
SERVICE MANUAL
FILE NO.
Digital Camera
Contents
1. OUTLINE OF CIRCUIT DESCRIPTION .................... 2
2. DISASSEMBLY .......................................................... 9
3. ELECTRICAL ADJUSTMENT .................................. 12
4. USB STORAGE INFORMATION
  REGISTRATION ...................................................... 16
5. TROUBLESHOOTING GUIDE................................. 17
6. PARTS LIST............................................................. 18
  CABINET AND CHASSIS PARTS 1 ........................ 18
  CABINET AND CHASSIS PARTS 2 ........................ 19
  ELECTRICAL PARTS .............................................. 20
  ACCESSORIES ....................................................... 25
  PACKING MATERIALS............................................ 25
CIRCUIT DIAGRAMS &
PRINTED WIRING BOARDS ...................................... C1
VPC-J1
(Product Code : 126 626 01) 
(U.S.A) 
(Canada)
VPC-J1EX
(Product Code : 126 626 02) 
(Europe) 
(PAL General)
PRODUCT SAFETY NOTICE
The components designated by a symbol (  !  ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the part
designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
CAUTION : Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer. 
Discard used batteries according to the manufacturer’s instructions.
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
SX711/U, EX
REFERENCE No. SM5310497