SANYO VPC-S3 Service Manual 00-08
SERVICE MANUAL
FILE NO.
Digital Camera
Contents
1. OUTLINE OF CIRCUIT DESCRIPTION .................... 2
2. DISASSEMBLY ........................................................ 10
3. ELECTRICAL ADJUSTMENT .................................. 12
4. USB STORAGE INFORMATION
REGISTRATION ...................................................... 17
5. TROUBLESHOOTING GUIDE................................. 18
6. PARTS LIST............................................................. 19
ACCESSORIES ....................................................... 19
PACKING MATERIALS............................................ 19
CABINET & CHASSIS PARTS 1 ............................. 20
CABINET & CHASSIS PARTS 2 ............................. 21
ELECTRICAL PARTS .............................................. 22
CIRCUIT DIAGRAMS &
PRINTED WIRING BOARDS ...................................... C1
VPC-S3
(Product Code : 126 677 00)
(Europe)
(PAL General)
VPC-S3
(Product Code : 126 677 01)
(U.S.A.)
(Canada)
(Korea)
(Taiwan)
PRODUCT SAFETY NOTICE
The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the part
designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
CAUTION : Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer’s instructions.
NOTE : 1. Parts order must contain model number, part number, and description.
Design and specification are subject to change without notice.
SX715/EX, U
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
REFERENCE No. SM5310581
Loading...