Sanyo VPC-CG11EX, VPC-CG11, VPC-CG11GX, VPC-CG11PX Quick Start Guide

STEP 3

VIEWING IMAGES

STEP 4

DELETING IMAGES

1

Press the REC/PLAY
button.

The last recorded

image is displayed.

2

Select the image to
play back.

Toggle the SET button

left, right, up or down
to move the orange
frame to the file you
wish to play back.

Press the SET button.

3

The image you

selected in step 2 is
displayed fullscreen.

If a video clip was

selected, playback
begins.

Did your photos turn out the way you hoped?

Even if you make a mistake, it’s easy to delete the
pictures you aren’t satisfied with. Unlike film cameras,
with a dual camera you can take all the photos you
want, keep the ones you like and delete the rest.

1

Display the image
that you want to
delete.

2

Toggle the SET
button up.



The Confirm Delete

Screen appears.

Select “DELETE”,

3

and press the SET
button.

The current image

is deleted.

To return to the

Playback Screen,
select “EXIT”, and

press the SET
button.

PREPARE THE BATTERY PACK INSERT THE CARD

Charge the battery pack

Use the supplied charger to charge the battery
pack.

Battery pack

Connector markings

CHARGE
indicator

The CHARGE indicator shows the battery pack charge status.

 Lights red during recharging.
 Turns off when battery pack is fully charged.
 The charging time is approx. 120 minutes.

Power cord

Raise

Insert the battery pack

1

Battery cover

While pressing, push
towards the bottom.

2

Open

4

Connector markings

Close

3

Insert by
matching the
connector
markings

 An SD Memory Card is not included with your

camera. Please purchase a commercially sold
card.

 In this manual, the SD Memory Card is

referred to as the “card”.

Monitor unit
1 Open

Card slot cover
2 Open

Card

3 Insert

4 Close