in which Teletext will display.

Digital teletext language: for digital TV channels,
your TV could zap to a service with multiple initial
Teletext pages in different languages. This function
allows you to select an available language as primary
language which relates to different initial Teletext page.

PVR:Press OK/►enter PVR menu,For those functions,

you might operate them following the directions
on screen.(on digital TV channels)

17

Using your TV

Smart TV

Select MENU > Smart TV, then the Smart TV menu
appears on the right with the following options. Press

► to enter and use ▲/▼ to choose an option.

Share&See Off >

Picture

Smart TV policy

Sound

Networked standby

Netflix settings

Channel

Reset smart TV

Smart TV

Network

System

Support

Share&See:

By connecting the TV and a device (computer,
smart phone, pad, etc.) to the same local network, you
can enjoy the music, videos and pictures shared by the
device on the TV.

Smart TV policy

1. Press MENU

on the remote control, select Smart TV

and press OK to enter.

2. Select Smart TV policy and press OK to enter.

Networked standby:

Set Networked standby function to On or Off.

Press OK to display the option list. Use ▲/▼ to select

.

Reset smart TV

Allows you to reset the smart TV to factory default
settings.

1. Press MENU on the remote control, select

Smart TV > Reset smart TV

enter.

2. Press

/ to select OK and press OK

Network

Your TV is equipped to be connected to your home

network wirelessly. To do that you need a wireless

router or modem.

Internet connection

Picture

Interface

Sound

Wireless settings

Information

Channel

Connection test

Smart TV

Network

System

Support

Off >

Deactivate, ESN,

and press OK to

On >

Wireless >

Select MENU > Network, then the Network menu
appears on the right with the following options. Press
► to enter and use ▲/▼ to choose an option.

Internet connection:

1. Select Internet connection and press OK to enter.

2. Press ▲/▼

to select On and press OK

Interface:

1. Select Interface and press OK to enter.

2. Press ▲/▼ to select Ethernet or Wireless and
press OK

• Ethernet

IP settings:

Select IP settings and press OK to enter. You can
set Address type to Auto or Manual.

• Select Auto if you want the TV to acquire and

enter the needed IP address automatically.

• Select Manunal if you want to enter your IP

address manually, then:

-

- Enter the IP address. Subnet mask, Default
gateway, Primary DNS and Secondary DNS
values. Use the numeric buttons to enter
numbers and the ▲/▼/

• Once IP setting is completed, press ▲/▼ to
select OK and press OK to confirm. The set
will try to connec t to the network and inform
you about the result. Press

Network menu.

Wireless settings:

MENU >

Select
settings to connect to a wireless network. You can
set the wireless network connection in 3 ways:

Network, then select Wireless

1. Scan: Select Wireless settings > Scan, then
press OK, the TV will scan all access points
within range. The access points found by the
TV will be displayed. Select an available access
point, then press OK to connect the TV to it.

Notes:
If you select a protected access point, you will

have to enter the corresponding password.
Press OK on the remote control to display
virtual keyboard to enable you to enter it.

This set has a memo ry function of available
access points, which enables your set to be
connected to the network even if you switch on
TV after power off.

2. Manual:

Select Wireless settings > Manual,

then press

OK

, you will be prompted to enter the
correct SSID of an available wireless router to set
up the

connection.

/ buttons to move

to return to the

18

Using your TV

3. A u to:

If your AP(Acce ss Point) s upport s
WPS(WiFi Protec ted Setup), you c an connect
to the network via PIN(Personal Identification
Number) or PBC(Push Bu tton Configurat ion).

WPS will automatically configure the SSID and
WPA key in either mode.

Select Wireless settings > Auto and press

OK

to enter.

• PIN: Select PIN and press OK to enter. Choose
a random PIN code. Make sure this code is
installed on the AP. (For the procedures, refer
to your router manual.) Select OK and press
OK to set up the connection.

• PBC: If your router has a PBC push button,
select PBC an d press OK to enter. Press
the PBC push button on your router within 2
minutes before you select OK and press OK
again. Your TV will automatically acquire all the
network setting values it needs and connect to
your network.

Information:

Select Information and press OK to enter. You will
check the information on current connection, such
as Interface, Address type, IP address, etc., press

to return to the Network menu.

Connection test:

Select Connection test and press OK to enter. You
will check the Internet connectivity.

System

Select MENU > System , then the System menu
appears on the right with the following options. Press

►to enter and use ▲/▼ to choose an option.

Menu language

Picture

Timer

Sound

Lock

Input settings

Channel

Location Home >

T-Link Off >

Smart TV

Auto source On >

Network

Sports mode Off >

Instant power on On >

System

Restore Factory Default

Support

Menu language:Press OK / ► to enter and use ▲/▼ to

choose an option.

Language:Select your desired OSD Language.

•

Preferred audio Language:Select your desired

•

Preferred audio Language.
Preferred audio Language 2nd:Select your desired

•

Second Preferred audio Language.

Timer: The Timer menu allows you to set the time
zone on your TV set, to program an automatic turn-off
or wake-up timer .
Select System > Timer and press OK
Timer options are as below:

• Time zone: Use ▲/▼

to select the local time

zone.

• Clock: Press OK to display its options:
Auto Synchronization: Use ▲/▼ to select on

or off Manual. If on is selected, the TV will get
the time automatically cannot be adjusted. If
you select Manual, you should set date and
time at Date and Time item.Highlight Date or
Time,then use 0-9 buttons to change the date
or time.

Note:
Time option will not be memoriz ed when
turning on the TV next time, and the TV 's
time will start from the default.

• Power on timer: Use ▲/▼ to select O nce,
Daily or Off. If you select Once or Daily, you
should set a time period after which the TV
automatically switches to on at Time below
this item. Highlight Time,then use 0-9 buttons
to change the time.

• Power off timer: Use ▲/▼ to select Once,
Daily or Off. If you select Once or D

aily, you
should set a time period after which the TV
automatically switches to off at Time below
this item. Highlight Time,then use 0-9 buttons
to change the time.

• Sleep timer: Sets a period of time after which
the TV set goes into standby mode. Use ▲/▼
to set the period (120 minutes maximum). To
disable this function, select Off.

• Auto standby: Sets a period of time after which
the TV set goes into standby mode. Use ▲/▼
to set the period. To disable this function, select

Off.

Lock: This menu can control the special function for

TV channels.

Note: You must enter your personal code before
entering the Lock menu.

Select System > Lock and press OK
Then press remote number keys to enter password
to enter lock menu.

The factory

default code is 1234.

And the super password is 0423.
If you forget your code, enter it to override any existing
codes.

19

Using your TV

The Lock options are as below:

• Channel lock: This option allows you to lock a
certain Channel. Use ▲/▼ to select a certain TV
channel you want to lock, then press OK to lock.
To unlock, use the same operation.

• Parental rating: limits the age watching TV.
Options include None,4,5,6,7,8,9,10,11,12,13,14,
15,16,17,18.

• Input lock : This option allows you to lock a
certain external source you want to lock. Press
OK to display Input lock menu, then press ▲/▼
to select a certain external source you want to
lock, and press OK to lock. To unlock, use the
same operation.

Note: when the current input is locked, you can
press OK and enter the password to enter.

• Front panel lock: Press ▲/▼ to select On to
lock the set's buttons.

• Inst allation lock: Press ▲/▼ to select O n

to prevent access to the Installation menu to
prevent any channels from being set up without
your consent.

• C hange password: This option allows you to
change the password. Press OK to enter,and
enter the new password twice.

• Max volume: Press OK to display the adjustment
bar and use ◄/► to set the max volume when
watching program.

• Clean all: Press OK to enter, use ◄/► to set
OK, clear all settings.

Input Settings : Select System > Input Settings,
press OK to enter. User can select the device name of
the input source here, easy to identify the source.
Location:Use

▲/▼ to select Home,Shop and Shop

with demo,and press OK to confirm.
T-Link:Enter to activate sound out function.

Auto source: Press OK to enter, press ▲/▼ to turn
On or Off the auto source, and press OK
Sports mode:Enhance the picture quality of moving
picture.
Instant power on: Press OK to enter, press ▲/▼
to turn On or Off the instant power, and press OK to

Restore Factory Default : Allows you to reset the TV to

factory default settings.

Note : The default password is 1234.

Support

Select MENU > Support , then the Support menu
appears with the following options. Press ► to enter
and use ▲/▼ to choose an option.

Software update

Picture

Sound

Channel

Smart TV

Network

System

Support

Software update: Select Support > Software update,
press OK to enter. You can update software by USB,
by network or by channel.

• By USB: Enables you to install the latest version
of the software from your USB ports if available.
Select By USB and press OK to enter. Follow
the on-screen inst ructions to continue your
installation.

• By network: Enables you to download and
install the lat est software version from t he
Internet. Make sure to set up a wired or wireless

and press OK to enter. Follow the on-screen
instructions to continue. When new-version
software is available, a progress bar appears.

black and upgrade the software.

Note: Do not switch off or unplug the TV until
the upgrade is completed. Keep successful
network connection during upgrade.

• By channel: Enables you to download and
install the lat est software version from t he
channel.Select By channel and press OK/ to
enter.(It is only available in DTV mode.)

-Use ◄/► to select Yes under Au to download to
automatically download the latest software if available.
After the software has been downloaded successfully,
you will be prompted to decide if you want to install
it right now. If yes, follow the on-screen instructions
to complete your installation. You can also select to
ignore the installation here.

-Select “ No” under Aut o download to decline
th e automatic download.

-Select Manual download and press OK to start manual
scanning the latest software. Follow the on-screen
instructions to complete. During the scan, press OK/
EXIT to cancel or exit the process.

og lliw VT eht ,sehsinif daolnwod eht nehW

20

Source

Using your TV

HOME Page

Press “Home” key on the remote control to enter
into Home Page.

Option

Source

Source Option

Source:If you select this icon and press OK key on
the remote, it will show the list of input source. You
can select and enter into the source you want to enter.

Option: Press this icon to open the Option menu.
This Option menu includes features like Enjoy Music,
Sleep timer, World Clock, Soundbar ready, PVR and
Sports mode. You can select and Press OK key of
remote to use this options.

Netflix: Press this icon to enter into Netflix application.
Netflix is a streaming service that allows user to watch
a wide variety of award-winning TV shows, movies,
documentaries and many more.

Prime Video: Access various Amazon Prime Originals
as well as other popular movies and TV shows.

Firstly,please select <Sign In> or <Settings =>your
device> to register your Sanyo TV with your Amazon
account on your TV device or the Amazon website.

You can use bellow buttons on remote control while
playing videos:

/

/

YouTube: Press this icon to enter into YouTube
application. Browse this application to watch a wide
variety of online videos.

App Store: You can select and Press OK to enter into
App store. This will allows you to enjoy internet
Applications for your TV.

Fast Cast:An app that quickly delivers mobile content
to TV,allowing users to quickly deliver multimedia
content such as photos,videos,music and more to TV
terminals. Fast Cast Step:

1.Download Fast Cast mobile App.

2.Mobile and TV are connect the Same Wi-Fi.

3.Search device and connect TV.

Note:

1.This function may be unavailable for some mobile
devices, and it subject to chipset support the files format.

Play /Pause
Fast Backward \ Fast Forward

To stop the video

2.Recommendations of working environments:

A: Local Area Network Speed recommendations on:

1M/S~2M/S.

B: Applicable files :4K video Definition shall be 30fps;

Below 4K definitions no limited.

C: Files required:MP4、AVI、TS、FLV、f4v、m3u8

(subject to chipset supported).

Wireless Display: Mirror your android device onto your
Smart TV screen in high definition along with audio Steps

1. Go to your cast function/option

2. Search for TV_****

3. Enjoy the seamless experience

Note:- Wireless display creates its own Wi-Fi range, thus
it will disconnect from your home Wi-Fi. After exiting the
app please give your Smart TV few seconds to again
automatically connect to your home Wi-Fi.

- Some of smart phone versions are not supported due
to different technology platforms.

Note:TV supports wireless display but does not
guarantee successful connection with all devices.

Browser: Press this icon to enter into Brower
application. This will allows you to browse the web
pages you like.
Note:- If current page is not fully opened then please
allow progress to complete the loading.Some pages &
websites may not be compatible with due to unsupported
plug-in.We recommend a good high speed internet
connection for better accessing of websites, watching
Videos & more.

- Some web pages & websites may not be compatible
with browser. For Ex. Login to popular web sites, credit
card payments, etc

Hungama:Get access to over 6500+ movie titles
covering the biggest banners in Bollywood and the
very goog Indian regional cinema. Watch them in both
HD and SD video quality, anytime, anywhere only with
Hungama.

BAE BLE Muzic : Baeblemusic is the leading online
destination for live shows, videos, and commentary from
the music scene. Baeble has an ever growing library of
exclusive full-length concerts, intimate in-house sessions,
and video interviews from today's buzziest artists.

YUPPTV:Watch your favourite Indian TV channels.

Bollywood:Press this icon to enter into Bollywood.

This will allows you to enjoy the variety of online video’s.
Note: Changes in application may be made without
prior notice to the customer.

Tunein Radio: Press this icon to enter into Tunein
Radio. Tunein Radio is an Internet-based music
streaming service. It allows users to listen to variety of
music content available.

21

Using your TV

Multimedia

You can also select Media input by selecting input AV button.
In USB state, if no USB device connected, the USB
interface will be displayed.

Picture:

1. Select Picture icon, then press OK button to enter the
USB device.

2. Press Up, Down, Left or Right direction button to select
your desired picture file and press OK to show.

3. While showing picture, press OK key of remote to display
the play console.For the Play console,you might operate
them following the directions on screen.

4.Press Return key of remote to Stop playing.

Video :

1. Select Video icon, then press OK button to enter the USB
device.

2. Press Up, Down, Left or Right direction button to select
your desired file and press OK to Play.

3. While playing a Video, press OK key of remote to display
the play console. For the Play console, you might operate
them following the directions on screen.

4. Press Return key of remote to Stop playing.

Music :

1.Select Music icon, then press OK button to enter the USB
device.

2.Press Up, Down, Left or Right direction button to select your
desired file and press OK to Play.

3.The Play console includes Fast Backward, Previous,
Play/Pause, Next, Fast forward Repeat and List icons. Use
Left & Right key of remote to navigate on the Play console.

4. Press Return key of remote to Stop playing.

Notes:

1. Under the following conditions, this system cannot
decode the file and the file cannot be play normally:

-The parameters of file, such as the pixel of picture,
code rate of audio and video file, sampling rate of
audio file, exceed the limit of the system;

-The format of file is not matched or the file is harmed.
Note: The code rate of this system does not support
exceed 20Mbps.

2. Hot plug: Do not disconnect when the system is
reading or transmitting data, avoid damaging the
system or the device.

3. Pay attention to the power supply of the device when
you are using a mobile hard disk or a digital camera.
If the power supply is not sufficient or not stable, you
may encounter problems during operating or can not
operate at all. In this case, please restart the device,
or unplug the device and plug it again, and ensure that
its power supply is normal.

4. The system supports standard USB1.1,USB2.0 and
USB3.0 devices, such as standard U-disks, MP3
players,mobile hard disks, etc..

5. For obtaining better audio and video quality, It is
suggested to use the external device which accords
with USB2.0/USB3.0 standard.

6. When playing the video with high compression ratio,
these phenomenons, such as picture standstill and
menu long time response, are normal.

7. For some USB device with power supply, such as large
size hard disk, MP4, etc., Suggests using it with power
to avoid electric power shortage. The parameters of
file, such as the pixel of picture, code rate of audio and
video file, sampling rate of audio file, exceed the limit
of the system.

22

Supported file format in Media Player:

B

C
40

M

M

A

M

40

M

M

A

M

40

M

A

M

62

M

A

M

40

M

A

M

C

C
U

M

M
U

M

M

U

M

M

M

U

M

AA

M

Video :

Video cod ec Resolu on

MPEG1/2

1080P@30fps

it Rate Profile

Mbps MP@HL

Using your TV

ontaine r

PEG program stream (.DAT, .VOB, .MPEG)

P4 (.mp4, .mov)

VI (.avi)

KV (.mkv)

MPEG4

H.263

H.264

VC1

Audio :

Audio codec Sample rate

MPEG1/2

Layer1

MPEG1/2

Layer2

MPEG1/2

Layer3

-LC 8kHz~ 48KHz

AAC

AC3

Photo :

1080P@30fps

1080P@30fps

1080P@30fps

1080P@30fps

16KHz~48KHz

16KHz~48KHz

16KHz~48KHz

32KHz, 44.1KHz,48KHz

.jpg, .jpe g, .bmp, .png

Mbps .Simple Profile

Mbps

.5Mbps .Main Profile

Mbps .Advanced Profi le@Level 3

hannel Bit Rate

p to 2 32Kbps~448Kbps

p to 2 8Kbps~384Kbps

p to 2 8Kbps~320Kbps

p to 5.1

Up to 5.1

.Advanced Simple Profile@Level 5

.GMC is not support

.High Profile@Level 4.2

.Simple Profile

.Main Profile

32Kbps~640Kbps Music:

PEG program stream ( .MPG , .MPEG)

P4 (.mp4, .mov)

VI (.avi)

KV (.mkv)

P4 (.mp4, .mov)

VI (.avi)

KV (.mkv)

P4 (.mp4, .mov)

VI (.avi)

KV (.mkv)

PEG program stream (.MPG, .MPEG)

VI (.avi)

KV (.mkv)

ontaine r

usic:

P3 (.mp3)

usic:

P3 (.mp3)

usic:

P3 (.mp3)

P4 (.mp4)

usic:

C(.aac)

P4(.mp4)

AC3(.ac3)
MP4(.m4a)

23

Other Information

Troubleshooting

Most problems you encounter with your TV can be
corrected by consulting the following troubleshooting list.

No picture, no sound

1. Check if the fuse or circuit breaker is working.

2. Plug another electrical device into the outlet to make
sure it is working or turned on.

3. Power plug is in a bad contact with the outlet.

4. Check the signal source.

No color

1. Change the color system.

2. Adjust the saturation.

3. Try another channel. Black-white program may be
received.

Remote control does not work

1. Change the batteries.

2. Batteries are not installed correctly.

3. Main power is not connected.

No picture, normal sound

1. Adjust the brightness and contrast.

2. Broadcasting failure may happen.

Normal picture, no sound

1. Press the Vol+ button to increase volume.

2. Volume is set to mute, press the mute button to restore
sound.

3. Change the sound system.

4. Broadcasting failure may happen.

Unorderly ripples on the picture

It is usually caused by local interference, such as cars,
daylight lamps and hair driers. Adjust the antenna to
minimize the interference.

Blank screen when connected computer system

Perhaps the TV can not recognize the resolution set by
the PC. Suggest to change to the best resolution or other
standard resolutions of the Windows system.

Snowy dots and interference

If the antenna is located in the fringe area of a television
signal where the signal is weak, the picture may be marred
by dots. When the signal is extremely weak, it may be
necessary to install a special antenna to improve the
reception.

1. Adjust the position and orientation of the indoor/outdoor
antenna.

2. Check the connection of antenna.

3. Fine tune the channel.

4. Try another channel. Broadcasting failure may happen.

Ignition

Black spots or horizontal streaks appear, or the picture
flutters or drifts. This is usually caused by interference
from car ignition system, neon lamps, electric drills, or
other electrical appliance.

Radio frequency interference

This interference produces moving ripples or diagonal
streaks, and in some case, loss of contrast in the picture.
Find out and remove the radio interference source.

Declaration of Conformity with the requirements of the E - Waste (Management) Rules-2016

The Product is in conformity with the requirements of the reduction of hazardous substances

of the E-Waste Rules-2016

The content of hazardous substance with the exemption of the applications listed in SCHEDULE II

of the E-Waste Rules-2016

1. Lead (Pb) – not over 0.1% by weight;

2. Cadmium (Cd) – not over 0.01% by weight;

3. Mercury (Hg) – not over 0.1% by weight;

4. Hexavalent chromium (Cr

5. Polybrominated biphenyls (PBBs) – not over 0.1% by weight;

6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1% by weight.

Customer care number ( Toll free ) : 1800 419 5088

Please see the Sanyo website for further information on collection centers,etc.
or call the customer care toll-free number

https://www.sanyoappliance.in/e-waste-program/

This product incorporates the following software or technology:
(1) the software based in part on the work of the Independent JPEG Group,
(2) the software developed by the FreeType Project,
(3) the software licensed under the GNU General Public License Version 2 (GPL v2),
GNU LIBRARY GENERAL PUBLIC LICENSE Version 2(LGPL v2),
GNU Lesser General Public License Version 2.1 (LGPL v2.1)
and/or Mozilla Public License Version 1.1 (MPL v1.1)and/or,
(4) open sourced software other than listed above.

The open source softwares are distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY, without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
In addition, some open source softwares are copyrighted by several individuals
or entities.
Please refer to the terms and conditions of open source softwares and the copy
right notice of applicable copyright holder at support page of this product
(https://www.sanyoappliance.in).

resources,

6+

) – not over 0.1% by weight;

Sanyo

24

Specifications

Other Information

Model No.

Power Source

Power Rating

Power

Standby condition

Consumption

Visible screen size

panel

Number of pixels

Display

Dimensions (L x B x H)

Net weight

Gross Weight

Speaker

Audio output

Sound

TV System

AV IN

HDMI input

LAN

USB

XT-32A081H XT-43A081F

110 – 240 V ~ 50/60 Hz 110 – 240 V ~ 50/60 Hz

50 W

75 W

0.5 W 0.5 W

80 cm

108 cm

1,049,088 (1,366(W)x768 (H)) 2,073,600 (1920(W) x 1080 (H))

73.2cm × 18.2cm × 48.3cm
(With Pedestal)

73.2cm × 8.0cm × 43.2cm
(TV only)

4.3 kg Net (With Pedestal)

4.2 kg Net (TV only)

96.9 cm X 22.1cm X 61.8cm
(With Pedestal)

96.9cm X 8.5cm X 56.9cm
(TV only)

7.1 kg Net (With Pedestal)

7.0 kg Net (TV only)

6 kg 9.6 kg

66

16 W（ 8 W + 8 W）

PAL B/G,D/K,I; NTSC(AV);DVB-T/T2

AUDIO L - R

VIDEO

HDMI connector x 2

RJ45 x 1

USB 2.0 TYPE A Connector x 2
(DC 5 V, MAX. 500 mA)

RCA PIN Type x 2

RCA PIN Type x 1

66

20W ( 10 W + 10 W )

PAL B/G,D/K,I; NTSC(AV);DVB-T/T2

AUDIO L - R

VIDEO

HDMI connector x 2

RJ45 x 1

USB 2.0 TYPE A Connector x 2
(DC 5 V, MAX. 500 mA)

RCA PIN Type x 2

RCA PIN Type x 1

ANTENNA

Connection terminals

AUDIO OUT

SPDIF

Aerial connector x 1

AUDIO OUT (L - R) RCA PIN Type x 2

SPDIF x 1

Aerial connector x 1

AUDIO OUT (L - R) RCA PIN Type x 2

SPDIF x 1

Design and Specifications are subject to change without notice.Weight and Dimensions shown are approximate.

25