SANYO VPC-R1EX, VPC-R1E, VPC-R1, VPC-R1G, VAR-G5U Notice
...
Notice
PRODUCTION CHANGECORRECTION
ADD INFORMATIONSERVICE FLASH
Please add this notice to the Service manual listed below.
FILE No.
Category : Digital Camera
Model Name Reference No. Destination
VPC-R1 SM5310265 U.S.A. & Canada
VPC-R1E SM5310265 U.K.
VPC-R1EX SM5310265 Europe & PAL general
VPC-R1G SM5310265 No Tax
VAR-G5U SM5310265 U.S.A. & Canada
VAR-G5EX SM5310265 Europe & PAL general
VAR-G5E SM5310265 U.K.
The reason of change.
A : Misprint B : Quality Reliability C : Standardization D : Design
E :
Deletion F : Addition
Page 18
4. USB STORAGE INFORMATION REGISTRATION
[OLD]
Preparation:
POWER switch: ON
Adjustment method:
1. Connect the camera to a computer. (Refer to 3-5. Connecting the camera to the computer on the page 14.)
2. Double-click on the DscCalDi128a.
3. Click on the Get button in the USB storage window and
check the USB storage data.
VID: SANYO
PID: VPC-R1 or VPC-R1E or VPC-R1EX or VPC-R1G
Serial:
Rev. : 1.00
4. Check the “Serial” in the above USB storage data. If the
displayed value is different from the serial number printed
on the base of the camera, enter the number on the base
of the camera. Then click the Set button.
5. Next, check VID, PID and Rev. entries in the USB storage
data. If any of them are different from the values in 3. above,
make the changes and then click the corresponding Set
button.
G : Multiple Use
[NEW]
Preparation:
1. Enter "usbmass" using all lower case letters to the CF card,
2. Set the CF card which is saved to the camera.
3. Insert the DC jack, and turn on the camera.
4. Turn on the computer, and connect the camera and com-
Adjustment method:
1. Double-click on the DscCalDi.exe in the DscCalDi128a.
2. Click on the Get button in the USB storage window and
3. Check the “Serial” in the above USB storage data. If the
4. Next, check VID, PID and Rev. entries in the USB storage
5. Close the DscCal after completing the USB storage infor-
6. Pull the DC jack to turn off the camera, and pull the CF card.
Date :Mar.18, 2002
and push the enter key. Next enter "end" using all lower
case letters, and save.
the 1st line usbmass
the 2nd line end
puter with USB cable. (Refer to 3-5. Connecting the
camera to the computer on the page 14.)
check the USB storage data.
VID: SANYO
PID: VPC-R1/DSC-R1
Serial:####******** (####: model name, ********: serial No.)
Rev. : 1.00
displayed value is different from the serial number printed
on the base of the camera, enter the
number on the base of the camera. Then click the Set button.
model name VPC-R1⇒R1U0 VPC-R1E⇒R1E0
VPC-R1EX⇒R1EX VPC-R1G⇒R1G0
data. If any of them are different from the values in 2. above,
make the changes and then click the corresponding Set
button.
mation registration.
model name and the
SB117/U, E, EX, EX2, SVA01/U, EX, E
126 293 00, 01, 02, 06 126 301 01, 02, 03
SANYO Electric Co., Ltd.
Osaka, Japan
– 1 –
Reference No. SM5310265-01
Loading...