SANYO VPC-R1EX, VPC-R1E, VPC-R1, VPC-R1G, VAR-G5U CIRCUIT DIAGRAMS
...
CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS
TABLE OF CONTENTS
OVERALL WIRING & BLOCK DIAGRAMS
OVERALL WIRING C1
OVERALL CIRCUIT C2
CAMERA CIRCUIT C3
SYSTEM CONTROL CIRCUIT C4
LENS CIRCUIT C5
FLASH CIRCUIT
POWER SUPPLY CIRCUIT
CIRCUIT DIAGRAMS
CP1 BOARD (CAA) CAMERA C6
CP1 BOARD (CAB) MAIN, LCD DRIVER & LENS C7
CP1 BOARD (STA) FLASH & POWER SUPPLY C10
CP1 BOARD (SYA) SYSTEM CONTROL C13
MAIN & LCD DRIVER CIRCUIT WAVEFORMS C14
TB1 BOARD SWITCH
PRINTED WIRING BOARDS (P.W.B.)
CP1 P.W.B. (SIDE A & B) C15
TB1 P.W.B. (SIDE A & B)
NOTES:
1. All resistance values in "OHMS" unless otherwise noted.
(K=1,000 ; M=1,000,000)
2. All capacitance values in "
p=pico farad ;
3. All inductance values in "
µ ,u or U=micro farad
µF" unless otherwise noted.
µH" unless otherwise noted.
µ ,u or U=micro henry ; m=milli henry
PRODUCT SAFETY NOTICE
THE COMPONENTS DESIGNATED BY A SYMBOL ( ) IN THIS
SCHEMATIC DIAGRAM DESIGNATES COMPONENTS WHOSE
VALUE ARE OF SPECIAL SIGNIFICANCE TO PRODUCT SAFETY.
SHOULD ANY COMPONENT DESIGNATED BY A SYMBOL NEED TO
BE REPLACED, USE ONLY THE PART DESIGNATED IN THE PARTS
LIST.
DO NOT DEVIATE FROM THE RESISTANCE, WATTAGE AND VOLTAGE RATINGS SHOWN.
EXPLANATORY NOTES (EXAMPLES)
Resistor 10K:1/16J means 10kilo ohm
1M:1/10K means 1mega ohm
Capacitor 0.047:F means 0.047micro farad, Ftype.
Electrolytic capacitor
10:16 means 10micro farad, 16volt max.
Inductor 330:J means 330micro henry ±5%
470:K means 470micro henry
No description J or K means
±5%, 1/16watt max.
±10%, 1/10watt max.
±10%
±5%
PAL-C-EX
Loading...