Sanyo SPM0101 Specifications
Ordering number:EN5373B
SPM0101
Monolithic Microwave IC
Ultrasmall Low-noise Amplifiers
Features
1.Reduced noise and increased sensitivity.
2.Even further miniaturization achieved by the adop-
tion of a miniature molded package (2.9×1.6mm).
3.Inclusion of input and output matching circuits
means that no external circuits are required.
4.Suitable for 1st stage of receiver amp.
Specifications
Absolute Maximum Ratings at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVylppuSmumixaMV
egatloVetaGV
noitapissiDrewoPelbawollAlatoTP
erutarepmeTlennahChcT 051
erutarepmeTegtarotSgtsT 051+ot55–
xamDD
G
T
Package Dimensions
unit:mm
1272
[SPM0101]
1:IN
2:V
G
3:OUT
4GND
5:V
DD
SANYO:CP5
5V
2–V
52.0W
˚C
˚C
Electrical Characteristics at Ta = 25˚C
retemaraPlobmySsnoitidnoC
tnerruCniarDI
rotcaFesioNFNVDDI,V3=
niaGraeniLLGVDDI,V3=
)tupni(RWSVV
)tuptuo(RWSVV
V
D
V,V3=
DD
DD
DD
0=025305Am
G
D
D
I,V3=
D
I,V3=
D
zHG9.1=f,Am02=1.14.1Bd
zHG9.1=f,Am02=5.21Bd
zHG9.1=f,Am02=1.2–
zHG9.1=f,Am02=1.2–
nimpytxam
Equivalent Circuit
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE, Tokyo Bldg., 1-10 , Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
71598HA (KT)/31097GI/N2196YK (KOTO) TA-0763 No.5373-1/2
sgnitaR
tinU
Frequency Characteristics
SPM0101
No products described or contained herein are intended for use in surgical implants, life-support systems,
aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and
the like, the failure of which may directly or indirectly cause injury, death or property loss.
Anyone purchasing any products described or contained herein for an above-mentioned use shall:
Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates,
subsidiaries and distributors and all their officers and employees, jointly and severally, against any
and all claims and litigation and all damages, cost and expenses associated with such use:
Not impose any responsibilty for any fault or negligence which may be cited in any such claim or
litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of
their officers and employees jointly or severally.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees
are made or implied regarding its use or any infringements of intellectual property rights or other rights of
third parties.
This catalog provides information as of July, 1998. Specifications and information herein are subject to
change without notice.
PS No.5373-2/2
Loading...