SANYO SPM0103A Datasheet

Features
• Low-voltage, low-current operation
• Compact mini-mold package
• No matching circuits needed for I/O
• Low noise
• Ideal for use as first stage for mobile communications receiver amplifier
unit: mm
7272-CP5
GaAS MMIC
N3096HA(OT) No. 5563-1/2
SANYO: CP5
[SPM0103A]
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
Low-Noise GaAs Amplifier MMIC
SPM0103A
Ordering number : EN5563
Parameter Symbol Conditions Ratings Unit
Power supply voltage V
DD
5V
Gate voltage V
G
–2 V
Allowable power dissipation P
D
0.25 W
Operating temperature Topr V
DD
= 3 V, ID= 60 mA or less –30 to +90 °C Storage temperature Tstg –55 to +150 °C Junction temperature Tj 150 °C
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter Symbol Conditions
Ratings
Unit
min typ max
Drain current t I
D
VDD= 3 V, VG= 0 50 70 95 mA
Noise figure NF V
DD
= 3 V, ID= 25 mA, f = 1.9 GHz 1.1 1.5 dB
Linear gain G
L
VDD= 3 V, ID= 25 mA, f = 1.9 GHz 12 dB
VSWR (input) V
DD
= 3 V, ID= 25 mA, f = 1.9 GHz 2.1
VSWR (output) V
DD
= 3 V, ID= 25 mA, f = 1.9 GHz 2.1
Electrical Characteristics at Ta = 25°C
Individual component name indication: MJ
No. 5563-2/2
SPM0103A
Current-Dependent Characteristics Frequency Characteristics
This catalog provides information as of August, 1997. Specifications and information herein are subject to change without notice.
No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss.
Anyone purchasing any products described or contained herein for an above-mentioned use shall:Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and
distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use:
Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on
SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
Loading...