Sanyo SMO1327 Specifications

Ordering number : ENN7033

SMO1327

Local Oscillation Module

SMO1327

Data Communications Oscillation Module

Use

•

For data communication oscillation module.

Package Dimensions

unit : mm

1315

[SMO1327]

Indentation Point

6.0

ø2.2

20.12

15.24

7.62

Specifications

6.5 6.9

12.5

Output pin terminal ø0.45

Supply pin terminal ø0.45

Absolute Maximum Ratings at T a=25°C

Parameter Symbol Conditions Ratings Unit
Operating Voltage V
Operating T emperature T opr −30 to +60 °C
Storage T emperature T stg −40 to +80 °C

D

6V

Electrical Characteristics at T a=25°C

Parameter Symbol Conditions
Oscillating Frequency fo VD=5V 13200±0.40 MHz

Output Power Po VD=5V 6.0 9.0 dBm
Operating Current ID VD=5V 40.0 50.0 mA
Voltage Stability ∆fV VD=5±0.1V
Temperature Stability ∆fT VD=5V, --30°C to +60°C

Load Stability ∆fL

Phase Noise Np

*1 Reference temperature : +25°C
*2 Otherwise specified DUT (Load VSWR : 1.0) is used in measurement.
*3 All values above are for reference. Contact your local SANYO sales for your requiring specifications.

VD=5V, VSWR : 1.5
VD=5V, VSWR : 3.0
VD=5V, off-carrier : 100kHz --105 --90
VD=5V, off-carrier : 10kHz --85 --70

min typ max

Neither oscillation stop nor jump observed

Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.

Ratings

Within ±0.3
Within ±3.0
Within ±1.5

dBc / Hz

Unit

MHz
MHz

MHz

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

83001 GI IM TA-3293

No.7033-1/2

0

--20

--40

--60

--80

--100

--120

SSB Phase Noise[dBc / Hz]

--140

--160
1000

Phase Noise Characteristic

223355772357

10000 100000 1000000

off-set Frequency[Hz]

SMO1327

IT03625

Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.

This catalog provides information as of August, 2001. Specifications and information herein are subject
to change without notice.

No.7033-2/2

PS