Page 1
Ordering number : ENN6356
SPM3252
GaAs MMIC
SPM3252
SPDT Switch
Features and Applications
•
Control voltage +3 / 0V.
• Miniature mold package.
• Low loss and high linearity by adopting χ-structure,
thus allows this device to be best suited for input /
Package Dimensions
unit : mm
1273
[SPM3252]
output power.
Application Circuit
CTL -- RX
ANT
CTL -- TX
( Zo = 50Ω)
RX
TX
0.4
6
0.95 0.95
1.9
2.9
4
31
0.6
1.6
0.6
0.8
2.8
1.1
0.16
0 to 0.1
1 : CTL--RX
2 : ANT
3 : CTL--TX
4 : TX
5 : GND
6 : RX
SANYO : CP6
Specifications
Absolute Maximum Ratings at T a=25°C
Parameter Symbol Ratings Unit
Control Voltage V
Storage T emperature T stg −55 to +150 °C
Operating T emperature T opr −20 to +70 °C
CTL
5V
Electrical Characteristics at T a=25°C
Parameter Symbol Conditions
Insertion Loss
Isolation
VSWR f=1.9GHz 1.4 2.0 --
Switching Time T sw 20 ns
Pol dB
Marking : MH
CTX--TX CTL--RX
+3V 0V TX ➝ ANT
0V +3V ANT ➝ RX
TX -- ANT f=1.9GHz 0.6 0.9 dB
ANT -- RX Control voltage +3 / 0V 0.65 0.95 dB
TX -- ANT f=1.9GHz 20 22 dB
ANT -- RX Control voltage +3 / 0V 20 22 dB
TX f=1.9GHz 24 dBm
RX Control voltage +3 / 0V 20 dBm
min typ max
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Ratings
Unit
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
92500 GI IM
No.6356-1/3
Page 2
SPM3252
0
Insertion -- Input Power
Vctl+3 / 0V, f=1.9GHz
--5
Isolation -- Input Power
Vctl+3 / 0V, f=1.9GHz
0.5
ANT TX on
ANT RX on
1.0
1.5
Insertion Loss (dB)
2.0
2.5
30
25
20
15
10 15 20 25 305
Output Power -- Input Power
Output Power (dBm)
10
Input Power (dBm)
Vctl+3 / 0V, f=1900MHz
ANT TX on
ANT RX on
--10
--15
--20
ANT / TX Isolation at ANT RX on
Isolation (dB)
ANT / RX Isolation at ANT TX on
--25
--30
IT01403 IT01404
0
0.5
1.0
1.5
10 15 20 25 305
Input Power (dBm)
Insertion Loss -- Frequency
Vctl+3 / 0V, Pin=+10dBm
ANT TX on
ANT RX on
Insertion loss (dB)
2.0
5
--5
--10
--15
--20
Isolation (dB)
--25
--30
10 15 20 25 305
Input Power (dBm)
Isolation -- Frequency
Vctl+3 / 0V, Pin=+10dBm
ANT / TX Isolation at ANT RX on
ANT / RX Isolation at ANT TX on
1.0 1.5 2.0 2.5 3.00.5
Frequency (GHz)
IT01405
IT01407
2.5
1.0 1.5 2.0 2.5 3.00.5
Frequency (GHz)
IT01406
No.6356-2/3
Page 3
SPM3252
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of September, 2000. Specifications and information herein are subject
to change without notice.
PS
No.6356-3/3
Loading...