Sanyo VMC-7321PA, VMC-7314PA Instruction Manual

1

Do not allow anything to rest on the power cord. Do not locate

this monitor TV receiver where the cord will be damaged by peo­ple walking on it.

Do not overload wall outlets and extension cords as this can
result in fire or electric shock.

Slots and openings in the cabinet and in the back or bottom are
provided for ventilation to ensure reliable operation and to protect
it from overheating. These openings

must not be blocked or

covered. The opening

should never be covered with a cloth or

other material, and the bottom openings

should not be blocked

by placing the monitor TV receiver on a bed, sofa, rug, or other
similar surface.

Do not place this monitor TV or AC adaptor near any heat
sources such as radiators, heaters, stoves and other heat-gener­ating products (including amplifiers).

Do not place the monitor TV in direct sunlight.

Do not place your monitor TV receiver on an unstable stand,

shelf or table. Serious injury to an individual, and damage to the
monitor TV may result if it should fall. Your sales person can
recommend approved stands or shelf and wall mounting
instructions. A special wall mounting kit is available for this model.

If the monitor TV is built into a unit, or enclosed, the minimum
distances for ventilation must be maintained. Heat build up can
reduce the life of your monitor TV, and can be dangerous.

This monitor TV receiver should be operated only from the type of
power source indicated on the monitor TV or as indicated in the
Operating Instructions. If you are not sure of the type of power
supply in your home, consult your sales person or your local
power company.

Never add accessories that have not been specifically designed
for this monitor TV.

Do not drop or push objects into the monitor TV cabinet slots or
openings. Some internal parts carry hazardous voltages and
contact may result in an electric shock hazard.

Never spill liquids

of any kind onto the monitor TV receiver or AC adaptor.

Do not

place items such as vases containing liquid on top of the monitor
TV.

Do not expose the monitor TV receiver or AC adaptor to rain or
use near water. For example, near a bathtub, kitchen sink, in a
wet basement, etc.
Do not use immediately after moving the monitor TV from a low
temperature to a high temperature environment, as this causes
condensation, which may result in fire, electric shock, or other
hazards. Before cleaning, unplug the monitor TV receiver from the
wall socket.

Never stand on, lean on or push the moni­tor TV or its stand.

Never allow children to

play with the monitor TV or its stand.
Serious injury may result if it should fall.

Do not apply liquid cleaners or aerosol
cleaners directly onto the monitor TV
receiver. Only use a soft cloth for cleaning.

Do not place candles or hot objects upon
the monitor TV, next to it or behind it. Open
flames must never be used near the moni­tor TV set.

SAFETY

SAFETY

PRECAUTIONS

PRECAUTIONS

Installation

CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal

safety, but improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated
in this receiver observe the following basic rules for its installation, use and servicing.

Use

VMC-7314PA

VMC-7321PA

VMC-7314EA

VMC-7321EA

MINIMUM DISTANCES

10cm

20cm

10cm

5cm

2

SAFETY

SAFETY

PRECAUTIONS

PRECAUTIONS

Important:

This equipment is fitted with an AC Adaptor which has an approved non rewireable UK mains plug. To change a fuse in this type of plug
proceed as follows:

1. Remove the fuse cover and fuse.

2. Fit a new fuse which should be a BS1362 3Amp A.S.T.A. or BSI approved type.

3. Ensure that the fuse cover is correctly refitted.

If the fuse cover is lost or damaged the plug must

NOT be used but replaced with a serviceable plug.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug
contains a fuse, this should have a rating of 3 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the fuse at
the distribution board should not be greater than 5 Amp.

Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13Amp socket elsewhere.

The wires in this mains lead are coloured in accordance with the following code:

Blue -------> Neutral
Brown ----> Live

1.

The Blue wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.

2. The Brown wire must be connected to the terminal with the letter “L” or coloured RED.

3. Do not connect either wire to the earth terminal in the symbol or coloured GREEN or GREEN and YELLOW.

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the wires.

THIS UNIT IS NOT FULLY DISCONNECTED FROM THE MAINS UNLESS THE MAINS LEAD IS UNPLUGGED.

Your monitor television is fully transistorised and does not contain any user serviceable components.

You must not remove the rear cover of the monitor TV by yourself. The apparatus is working with high voltages and could damage
objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively
use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of original spare
parts can prevent fire, shock and other hazards.

Unplug the monitor television receiver from the wall outlet and refer servicing to qualified service personnel under the following con­ditions:

■ If the power cord or plug is damaged.

■ If liquid has been spilt into the monitor television receiver or AC Adaptor.

■ If monitor television receiver or AC Adaptor has been exposed to rain or water.

■ If the monitor television receiver or AC Adaptor has been dropped or the cabinet has been damaged.

■ If the monitor television receiver exhibits a distinct change in performance.

■ If the monitor television receiver does not operate normally by following the operating instructions.

Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage. This will
often require extensive work by a qualified technician to restore the monitor television receiver to normal operation.

Servicing

Important recycling information.

Your SANYO product is designed and manufactured with high quality materials and components which can be
recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately
from your household waste.

Please dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

Note: This symbol mark and recycle system are applied only to EU countries are not applied to other countries of the world.