Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Thick Film Hybrid IC
Vertical Deflection Output Circuit
for CTV and CRT Displays
Ordering number:ENN5017
STK792-110
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Overview
The STK792-110 is a vertical output amplifier and supply
switching circuit hybrid IC for high withstand voltage, vertical deflection output circuits in CTV and CRT displays.
Package Dimensions
unit:mm
4154
[STK792-110]
Applications
• Large screen, ultrahigh definition CRT displays
• Large screen CTV, HDTV and video projectors
Features
• Vertical deflection basic functions (output amplifier and
supply switching circuit) in a compact package
• Split dual supply DC amplifier , output amplif ier structure
• Supply switching circuit built-in, making low power
dissipatin operation possible
• High-current (4Ap-p), high withstand voltage (160V max)
output amplifier design
• Increasing the supply switching circuit supply voltage
enables the retrace time to be reduced (≤0.2ms)
• High-power design ideal for large-screen CTV and CRT
displays, and video projectors
• DC amplifiers for good DC component characteristics in
the sawtooth waveform for vertical centering correction
Specifications
Maximum Ratings at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatlovylppusmumixaM
tnerrucnoitcelfedmumixaMI
tnerrucrotcellocmumixaMI
ecnatsiserlamrehT
erutarepmetnoitcnuJjT 051
erutarepmetetartsbusgnitarepOcT 501
erutarepmetegarotSgtsT 521+ot03–
VCC4-84dna8snipneewteB 061V
V±
CC
o-p
C
θ 1c-j
θ 2c-j
5niP 0.2±A
11RT 0.2A
44.0
36.5
3.6
110
(6.82)
2.54
9×2.54=22.86
11rTrotsisnartgnihctiwsylppuS 51
0.5
9rTdna8rTsrotsisnarttuptuolacitreV 0.6
25.6
13.0
8.5
1.0
0.4
4.0
SANYO : SIP10
2.9
03±V
˚C/W
˚C/W
˚C
˚C
˚C
O2099TH (KT)/61995HA (ID) No.5017–1/5
STK792-1 10
Electrical Characteristics at Ta = 25˚C, ±VCC=20V, VCC8=120V
retemaraPlobmySsnoitidnoC
tnerrucgnilidII
egatlovlartueNV
)rewol(egatlovnoitarutastuptuonoitcelfeDV
)reppu(egatlovnoitarutastuptuonoitcelfeDV
egatlovnoitarutastiucricgnihctiwsylppuSV
7 5103Am
OCC
505–05+Vm
N
4-5A1.1+=5I,4dna5snipneewteB2.20.3V
tas
5-6A1.1+=5I,5dna6snipneewteB0.10.2V
tas
6-8A1.1+=8I,6dna8snipneewteB0.10.2V
tas
Block Diagram
sgnitaR
nimpytxam
tinU
Equivalent Circuit
No.5017–2/5
Sample Application Circuit (1)
STK792-1 10
TR1 2SA1209 R1 2.7kΩ C1 22µF/16V
TR2 2SC2911 R2 4.7kΩ C2 1000µF/35V
D1 DS442 R4 1.8Ω/1W C4 0.0022µF
D2 DS442 R5 680Ω/12W C5 1000µF/35V
D3 DS442 R6 1.1Ω/1W C6 100µF/50V
D4 DS442 R7 2.2kΩ C7 22µF/160V
D5 DFC15 R8 1.8Ω/1W C8 1µF/160V
D6 DS442 R9 470Ω/2W C9 22µF/50V
R3 4.7kΩ C3 100µF/50V
R10 10kΩ
R11 10kΩ
R12 3.3kΩ
R13 10kΩ
No.5017–3/5
Sample Application Circuit (2)
STK792-1 10
TR1 2SC2911 R1 2.7kΩ C1 22µF/16V
D1 DS442 R3 4.7kΩ C3 100µF/50V
D2 DS442 R4 1.8Ω/1W C4 0.0022µF
D3 DS442 R5 680Ω/12W C5 1000µF/35V
D4 DS442 R6 1.1Ω/1W C6 100µF/50V
D5 DFC15 R7 2.2kΩ C7 22µF/160V
R2 4.7kΩ C2 1000µF/35V
R8 1.8Ω/1W C8 1µF/160V
R9 470Ω/2W
R10 4.7kΩ
R11 4.7kΩ
R12 10kΩ
No.5017–4/5
STK792-1 10
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of October, 1999. Specifications and information herein are subject
to change without notice.
PS No.5017–5/5
Loading...