SANYO Service manual / Схема, сервісна інструкція Service manual & schematics

Page 1

Notice				S		0
CORRECT	ION PROD FLASH ADD	UCTION CHANGE		FIL	E NO.
Please add this	s notice to the Service	Manual listed be	low.	REV	/ISION 6
Category:	COLOR TELEVISIO	N	Da	ate: Octo	ober / 15 / 2001
Model:	AVM-3259G		Effective from: Cha	assis No	G5R-3259G7	← \| - \|
Destination: _	U.S.A.	REF: No. SM7	80056-01

NOTE: Match the Chassis No. on the unit's back cover with the Chassis No. in the Service Manual. If the Service Manual Chassis No. does not match the unit's , additional Service Literature is required. This chassis is similar to Chassis No. G5R-3259G4. Only the difference Service Information is given in this manual. For detailed Service Information, refer to the Original Service Manual and Notices for Chassis No. G5R-3259G4 used in Model AVM-3259G (SM780056-01).

1. IN THE CHASSIS ELECTRICAL PARTS LIST

The reason for change.

A: Misprint B: Quality Reliability
D: Design E: Add as a possible sub
G : Purchasing Request

C: Standardization
F: Schematic location change

Page & Section	Schematic Location		Part No.	Description	Q'ty	Interchange- ability	Reason
	★ C411	Old	404 077 4600 403 343 8205	MT-POLYPRO 7800P H 1.5K MT-POLYPRO 7800P H 1.5K	1	NO	D
	- Offi	New	404 077 5003 403 343 8502	MT-POLYPRO 8600P H 1.5K MT-POLYPRO 8600P H 1.5K	1	NO	U
Page 12, Chassis	* C414	Old	403 083 3904	POLYPRO 0.018U J 400V	1	NO	D
Electrical Parts List	~ 0 1 1	New	403 083 4307	POLYPRO 0.022U J 400V	1	NO	D
	* C417	Old	404 081 2302 403 346 6822	MT-POLYPRO 0.2U M 200V MT-POLYPRO 0.2U J 250V	1	NO	Π
		New	404 081 2609 403 346 7126	MT-POLYPRO 0.27U M 200V MT-POLYPRO 0.27U J 250V	1	NO	U
	C462	Old	403 038 1603	ELECT 100U K 6.3V	1	NO	D
	0462	New	403 042 2405	ELECT 100U M 16V	1	NO	D
Page 13, Chassis	D502	Old		NOT USED	1	NO	D
Electrical Parts List	0302	New	407 118 2207	ZENER DIODE DZ1Z75 (75V)	1	NO	U

Page 2

1. IN THE CHASSIS ELECTRICAL PARTS LIST (Continued)

The reason for change.

A: MisprintB: Quality ReliabilityC: StandardizationD: DesignE: Add as a possible subF: Schematic location change
G: Purchasing Request

Page & Section	Schematic Location		Part No.	Description	Q'ty	Interchange- ability	Reason
	DAGO	Old	401 026 3905	CARBON 330 JA 1/6W	1	NO
	R460	New	401 024 9008	CARBON 120 JA 1/6W	1	NO	D
	D441	Old	401 026 0607	CARBON 270 JA 1/6W	1	NO	C
	K401	New	401 026 3905	CARBON 330 JA 1/6W	1	NO	D
	★ D/107	Old	401 066 3002	OXIDE MT 2.2 JA 2W	1	NO	D
Page 18, Chassis	^ K477	New	401 067 2509	OXIDE MT 3.3 JA 2W	1	NO	D
Electrical Parts List	P504	Old	401 024 7400	CARBON 10K JA 1/6W	1	NO	D
	K304	New	401 027 5502	CARBON 6.8K JA 1/6W	1	NO	D
	DE04	Old	401 026 6609	CARBON 390 JA 1/6W	1	NO
	K000	New	401 027 5205	CARBON 680 JA 1/6W	1	NO
	R508	Old	401 025 1902	CARBON 15K JA 1/6W	1	NO	D
	R508	New	401 024 9701	CARBON 12K JA 1/6W	1	NO	D
	R509	Old	401 024 7400	CARBON 10K JA 1/6W	1	NO	C
	R509	New	401 027 5502	CARBON 6.8K JA 1/6W	1	NO	D
	DE12	Old	401 007 1104	CARBON 1K JA 1/2W		NO	D
	K515	New		NOT USED	1	NO	D
	A 100	Old	610 285 7238	ASSY, PWB, MAIN BRD	1	NO	D
	Aloo	New	610 295 4302	ASSY, PWB, MAIN BRD	1	NO	D
	4700	Old	610 281 9472	ASSY, PWB, SOCKET BRD	1	NO	C
Page 20, Chassis Electrical Parts List	A700	New	610 295 4166	ASSY, PWB, SOCKET BRD	1	NO	D
Page 20, Chassis Electrical Parts List	+K201	Old	645 025 6103	SOCKET, CRT 8P	1	NO	D
		New	645 042 7664	SOCKET, CRT 9P	1	NO	U
	+0000	Old	414 008 9901	CRT A80ECK272X54	1	NO	D
		New	414 011 4603	CRT A80AKB50X01(V)	1	NO	U

Page 3

2. IN THE CABINET / ACCESSORY PARTS LIST

The reason for change.

A : Misprint B : Quality Reliability C : Standardization
D: Design E: Add as a possible sub F: Schematic location change
G: Purchasing Request

Page & Section	Key Number		Part No.	Description	Q'ty	Interchange- ability	Reason
Page 21, Cabinet / Accessories Parts List	N/A	Old	610 282 3332	OWNER'S MANUAL	1	NO	D
	N/A	New	610 289 2949	OWNER'S MANUAL	1	NO	D
	NI/A	Old	645 032 6165	RCTRANSMITTER	1	NO	D
		New	645 048 1352	RCTRANSMITTER	1	NO	D

Page 4

For parts or service contact SANYO Fisher Service Corporation 21605 Plummer Street Chatsworth, CA 91311

Page 5

Notice		SANYO
CORRECTION PROD SERVICE FLASH ADD	DUCTION CHANGE INFORMATION Manual listed balow	FILE NO. C - 2489 REVISION 4
Category: COLOR TELEVISION	N	Date: June / 15 / 2001
Model: AVM-3259G	Effective from:	Chassis No. G5R-3259G5
Destination:U.S.A.	REF: No. SM780056-01

NOTE: Match the Chassis No. on the unit's back cover with the Chassis No. in the Service Manual. If the Service Manual Chassis No. does not match the unit's, additional Service Literature is required. This chassis is similar to Chassis No. G5R-3259G4. Only the difference Service Information is given in this manual. For detailed Service Information. refer to the Original Service Manual and Notices for Chassis No. G5R-3259G4 used in Model AVM-3259G (SM780059-01)

1. IN THE CHASSIS ELECTRICAL PARTS LIST

The reason for change

A: Misprint B : Ouality Reliability
C : Standardization F: Schematic location change
D: Design E : Add as a possible sub
G: Purchasing Request
Page & Schematic Interchange-Part No. Description O'ty Reason Section Location ability 404 077 4600 MT-POLYPRO 7800P H 15K NO 403 343 8205 MT-POLYPRO 7800P H 1.5K * C411 404 077 5003 MT-POLYPBO 8600P H 15K New NO 403 343 8502 MT-POLYPRO 8600P H 1.5K Page 12, Old 403 083 3904 POLYPRO 0 018U .1 400V NO Chassis * C414 New 403 083 4307 POLYPRO 0.022U J 400V NO Parts List 403 049 9803 ELECT 2.2U M 50V NO C461 New 403 044 6609 ELECT 10U M 25V ОМ 403 038 1603 ELECT 100U K 6.3V C462 New 403 043 9106 ELECT 47U M 16V NO Old 401 026 3905 CARBON 330 JA 1/6W NO R460 Page 18, New 401 024 9008 CARBON 120 JA 1/6W Chassis blO 401 026 0607 CARBON 270 JA 1/6W R461 New 401 025 7409 CARBON 220 JA 1/6W NO

Page 6

Notice				SANYO
CORRECT	TION PRO	DUCTION CHA D INFORMATIO	ANGE N	FILE NO. C - 2484
Please add thi	s notice to the Servic	e Manual liste	ed below.	REVISION 3
Category:	COLOR TELEVISI	ON	D	bate: JULY / 15 / 2000
Model:	AVM-3259G	_	Effective from: Cha	assis No. G5R-3259G3
Destination:	U.S.A.	REF: No	SM780056-01

NOTE : Match the Chassis No. on the unit's back cover with the Chassis No. in the Service Manual If the Service Manual Chassis No. does not match the unit's, additional Service Literature is required. This chassis is similar to Chassis No. G5R-3259G4. Only the difference Service Information is given in this manual. For detailed Service Information, refer to the Original Service Manual and Notices for Chassis No. G5R-3259G4 used in Model AVM-3259G (SM780059-01).

1. IN THE CHASSIS ELECTRICAL PARTS LIST

The reason for change.

D: Design

B : Quality Reliability A: Misprint E : Add as a possible sub
C: Standardization
F: Schematic location change

G: Purchasing Request
Interchange-Page & Schematic Part No. O'ty Reason Description Section Location ability 404 077 4600 MT-POLYPRO 7800P H 1.5K NO OId MT-POLYPRO 7800P H 1.5K 403 343 8205 D * C411 404 077 5003 New NO 403 343 8502 MT-POLYPBO 8600P H 1.5k Page 12, Old 403 083 3904 POLYPRO 0.018U J 400V NO Chassis * C414 Electrical 403 083 4307 POLYPRO 0.022U J 400V NO New Оід 103 049 9803 ELECT 2 2U M 50V C461 FLECT 10U M 25V New 403 044 6609 DiO 403 038 1603 ELECT 100U K 6.3V C462 NO New 403 043 9106 ELECT 47U K 16V NO Old 401 026 3905 CARBON 330 JA 1/6W R460 Page 18, 401 024 9008 CARBON 120 JA 1/6W NO New Chassis 401 026 0607 CARBON 270 JA 1/6W Parts List R461 CARBON 220 JA 1/6W NO New 401 025 7409

Page 7

1. IN THE CHASSIS ELECTRICAL PARTS LIST (Continued)

The reason for change.

A: Misprint B: Quality Reliability C: Standardization
D: Design E: Add as a possible sub F: Schematic location change
G : Purchasing Request

Page & Section	Schematic Location		Part No.	Description	Q'ty	Interchange- ability	Reason
	★ ₽407	Old	401 066 3002	OXIDE MT 2.2 JA 2W	1	NO	D
	~11437	New	401 064 5305	OXIDE MT 1.5 JA 2W	1	NO	D
	8504	Old	401 024 7400	CARBON 10K JA 1/6W	1	NO	D
	11304	New	401 027 5502	CARBON 6.8K JA 1/6W	1	NO	U
	8506	Old	401 026 6609	CARBON 390 JA 1/6W	1	NO	2
Page 18, Chassis	11300	New	401 027 5205	CARBON 680 JA 1/6W	1	NO	υ
Electrical Parts List	B508	Old	401 025 1902	CARBON 15K JA 1/6W	1	NO	D
	11000	New	401 024 9701	CARBON 12K JA 1/6W	1	NO	D
	R509	Old	401 024 7400	CARBON 10K JA 1/6W	1	NO	D
	R509	New	401 027 5502	CARBON 6.8K JA 1/6W	1	NO	D
	R513	Old	401 007 1104	CARBON 1K JA 1/2W		NO	D
	R513	New		NOT USED	1	NO	U
	A100	Old	610 285 7238	ASSY, PWB, MAIN BRD	1	NO	2
		New	610 286 3048	ASSY, PWB, MAIN BRD	1	NO	U
Page 20, Chassis	★PS601	Old	408 006 7304 408 010 7307	THERMISTOR THERMISTOR	1	NO	D
Electrical Parts List	~F3001	New	408 038 5606 408 041 8205	THERMISTOR THERMISTOR	1	NO	U
	*0900	Old	414 008 9901	CRT A80ECK272X54	1	NO
		New	414 010 7001	CRT A80JUA068X72	1	NO	U

For parts or service contact SANYO Fisher Service Corporation 21605 Plummer Street Chatsworth, CA 91311

Page 8

1 IN THE CHASSIS FLECTRICAL PARTS LIST (Continued)

The reason for change.

A: Misprint B: Ouality Reliability C: Standardization
D: Design E: Add as a possible sub F: Schematic location change
G : Purchasing Request

Page & Section	Schematic Location		Part No.	Description	Q'ty	Interchange- ability	Reason
	1.0.07	Old	401 066 3002	OXIDE MT 2.2 JA 2W	1	NO	D
	≭R497	New	401 064 5305	OXIDE MT 1.5 JA 2W	1	NO	Б
	DEGA	Old	401 024 7400	CARBON 10K JA 1/6W	1	NO	D
	K504	New	401 027 5502	CARBON 6.8K JA 1/6W	1	NO	b
	DEOG	Old	401 026 6609	CARBON 390 JA 1/6W	1	NO	D
Page 18, Chassis	ROUD	New	401 027 5205	CARBON 680 JA 1/6W	1	NO	U
Electrical Parts List	R508	Old	401 025 1902	CARBON 15K JA 1/6W	1	NO	D
	R508	New	401 024 9701	CARBON 12K JA 1/6W	1	NO	0
	DEOO	Old	401 024 7400	CARBON 10K JA 1/6W	1	NO	D
	K509	New	401 027 5502	CARBON 6.8K JA 1/6W	1	NO
	DE10	Old	401 007 1104	CARBON 1K JA 1/2W		NO	п
	1013	New		NOT USED	1	NO	5
	A 100	Old	610 285 7238	ASSY, PWB, MAIN BRD	1	NO	р
Page 20, Chassis	AIUU	New	610 286 3048	ASSY, PWB, MAIN BRD	1	NO	Ð
Electrical Parts List	+0000	Old	414 008 9901	CRT A80ECK272X54	1	NO
	*Q900	New	414 010 7001	CRT M80JUA068X72	1	NO	U

2. IN THE CABINET / ACCESSORY PARTS LIST

The reason for change.

A · Misprint B · Quality Reliability C · Standardization
D: Design E: Add as a possible sub F: Schematic location change

G: Purchasing Request

Page & Section	Key Number		Part No.	Description	Q'ty	Interchange- ability	Reason
Page 21, Cabinet / Accessories Parts List	N1/A	Old	610 282 3356	OWNER'S MANUAL	1	NO	D
	N/A	New	610 289 2949	OWNER'S MANUAL	1	NO	D
	N/A	Old	645 032 6165	RCTRANSMITTER	1	NO	D
	N/A	New	645 044 3275	RCTRANSMITTER	1	NO	D

For parts or service contact SANYO Fisher Service Corporation 21605 Plummer Street Chatsworth, CA 91311

Page 9

Notice		SANYO
CORRECTION PRODU	JCTION CHANGE NFORMATION Manual listed below.	FILE NO. C - 2484 REVISION 2
Category: COLOR TELEVISION	Dat	e: JUNE / 15 / 2000
Model: AVM-3259G	Effective from: Chas	sis No. G5R-3259G2
Destination: U.S.A.	REF: No. SM780056-01
	,

NOTE: Match the Chassis No. on the unit's back cover with the Chassis No. in the Service Manual. If the Service Manual Chassis No. does not match the unit's, additional Service Literature is required. This chassis is similar to Chassis No. G5R-3259G4. Only the difference Service Information is given in this manual. For detailed Service Information. refer to the Original Service Manual and Notices for Chassis No. G5B-3259G4 used in Model AVM-3259G (SM780059-01)

1 IN THE CHASSIS ELECTRICAL PARTS LIST

The reason for change.

A : Misprint B: Ouality Reliability
C : Standardization
D : Design E : Add as a possible sub
F: Schematic location change

G: Purchasing Request
Interchange-Page & Part No. Description O'tv Reason Section Location ability 404 077 4600 NO Old 403 343 8205 MT-POLYPRO 7800P H 1.5K *C411 404 077 5003 NO 403 343 8502 MT-POLYPRO 8600P H 1.5K ОИ 403 083 3904 POLYPBO 0 01811 1 400V NO ★C414 D New 403 083 4307 POLYPRO 0.022U J 400V NO Page 12, Chassis Old 403 049 9803 ELECT 2.2U M 50V NO C461 Parts List Now 403 044 6609 ELECT 10U M 25V NO 403 038 1603 ELECT 100U K 6.3V NO C462 New 403 043 9106 ELECT 47U M 16V NO

Parts list continued on back.

Page 10

1. IN THE CHASSIS ELECTRICAL PARTS LIST (Continued)

The reason for change.

A: Misprint B: Quality Reliability C: Standardization
D: Design E: Add as a possible sub F: Schematic location change
G: Purchasing Request

Page & Section	Schematic Location		Part No.	Description	Q'ty	Interchange- ability	Reason
	P460	Old	401 026 3905	CARBON 330 JA 1/6W	1	NO	D
	11400	New	401 024 9008	CARBON 120 JA 1/6W	1	NO	0
	R461	Old	401 026 0607	CARBON 270 JA 1/6W	1	NO	D
	11401	New	401 025 7409	CARBON 220 JA 1/6W	1	NO	U
	★B/197	Old	401 066 3002	OXIDE-MT 2.2 JA 2W	1	NO	D
		New	401 064 5305	OXIDE-MT 1.5 JA 2W	1	NO	נ
	B504	Old	401 024 7400	CARBON 10K JA 1/6W	1	NO	р
Page 18,	11004	New	401 027 5502	CARBON 6.8K JA 1/6W	1	NO	ŭ
Electrical Parts List	8506	Old	401 026 6609	CARBON 390 JA 1/6W	1	NO	D
		New	401 027 5205	CARBON 680 JA 1/6W	1	NO	D
	R508	Old	401 025 1902	CARBON 15K JA 1/6W	1	NO	D
	R508	New	401 024 9701	CARBON 12K JA 1/6W	1	NO	D
	8509	Old	401 024 7400	CARBON 10K JA 1/6W	1	NO	р
	11505	New	401 027 5502	CARBON 6.8K JA 1/6W	1	NO	D
	B513	Old	401 007 1104	CARBON 1K JA 1/2W	1	NO	П
	1010	New		NOT USED	NO		D
	A100	Old	610 285 7238	ASSY, PWB, MAIN BRD	1	NO	D
		New	610 284 7130	ASSY, PWB, MAIN BRD	1	NO	b
Page 20, Chassis Electrical Parts List	★P$601	Old	408 006 7304 408 010 7307	THERMISTOR THERMISTOR	1	NO	D
Page 20, Chassis Electrical Parts List		NEW	408 038 5106 408 041 8205	THERMISTOR THERMISTOR	1	NO
	*0900	Old	414 008 9901	CRT A80ECK272X54	1	NO	D
		New	414 009 5308	CRT M80JUA068X71	1	NO

For parts or service contact SANYO Fisher Service Corporation 21605 Plummer Street Chatsworth, CA 91311

Page 11

Notice	SANYO
CORRECTIONPRODUCTION CHANGESERVICE FLASHADD INFORMATION	FILE NO. C - 2489
Please add this notice to the Service Manual listed below	v. REVISION 1
Category : COLOR TELEVISION	Date: JUNE / 15 / 2000
AVM-3259G Model:AVM-3259S	G5R-3259G4 Effective from : Chassis No. G5R-3259S1
Destination: U.S.A. / CANADA REF : No	SM780056

NOTE: Match the Chassis No. on the unit's back cov If the Service Manual Chassis No. does not required. This chassis is similar to Chassis I Service Information is given in this Notice for Cl	rer with the Chassis No. in the Service Manual. match the unit's, additional Service Literature is No. G5R-3259G1 / G5R-3259S0, however, all massis No.G5R-3259G4 / G5R-3259S1.

Safety Instructions 2
Service Adjustments 3 - 8
Service Hints
Mechanical Disassemblies 10
Chassis Electrical Parts List 11 - 20
Cabinet Parts List 21
Component and Test Point
Locations 22 - 23
Schematic Insert 25 - 32
Schematic Notes
Pin Layouts25
Capacitor and Resistor Codes 25
Block Diagram
Voltage Charts 26 - 28
Waveforms
Schematic Diagrams

Specifications

Power Rating 120V,	, 60Hz
89 W (Avg), 2.5A	(Max)
Antenna Input Impedance	. 75Ω
UHF/VHF/	CATV
Receiving Channel	VHF),
14 - 69 (	UHF),
01, 14-94, 95-125 (0	CATV)
Remote Ready 33 Key Remote Co	ontrol
Sound Output 3.0	W/CH
Intermediate Frequency
Picture IF Carrier	5MHz
Sound IF Carrier	5MHz
Color Sub Carrier	7MHz
Picture Tube A80ECK27	72X54
Semiconductors
Integrated Circuits	11
Transistors	37
Except within Tuner and BC Pre	-Amn
Cabinet Dimensions	. unp
Width	32mm
Height 70	)7mm
Depth 53	89mm
	, on the

AVM-3259G, G5RTM, PRODUCT CODE 111341081 AVM-3259S, G5RVM, PRODUCT CODE 111341083

REFERENCE No. SM780056-01

Page 12

SAFETY INSTRUCTIONS

SAFETY PRECAUTIONS

WARNING: The chassis of this receiver has a floating ground with the potential of one half the AC line voltage in respect to earth ground. Service should not be attempted by anyone not familiar with the precautions necessary when working on this type of equipment.

The following precautions must be observed:

1. An isolation transformer must be connected in the power line between the receiver and the AC line before any service is performed on the receiver.
2. Comply with all caution and safety-related notes provided on the side of the cabinet, inside the cabinet, on the chassis, and the picture tube.
3. When replacing a chassis in the cabinet, always be certain that all the protective devices are installed properly, such as control knobs, adjustment covers, shields and barriers.

DO NOT OPERATE THIS TELEVISION RECEIVER WITHOUT THE PROTECTIVE SHIELD IN POSITION AND PROPERLY SECURED.

4. Before replacing the back cover of the set, thoroughly inspect the inside of the cabinet to see that no stray parts or tools have been left inside.

Before returning any television to the customer, the service technician must perform the following safety checks to be sure that the unit is completely safe to operate without danger of electrical shock.

ANTENNA COLD CHECK

Remove AC plug from the 120 VAC outlet and place a jumper across the two blades. Connect one lead of an ohmmeter to the jumpered AC plug, and touch the other lead to each exposed antenna terminal (UHF and VHF antenna terminals). The resistance must measure between 1M ohm and 5.2M ohm. Any resistance value below or above this range indicates an abnormality which requires corrective action.

LEAKAGE CURRENT CHECK

Plug the AC line cord directly into a 120 VAC outlet. (Do not use an isolation transformer for this check.) Use an AC voltmeter, that has 5000 ohms per volt or more sensitivity. Connect a 1500 ohm 10 watt resistor, paralleled by a 0.15 µF 150 VAC capacitor, between a known good earth ground (water pipe, conduit, etc.) and all exposed metal parts of the cabinet (antennas, handle bracket, metal cabinet, screw heads, metal overlays, control shafts, etc.). Measure the AC voltage across the 1500 ohm resistor. The AC voltage should not exceed 750 mV. A reading exceeding 750 mV indicates that a dangerous potential exists. The fault must be located and corrected. Repeat the above test with the receiver power plug reversed.

NEVER RETURN A RECEIVER TO THE CUSTOMER WITHOUT TAKING THE NECESSARY CORRECTIVE ACTION.

X-RADIATION PRECAUTION

The primary source of X-RADIATION in solid-state receivers is the picture tube. The picture tube is specially constructed to limit X-Ray emission. For continued X-RADIATION protection, the replacement tube must be the same type as the original (including the suffix letter in the part numbers). Excessive high voltage may produce potentially hazardous X-RADIATION. To avoid such hazards, the high voltage must be maintained within specific limits. Refer to the X-RADIATION WARNING NOTE on the CHASSIS SCHEMATIC in this service manual for specific high voltage limits. If the high voltage exceeds specified limits, check the components specified on the chassis schematic diagram and take the necessary corrective action. Carefully follow the instructions for the +B Voltage Check and the High Voltage Check to maintain the high voltage within the specified limits.

HIGH VOLTAGE HOLD-DOWN TEST

To prevent X-RADIATION from the picture tube due to excessive high voltage, a HOLD-DOWN circuit is provided in the high voltage circuit. Every time the receiver is serviced, the high voltage HOLD-DOWN circuit must be tested for proper operation. Refer to the HIGH VOLTAGE HOLD-DOWN TEST in service adjustments.

PRODUCT SAFETY NOTICE

When replacing components in a receiver, always keep in mind the necessary product safety precautions. Pay special attention to the replacement of components marked with a star ( ★ ) in the parts list and in the schematic diagrams. To ensure safe product operation, it is necessary to replace those components with the exact same PARTS.

Page 13

SERVICE ADJUSTMENTS

GENERAL

This set has an On-screen Service Menu system included in the CPU that allows remote operation for most of the service adjustments.

IC802 (EEPROM) REPLACEMENT

When IC802 (EEPROM) is replaced, IC801 (CPU) will automatically write the initial reference data into IC802 for basic TV operation. However, the bus data should be checked and some bus data should be set up before attempting the service adjustments. (See pages 4 – 5 for detailed information.)

INITIAL BUS DATA SETUP

Note: When IC802 (EEPROM) is replaced, the Service Menu NO. 01 HP (H-Phase), NO. 14 AF (Auto Flesh), NO. 21 GD (G Drive Reduction), NO. 24 AG (AFC Gain), NO. 26 SCO (Sub Color), NO. 27 STI (Sub-Tint), NO. 29 OPT (Option 1), NO. 30 OP2 (Option 2), NO. 31 HR (OSD Display H-Position) and NO. 38 SBO (Sub Bright Offset) should be set up for proper TV operation before attempting the service adjustments.

1. Disconnect the AC power cord (AC 120V line).
2. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear.
3. Select NO. 01 HP (H-Phase) with ▲ or ▼ key. Adjust the data with + or key for 20.
4. Select NO. 14 AF (Auto Flesh) with ▲ or ▼ key. Adjust the data with + or key for 1.
5. Select NO. 21 GD (G Drive Reduction) with ▲ or ▼ key. Adjust the data with + or key for 8.
6. Select NO. 24 AG (AFC Gain) with ▲ or ▼ key. Adjust the data with + or key for 0.
7. Select NO. 26 SCO (Sub Color) with ▲ or ▼ key. Adjust the data with + or key for 7.
9. Select NO. 27 STI (Sub Tint) with ▲ or ♥ key. Adjust the data with + or key for 19.
10. Select NO. 29 OPT (Option 1) with ▲ or ▼ key. Adjust the data with + or key for 16
11. Select NO. 30 OP2 (Option 2) with ▲ or ▼ key. Adjust the data with + or key for 39
12. Select NO. 31 HR (OSD Display H-Position) with ▲ or ▼ key. Adjust the data with + or key for 47.
13. Select NO. 38 SBO (Sub Bright Offset) with ▲ or ▼ key. Adjust the data with + or key for 3.
14. Press the MENU key to turn off the Service Menu display.

ON-SCREEN SERVICE MENU SYSTEM

1. Enter the Service Menu:

• While pressing the MENU key, reconnect the AC power cord. The Service Menu Display will now appear. (See Figure 1 below.)

Figure 1. Service Menu Display

2. Service Adjustments:

Press the A or V key to select the desired service menu you want to adjust. (See page 4 for On-screen Service Menu.)
Use the + or key to adjust the data.

3. Exit from the Service Menu:

• Press the MENU key to turn off the Service Menu display.

Page 14

Table 1. ON-SCREEN SERVICE MENU

When IC802 (EEPROM) is replaced, check the bus data to confirm they are the same as below. The shaded menu should be checked and be set up or readjusted according to the procedures described in the following pages. Initial Setup Data marked with an * should be changed from Initial Reference Data. (See page 3 for Initial Bus Data Setup.)

NO.	TITLE	INITIAL REFERENCE DATA	INITIAL SETUP DATA	RANGE OF DATA	FUNCTION
01	ΗР	15	20*	0~31	H-Phase (H-Centering)
02	IAS	0	0	0, 1	IF AGC Switch 0: TV (Normal) 1: AV (IF Gain Minumum)
03	RAD	25	25	0~63	RF AGC Delay
04	PT	64	64	0~127	PLL Tuning
05	ADA	31	31	0~63	APC Detect Adjust
06	CD	0	0	0, 1	C-Diff
07	VS	32	32	0~63	Vertical Size
08	RB	0	0	0~255	Red Bias
09	GB	0	0	0~255	Green Bias
10	BB	0	0	0~255	Blue Bias
11	RD	60	60	0~127	Red Drive
12	BD	60	60	0~127	Blue Drive
13	TDS	0	0	0, 1	Trap & D (B.P.F.) Switch 0: OFF 1: ON
14	AF	0	1*	0, 1	Auto Flesh 0: OFF 1: ON
15	BS	0	0	0, 1	Black Stretch 0: OFF 1: ON
16	VL	4	4	0~7	Video Level
17	FL	15	15	0~31	FM Level
18	NIS	1	1	0, 1	N/I Switch (Black Noise Inverter) 0: OFF 1: ON
19	ABL	1	1	0,1	ABL Defeat 0: OFF 1: ON
20	WP	1	1	0,1	White Peak Limiter 0: OFF 1: ON
21	GD	7	8 ×	0~15	Green Drive Reduction
22	VC	0	0	0~7	Vert. Comp
23	VD	32	32	0~63	Vert. DC
24	AG	3	0*	0~3	AFC Gain 00: Auto 01: High Gain 10: Low Gain 11: Non-Gate
25	SB	32	32	0~63	Sub-Brightness
26	sco	10	7*	0~31	Sub-Color
27	STI	14	19*	0~31	Sub-Tint
28	SSH	8	8	0~15	Sub-Sharpness
29	OPT	0	16*	0~255	Option 1 (See Note 1 page 5.)
30	OP2	0	39*	0~255	Option 2 (See Note 2 page 5.)
31	HR	43	47*	0~63	H-Position (OSD H-Position)
32	ATT	15	15	0~15	Attenuation
33	STE				Not Used
34	FIL	_		_	Not Used
35	WDB	32	32	0~63	Wideband
36	SPC	32	32	0~63	Spectral
37	SPV	_		_	Not Used
38	SBO	5	3*	0~255	Sub Bright Offset
39	PCO	42	42	0~127	PIP Color
40	PTI	36	36	0~63	PIP Tint
41	PUV	24	24	0~255	PIP Upper Vertical Position
42	PDV	147	147	0~255	PIP Lower Vertical Position
43	PLH	9	9	0~255	PIP Left Side Horizontal Position
44	PRH	99	99	0~255	PIP Right Side Horizontal Position
45	PCN	47	47	0~127	PIP Contrast
46	PBS	14	14	0~63	PIP Burst Gate Position
	DDV	55	60*	0~127	Red Drive Adjustment (See Note 3 page 5.)
4/	DRV	55	60*	0~127	Blue Drive Adjustment (See Note 3 page 5.)
	-	0	0	0~255	Red Bias Adjustment (See Note 4 page 5.)
48	-	0	0	0~255	Green Bias Adjustment (See Note 4 page 5.)
	-	0	0	0~255	Blue Bias Adjustment (See Note 4 page 5.)

Page 15

SERVICE ADJUSTMENTS (Continued)

PROGRAM CODES

The microprossesor used in this model is a multi-purpose type and is used in several different models. To ensure proper operation and the correct features for your particular model, the Program Codes must be correct.

Note 1. Option Data 1 (NO. 29 OPT) should be decimal 16 (00010000 binary). See page 3 INITIAL DATA SETUP, step 10, for set up procedure. If this program code is wrong the TV will not operate properly.

DIT	FUNCTION	DA	TA
BH	FUNCTION	0	1
0, 1	TV HOTEL MONITOR	00: TV 01: HOTEL 10: MONITC 11: INHIBITE	)R (*1) D (=TV)
2	VIDEO INPUT	NONE (*2)	YES
3, 4	CLOCK	00: NONE 01: YES (AC 60 HZ) 10: YES (INT OSC) 11: INHIBITED (=NONE
5	STEREO/MONO	MONO (*3)	STEREO
6, 7	SURROUND	00: NONE 01: YES 10: Q-SOUN 11: INHIBITE	ID ED (=NONE)

Note 2. Option Data 2 (NO. 30 OP2) should be decimal 39 (00100111 binary). See page 3 INITIAL DATA SETUP, step 11, for set up procedure. If this program code is wrong the TV will not operate properly.

DIT	FUNCTION	DATA
вп	FUNCTION	0	1
0	NOT USED	_	_
1	COLOR ENHANCER	NONE	YES
2	INITIAL CHANNEL	NONE	YES (*4)
3	NOT USED	-	_
4	PIP	NONE	YES
5	AV1/AV1, AV2	AV1	AV1, AV2
6	TONE/BASS, TREBLE	BASS, TR	TONE(*5)
7	GAME	NONE	YES

*1. When the Monitor option is used, the CPU regards the Video Input option as Yes and the PIP option as None.
*2. When the None Video Input option is used, the CPU regards the PIP option as None.
*3. When the Mono option is used, the CPU regards the Surround and Tone options as None.
*4. When the Initial Channel option is used the Initial Channel and XDS (Extended Data Service) features are available.
*5. When the Mono option is used, the CPU regards the Tone option as None.

Note 3. Red/Blue Drive Adjustments in Service Menu NO. 47 DRV : Adjust Red and Blue Drive Levels alternately with 1, 3, 7, and 9 keys on the remote control. (See figure 2.) The Drive Level adjustment data will be written in the Service Menu No. 11 and 12 automatically.

Note 4. Red/Green/Blue Bias Adjustments in Service Menu NO. 48: Adjust each Bias Level with 1, 3, 4, 6, 7, or 9 key on the remote control. (See figure 3.) The Bias Level adjustment data will be written in the Service Menu No. 08 ~ 10 automatically.

Figure 3.

Page 16

SERVICE ADJUSTMENTS (Continued)

ANTENNA CONNECTIONS

This receiver is designed for UHF/VHF reception. A 75 ohm terminal is provided for UHF and VHF receptions. When connecting a CATV antenna system, connect the 75 ohm coaxial cable directly to the 75 ohm terminal. For 300 ohm VHF antenna, use an adapter (not included with the TV set).

CIRCUIT PROTECTION

Fuse F601 (4A) is included in the AC line. This fuse must be replaced with the proper fuse (see Parts List).

CAUTION

FOR CONTINUED PROTECTION AGAINST A RISK OF FIRE, REPLACE ONLY WITH THE SAME TYPE 4A, 125V FUSE.

ATTENTION : POUR MAINTENIR LA PRO-TECTION CONTRE LES RISQUES D' INCENDIE UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE 4A, 125V.

+B VOLTAGE CHECK

Connect Voltmeter + lead to TJ1 130V and – lead to ground (TE7). Connect receiver to AC 120V line. Tune receiver to an active channel. Reset the picture controls to the News levels. Voltage must measure between +128.0V and 132.0V. If the voltage is out of this range, the power circuit must be checked. No +B adjustment is provided on this chassis.

HORIZONTAL WIDTH ADJUSTMENT

1. Tune receiver to an active channel.
2. Adjust H-Width Control (VR461) for proper width.
3. Select several other channels and check width.

HORIZONTAL CENTERING ADJUSTMENT

1. Tune receiver to an active channel.
2. Check that picture is in the horizontal center of TV screen.
If picture is not centered horizontally, perform steps 3 ~ 6. 3. Turn off the receiver and disconnect the AC power cord (120V AC line).
4. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear.
5. Select NO. 01 HP (Horizontal Phase) with A or V key.
6. Adjust the data with + or key for horizontal center. To turn off the Service Menu display, press the MENU key.

VERTICAL SIZE ADJUSTMENT

1. Tune receiver to an active channel
2. Check the vertical size of the picture. If the vertical size is too large or small, perform steps 3 ~ 6.
3. Turn off the receiver and disconnect the AC power cord (120V AC line).
4. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear.
5. Select NO. 07 VS (Vertical Size) with ▲ or ▼ key.
Adjust the data with + or key for full scan. To turn off the Service Menu display, press the MENU key.

VERTICAL CENTERING ADJUSTMENT

1. Tune receiver to an active channel.
Check that picture is in the center of TV screen. If picture center is too low, replace resistor R513 (1K ohm, 1/2W)

with a 470 ohm, 1W resistor. If picture center is too high, remove resistor R513 (1K ohm, 1/2W).

GRAYSCALE ADJUSTMENT

Set the picture controls to the Sports or Reset levels (use MENU key and ▲ or ▼ key, or Reset key).
2. Turn off the receiver and disconnect the AC power cord (120V AC line).
3. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear.
4. Select NO. 08 RB (Red Bias), NO. 09 GB (Green Bias), and NO. 10 BB (Blue Bias) with ▲ or ▼ key and set each data to 0 with + or key.
5. Select NO. 11 RD (Red Drive) and NO. 12 BD (Blue Drive) with ▲ or ▼ key and set each data to 60 with + or key.
Set NO. 21 GD (G Drive Reduction) data to 8, NO. 25 SB (Sub-Brightness) data to 32, NO. 26 SCO (Sub-Color) data to 7, and NO. 27 STI (Sub-Tint) to 19 with ▲ or ▼, and + or keys.
7. Turn Screen Control (T402) to minimum (fully counterclockwise).
8. Select the Service Menu NO. 48 (Bias Adjustments) with ▲ or ▼ key.
Advance Screen Control (T402) clockwise to obtain just visible one color line. If line does not appear, place this control to maximum (fully clockwise).
10. Raise each Bias Level with 3, 6, and 9 keys to obtain just visible white line. (See Figure 4 below.)

Figure 4. Remote Control Number keys' function in Service Menu NO. 48

Select the Service Menu NO. 47 DRV (Drive Adjustments) with ▲ or ▼ key.
12. Adjust Red and Blue Drive Levels alternately with 1, 3, 7, or 9 key to produce normal black and white picture in highlight areas. (See figure 5 below.)

Figure 5. Remote Control Number keys' function in Service Menu NO. 47 DRV

13. Check for proper grayscale at all brightness levels. To turn off the Service Menu display, press the MENU key.
Note: If Grayscale Adjustment is made after picture tube replacement, check Brightness Level Adjustment.

FOCUS ADJUSTMENT

Adjust focus control (T402) for well defined scanning lines.

Page 17

PLL TUNING ADJUSTMENT

Note: PLL Tuning must be adjusted after IC101 (Signal Processor), IC802 (EEPROM) or T151 (PLL VCO Coil) is replaced.
- 1. Disconnect the AC power cord (120V AC line).
While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear.
3. Select NO. 04 PT (PLL Tuning) with ▲ or ▼ key.
4. Adjust the data to 64 with + or key.
5. Disconnect the AC power cord (120V AC line).
6. Connect voltmeter + lead to TP113 on main board and – lead to main board ground.
7. Press and Hold the POWER key on the front control panel while connecting the AC power cord. TV will turn on.
Bisconnect the antenna terminal and select a good quality active color channel in your area, using keys 0 ~ 9 on the remote control. Wait a few seconds, and then reconnect the antenna terminal.
9. Turn PLL VCO coil (T151) on main board fully clockwise, and then gradually turn the coil counterclockwise until voltage is at the maximum level (approximately 6.7 VDC). Continue to turn the coil counterclockwise until the voltage is at the minimum level (approximately 0.7 VDC), and then turn the coil clockwise until voltage indicates 3.8 ± 1.0 VDC. Voltage change in the coil adjustments is shown in Figure 6.
10. Disconnect voltmeter from chassis.

Select every active channel with keys 0 ~ 9 and the scanning keys, and check to be sure the AFT is operating properly.

Figure 6. Voltage Change in Coil Adjustment

RF-AGC ADJUSTMENT

1. Tune receiver to strongest VHF station in your area.
2. Set contrast and brightness controls for maximum.
3. Turn off the receiver and disconnect the AC power cord (120V AC line).
4. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear.
5. Select NO. 03 RAD (RF-AGC Delay) with ▲ or ▼ key
6. Adjust the data with + or key in the direction which causes snow to appear; then in the opposite direction until the snow just disappears.
7. To turn off the Service Menu display, press the MENU key.

BRIGHTNESS LEVEL ADJUSTMENT

Note: Grayscale, RF-AGC, Video Level, and High Voltage Check must be adjusted before attempting Brightness Level Adjustment.
1. Connect a color-bar generator to the antenna terminals.
2. Switch the generator to the crosshatch pattern.
3. Reset the picture controls to the Sports levels.

Connect voltmeter (high impedance) + lead to terminal TP51 and - lead to terminal TP50 on main board. Set voltmeter for 1.5V ~ 3V range.
5. Turn off the receiver and disconnect the AC power cord (120V AC line).
While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear.
7. Select NO. 25 SB (Sub Brightness) with ▲ or ▼ key.
8. Adjust the data with + or key for 820mVDC.
9. Press the MENU key to turn off the Service Menu display.
Check brightness level on every active channel, readjust (repeat steps 5 ~ 9) if necessary).
Note: Do not set to excessive brightness level, otherwise the contrast level will be suppressed.

HIGH VOLTAGE HOLD-DOWN TEST

Every time the receiver is serviced, the HIGH VOLTAGE HOLD-DOWN circuit must be tested for proper operation by following these steps:

1. Connect receiver to 120V AC line. Tune receiver to active channel. Reset the picture controls to the Sports levels.
Check that the voltage measured between TP7 and TE7 (ground side) is within 16.5 VDC to 21 VDC. If the voltage is out of this range, the Hold-Down Circuit must be checked.
3. Connect a DC Voltage supply to TP7 and TE7 through a 100 ohm 1/4W resistor. Adjust the DC voltage to 23 VDC. The receiver should shutdown, losing raster and sound. Then the receiver should turn off automatically. This reaction indicates that the Hold-Down circuit is functioning properly. If the receiver does not shutdown, a malfunction is indicated and its cause must be found and corrected.
4. To obtain picture again, remove the DC Supply and wait a few minutes. Now turn on the receiver.

HIGH VOLTAGE CHECK

Note: +B (+130V) Voltage Check and Grayscale Adjustment must be completed before attempting High Voltage Check.
1. Connect high voltage voltmeter negative lead to ground, and connect + lead to anode of picture tube.
2. Tune receiver to an active channel and confirm TV is operating properly.
3. Eliminate the beam current by adjusting the contrast and brightness controls to minimum.
4. Confirm high voltage is within 29.0 KV and 31.0 KV. If reading is not within range, check horizontal circuit.

No high-voltage adjustment is provided on this chassis.

SOUND ADJUSTMENT

1. Connect Voltmeter lead to ground and + lead IC101 Pin 50 (TP20, FM DET OUT).
2. Tune receiver to an active channel.
3. Confirm D.V.M. reading of 3.85 ± 0.2 VDC.
4. If the voltage is out of this range, adjust Sound I.F. Transformer (T131) for 3.85 ± 0.2 VDC.

Page 18

SERVICE ADJUSTMENTS (Continued)

VIDEO LEVEL

1. Turn off the receiver and disconnect the AC power cord (AC 120V line).
2. Connect oscilloscope to TP16A and ground.
3. While pressing the Menu key, reconnect the AC power cord. The Service Menu will now appear.
4. Connect color bar generator to antenna terminals.
5. Select NO. 16 VL (Video Level) with the ▲ or ▼ key.
6. Adjust the + or key for an oscilloscope reading of 2.0 ± 0.2% VP-P at TP16A. Press the MENU key to turn off the Service Menu display.

MULTI-SOUND SECTION ADJUSTMENTS

Note: Multi-Sound Section must be adjusted after IC101 (Signal Processor), IC3401 (MTS Decoder), IC802 (EEPROM), or T131 (Sound I.F. transformer) is replaced.

INPUT LEVEL ADJUSTMENT

1. Turn off the receiver and disconnect the AC power cord (AC 120V line).
2. Connect voltmeter (RMS) to TP317 and ground.
3. While pressing the Menu key, reconnect the AC power cord. The Service Menu will now appear.
4. Select a channel with audio of 1 KHz 100% modulation.
5. Select NO. 32 ATT (Attenuation) with the ▲ or ▼ key.
6. Adjust the + or key for a voltmeter reading of 400 ± 5% mVrms at TP317.

SEPARATION ADJUSTMENT

7. Turn off the receiver and disconnect the AC power cord (AC 120V line).
8. Connect oscilloscope CH1 to TP317 and CH2 to TP318 and ground.
9. Connect an MTS TV/Stereo generator to antenna terminal.
10. While pressing the Menu key, reconnect the AC power cord. The Service Menu will now appear.
11. Select pilot, 300Hz audio frequency and Left modulating signal.
12. Select NO. 35 WDB (Wideband) with the ▲ or ▼ key.
Adjust the + or key for minimum low frequencies at TP317. (See Figure 7.)
14. Select 4 KHz audio frequency and Right modulating signal.
15. Select NO. 36 SPC (Spectral) with the ▲ or ▼ key.
Adjust the + or key for minimum high frequencies at TP318. (See Figure 7.)

Repeat adjustments (steps 11–16) until no further decreases in amplitude can be obtained. Press the MENU key to turn off the Service Menu display.

Figure 7. Separation Adjustments

PURITY AND CONVERGENCE ADJUSTMENTS

Purity and Convergence have been aligned at the factory. No re-alignment is necessary.

Page 19

SERVICE HINTS

POWER FAILURE DETECTOR

This unit is equipped with a Power Failure Detector function included in the CPU which checks for an abnormal condition in the chassis power supplies, including the power supply derived from the Horizontal Output Transformer.

If, while the power is on, a failure is caused by any of the following which results in a low voltage supply, the CPU will turn the unit off in 1.5 seconds to prevent unnecessary damage:

Failure within the power supply circuits.
A short circuit in the load side from the supply.
Stoppage of the Horizontal Output Oscillator caused by the X-Radiation protection Hold-Down Circuit.

If, while the power is off, the power is switched on and any of these failures remains uncorrected, the CPU will shut off the power within 3 seconds.

Check the following if the set is turned off by the power failure detector.

1. Disconnect the AC power cord (120V AC line) for at least 10 seconds.
2. Connect a DC Voltmeter to the following TEST POINTS.

3. Press the Power key and check for the proper voltage supplies.

4. If any of these voltages is low, the power failure detector should turn the unit off within 3 seconds.

5. Check all circuits listed above.

Note: This set is equipped with a Power Surge Protection feature included in the CPU. If power failure occurs three times within 15 minutes, the CPU will automatically stop functioning to help prevent secondary damage. (TV will not turn on by pressing the power key.) To reset the operating programs within the CPU, disconnect the AC power cord for at least 10 seconds.

Page 20

MECHANICAL DISASSEMBLIES

CABINET BACK REMOVAL

1. Refer to Figure 1, remove 12 screws.
2. Pull off cabinet back and remove.

Figure 1. Cabinet Back Removal

CHASSIS REMOVAL

1. Remove cabinet back.
2. Discharge the picture tube anode (2nd anode lead) to the dag coating (picture tube grounding lead).
3. Disconnect degaussing coil socket (KD), picture tube socket, deflection yoke connector (KX), speakers connector (KSP), picture tube ground lead, and 2nd anode lead.
4. Remove chassis completely by sliding it straight back.

PICTURE TUBE REMOVAL

CAUTION: Do not disturb the deflection yoke or magnet assembly on the picture tube neck. Care must be taken to keep these assemblies intact, unless picture tube is being replaced. Discharge the picture tube to the coating before handling the tube.

1. Remove chassis, referring to Chassis Removal instructions.
2. Place cabinet's front face down on a soft surface.
3. Remove the screw on each corner of the picture tube and GENTLY lift the picture tube out of the cabinet.
4. Install a replacement picture tube in reverse order. Properly install the degaussing coil and picture tube grounding lead on the picture tube. See Figure 2.

Note: If Picture Tube is being replaced, mount the Degaussing Coil properly on the tube. See Figure 2.

Figure 2. Picture Tube Removal

Page 21

CHASSIS ELECTRICAL PARTS LIST

CAUTION: To Protect against electrical shock and for continued product safety, refer to SAFETY PRECAUTIONS, X-RADIATION PRECAUTIONS, HIGH VOLTAGE HOLD-DOWN TEST, and PRODUCT SAFETY NOTICE on Page 2.

PRODUCT SAFETY NOTICE

PRODUCT SAFETY SHOULD BE CONSIDERED WHEN A REPLACEMENT IS MADE IN ANY AREA OF A RECEIVER. COMPONENTS INDICATED BY A STAR (*) IN THIS PARTS LIST AND THE SCHEMATIC DIAGRAM DESIGNATE COMPONENTS IN WHICH SAFETY CAN BE OF SPECIAL SIGNIFICANCE. IT IS PARTICULARLY RECOMMENDED THAT ONLY PARTS DESIGNATED ON THE FOLLOWING PARTS LIST BE USED FOR COMPONENT REPLACEMENT DESIGNATED BY A STAR. NO DEVIATIONS FROM RESISTANCE, WATTAGE, AND VOLTAGE RATINGS MAY BE MADE FOR REPLACEMENT ITEMS DESIGNATED BY A STAR.

Notes: Parts having Location Number are located on the following boards. Numbers under 700 Series ....................................


Numbers 800 Series	On the Main Board
Numbers 900 Series	Out of Board.
Numbers 1000 Series	On the Main Board
Numbers 1900 series	On the Main Board
Numbers 3400 series	On the Main Board

Note: Schematic part location numbers may not always match with the part descriptions. The part descriptions are correct and should be used.

Schematic Location	Part No.	Description	Schematic Location	Part No.	Desc	ription
	CAPACITORS		C001	403 049 0008	ELECT	1U M	50V
NOTES	•••••••		C002	403 049 0008	ELECT	1U M	50V
Read descripti	on of the Capacitor	as follows:	C003	403 074 7607	CERAMIC	5600P K	50V
			C004	403 074 7607	CERAMIC	5600P K	50V
(Example)			C005	403 047 8402	ELECT	0.1U M	50V
	100P K 50V	Rated Voltage	C007	403 044 9501	ELECT	100U M	25V
		rance Symbols:	C010	403 045 1504	ELECT	1000U M	25V
	less	than 10PF	C011	403 045 1504	ELECT	1000U M	25V
	A	Not specified	C015	403 045 7803	ELECT	220U M	25V
	В	±0.1PF C±0.25PF	C016	403 069 9500	CERAMIC	0.01U Z	50V
			C017	403 070 2606	CERAMIC	0.1U Z	50V
	S S	+0 - 0 25PF F +0 - 1PF	C101	403 039 3507	ELECT	470U M	6.3V
	mor	e than 10PF	C103	403 069 9500	CERAMIC	0.01U Z	50V
	Ā	Not specified	C106	403 050 6600	ELECT	3.3U M	50V
	B	±0.1% C±0.25%	C108	403 009 5708	CERAMIC	100P J	50V
	D	.±0.5% F±1%	C109	403 009 5708	CERAMIC	100P J	50V
		+5% K +10%	C131	403 049 0008	ELECT	1U M	50V
	L	.±15% M±20%	C133	403 069 9500	CERAMIC	0.01U Z	50V
	N	.±30% P+100 - 0%	C139	403 041 8804	ELECT	10U M	16V
	Q	.+30 - 10% T+50 - 10%	C141	403 069 9500	CERAMIC	0.01U Z	50V
		.+/5 - 10% V+20 - 10%	C142	403 062 7107	POLYESTER	0.056U K	50V
		+150 - 10% 7 +80 - 20%	C142	403 312 2609	POLYESTER	0.056U K	50V
	Rated Value:	PPico Farad UMicro Farad	C143	403 069 9500	CERAMIC	0.01U Z	50V
L Mat	terial:		C147	403 043 9106	ELECT	47U M	16V
CEF	AMIC Cer	amic	C151	403 048 6308	ELECT	0.47U M	50V
MI		alized Paper	C161	403 069 9500	CERAMIC	0.01U Z	50V
POL		alized Polyester	C166	403 020 0409	CERAMIC	27P J	50V
POL	YPROPoly	vpropylene	C202	403 069 9500	CERAMIC	0.01U Z	50V
MT	POLYPROMet	alized Polypropylene	C208	403 041 8804	ELECT	10U M	16V
COI	MPO-FILMCor	nposite Film	C211	403 049 0008	ELECT	1U M	50V
MT	-COMPO Met	talized Composite	C212	403 049 9803	ELECT	2.2U M	50V
SIY		rene talum Solid	C221	403 041 8804	ELECT	10U M	16V
		minum Solid	C252	403 060 8403	POLYESTER	0.033U K	50V
ELE	CTElec	ctrolytic	3202	403 312 1305	POLYESTER	0.033U K	50V
NP-	ELECTNor	n-Polarized Electrolytic	6253	403 049 9803	ELECT	2.2U M	50V
OS	SOLIDAlu- Ser	minum Solid with Organic niconductive Electrolytic	C256	403 041 4509	ELECT	470U M	10V

Page 22

Schematic	Part No.	Desc	ription		Schematic	Part No	De	cription
Location					Location			scription
C257	403 069 9500	CERAMIC	0.01U Z	50V	C487	403 052 8503	ELECT	1000U M	35V
C258	403 041 8804	ELECT	10U M	16V	C489	403 044 1703	ELECT	470U M	16V
C272	403 050 6600	ELECT	3.3U M	50V	C493	404 056 5307	NP-ELECT	2.2U M	100V
C300	403 069 9500	CERAMIC	0.01U Z	50V	C497	403 039 6508	ELECT	100U M	10V
C303	403 070 2606	CERAMIC	0.1U Z	50V	C502	403 053 2104	ELECT	220U M	35V
C304	403 043 9106	ELECT	47U M	16V	C503	403 204 1802	ELECT	3.3U K	50V
C306	403 028 4102	CERAMIC	56P J	50V	C504	403 045 9807	ELECT	2200U M	25V
C307	403 018 0503	CERAMIC	22P J	50V	C505	403 166 8000	MT-POLYES	ST 0.33U J	63V
C308	403 022 8205	CERAMIC	33P J	50V	C505	403 067 7300	MT-COMPO	0.33U J	50V
C309	403 041 8804	ELECT	10U M	16V	C506	403 059 0104	POLYESTEP	8 0.018U K	50V
C310	403 069 9500	CERAMIC	0.01U Z	50V		403 312 0100	POLYESTEF	0.018U K	50V
C312	403 048 6308	ELECT	0.47U M	50V	C509	403 166 7706	MT-POLYES	ST 0.47U J	63V
C313	403 069 9500	CERAMIC	0.01U Z	50V		403 067 7805	MT-COMPO	0.47U J	50V
C314	403 069 9500	CERAMIC	0.01U Z	50V	★ C511	403 057 2100	POLYESTEF	0.1U J	50V
C315	403 011 4904	CERAMIC	120P J	50V		403 311 8800	POLYESTEF	0.1U J	50V
C316	403 069 9500	CERAMIC	0.01U Z	50V		403 057 3107	POLYESTER	0.1U K	50V
C317	403 014 9203	CERAMIC	180P J	50V		403 311 8909	POLYESTEF	0.1U K	50V
C318	403 069 9500	CERAMIC	0.01U Z	50V	C516	403 041 8804	ELECT	10U M	16V
0322	403 069 9500	CERAMIC	0.01U Z	50V	★ C601	404 071 2404	MT-POLYES	ST 0.22U M	250V
0323	403 069 9500	CERAMIC	0.01U Z	50V		404 066 2204	MT-POLYES	ST 0.22U M	275V
0331	403 069 9500	CERAMIC	0.01U Z	50V	★ C608	403 266 5008	CERAMIC	2700P K	1K
0332	403 039 3507	ELECT	4700 M	6.3V	0000	403 232 0402	CERAMIC	2700P K	1K
0330	403 024 2102	CERAMIC	39P J	50V	C609	404 075 5005	ELECT	470U M	200V
0338		CERAMIC	0.10 Z	50V	C612	403 166 8208	MT-POLYES	T 0.18U J	63V
0341		CERAMIC	22P J	507	0010	403 067 6501	MI-COMPO	0.18U J	50V
0342			82P J	507	C613	403 214 5203	POLYESTER	0.012U J	50V
C343	403 009 5708			500	0000	403 311 9203	POLYESTER	0.012U J	50V
0344	403 009 9500		2.010 Z	507	6620	403 214 5203	PULYESTER	0.0120 J	500
0352	403 030 0000			507	0000	403 311 9203	PULYESTER	0.0120 J	500
C371	403 070 3308		1200P K	507		403 045 1504	ELEGI	10000 M	250
C401	403 040 0300	ELECT		351/	× 0020	403 203 0303		2200P K	IK 11/
C403	403 059 6205		0 02211 K	501/	CG2G	403 232 0204		2200P K	101
0400	403 312 0506		0.0220 K	50V	C628	403 043 1902		22000 IVI
C405	403 051 0607	FLECT	4 711 M	50V	C629	404 073 9003	ELECT	2200 M	160
C406	403 076 3607	CERAMIC	470P K	500V	0020	403 049 0202	FLECT	2200 W	501/
C407	403 076 0507	CERAMIC	2200P K	500V	★ C632		CERAMIC	2200P M	1251/
C408	403 103 0005	ELECT	4.7U M	160V	X 0002	404 046 5003	CERAMIC	22001 M	1251/
★ C411	404 077 4600	MT-POLYPR	)7800P H	1.5K		404 073 4604	CERAMIC	2200P M	2501/
	403 343 8205	MT-POLYPR	)7800P H	1.5KV	C634	403 043 9106	FLECT	4711 M	161/
★ C412	404 077 4600	MT-POLYPR	)7800P H	1.5K	C683	403 038 6301	ELECT	220U M	6 3V
	403 343 8205	MT-POLYPRO	)7800P H	1.5KV	C688	403 042 2405	ELECT	100U M	16V
★ C413	403 083 4307	POLYPRO	0.022U J	400V	C689	403 070 2606	CERAMIC	0.1U Z	50V
★ C414	403 083 3904	POLYPRO	0.018U J	400V	C693	403 047 8402	ELECT	0.1U M	50V
★ C416	404 081 2609	MT-POLYPR(	0.27U M	200V	C701	403 075 4803	CERAMIC	820P K	50V
	403 346 7126	MT-POLYPRO	) 0.27U J	250V	C711	403 074 9502	CERAMIC	680P K	50V
★ C417	404 081 2302	MT-POLYPRO	0.2U M	200V	C721	403 075 4803	CERAMIC	820P K	50V
	403 346 6822	MT-POLYPRO	) 0.2U J	250V	C741	403 049 0008	ELECT	1U M	50V
C419	403 158 9107	MT-POLYEST	2.2U K	100V	★ C742	403 077 2807	CERAMIC	1000P Z	2K
C421	403 038 6301	ELECT	220U M	6.3V	C801	403 069 9500	CERAMIC	0.01U Z	50V
C426	403 039 3507	ELECT	470U M	6.3V	C806	403 039 3507	ELECT	470U M	6.3V
C461	403 049 9803	ELECT	2.2U M	50V	C808	403 017 0900	CERAMIC	20P J	50V
C462	403 038 1603	ELECT	100U M	6.3V	C809	403 017 0900	CERAMIC	20P J	50V
C466	403 047 3100	ELECT	47U M	25V	C811	403 049 0008	ELECT	1U M	50V
C470	403 166 7706	MI-POLYEST	0.47U J	63V	C822	403 041 8804	ELECT	10U M	16V
0.400	403 067 7805	MI-COMPO	0.47U J	50V	C829	403 049 0008	ELECT	1U M	50V
0482	403 115 0802	ELECI	22U M	100V	C831	403 076 5304	CERAMIC	680P K	500V
0484	403 051 0607	ELEUI	4.7U M	50V	C832	403 062 0504	POLYESTER	0.047U K	50V
U480	403 076 3607	GERAMIC	470P K	500V		403 312 2203	POLYESTER	0.047U K	50V

Page 23

Schematic Location	Part No.	De	scription		Schematic Location	Part No.	Description
C835	403 069 9500	CERAMIC	0.01U Z	50V	D102	407 057 0104	ZENER DIODE RD5.6EB3 (5.6V)
C841	403 069 9500	CERAMIC	0.01U Z	50V	D311	407 099 5006	ZENER DIODE MTZJ4.7A (4.7V)
C842	403 069 9500	CERAMIC	0.01U Z	50V		407 056 7906	ZENER DIODE RD5.1EB1 (5.1V)
C843	403 069 9500	CERAMIC	0.01U Z	50V	D312	408 008 2406	DIODE 1N4148
C853	403 047 8402	ELECT	0.1U M	50V		407 013 4306	DIODE 1S2076A
C854	403 011 4904	CERAMIC	120P J	50V		407 013 7109	DIODE 1S2473
C856	403 049 0008	ELECT	1U M	50V	D351	407 099 6607	ZENER DIODE MTZJ12B (12V)
C857	403 018 7403	CERAMIC	220P J	50V		407 063 8408	ZENER DIODE MTZJ12C (12V)
C858	403 069 1702	CERAMIC	1000P K	50V		407 054 3207	ZENER DIODE RD12EB2 (12V)
C862	403 069 9500	CERAMIC	0.01U Z	50V		407 054 3306	ZENER DIODE RD12EB3 (12V)
C884	403 009 5708	CERAMIC	100P J	50V	D406	407 006 4108	DIODE ERB44-04
C1000	403 069 9500	CERAMIC	0.01U Z	50V	D407	407 095 8001	DIODE ERD07-15L
C1001	403 041 8804	ELECT	10U M	16V	★ D421	407 158 1307	ZENER DIODE HZ11B2L (11V)
C1002	403 042 7707	ELECT	22U M	16V	★ D422	407 158 1307	ZENER DIODE HZ11B2L (11V)
C1004	403 069 9500	CERAMIC	0.01U Z	50V	D428	407 099 7208	ZENER DIODE MTZJ16A (16V)
C1005	403 070 2606	CERAMIC	0.1U Z	50V		407 054 7007	ZENER DIODE RD16EB1 (16V)
C1006	403 041 8804	ELECT	10U M	16V	D429	408 008 2406	DIODE 1N4148
01011	403 069 9500	CERAMIC	0.01U Z	50V		407 013 4306	DIODE 1S2076A
01021	403 041 8804	ELECT	10U M	16V		407 013 7109	DIODE 1S2473
01081	403 043 9106	ELECT	470 M	16V	D463	408 008 2406	DIODE 1N4148
01082	403 069 9500	CERAMIC	0.010 Z	50V		407 013 4306	DIODE 1S2076A
01902					D 401	407 013 7109	DIODE 1S24/3
01910	403 009 9300			500	D481	407 124 6404	DIODE ERA18-04
03401	403 047 0402		U. TU IVI 4. 711 M	201		407 007 6606
C3404	403 000 0100			20V 50V	0400
C3400	403 070 0703	CERAMIC	5600P K	50V	D402	407 011 4407
C3408	403 048 6308	FLECT	0.4711 M	501	D400	407 124 0404
C3411	403 048 6308	FLECT	0.470 M	50V		407 007 0000
C3412	403 043 9106	FLECT	47U M	16V	D486	407 124 5500
C3413	403 046 9905	ELECT	4.7U M	25V	5,00	407 054 0008	ZENER DIODE RD10EB2 (10V)
C3414	403 042 2405	ELECT	100U M	16V	D487	407 005 8602	DIODE EBA15-02
C3416	403 086 0108	NP-ELECT	4.7U M	25V		407 088 6502	DIODE MPG06D
C3417	403 046 9905	ELECT	4.7U M	25V		407 011 3004	DIODE S5277B
C3418	403 086 0108	NP-ELECT	4.7U M	25V		408 009 9404	DIODE 1N4002ID
C3421	403 072 5605	CERAMIC	2700P K	50V	D489	408 008 2406	DIODE 1N4148
C3422	403 130 3109	CERAMIC	0.047U K	50V		407 013 4306	DIODE 1S2076A
C3423	403 342 9203	TA-SOLID	3.3U K	10V		407 013 7109	DIODE 1S2473
C3424	403 086 0108	NP-ELECT	4.7U M	25V	D493	407 063 9306	ZENER DIODE MTZJ7.5C (7.5V)
C3426	403 299 1820	TA-SOLID	10U K	10V		407 057 6502	ZENER DIODE RD7.5EB3 (7.5V)
C3427	403 049 0008	ELECT	1U M	50V	D501	407 005 8602	DIODE ERA15-02
C3431	403 073 9107	CERAMIC	4700P K	50V		407 088 6502	DIODE MPG06D
03432	403 047 8402	ELECT	0.1U M	50V		407 011 3004	DIODE S5277B
03433	403 073 9107	CERAMIC	4700P K	50V	0500	408 009 9404	DIODE 1N4002ID
03434	403 072 1607	GERAMIC	0.0220 K	50V	D503	407 100 0204	ZENER DIODE MTZJ36A (36V)
03435	403 040 9905		4.7U IVI	25V	L D001	407 056 2307	ZENER DIODE RD36EB1 (36V)
C3430	403 000 0100		4.70 W	237	★ D601	407 005 7605
C3439	403 040 9903		4.70 M	251		400 000 0000
C3442	403 000 0100	FLECT	4.70 M	25V 25V		407 013 3200
C3444	403 046 9905	FLECT	4.70 M	251/	A D002	407 003 7003
C3446	403 046 9905	FLECT	4.70 M	25V 25V		400 000 0000
C3448	403 046 9905	FLECT	4 711 M	25V	★ D603
				_0,	A 2000	408 008 8606	DIODE GP15G
						407 013 3200	DIODE 1S1887A
	DIODES				★ D604	407 005 7605	DIODE EM2B
D101	407 100 0204	ZENER DIOD	DE MTZJ36A	(36V)		408 008 8606	DIODE GP15G
	407 056 2307	ZENER DIOD	DE RD36EB1	(36V)		407 013 3200	DIODE 1S1887A
D102	407 063 8903	ZENER DIOD	DE MTZJ5.6C	(5.6V)

Page 24

Schematic Location	Part No.	Description		Schematic Location	Part No.	Description
D609	407 124 6503	DIODE ERA18-02	-	D1008	407 065 1308	ZENER DIODE MTZJ3.6B (3.6V)
	407 007 6903	DIODE ES1Z			407 056 4707	ZENER DIODE RD4.3EB2 (4.3V)
	407 124 5605	DIODE RMPG06D		D1009	407 065 1308	ZENER DIODE MTZJ3.6B (3.6V)
	408 009 9008	DIODE BYD33D			407 056 4707	ZENER DIODE RD4.3EB2 (4.3V)
D610	408 008 2406	DIODE 1N4148		D1011	407 099 6102	ZENER DIODE MTZJ10B (10V)
	407 013 4306	DIODE 1S2076A			407 054 0008	ZENER DIODE RD10EB2 (10V)
	407 013 7109	DIODE 1S2473		D1021	407 099 6102	ZENER DIODE MTZJ10B (10V)
D611	407 063 8903	ZENER DIODE MTZJ5.6C (5.6V)			407 054 0008	ZENER DIODE RD10EB2 (10V)
	407 057 0104	ZENER DIODE RD5.6EB3 (5.6V)		D1901	407 063 9306	ZENER DIODE MTZJ7.5C (7.5V)
★ D612	407 147 5705	PHOTO COUPLE ON3131S			407 057 6502	ZENER DIODE RD7.5EB3 (7.5V)
	407 104 2402	PHOTO COUPLE PC817C
	407 106 6101	PHOTO COUPLE PC817D
	407 175 9904	PHOTO COUPLE TLP621-1-BL
D614	408 008 2406	DIODE 1N4148		IC001	409 389 4607
	407 013 4306	DIODE 1S2076A		★ IC101	409 431 2100
	407 013 7109	DIODE 1S2473		10301	409 406 1107
★ D621	407 106 2806	DIODE RU3YX		★ IC501	409 340 1904
★ D624	407 211 6102	DIODE FE301-1L43		★ IC601	409 172 8102	IC SE13UNH
	407 129 6706	DIODE RU4YX LF-L1		10681	409 241 8309
★ D625	407 211 5808	DIODE FE201-6L43		10001	409 066 7303
	407 129 7000	DIODE RU4AM LF-L1		10801	410 354 9503
D627	408 008 2406	DIODE 1N4148		10802	409 470 3304
	407 013 4306	DIODE 1S2076A			409 370 1503
	407 013 7109	DIODE 1S2473		101001	409 333 3700
D629	407 099 7208	ZENER DIODE MTZJ16A (16V)		101001	409 001 3000
	407 054 7007	ZENER DIODE RD16EB1 (16V)		101001	409 001 3000
D680	408 008 2406	DIODE 1N4148		163401	409 407 1100	10 0AA2134Q-10
	407 013 4306	DIODE 1S2076A
Daga	407 013 7109	DIODE 1S2473			COILS
D683	408 008 2406			★ LF601	645 012 0589	LINE FILTER
	407 013 4306	DIUDE IS2076A			645 026 8274	LINE FILTER
D.007	407 013 7109	DIODE 182473		L164	645 003 9713	INDUCTOR, 15U K
D687	408 008 2406				645 016 2657	INDUCTOR, 15U K
	407 013 4300	DIODE 152070A		L166	645 003 9812	INDUCTOR, 33U K
D602	407 013 7109	7ENED DIODE MT716 28 (6 2)/)			645 016 2985	INDUCTOR, 33U K
D093	407 055 3402	ZENER DIODE RD6 2EB2 (6.2V)		L305	645 008 2894	INDUCTOR, 5.6U K
0604	407 007 2702	DIODE 1N4148			645 016 3104	INDUCTOR, 5.6U K
0034	400 000 2400			L306	645 003 9782	INDUCTOR, 22U K
	407 013 7109	DIODE 182473			645 016 2831	INDUCTOR, 22U K
D801	408 008 2406	DIODE 1N4148		L309	645 008 2894	INDUCTOR, 5.6U K
2001	407 013 4306	DIODE 1S2076A			645 016 3104	INDUCTOR, 5.6U K
	407 013 7109	DIODE 1S2473		L310	610 078 5946	PIPE CORE
D831	407 065 1308	ZENER DIODE MTZJ3.6B (3.6V)			652 000 1725	CORE, PIPE
	407 056 4707	ZENER DIODE RD4.3EB2 (4.3V)		L312	645 008 2894	INDUCTOR, 5.6U K
D834	407 099 8007	ZENER DIODE MTZJ20C (20V)			645 016 3104	INDUCTOR, 5.6U K
	407 055 1905	ZENER DIODE RD20EB3 (20V)		L332	645 003 9713	INDUCTOR, 15U K
D836	408 008 2406	DIODE 1N4148			645 016 2657	INDUCTOR, 150 K
	407 013 4306	DIODE 1S2076A		L341	645 008 2924	INDUCTOR, 8.20 K
	407 013 7109	DIODE 1S2473		1 404	645 016 3227
D843	408 008 2406	DIODE 1N4148		L401	645 017 7675	INDUCTOR, 3.30, FILTER
	407 013 4306	DIODE 1S2076A		L402	610 031 9998
	407 013 7109	DIODE 1S2473		L403	610 078 6820
D1001	407 099 6102	ZENER DIODE MTZJ10B (10V)		★ L413	645 U25 44U6
	407 054 0008	ZENER DIODE RD10EB2 (10V)		1 4	040 029 8035
D1002	407 099 6102	ZENER DIODE MTZJ10B (10V)		L414	010031130/
	407 054 0008	ZENER DIODE RD10EB2 (10V)		1 410	010211 3400 645 010 0676
D1006	407 099 6102	ZENER DIODE MTZJ10B (10V)		L410 \| 601	040 010 00/0 610 078 6990	PIPE CORE
	407 054 0008	ZENER DIODE RD10EB2 (10V)		LUUT	010 070 0020

Page 25

Schematic Location	Part No.	Description	Schematic Location	Part No.	Description
L621	610 078 5946	PIPE CORE		405 020 7501	TR 2SC945A-PA
	652 000 1725	CORE, PIPE		405 020 7709	TR 2SC945A-QA
L623	610 078 5946	PIPE CORE		405 020 7907	TR 2SC945A-RA
	652 000 1725	CORE, PIPE	Q202	405 011 8401	TR 2SC1740S-0
L625	610 078 5946	PIPE CORE		405 011 8500	TR 2SC1740S-R
	652 000 1725	CORE, PIPE		405 011 8609	TB 2SC1740S-S
L628	610 078 5946	PIPE CORE		405 012 2002	TB 2SC1815-GB
	652 000 1725	CORE, PIPE		405 012 2101	TB 2SC1815-0
L801	645 008 2894	INDUCTOR, 5.6U K		405 012 2309	TB 2SC1815-Y
	645 016 3104	INDUCTOR, 5.6U K		405 157 0505	TB 2SC536NF-NPA
L813	645 006 2490	INDUCTOR, 1U K		405 151 8705	TR 2SC536NG-NPA
	645 016 2411	INDUCTOR, 1U K		405 020 7501	TR 2SC945A-PA
L814	645 006 2490	INDUCTOR, 1U K		405 020 7709	TR 2SC945A-0A
	645 016 2411	INDUCTOR, 1U K		405 020 7907	TR 2SC945A-RA
L821	645 008 2894	INDUCTOR, 5.6U K	Q216	405 011 8401	TB 2SC1740S-0
	645 016 3104	INDUCTOR, 5.6U K		405 011 8500	TB 2SC1740S-B
L851	645 008 2894	INDUCTOR, 5.6U K		405 011 8609	TB 2SC1740S-S
	645 016 3104	INDUCTOR, 5.6U K		405 012 2002	TR 2SC1815-GR
L881	645 006 2490	INDUCTOR, 1U K		405 012 2101	TB 2SC1815-0
	645 016 2411	INDUCTOR, 1U K		405 012 2309	TR 2SC1815-Y
L882	645 006 2490	INDUCTOR, 1U K		405 157 0505	TR 2SC536NF-NPA
	645 016 2411	INDUCTOR, 1U K		405 151 8705	TR 2SC536NG-NPA
★ L901	645 030 7430	COIL, DEGAUSSING		405 020 7501	TR 2SC945A-PA
	645 041 1830	COIL, DEGAUSSING		405 020 7709	TR 2SC945A-QA
L1901	645 008 2894	INDUCTOR, 5.6U K		405 020 7907	TR 2SC945A-RA
	645 016 3104	INDUCTOR, 5.6U K	Q222	405 011 8401	TR 2SC1740S-Q
				405 011 8500	TR 2SC1740S-R
				405 011 8609	TR 2SC1740S-S
	TRANSISTOF	IS		405 012 2002	TR 2SC1815-GR
Q001	405 011 8401	TR 2SC1740S-Q		405 012 2101	TR 2SC1815-0
	405 011 8500	TR 2SC1740S-R		405 012 2309	TR 2SC1815-Y
	405 011 8609	TR 2SC1740S-S		405 157 0505	TR 2SC536NF-NPA
	405 012 2002	TR 2SC1815-GR		405 151 8705	TR 2SC536NG-NPA
	405 012 2101	TR 2SC1815-0		405 020 7501	TR 2SC945A-PA
	405 012 2309	TR 2SC1815-Y		405 020 7709	TR 2SC945A-QA
	405 157 0505	TR 2SC536NF-NPA		405 020 7907	TR 2SC945A-RA
	405 151 8705	TR 2SC536NG-NPA	Q225	406 000 6804	TR 2SA1015-GR(SAN)
	405 020 7501	TR 2SC945A-PA		405 001 7407	TR 2SA1015-0(SAN)
	405 020 7709	TR 2SC945A-QA		405 001 7605	TR 2SA1015-Y(SAN)
0101	405 020 7907	TR 2SC945A-RA		405 004 3109	TR 2SA564A-Q(CU)
Q101	405 011 8401	TR 2SC1740S-Q		405 004 3208	TR 2SA564A-R(CU)
	405 011 8500	TR 2SC1/40S-R		405 151 3304	TR 2SA608NF-NPA
	405 011 8609	TR 2SC1/40S-S		405 006 1707	TR 2SA933S-Q
	405 012 2002	TR 2SC1815-GR		405 006 1806	TR 2SA933S-R
	405 012 2101	TR 2SC1815-0	Q301	405 011 8401	TR 2SC1740S-Q
	405 012 2309	TR 2SC1815-Y		405 011 8500	TR 2SC1740S-R
	405 157 0505	TR 2SC536NF-NPA		405 011 8609	TR 2SC1740S-S
	405 151 8705	TR 2SC536NG-NPA		405 012 2002	TR 2SC1815-GR
	405 020 7501	TR 2SC945A-PA		405 012 2101	TR 2SC1815-0
	405 020 7709	TR 250945A-QA		405 012 2309	TR 2SC1815-Y
0105	405 020 7907	TR 250945A-RA		405 157 0505	TR 2SC536NF-NPA
Q135	405 011 8401	TR 2501/405-Q		405 151 8705	TR 2SC536NG-NPA
		TR 2501/405-K		405 020 7501	TR 2SC945A-PA
		1D 2001/400-0 TD 2001915 0D		405 020 7709	TR 2SC945A-QA
	405 012 2002	IN 2001010-0K		405 020 7907	TR 2SC945A-RA
	403 012 2101	10 2001010-U	Q306	405 011 8401	TR 2SC1740S-Q
	400 012 2009	TD 2001010-1 TD 200526NE NDA		405 011 8500	TR 2SC1740S-R
	400 107 0000			405 011 8609	TR 2SC1740S-S
	403 131 0/03	111 200000100-11PA		405 012 2002	IR 2SC1815-GR

Page 26

Schematic Location	Part No.	Description	Schematic Location	Part No.	Description
Q306 (Cont	.) 405 012 2101	TR 2SC1815-0		405 004 3109	TR 2SA564A-Q(CU)
	405 012 2309	TR 2SC1815-Y		405 004 3208	TR 2SA564A-R(CU)
	405 157 0505	TR 2SC536NF-NPA		405 151 3304	TR 2SA608NF-NPA
	405 151 8705	TR 2SC536NG-NPA		405 006 1707	TR 2SA933S-Q
	405 020 7501	TR 2SC945A-PA		405 006 1806	TR 2SA933S-R
	405 020 7709	TR 2SC945A-QA	Q372	406 000 6804	TR 2SA1015-GR(SAN)
	405 020 7907	TR 2SC945A-RA		405 001 7407	TR 2SA1015-0(SAN)
Q307	406 000 6804	TR 2SA1015-GR(SAN)		405 001 7605	TR 2SA1015-Y(SAN)
	405 001 7407	TR 2SA1015-0(SAN)		405 004 3109	TR 2SA564A-Q(CU)
	405 001 7605	TR 2SA1015-Y(SAN)		405 004 3208	TR 2SA564A-R(CU)
	405 004 3109	TR 2SA564A-Q(CU)		405 151 3304	TR 2SA608NF-NPA
	405 004 3208	TR 2SA564A-R(CU)		405 006 1707	TR 2SA933S-Q
	405 151 3304	TR 2SA608NF-NPA		405 006 1806	TR 2SA933S-R
	405 006 1707	TR 2SA933S-Q	Q401	405 013 6207	TR 2SC2271-D-CTV
	405 006 1806	TR 2SA933S-R		405 013 6306	TR 2SC2271-E-CTV
Q332	406 000 6804	TR 2SA1015-GR(SAN)	★ Q402	405 082 2407	TR 2SD1879-CTV-YB
	405 001 7407	TR 2SA1015-0(SAN)	Q461	405 011 8401	TR 2SC1740S-Q
	405 001 7605	TR 2SA1015-Y(SAN)		405 011 8500	TR 2SC1740S-R
	405 004 3109			405 011 8609	TR 25017405-5
	405 004 3208			405 012 2002	IR 2501815-6R
	405 151 3304	TR 2SA608NF-NPA		405 012 2309
		TR 25A9335-U		405 157 0505
0241		TR 25A9335-R		405 151 8705
Q341	403 011 6401	TR 25017405-Q		405 020 7501	TR 250945A-PA
	405 011 8500	TD 20017403-6	0462	403 020 7709
	405 011 8009	TR 25017405-5	Q402	405 004 7307	TR 2501274-Q-RA
	405 012 2002	TB 2SC1815-0	0486	405 023 5009	TB 2SD400-F-MP
	405 012 2309	TB 2SC1815-Y	a loo	405 023 5306	TR 2SD400-F-MP
	405 157 0505	TR 2SC536NF-NPA	★ Q601	405 095 9004	TB 2SC4423-CTV
	405 151 8705	TR 2SC536NG-NPA	Q604	405 058 0208	TR 2SC3807-R-CTV-YA
	405 020 7501	TR 2SC945A-PA	Q605	406 000 6804	TR 2SA1015-GR(SAN)
	405 020 7709	TR 2SC945A-QA		405 001 7407	TR 2SA1015-O(SAN)
	405 020 7907	TR 2SC945A-RA		405 001 7605	TR 2SA1015-Y(SAN)
Q342	405 011 8401	TR 2SC1740S-Q		405 004 3109	TR 2SA564A-Q(CU)
	405 011 8500	TR 2SC1740S-R		405 004 3208	TR 2SA564A-R(CU)
	405 011 8609	TR 2SC1740S-S		405 151 3304	TR 2SA608NF-NPA
	405 012 2002	TR 2SC1815-GR		405 006 1707	TR 2SA933S-Q
	405 012 2101	TR 2SC1815-0		405 006 1806	TR 2SA933S-R
	405 012 2309	TR 2SC1815-Y	Q627	405 089 0000	TR 2SA1707-S
	405 157 0505	TR 2SC536NF-NPA		405 089 0109	TR 2SA1707-T
	405 151 8705	TR 2SC536NG-NPA		405 009 6907	TR 2SB985-S
	405 020 7501	TR 2SC945A-PA	0.005	405 009 7003	1R 2SB985-1
	405 020 7709	TR 2SC945A-QA	Q635	405 011 8401	TR 2SC1740S-Q
0040	405 020 7907	TR 2SC945A-RA		405 011 8500	IR 2SC1740S-R
Q343	405 011 8401	TR 25017405-Q		405 011 8609	TR 25017405-5
	405 011 8500	TR 25017405-R		405 012 2002	TR 2501815-GR
	405 011 8609	TR 25017405-5		405 012 2101
	403 012 2002	TP 2001010-00		405 012 2309
	405 012 2101	TD 2001015-0		403 137 0303
	405 012 2309			405 151 0705
	405 151 8705	TB 280536NG-NPA		405 020 7301	TB 250945A-0A
	405 020 7501	TR 2809454-P4		405 020 7703	TB 280945A-BA
	405 020 7709	TB 2SC945A-0A	0681	405 011 8401	TB 2SC1740S-0
	405 020 7907	TB 2SC945A-BA	0001	405 011 8500	TB 2SC1740S-B
Q371	406 000 6804	TR 2SA1015-GR(SAN)		405 011 8609	TR 2SC1740S-S
~~· ·	405 001 7407	TR 2SA1015-0(SAN)		405 012 2002	TR 2SC1815-GR
	405 001 7605	TR 2SA1015-Y(SAN)		405 012 2101	TR 2SC1815-0

Page 27

Schematic Location	Part No.	Description
Q681 (Cont	.) 405 012 2309	TR 2SC1815-Y
	405 157 0505	TR 2SC536NF-NPA
	405 151 8705	TR 2SC536NG-NPA
	405 020 7501	TR 2SC945A-PA
	405 020 7709	TR 2SC945A-QA
	405 020 7907	TR 2SC945A-RA
Q688	406 000 6804	TR 2SA1015-GR(SAN)
	405 001 7605	TR 2SA1015-Y(SAN)
	405 004 3208	TR 2SA564A-R(CU)
	405 151 3304	TR 2SA608NF-NPA
0000	405 006 1806	TR 2SA933S-R
Q693	405 011 8401	TR 2SC1740S-Q
	405 011 8500	TR 2SC1740S-R
	405 011 8609	TR 2SC1/40S-S
	405 012 2002	TR 2501815-GR
	405 012 2101
	405 012 2309
	403 137 0303	TR 250536NF-NPA
	403 131 6703
	405 020 7501	TR 200940A-PA
	405 020 7703	TR 200940A-QA
0695	405 020 7 907	TR 200940A-NA TR 2001015-V(0ANI)
0000	405 001 7000	TR 25A564A-R(CH)
	405 004 0200	TB 254608-F-CTV-NP
Q701	406 000 3605	TB 2SC3620(LB-SAN-1)
a. e.	405 066 4304	TB 2SC2621-C-BA
	405 041 6507	TR 2SC2621-D-RA
	405 041 6705	TR 2SC2621-E-RA
	405 066 9903	TR 2SC2688(1)-K
	405 067 0008	TR 2SC2688(1)-L
	405 067 0107	TR 2SC2688(1)-M
Q711	406 000 3605	TR 2SC3620(LB-SAN-1)
	405 066 4304	TR 2SC2621-C-RA
	405 041 6507	TR 2SC2621-D-RA
	405 041 6705	TR 2SC2621-E-RA
	405 066 9903	TR 2SC2688(1)-K
	405 067 0008	TR 2SC2688(1)-L
	405 067 0107	TR 2SC2688(1)-M
Q721	406 000 3605	TR 2SC3620(LB-SAN-1)
	405 066 4304	TR 2SC2621-C-RA
	405 041 6507	TR 2SC2621-D-RA
	405 041 6705	TR 2SC2621-E-RA
	405 066 9903	TR 2SC2688(1)-K
	405 067 0008	TR 2SC2688(1)-L
0921	405 067 0107	TR 2502688(1)-M
0031		TR 25A1015-GR(SAN)
	405 001 7407	TR 25A1015-U(5AN)
	405 001 7005	TR 25A564A-0(011)
	405 004 3109	H1 20A004A-Q(UU) TR 2SΔ564Δ_P(CU)
	405 151 2200	ΤΠ 20A004A-Π(UU) ΤΒ 25Δ608ΝΕ-ΝΦΛ
	405 006 1707	ΤΠ 20Λ0000F-NFA ΤΒ 25Δ0335-Ω
	405 006 1806	TR 2549335-R
Q881	405 011 8401	TR 25C17405-0
~~~ '	405 011 8500	TB 2SC1740S-B
	405 011 8609	TR 2SC1740S-S
	405 012 2002	TR 2SC1815-GR
	405 012 2101	TR 2SC1815-0

Schematic Location	Part No.	Description
	405 012 2309	TR 2SC1815-Y
	405 157 0505	TR 2SC536NF-NPA
	405 151 8705	TR 2SC536NG-NPA
	405 020 7501	TR 2SC945A-PA
	405 020 7709	TR 2SC945A-QA
	405 020 7907	TR 2SC945A-RA
Q882	405 011 8401	TR 2SC1740S-Q
	405 011 8500	TR 2SC1740S-R
	405 011 8609	TR 2SC1740S-S
	405 012 2002	TR 2SC1815-GR
	405 012 2101	TR 2SC1815-0
	405 012 2309	TR 2SC1815-Y
	405 157 0505	TR 2SC536NF-NPA
	405 151 8705	TR 2SC536NG-NPA
	405 020 7501	TR 2SC945A-PA
	405 020 7709	TR 2SC945A-QA
	405 020 7907	TR 2SC945A-RA
Q1071	405 011 8401	TR 2SC1740S-Q
	405 011 8500	TR 2SC1740S-R
	405 011 8609	TR 2SC1740S-S
	405 012 2002	TR 2SC1815-GR
	405 012 2101	TR 2SC1815-0
	405 012 2309	TR 2SC1815-Y
	405 157 0505	TR 2SC536NF-NPA
	405 151 8705	TR 2SC536NG-NPA
	405 020 7501	TR 2SC945A-PA
	405 020 7709	TR 2SC945A-QA
	405 020 7907	TR 2SC945A-RA

NOTES:

Read description of the Resistor as follows:

CARBON 4.7K А 1/4W - Rated Wattage Performance Symbols: A...General B...Non-flammable Z...Low noise Other... Temperature coefficient Tolerance Symbols: A...0.05% B...0.1% C...25% D...0.5% F...1% G...2% J...5% K...10% M...20% P...+5 -15% Rated Value, ohms: K...1,000 M...1,000,000 Material^. CARBON .... Carbon MT-FILM Metal Film OXIDE-MT Oxide Metal Film SOLID ..... .Composition MT-GLAZE Metal Glaze WIRE WOUND ..... Wire Wo CERAMIC RES .... Ceramic Wire Wound FUSIBLE RES ..... Fusible R001 401 024 9701 CARBON 12K JA 1/6W R002 401 024 9701 CARBON 12K JA 1/6W R003 401 025 1605 CARBON 1.5K JA 1/6W R004 401 025 1605 CARBON 1.5K JA 1/6W

Page 28

Schematic Location	Part No.	Des	cription	Schematic Location	Part No.	Desc	ription
R008	401 026 9907	CARBON	4.7K JA 1/6W	R342	401 024 7004	CARBON	1K JA	1/6W
B011	401 026 3905	CARBON	330 JA 1/6W	R343	401 038 0701	MT-GLAZE	2.2K JA 1	/10W
R012	401 027 2600	CARBON	5.6K JA 1/6W	R347	401 037 5608	MT-GLAZE	10K JA 1	/10W
R101	401 026 6609	CARBON	390 JA 1/6W	R348	401 037 5608	MT-GLAZE	10K JA 1	/10W
★ R104	401 009 4806	CARBON	33 JA 1/2W	R349	401 024 7004	CARBON	1K JA	1/6W
R105	401 011 1107	CARBON	68 JA 1/2W	R351	401 026 9600	CARBON	470 JA	1/6W
R106	401 009 2000	CARBON	27K JA 1/2W	R352	401 038 0909	MT-GLAZE	220K JA 1	/10W
R133	401 037 6704	MT-GLAZE	1.2K JA 1/10W	R353	401 024 7400	CARBON	10K JA	1/6W
R136	401 027 8305	CARBON	820 JA 1/6W	R371	401 037 5608	MT-GLAZE	10K JA 1	/10W
R137	401 038 9001	MT-GLAZE	680 JA 1/10W	R372	401 038 3702	MT-GLAZE	33K JA 1	I/10W
R138	401 037 5004	MT-GLAZE	0.000 ZA 1/10W	R373	401 038 9407	MT-GLAZE	680K JA 1	1/10W
R142	401 038 3702	MT-GLAZE	33K JA 1/10W	R376	401 038 7809	MT-GLAZE	56K JA	1/10W
R143	401 037 5400	MT-GLAZE	1K JA 1/10W	R377	401 038 7700	MT-GLAZE	5.6K JA *	1/10W
R151	401 025 1308	CARBON	150 JA 1/6W	R400	401 038 3801	MT-GLAZE	330K JA -	1/10W
R159	401 025 7409	CARBON	220 JA 1/6W	R401	401 015 1608	CARBON	180 JA	1/4W
R161	401 037 9408	MT-GLAZE	180K JA 1/10W	R403	401 038 2101	MT-GLAZE	2.7K JA	1/10W
R162	401 038 0909	MT-GLAZE	220K JA 1/10W	R404	401 026 3905	CARBON	330 JA	1/6W
R163	401 038 0602	MT-GLAZE	220 JA 1/10W	R406	401 010 8305	CARBON	5.6K JA	1/200
R164	401 024 7004	CARBON	1K JA 1/6W	★ R407	401 068 4700	OXIDE-MI	4.7K JA	200
R167	401 025 2305	CARBON	150K JA 1/6W	R409	401 037 5004	MI-GLAZE	0.000 ZA	1/10W
R168	401 038 2309	MT-GLAZE	270K JA 1/10W	★ R413	402 067 3305	WIRE WOUN	D 4.7 KA	500
R169	401 037 5400	MT-GLAZE	1K JA 1/10W		402 075 5704		D 4.7 KA	500
R202	401 024 7004	CARBON	1K JA 1/6W	★ R418	401 009 1607	CARBON		1/200
R206	401 024 6700	CARBON	100 JA 1/6W	★ R421	401 148 /201
R207	401 037 5400	MT-GLAZE	1K JA 1/10W	★ R422	401 052 6802			1/07
R212	401 037 5806	MT-GLAZE	1M JA 1/10W	★ R423	401 053 2605		3.3N FA
R216	401 037 5608	MT-GLAZE	10K JA 1/10W	R426	401 038 9001			1/000
R217	401 027 5908	CARBON	68K JA 1/6W	R428	401 025 1902	CARBON	10K JA	1/6//
R221	401 037 5202	MT-GLAZE	100 JA 1/10W	R460	401 026 3905		220 JA	1/6\//
R222	401 037 5400	MI-GLAZE	1K JA 1/10W	R461	401 020 0007			1/0/
R223	401 038 0701	MT-GLAZE	2.2K JA 1/10W	K407	401 010 0303		680 IA	1/2/W
R224	401 038 3504	MT-GLAZE	330 JA 1/10W	K400	401 027 5205	CARBON	680.14	1/6W
R225	401 038 3504	MT-GLAZE		D471	401 027 3203	CARBON	56K JA	1/6W
R251	401 038 9209			R473 R474	401 027 3003	CARBON	180K JA	1/6W
R252	401 038 2101		2.7K JA 1/10W	R474	401 023 4303	CARBON	680 JA	1/6W
R271	401 036 0600		22K JA 1/10W	R480		CARBON	27 JB	1/2W
K272	401 030 3003		10K 1A 1/10W	+ R481	401 009 4905	CARBON	33 JB	1/2W
HZ/3	401 037 5008		12K 1A 1/10W	★ R481	401 011 9004	CARBON	1 JB	1/4W
D201	401 037 0003		3 3K IA 1/6W	★ B483	401 006 7701	CARBON	1 JB	1/2W
N201	401 020 4300	MT-GLAZE	180 JA 1/10W	B485	401 037 9309	MT-GLAZE	18K JA	1/10W
R288	401 037 9101	MT-GLAZE	180 JA 1/10W	★ R486	401 068 1600	OXIDE-MT	4.7 JA	2W
R280	401 037 9101	MT-GLAZE	180 JA 1/10W	R487	401 025 3807	CARBON	180 JA	1/6W
R301	401 037 5400	MT-GLAZE	1K JA 1/10W	★ R489	401 059 5907	OXIDE-MT	18 JA	1W
B302	401 037 7909	MT-GLAZE	1.5K JA 1/10W	R491	401 012 5708	CARBON	1K JA	1/4W
B303	401 038 7700	MT-GLAZE	5.6K JA 1/10W	R492	401 097 3903	MT-FILM	39K FA	1/6W
R304	401 037 5400	MT-GLAZE	1K JA 1/10W	R493	401 018 5801	CARBON	330K JA	1/4W
B305	401 037 5202	MT-GLAZE	100 JA 1/10W	R494	401 018 5801	CARBON	330K JA	1/4W
R306	401 024 7004	CARBON	1K JA 1/6W	★ R497	401 066 3002	OXIDE-MT	2.2 JA	2W
R307	401 037 7909	MT-GLAZE	1.5K JA 1/10W	★ R498	401 011 4306	CARBON	8.2 JA	1/2W
R308	401 037 5400	MT-GLAZE	1K JA 1/10W	R503	401 027 2600	CARBON	5.6K JA	1/6W
R309	401 027 5205	CARBON	680 JA 1/6W	R504	401 024 7400	CARBON	10K JA	1/6W
★ R310	401 010 2501	CARBON	47 JA 1/2W	R505	401 006 8401	CARBON	1.5 JA	1/2W
★ R311	401 010 2501	CARBON	47 JA 1/2W	R506	401 026 6609	CARBON	390 JA	1/6W
R312	401 039 0304	MT-GLAZE	820 JA 1/10W	R507	401 006 8807	CARBON	1.8 JA	1/2W
R332	401 038 9001	MT-GLAZE	680 JA 1/10W	R508	401 025 1902	CARBON	15K JA	1/6W
R333	401 037 7909	MT-GLAZE	1.5K JA 1/10W	R509	401 024 7400	CARBON	10K JA	1/6W
R334	401 024 7004	CARBON	1K JA 1/6W	★ R511	401 060 7402	OXIDE-MT	270 JA	1W
R341	401 024 7004	CARBON	1K JA 1/6W	R513	401 007 1104	CARBON	1K JA	1/2W

Page 29

Schematic Location	Part No.	Des	scription		Schematic Location	Part No.	D
R517	401 025 4606	CARBON	18K JA	1/6W	R814	401 037 5608	MT-GLAZE
R518	401 025 4606	CARBON	18K JA	1/6W	R816	401 038 3504	MT-GLAZE
★ R601	402 064 2905	WIRE WOUN	ID 1 KA	7W	R821	401 037 7909	MT-GLAZE
	402 072 3000	WIRE WOUN	ID 1 KA	7W	R822	401 037 9101	MT-GLAZE
★ R602	402 000 0705	SOLID	3.3M KA	1/2W	R823	401 024 9701	CARBON
R603	401 007 2309	CARBON	100K JA	1/2W	R826	401 038 6406	MT-GLAZE
★ R604	401 066 5204	OXIDE-MT	22 JA	2W	R827	401 038 7700	MT-GLAZE
★ R606	401 066 5204	OXIDE-MT	22 JA	2W	R828	401 026 4605	CARBON
★ R613	401 066 9103	OXIDE-MT	27 JA	2W	R831	401 037 5707	MT-GLAZE
R614	401 011 1107	CARBON	68 JA	1/2W	R833	401 024 7400	CARBON
R615	401 014 5201	CARBON	15K JA	1/4W	R835	401 026 1000	CARBON
R616	401 025 1506	CARBON	1.5K GA	1/6W	R842	401 027 2303	CARBON
R617	401 026 0904	CARBON	2.7K GA	1/6W	R843	401 027 2303	CARBON
★ R618	401 066 9103	OXIDE-MT	27 JA	2W	R844	401 027 2303	CARBON
R619	401 025 8208	CARBON	22K JA	1/6W	R846	401 037 5400	MT-GLAZE
R620	401 027 2600	CARBON	5.6K JA	1/6W	R847	401 027 2600	CARBON
R621	401 026 9907	CARBON	4.7K JA	1/6W	R848	401 027 2600	CARBON
R622	401 025 4101	CARBON	1.8K GA	1/6W	R849	401 027 2600	CARBON
R627	401 037 5608	MT-GLAZE	10K JA	1/10W	R851	401 037 5400	MT-GLAZE
B628	401 013 5301	CABBON	1.2K IA	1/4W	B852	401 038 5300	MT-GLAZE
R629	401 024 7004	CARBON	1K JA	1/6W	R853	401 037 5806	MT-GLAZE
★ B630	401 060 5002	OXIDE-MT	22K JA	1W	R854		MT-GLAZE
R631	401 022 3107	CARBON	6.8K.JA	1/4W	R856	401 037 5202	MT-GLAZE
R632	401 024 7004	CARBON	1K.\|A	1/6W	R857	401 037 5202	MT-GLAZE
R634	401 027 0309	CARBON	47K .1A	1/6W	R859	401 037 5608	MT-GLAZE
R683	401 027 0003	CARBON		1/6W	R862	401 007 5000
R687	401 025 3307	CARBON	22K IA	1/6W/	R864	401 024 0700	MT-GLAZE
R688	401 023 0200	MT-GLAZE	12K IA	1/10/0/	8872	401 000 0000
R691		CARBON		1/6W	R873	401 023 1302	MT-GLAZE
R692	401 024 7400	CARBON	68K IA	1/6W	R881	401 030 0000	MT-GLAZE
R603	401 027 3300	CARBON	560K IA	1/6\M	R882	401 037 5202
R694	401 027 3201	CARBON		1/6W	R883	401 037 5202
R034 R605	401 024 7400	CARRON	JOK JA	1/6/	D884	401 024 0700	CARBON
P701	401 025 0200		120 IA	1/6/	D886	401 024 0700
D700	401 023 3007		1 01/ 14	1/10/07	P1001	401 024 7400	CARBON
D702	401 037 0704		1.21 04	1/10/	R1001	401 027 0107	CARBON
R703 R704	401 037 0704		1.2N JA	1/6\M	R1002	401 027 0107	CARBON
n704 D706	401 027 0107			1/000	D1007	401 020 9000
	401 009 1508			1/2VV 2\M	D1011	401 030 0400
× n/0/	401 005 4004					401 027 0008
D710	401 023 3007			1/10/07	D1012	401 030 2200
D712	401 037 0704			1/10/0	D1013	401 024 9701
n/ IJ	401 037 0704			1/10/00	D1021	401 027 0107
D716	401 039 0203			1/1000	D1027	401 030 0400
	401 009 1000			1/200	R1032	401 030 2200
▼ H/ I/	401 005 4004				R1033	401 037 0003
K/21	401 025 3807				R1040	401 037 5608
R722	401 037 6704		1.2K JA		R1047	401 038 2200	MIT-GLAZE
R723	401 037 6704		1.2K JA		R1048	401 037 5608
K724	401 027 8107	CARBON	82 JA	1/6W	R1049	401 038 2200	MT-GLAZE
R726	401 009 1508	CARBON	2.7K JA	1/2W	R1071	401 038 6307	MIT-GLAZE
★ R/27	401 065 4604		12K JA	200	R1081	401 025 8208	CARBON
R803	401 037 5202	MI-GLAZE	100 JA	1/10W	R1082	401 038 0800	MI-GLAZE
K804	401 037 5202	MIT-GLAZE	100 JA	1/10W	K1901	401 024 7400	CARBON
K806	401 038 6406	MIT-GLAZE	4./K JA	1/10W	K1902	401 024 /004	UARBON
K807	401 037 5608	MT-GLAZE	10K JA	1/10W	R1903	401 037 9200	WII-GLAZE
R808	401 037 5608	MT-GLAZE	10K JA	1/10W	R1904	401 038 0701	MI-GLAZE
R809	401 038 6406	MT-GLAZE	4./K JA	1/10W	R1905	401 038 5102	MI-GLAZE
R810	401 024 7400	CARBON	10K JA	1/6W	R1906	401 038 7700	MI-GLAZE
R813	401 037 5608	MT-GLAZE	10K JA	1/10W	R1907	401 037 6803	MT-GLAZE

Description

10K JA 1/10W

330 JA 1/10W

1.5K JA 1/10W

180 JA 1/10W

12K JA 1/6W

4.7K JA 1/10W

5.6K JA 1/10W

33K JA 1/6W

100K JA 1/10W

10K JA 1/6W

2 7K JA 1/6W

560 JA 1/6W

560 JA 1/6W 560 JA 1/6W

1K JA 1/10W 5.6K JA 1/6W

5.6K JA 1/6W

1K JA 1/10W 39K JA 1/10W 1M JA 1/10W 2.2K JA 1/10W

100 JA 1/10W

10K JA 1/10W

100 JA 1/6W

39K JA 1/10W 15K JA 1/6W

22K JA 1/10W 100 JA 1/10W 100 JA 1/10W

100 JA 1/6W 100 JA 1/6W

10K JA 1/6W

82 JA 1/6W

470 JA 1/6W

4.7K JA 1/10W

75.JA 1/6W

27K JA 1/10W

12K JA 1/6W

4.7K JA 1/10W

27K JA 1/10W

12K JA 1/10W

10K JA 1/10W

27K JA 1/10W

10K JA 1/10W 27K JA 1/10W

470 JA 1/10W

22K JA 1/6W

22K JA 1/10W

10K JA 1/6W

1K JA 1/6W

1.8K JA 1/10W

2.2K JA 1/10W

3.9K JA 1/10W

5.6K JA 1/10W

12K JA 1/10W

82 JA 1/6W

Page 30

Schematic Location	Part No.	Description	S L
R1909	401 024 7004	CARBON 1K JA 1/6W
R1910	401 024 7004	CARBON 1K JA 1/6W
R3401	401 038 0602	MT-GLAZE 220 JA 1/10W	*
R3402	401 038 0602	MT-GLAZE 220 JA 1/10W
R3406	401 037 5707	MT-GLAZE 100K JA 1/10W
R3407	401 037 5806	MT-GLAZE 1M JA 1/10W
R3411	401 152 9604	MT-GLAZE 62K FA 1/10W	*
R3421	401 038 3603	MT-GLAZE 3.3K JA 1/10W
R3422	401 038 3009	MT-GLAZE 3K JA 1/10W
R3426	401 038 5102	MT-GLAZE 3.9K JA 1/10W
R3432	401 037 5608	MI-GLAZE 10K JA 1/10W
R3433	401 037 5608	MI-GLAZE 10K JA 1/10W
R3434	401 038 7601	MT-GLAZE 560 JA 1/10W
R3435	401 037 5707	MT-GLAZE 100K JA 1/10W	*
R3436	401 038 7601	MT-GLAZE 560 JA 1/10W
R3437	401 037 5707	MT-GLAZE 100K JA 1/10W
K344 I		MT-GLAZE 330K JA 1/10W
R3442	401 037 5202	MT-GLAZE TOU JA T/TOW
R3443	401 038 3801	MT-GLAZE 330K JA 1/10W	*
R3444	401 037 5202	MT-GLAZE 100 JA 1/10W
R3445	401 038 3801	MT-GLAZE 33UK JA 1/10W	*
R3446	401 037 5202	MT-GLAZE TUU JA T/TUW	*
R3447	401 038 3801	MT CLAZE 330K JA 1/10W
K3448	401 037 5202	WIT-GLAZE TUU JA T/TUW
	SWITCHES
SW1901	645 027 7382	SWITCH, PUSH (POWER)
SW1902	645 027 7382	SWITCH, PUSH (VOL +)
SW1903	645 027 7382	SWITCH, PUSH (VOL –)
SW1904	645 027 7382	SWITCH, PUSH (CH 🔺 )
SW1905	645 027 7382	SWITCH, PUSH (CH 🔻 )	*
SW1906	645 027 7382	SWITCH, PUSH (MENU)	*
	TRANSFORM	1/FRS
T131	645 027 6095	TRANS, IF 4.5MH7
T151	645 027 6088	TRANS, OSC 45.75MHZ
T401	610 000 1138	DRIVE TRANS
	610 223 1663	DRIVE TRANS
★ T402	645 032 8978	TRANS, FLYBACK
	645 018 9579	TRANS, FLYBACK
★ T601	645 040 1510	TRANS, POWER, PULSE
	CRVCTALC /	EILTERS
V1/1	421 006 2206
A141	421 000 3200	SAW FISF3221P
V152	421 000 9000
X133	645 020 1040
	645 041 1656
X161	610 015 3059
ATOT	645 041 1618	TRAP CERAMIC 4 5MH7
X251	610 204 /105
	610 204 4195 610 245 9746	CRYSTAL OSCILLATOR
	610 012 0655	CRYSTAL OSCILLATOR
X401	645 020 Q1/7	OSC CERAMIC 507 5KH7
	645 N22 1506	OSC. CERAMIC 503KHZ
X801	645 026 8434	OSC, CRYSTAL 8.000MHZ

Schematic Location	Part No.	Description
	MISCELLANEOUS
A100	610 285 7238	ASSY, PWB, MAIN
🕈 A101	645 040 5150	TUNER, U/V
A700	610 281 9472	ASSY, PWB, SOCKET
A1000	610 281 9434	ASSY, PWB, AV
A1901	645 027 4213	UNIT, REMOCON RECEIVER
← F601	423 018 8101	FUSE 125V 4A
	423 007 1601	FUSE 125V 4A
	423 007 1809	FUSE 125V 4A
F601A	645 000 5077	HOLDER, FUSE
	645 016 0479	HOLDER, FUSE
F601B	645 000 5077	HOLDER, FUSE
	645 016 0479	HOLDER, FUSE
★ K701	645 025 6103	SOCKET, CRT 8P
K1001	645 032 1979	JACK, RCA-3
K1002	645 032 1979	JACK, RCA-3
K1011	610 010 3665	JACK, RCA
K1021	610 010 3672	JACK, RCA
✤ PS601	408 006 7304	TH PTH631D01BF5R0M125
	408 010 7307	TH PTH631D10BF5R0M140
★ Q900	414 008 9901	CRT A80ECK272X54
RL601	645 000 4155	RELAY
	645 011 2713	RELAY
	645 024 7828	RELAY
	645 015 8629	RELAY
	645 024 7767	RELAY
SP901	645 013 6306	SPEAKER, 8
SP902	645 013 6306	SPEAKER, 8
VR461	645 003 5531	VR, SEMI, 10K N (H-CENT)
	645 011 6988	VR, SEMI, 10K N
	645 019 6003	VR, SEMI, 10K N
★ W601	645 034 8518	CORD, POWER
₩ 900	610 264 8362	ASSY, WIRE GND CONNECTOR
	610 267 0325	(MEX) GND CONNECTOR

Page 31

CABINET PARTS LIST

KEY NO.	PARTS NO.	DESCRIPTION
1	610 275 8351	CABINET FRONT ASSY
28 28	610 268 9655	CRT MTG WASHER 2.0MM (2-BOT)
3	412 053 3905	CRT MTG SCREW 6X35 (4 USED)
0R	412 054 0002	CRT MTG SCREW 6X35 (4 USED)
4	610 102 7151	DC HOLDER (4 USED)
5	610 281 9265	CABINET BACK
6	412 036 1805	SCREW 4X14 (12 USED)
OR	411 078 1101	SCREW 4X14 (12 USED)
7	610 283 7117	DEC AV SHEET
8	610 276 0170	BUTTON UNIT
9	610 265 3786	CAP RC
10	610 276 6356	DEC SHEET
11	610 236 9274	SANYO BADGE

ACCESSORY PARTS LIST

KEY NO.	PARTS NO.	DESCRIPTION
	645 032 6165	RC TRANSMITTER
	610 271 7143	RC BATTERY COVER
AVM-3259G	610 282 3356	OWNER'S MANUAL
AVM-3259S	610 282 3332	OWNER'S MANUAL

Page 32

COMPONENT AND TESTPOINT LOCATIONS

CAUTION

FOR CONTINUED PROTECTION AGAINST A RISK OF FIRE, REPLACE ONLY WITH THE SAME TYPE 4A, 125V FUSE.

ATTENTION : POUR MAINTENIR LA PROTECTION CONTRE LES RISQUES D' INCENDIE UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE 4A, 125V.

Page 33

Page 34

MODEL AVM-3259G MODEL AVM-3259S MODEL AVM-3260G

Chassis No. G5R-3259G4 Chassis No. G5R-3259S1 Chassis No. G7E-3260G0

BLOCK DIAGRAM

SCHEMATIC DIAGRAMS

NOTES ON SCHEMATIC DIAGRAMS

1. All resistance values in ohms K=1,000 M=1,000,000.

Unless otherwise noted on schematic, all capacitor values less than 1 are expressed in μF (Micro Farad), and the values more than 1 are in pF.
3. Unless otherwise noted on schematic, voltage reading taken with VOM from point indicated to chassis ground. Voltage reading taken using color-bar signal VHF channel 5, all controls at normal. Line voltage at 120 volts. Some voltages may vary with signal strength.
4. Waveforms were taken with color-bar signal and controls adjusted for normal picture. Waveforms marked with an * may vary with signal strength.
5. The Symbol (indicates a fusible resistor, which protects the circuit from possible short circuits.

SERVICE NOTES

1. When replacing parts on circuit boards, clamp the lead wires to terminals before soldering.
2. When replacing high wattage resistors on circuit board, keep the resistor body 10 mm (3/8) from circuit board.
3. Keep wires away from high voltage and high temperature components.

PRODUCT SAFETY NOTICE

THE COMPONENTS DESIGNATED BY A STAR (*) ON THIS SCHEMATIC DIAGRAM DESIGNATE COMPONENTS WHOSE VALUES ARE OF SPECIAL SIGNIFICANCE TO PRODUCT SAFETY. SHOULD ANY COMPONENT DESIGNATED BY A STAR NEED TO BE REPLACED, USE ONLY THE PART DESIGNATED IN THE PARTS LIST. DO NOT DEVIATE FROM THE RESISTANCE, WATTAGE AND VOLTAGE RATINGS SHOWN.

X-RADIATION WARNING NOTE THIS TV CONTAINS CRITICAL PARTS TO PROTECT AGAINST X-RADIATION. NOMINAL 2ND ANODE VOLTAGE IS 30.0KV AT ZERO BEAM CURRENT AT 120 VOLTS AC LINE. AND MUST NOT EXCEED 31.0KV UNDER ANY

VOLTAGE CHARTS

Page 35

WAVEFORMS

Page 36

/→ 12 x 10³ = 12K ohm

VOLTAGE CHARTS

NOTE: Voltages were measured using color bar signal and the controls adjusted for normal picture.

CAPACITOR AND	RESISTOR	CODE	CHART
VALACITOTIAND	HEORO I OIL		O 177 (111)

RESISTOR (Example)

















IC


IC

IC
Tic
IC
IC

IC
IC
IC
IC
IC
IC

IC

IC
IC


IC






L
L

Device/Pin #	Volts/Mode
IC101-34	3.5
IC101-35	3.5
IC101-36	0.4
IC101-37	5.1
IC101-38	3.5
IC101-39	3.6
IC101-40	3.3
IC101-41	3.2
IC101-42	4.2
IC101-43	3.3
IC101-44	3.3
IC101-45	3.5
IC101-46	GND
IC101-47	4.3
IC101-48	3.9
IC101-49	2.5
IC101-50	3.8
IC101-51	N.C.
IC101-52	4.6
IC301-1	GND
IC301-2	2.2
IC301-3	2.7
IC301-4	2.2
IC301-5	1.3
IC301-6	0
IC301-7	0
IC301-8	4.9
IC301-9	0
IC301-10	2.2
IC301-11	2.2
IC301-12	3.4
IC301-13	3.7
IC301-14	1.8
IC301-15	2.7
IC301-16	4.9
IC501-1	GND
IC501-2	14.4
IC501-3	27.1
IC501-4	3.8
IC501-5	3.8
IC501-6	26.2
IC501-7	2.8
IC601-1	GND
IC601-2	POWER ON: POWER OFF: 30.7 N/A
IC601-3	POWER ON: POWER OFF: 129 74.7

IC681-1 (IN) POWER ON: 11.6 POWER OFF: 7.3 IC802-1 IC681-2 (OUT) GND IC802-3 IC802-3 IC681-3 (OUT) POWER ON: 5.0 POWER OFF: IC802-7 IC802-4 IC801-1 4.1 IC802-6 IC801-2 4.73 IC802-7 IC801-3 4.9 IC802-7 IC801-4 0 IC1001-1 IC801-5 0 IC1001-2 IC801-7 0 IC1001-2 IC801-8 TV: 0 AV: 4.4 IC801-10 5.0 IC1001-5 IC801-11 0.2 IC1001-5 IC801-12 4.8 IC1001-10 IC801-13 0.3 IC1001-10 IC801-14 5.0 IC1001-11 IC801-15 2.1 IC1001-12 IC801-16 0.2 IC1001-11 IC801-17 2.2 IC1001-11 IC801-16 0.2 IC1001-11 IC801-17 2.2 IC1001-11 IC801-20 2.0 IC1081-1	Device/Pin #	Volts	/Mode	Device/Pin
(IN) 11.6 7.3 IC802-2 IC681-2 GND IC802-3 IC802-3 IC681-3 POWER ON: POWER OFF: IC802-4 (OUT) 5.0 5.0 IC802-5 IC801-1 4.1 IC802-6 IC802-7 IC801-2 4.73 IC802-7 IC802-7 IC801-3 4.9 IC802-8 IC1001-1 IC801-4 0 IC1001-1 IC802-8 IC801-5 0 IC1001-1 IC802-8 IC801-6 0 IC1001-1 IC1001-2 IC801-7 0 IC1001-1 IC1001-2 IC801-8 TV: 0 AV: 4.4 IC1001-6 IC801-10 5.0 IC1001-1 IC1001-1 IC801-11 0.2 IC1001-1 IC1001-1 IC801-12 4.8 IC1001-1 IC1001-1 IC801-13 0.3 IC1001-11 IC1001-11 IC801-14 5.0 IC1001-13 IC1001-12 IC801-17 2.2 IC	IC681-1	POWER ON:	POWER OFF:	IC802-1
IC681-2 GND IC802-3 IC681-3 POWER ON: POWER OFF: IC802-4 (OUT) 5.0 5.0 IC802-5 IC801-1 4.1 IC802-6 IC802-7 IC801-2 4.73 IC802-7 IC802-8 IC801-3 4.9 IC1001-1 IC802-8 IC801-6 0 IC1001-2 IC1001-2 IC801-7 0 IC1001-3 IC802-8 IC801-6 0 IC1001-1 IC1001-2 IC801-7 0 IC1001-3 IC1001-4 IC801-8 TV:0 AV: 4.4 IC1001-5 IC801-10 5.0 IC1001-7 IC1001-15 IC801-11 0.2 IC1001-10 IC1001-10 IC801-12 4.8 IC1001-10 IC1001-11 IC801-13 0.3 IC1001-12 IC1001-12 IC801-14 5.0 IC1001-13 IC1001-14 IC801-15 2.1 IC1001-14 IC1001-15 IC801-16 0.2 IC1001-14	(IN)	11.6	7.3	IC802-2
IC681-3 (OUT) POWER ON: 5.0 POWER OFF: 5.0 IC802-4 (R802-5) IC801-1 4.1 IC802-6 IC801-2 4.73 IC802-7 IC801-3 4.9 IC802-8 IC801-4 0 IC1001-1 IC801-5 0 IC1001-2 IC801-6 0 IC1001-2 IC801-7 0 IC1001-4 IC801-8 TV: 0 AV: 4.4 IC801-9 0 IC1001-5 IC801-10 5.0 IC1001-7 IC801-11 0.2 IC1001-8 IC801-12 4.8 IC1001-10 IC801-13 0.3 IC1001-11 IC801-14 5.0 IC1001-12 IC801-15 2.1 IC1001-13 IC801-17 2.2 IC1001-14 IC801-18 GND IC1001-12 IC801-17 2.2 IC1001-16 IC801-20 2.0 IC1081-1 IC801-21 GND IC1081-1 IC801-22 5.0 IC	IC681-2	GND		IC802-3
(OUT) 5.0 5.0 1C802-5 1C801-1 4.1 1C802-6 1C802-7 1C801-3 4.9 1C802-8 1C802-8 1C801-4 0 1C1001-1 1C802-8 1C801-5 0 1C1001-2 1C802-8 1C801-4 0 1C1001-2 1C802-8 1C801-5 0 1C1001-1 1C1001-2 1C801-7 0 1C1001-3 1C1001-4 1C801-8 TV: 0 AV: 4.4 1C1001-5 1C801-10 5.0 1C1001-6 1C1001-7 1C801-11 0.2 1C1001-10 1C1001-10 1C801-12 4.8 1C1001-10 1C1001-10 1C801-13 0.3 1C1001-10 1C1001-11 1C801-14 5.0 1C1001-12 1C1001-12 1C801-17 2.2 1C1001-13 1C1001-14 1C801-18 GND 1C1001-14 1C1001-15 1C801-20 2.0 1C1081-2 1C1081-3 1C801-24 GND	IC681-3	POWER ON:	POWER OFF:	IC802-4
IC801-1 4.1 IC802-6 IC801-2 4.73 IC802-7 IC801-3 4.9 IC802-8 IC801-4 0 IC1001-1 IC801-5 0 IC1001-2 IC801-7 0 IC1001-3 IC801-7 0 IC1001-4 IC801-8 TV: 0 AV: 4.4 IC1001-5 IC1001-5 IC801-10 5.0 IC1001-6 IC801-11 0.2 IC1001-7 IC801-12 4.8 IC1001-8 IC801-13 0.3 IC1001-10 IC801-14 5.0 IC1001-11 IC801-15 2.1 IC1001-12 IC801-16 0.2 IC1001-14 IC801-17 2.2 IC1001-14 IC801-17 2.2 IC1001-15 IC801-17 2.2 IC1001-14 IC801-20 2.0 IC1001-15 IC801-21 GND IC1081-3 IC801-22 5.0 IC1081-3 IC801-23 N.C	(OUT)	5.0	5.0	IC802-5
IC801-2 4.73 IC802-7 IC801-3 4.9 IC802-8 IC801-4 0 IC802-8 IC801-5 0 IC1001-1 IC801-6 0 IC1001-2 IC801-7 0 IC1001-3 IC801-8 TV: 0 AV: 4.4 IC1001-6 IC801-10 5.0 IC1001-7 IC1001-7 IC801-11 0.2 IC1001-7 IC1001-8 IC801-12 4.8 IC1001-7 IC1001-10 IC801-13 0.3 IC1001-10 IC1001-11 IC801-14 5.0 IC1001-12 IC1001-11 IC801-15 2.1 IC1001-12 IC1001-12 IC801-16 0.2 IC1001-13 IC1001-14 IC801-17 2.2 IC1001-14 IC1001-14 IC801-16 0.2 IC1001-15 IC1001-14 IC801-20 2.0 IC1081-3 IC1081-3 IC801-21 GND IC1081-3 IC1081-3 IC801-22 5.0 IC1081-5	IC801-1	4.1		IC802-6
IC801-3 4.9 IC802-8 IC801-4 0 IC1001-1 IC801-5 0 IC1001-2 IC801-6 0 IC1001-3 IC801-7 0 IC1001-4 IC801-8 TV: 0 AV: 4.4 IC1001-5 IC801-10 5.0 IC1001-7 IC1001-7 IC801-11 0.2 IC1001-7 IC1001-8 IC801-12 4.8 IC1001-9 IC1001-11 IC801-13 0.3 IC1001-12 IC1001-11 IC801-14 5.0 IC1001-12 IC1001-11 IC801-15 2.1 IC1001-12 IC1001-11 IC801-14 5.0 IC1001-12 IC1001-11 IC801-17 2.2 IC1001-14 IC1001-12 IC801-17 2.2 IC1001-14 IC1001-15 IC801-20 2.0 IC1081-13 IC1081-14 IC801-22 5.0 IC1081-3 IC1081-3 IC801-23 N.C. IC1081-3 IC1081-4 IC801-27 P	IC801-2	4.73		IC802-7
IC801-4 0 IC1001-1 IC801-5 0 IC1001-2 IC801-6 0 IC1001-3 IC801-7 0 IC1001-4 IC801-8 TV: 0 AV: 4.4 IC1001-5 IC1001-6 IC801-10 5.0 IC1001-7 IC801-11 0.2 IC1001-7 IC801-12 4.8 IC1001-10 IC801-13 0.3 IC1001-11 IC801-14 5.0 IC1001-12 IC801-15 2.1 IC1001-10 IC801-16 0.2 IC1001-11 IC801-17 2.2 IC1001-12 IC801-18 GND IC1001-15 IC801-19 2.2 IC1001-16 IC801-20 2.0 IC1001-16 IC801-21 GND IC1081-2 IC801-22 5.0 IC1081-3 IC801-23 N.C. IC1081-4 IC801-24 GND IC1081-7 IC801-25 5.0 IC1081-8 IC801-27	IC801-3	4.9		IC802-8
IC801-5 0 IC1001-2 IC801-6 0 IC1001-3 IC801-7 0 IC1001-4 IC801-8 TV: 0 AV: 4.4 IC1001-5 IC801-9 0 IC1001-7 IC1001-7 IC801-10 5.0 IC1001-7 IC1001-7 IC801-11 0.2 IC1001-7 IC1001-7 IC801-12 4.8 IC1001-9 IC1001-10 IC801-13 0.3 IC1001-11 IC1001-11 IC801-14 5.0 IC1001-12 IC1001-11 IC801-15 2.1 IC1001-13 IC1001-14 IC801-14 5.0 IC1001-13 IC801-14 IC001-14 IC801-17 2.2 IC1001-15 IC1001-15 IC1001-14 IC801-19 2.2 IC1001-16 IC1081-1 IC801-14 IC801-20 IC1081-1 IC801-20 2.0 IC1081-1 IC1081-2 IC1081-2 IC1081-3 IC801-22 5.0 IC1081-3 IC1081-15 IC1081-2 IC1081-16	IC801-4	0		IC1001-1
IC801-6 0 IC1001-3 IC801-7 0 IC1001-4 IC801-8 TV: 0 AV: 4.4 IC1001-5 IC801-9 0 IC1001-7 IC1001-7 IC801-10 5.0 IC1001-7 IC1001-7 IC801-11 0.2 IC1001-8 IC1001-7 IC801-12 4.8 IC1001-9 IC1001-10 IC801-13 0.3 IC1001-10 IC1001-11 IC801-14 5.0 IC1001-12 IC1001-11 IC801-15 2.1 IC1001-12 IC1001-13 IC801-16 0.2 IC1001-14 IC1001-15 IC801-17 2.2 IC1001-14 IC1001-15 IC801-19 2.2 IC1001-16 IC1081-1 IC801-20 2.0 IC1081-2 IC1081-2 IC801-21 GND IC1081-2 IC1081-3 IC801-25 5.0 IC1081-3 IC1081-7 IC801-27 POWER ON: POWER OFF: IC1081-8 IC801-28 1.7 IC1081-11	IC801-5	0		IC1001-2
IC801-7 0 IC1001-4 IC801-8 TV: 0 AV: 4.4 IC1001-5 IC801-10 5.0 IC1001-7 IC801-11 0.2 IC1001-7 IC801-12 4.8 IC1001-9 IC801-13 0.3 IC1001-10 IC801-14 5.0 IC1001-11 IC801-15 2.1 IC1001-12 IC801-16 0.2 IC1001-13 IC801-7 2.2 IC1001-14 IC801-7 2.2 IC1001-14 IC801-16 0.2 IC1001-14 IC801-17 2.2 IC1001-14 IC801-18 GND IC1001-15 IC801-19 2.2 IC1001-16 IC801-20 2.0 IC1081-2 IC801-21 GND IC1081-3 IC801-22 5.0 IC1081-3 IC801-23 N.C. IC1081-4 IC801-27 POWER ONE POWER OFF: IC801-28 1.7 IC1081-11 IC801-29 2.1 IC1	IC801-6	0		IC1001-3
IC801-8 TV: 0 AV: 4.4 IC1001-5 IC801-9 0 IC1001-6 IC1001-7 IC801-10 5.0 IC1001-7 IC1001-8 IC801-12 4.8 IC1001-9 IC1001-10 IC801-13 0.3 IC1001-11 IC1001-12 IC801-14 5.0 IC1001-11 IC1001-11 IC801-15 2.1 IC1001-12 IC1001-12 IC801-16 0.2 IC1001-13 IC1001-14 IC801-17 2.2 IC1001-14 IC1001-15 IC801-19 2.2 IC1001-16 IC1001-15 IC801-20 2.0 IC1081-1 IC1081-2 IC801-21 GND IC1081-3 IC1081-3 IC801-22 5.0 IC1081-4 IC1081-5 IC801-24 GND IC1081-7 IC1081-8 IC801-25 5.0 IC1081-7 IC1081-8 IC801-26 3.5 IC1081-8 IC1081-11 IC801-27 POWER ONE POWER OFF: IC1081-13 <	IC801-7	0		IC1001-4
IC801-9 0 IC1001-6 IC801-10 5.0 IC1001-7 IC801-11 0.2 IC1001-7 IC801-12 4.8 IC1001-9 IC801-13 0.3 IC1001-10 IC801-14 5.0 IC1001-11 IC801-15 2.1 IC1001-12 IC801-16 0.2 IC1001-13 IC801-17 2.2 IC1001-14 IC801-18 GND IC1001-15 IC801-19 2.2 IC1001-16 IC801-20 2.0 IC1081-1 IC801-21 GND IC1081-2 IC801-22 5.0 IC1081-3 IC801-23 N.C. IC1081-4 IC801-24 GND IC1081-5 IC801-25 5.0 IC1081-6 IC801-27 4.9 0 IC801-27 4.9 0 IC801-28 1.7 IC1081-8 IC801-33 4.9 IC1081-11 IC801-33 4.9 IC1081-12 IC801-	IC801-8	TV: 0	AV: 4.4	IC1001-5
IC801-10 5.0 IC1001-7 IC801-11 0.2 IC1001-8 IC801-12 4.8 IC1001-9 IC801-13 0.3 IC1001-10 IC801-14 5.0 IC1001-11 IC801-15 2.1 IC1001-12 IC801-16 0.2 IC1001-13 IC801-17 2.2 IC1001-14 IC801-18 GND IC1001-15 IC801-19 2.2 IC1001-16 IC801-20 2.0 IC1081-1 IC801-21 GND IC1081-2 IC801-22 5.0 IC1081-3 IC801-23 N.C. IC1081-4 IC801-24 GND IC1081-5 IC801-25 5.0 IC1081-6 IC801-27 POWER ON: POWER OFF: IC1081-7 IC1081-7 IC1081-8 IC801-27 POWER ON: POWER OFF: IC801-30 0 IC1081-11 IC801-31 4.9 0 IC1081-14 IC1081-14 <	IC801-9	0		IC1001-6
IC801-11 0.2 IC1001-8 IC801-12 4.8 IC1001-9 IC801-13 0.3 IC1001-10 IC801-14 5.0 IC1001-11 IC801-15 2.1 IC1001-12 IC801-16 0.2 IC1001-12 IC801-17 2.2 IC1001-14 IC801-18 GND IC1001-15 IC801-19 2.2 IC1001-16 IC801-20 2.0 IC1081-1 IC801-21 GND IC1081-2 IC801-22 5.0 IC1081-3 IC801-23 N.C. IC1081-4 IC801-24 GND IC1081-5 IC801-25 5.0 IC1081-6 IC801-27 POWER ON: POWER OFF: IC1081-7 IC1081-7 IC1081-8 IC801-27 POWER ON: POWER OFF: IC801-28 1.7 IC1081-11 IC801-30 0 IC1081-12 IC801-31 4.9 IC1081-13 IC801-32 3.4 IC1081-14	IC801-10	5.0		IC1001-7
IC801-12 4.8 IC1001-9 IC801-13 0.3 IC1001-10 IC801-14 5.0 IC1001-11 IC801-15 2.1 IC1001-12 IC801-16 0.2 IC1001-13 IC801-17 2.2 IC1001-14 IC801-18 GND IC1001-15 IC801-19 2.2 IC1001-16 IC801-20 2.0 IC1081-1 IC801-21 GND IC1081-2 IC801-22 5.0 IC1081-3 IC801-23 N.C. IC1081-4 IC801-24 GND IC1081-5 IC801-25 5.0 IC1081-6 IC801-26 3.5 IC1081-7 IC801-27 POWER ON: POWER OFF: IC801-28 1.7 IC1081-8 IC1081-9 IC1081-11 IC1081-12 IC801-29 2.1 IC1081-12 IC801-31 4.9 IC1081-13 IC801-32 3.4 IC1081-14 IC801-33 4.9 IC1081-15	IC801-11	0.2		IC1001-8
IC801-13 0.3 IC1001-10 IC801-14 5.0 IC1001-11 IC801-15 2.1 IC1001-12 IC801-16 0.2 IC1001-13 IC801-17 2.2 IC1001-14 IC801-18 GND IC1001-15 IC801-19 2.2 IC1001-16 IC801-20 2.0 IC1081-1 IC801-21 GND IC1081-2 IC801-23 N.C. IC1081-3 IC801-24 GND IC1081-4 IC801-25 5.0 IC1081-7 IC801-26 3.5 IC1081-8 IC801-27 POWER ON: POWER OFF: IC801-28 1.7 IC1081-8 IC801-29 2.1 IC1081-11 IC801-30 0 IC1081-12 IC801-31 4.9 IC1081-13 IC801-32 3.4 IC1081-14 IC801-33 4.9 IC1081-15 IC801-34 3.6 IC1081-16 IC801-35 5.0 IC3401-2	IC801-12	4.8		IC1001-9
IC801-14 5.0 IC1001-11 IC801-15 2.1 IC1001-12 IC801-16 0.2 IC1001-13 IC801-17 2.2 IC1001-14 IC801-18 GND IC1001-15 IC801-19 2.2 IC1001-16 IC801-20 2.0 IC1081-1 IC801-21 GND IC1081-2 IC801-22 5.0 IC1081-3 IC801-23 N.C. IC1081-4 IC801-24 GND IC1081-5 IC801-25 5.0 IC1081-6 IC801-26 3.5 IC1081-7 IC801-27 POWER ON: POWER OFF: IC801-27 POWER ON: POWER OFF: IC801-29 2.1 IC1081-10 IC801-29 2.1 IC1081-12 IC801-31 4.9 IC1081-13 IC801-32 3.4 IC1081-14 IC801-33 4.9 IC1081-15 IC801-34 3.6 IC1081-14 IC801-35 5.0 IC3401-2	IC801-13	0.3		IC1001-10
IC801-15 2.1 IC1001-12 IC801-16 0.2 IC1001-13 IC801-17 2.2 IC1001-14 IC801-18 GND IC1001-15 IC801-19 2.2 IC1001-16 IC801-20 2.0 IC1081-1 IC801-21 GND IC1081-2 IC801-22 5.0 IC1081-3 IC801-23 N.C. IC1081-4 IC801-24 GND IC1081-5 IC801-25 5.0 IC1081-6 IC801-26 3.5 IC1081-7 IC801-27 POWER ON: POWER OFF: IC801-27 POWER ON: POWER OFF: IC801-29 2.1 IC1081-10 IC801-30 0 IC1081-12 IC801-31 4.9 IC1081-13 IC801-32 3.4 IC1081-14 IC801-34 3.6 IC1081-15 IC801-34 3.6 IC1081-14 IC801-35 5.0 IC3401-1 IC801-37 5.0 IC3401-2	IC801-14	5.0		IC1001-11
IC801-16 0.2 IC1001-13 IC801-17 2.2 IC1001-14 IC801-18 GND IC1001-16 IC801-20 2.0 IC1081-1 IC801-21 GND IC1081-2 IC801-22 5.0 IC1081-3 IC801-23 N.C. IC1081-3 IC801-24 GND IC1081-4 IC801-25 5.0 IC1081-5 IC801-26 3.5 IC1081-7 IC801-27 POWER ON: POWER OFF: IC801-28 1.7 IC1081-8 IC1081-9 IC1081-11 IC1081-8 IC801-29 2.1 IC1081-8 IC801-30 0 IC1081-12 IC801-31 4.9 IC1081-13 IC801-32 3.4 IC1081-14 IC801-34 3.6 IC1081-15 IC801-35 5.0 IC3401-1 IC801-34 3.6 IC1081-16 IC801-37 5.0 IC3401-2 IC801-38 GND IC3401-3	IC801-15	2.1		IC1001-12
IC801-17 2.2 IC1001-14 IC801-18 GND IC1001-16 IC801-20 2.0 IC1081-1 IC801-21 GND IC1081-2 IC801-22 5.0 IC1081-3 IC801-23 N.C. IC1081-4 IC801-24 GND IC1081-3 IC801-25 5.0 IC1081-4 IC801-26 3.5 IC1081-6 IC801-27 POWER ON: POWER OFF: IC801-28 1.7 IC1081-8 IC1081-9 0 IC1081-9 IC801-27 POWER ON: POWER OFF: IC801-28 1.7 IC1081-8 IC1081-9 IC1081-10 IC1081-11 IC801-30 0 IC1081-12 IC801-31 4.9 IC1081-14 IC801-32 3.4 IC1081-15 IC801-34 3.6 IC1081-16 IC801-35 5.0 IC3401-1 IC801-37 5.0 IC3401-2 IC801-38 GND IC3401-3	IC801-16	0.2		IC1001-13
IC801-18 GND IC1001-15 IC801-19 2.2 IC1001-16 IC801-20 2.0 IC1081-1 IC801-22 5.0 IC1081-2 IC801-23 N.C. IC1081-3 IC801-24 GND IC1081-3 IC801-25 5.0 IC1081-3 IC801-26 3.5 IC1081-6 IC801-27 POWER ON: POWER OFF: IC1081-7 IC801-27 POWER ON: POWER OFF: IC1081-8 IC801-28 1.7 IC1081-9 IC1081-10 IC801-29 2.1 IC1081-10 IC1081-11 IC801-30 0 IC1081-12 IC1081-11 IC801-31 4.9 IC1081-12 IC1081-13 IC801-32 3.4 IC1081-14 IC1081-14 IC801-35 5.0 IC3401-1 IC3401-1 IC801-37 5.0 IC3401-3 IC3401-2 IC801-38 GND IC3401-3 IC3401-4 IC801-39 0.3 IC3401-5 IC3401-5	IC801-17	2.2		IC1001-14
IC801-19 2.2 IC1001-16 IC801-20 2.0 IC1081-1 IC801-21 GND IC1081-2 IC801-23 N.C. IC1081-3 IC801-24 GND IC1081-4 IC801-25 5.0 IC1081-5 IC801-26 3.5 IC1081-6 IC801-27 POWER ON: POWER OFF: IC801-28 1.7 IC1081-8 IC801-29 2.1 IC1081-10 IC801-29 2.1 IC1081-11 IC801-30 0 IC1081-12 IC801-31 4.9 IC1081-13 IC801-32 3.4 IC1081-14 IC801-33 4.9 IC1081-15 IC801-34 3.6 IC1081-14 IC801-35 5.0 IC3401-1 IC801-37 5.0 IC3401-2 IC801-38 GND IC3401-3 IC801-39 0.3 IC3401-4 IC801-41 0 IC3401-5 IC801-42 0 IC3401-7	IC801-18	GND		IC1001-15
IC801-20 2.0 IC1081-1 IC801-21 GND IC1081-2 IC801-22 5.0 IC1081-3 IC801-24 GND IC1081-4 IC801-25 5.0 IC1081-5 IC801-26 3.5 IC1081-6 IC801-27 POWER ON: POWER OFF: IC801-28 1.7 IC1081-7 IC801-29 2.1 IC1081-10 IC801-29 2.1 IC1081-11 IC801-30 0 IC1081-12 IC801-31 4.9 IC1081-11 IC801-32 3.4 IC1081-12 IC801-31 4.9 IC1081-13 IC801-32 3.4 IC1081-14 IC801-34 3.6 IC1081-15 IC801-35 5.0 IC3401-1 IC801-36 5.0 IC3401-2 IC801-37 5.0 IC3401-3 IC801-38 GND IC3401-4 IC801-39 0.3 IC3401-5 IC801-41 0 IC3401-6	IC801-19	2.2		IC1001-16
IC801-21 GND IC1081-2 IC801-22 5.0 IC1081-3 IC801-23 N.C. IC1081-4 IC801-24 GND IC1081-5 IC801-25 5.0 IC1081-6 IC801-26 3.5 IC1081-7 IC801-27 POWER ON: POWER OFF: IC801-28 1.7 IC1081-8 IC801-29 2.1 IC1081-10 IC801-29 2.1 IC1081-11 IC801-30 0 IC1081-12 IC801-31 4.9 IC1081-12 IC801-32 3.4 IC1081-14 IC801-33 4.9 IC1081-14 IC801-34 3.6 IC1081-14 IC801-35 5.0 IC3401-1 IC801-36 5.0 IC3401-2 IC801-37 5.0 IC3401-3 IC801-38 GND IC3401-4 IC801-40 0 IC3401-5 IC801-41 0 IC3401-6 IC801-42 0 IC3401-7	IC801-20	2.0		IC1081-1
IC801-22 5.0 IC1081-3 IC801-23 N.C. IC1081-4 IC801-24 GND IC1081-5 IC801-25 5.0 IC1081-6 IC801-26 3.5 IC1081-7 IC801-27 POWER ON: POWER OFF: IC1081-7 IC801-27 4.9 0 IC1081-7 IC801-28 1.7 IC1081-10 IC1081-10 IC801-29 2.1 IC1081-10 IC1081-11 IC801-30 0 IC1081-12 IC1081-12 IC801-31 4.9 IC1081-12 IC1081-14 IC801-32 3.4 IC1081-12 IC1081-14 IC801-33 4.9 IC1081-14 IC1081-14 IC801-34 3.6 IC1081-15 IC3401-14 IC801-35 5.0 IC3401-2 IC3401-2 IC801-37 5.0 IC3401-3 IC3401-4 IC801-39 0.3 IC3401-5 IC3401-4 IC801-41 0 IC3401-7 IC3401-6 IC801-42	IC801-21	GND		IC1081-2
IC801-23 N.C. IC1081-4 IC801-24 GND IC1081-5 IC801-25 5.0 IC1081-6 IC801-26 3.5 IC1081-7 IC801-27 POWER ON: POWER OFF: IC1081-7 IC801-28 1.7 IC1081-9 IC1081-9 IC801-29 2.1 IC1081-10 IC1081-11 IC801-30 0 IC1081-12 IC1081-11 IC801-31 4.9 IC1081-12 IC1081-11 IC801-32 3.4 IC1081-12 IC1081-13 IC801-31 4.9 IC1081-14 IC1081-15 IC801-32 3.4 IC1081-15 IC1081-14 IC801-33 4.9 IC1081-15 IC1081-16 IC801-34 3.6 IC1081-16 IC3401-1 IC801-35 5.0 IC3401-2 IC3401-2 IC801-37 5.0 IC3401-3 IC3401-4 IC801-39 0.3 IC3401-5 IC3401-5 IC801-41 0 IC3401-7 IC3401-7	IC801-22	5.0		IC1081-3
IC801-24 GND IC1081-5 IC801-25 5.0 IC1081-6 IC801-26 3.5 IC1081-7 IC801-27 POWER ON: POWER OFF: IC1081-8 IC801-28 1.7 IC1081-9 IC1081-10 IC801-28 1.7 IC1081-10 IC1081-11 IC801-29 2.1 IC1081-12 IC1081-12 IC801-30 0 IC1081-12 IC1081-13 IC801-31 4.9 IC1081-14 IC1081-15 IC801-32 3.4 IC1081-15 IC1081-15 IC801-33 4.9 IC1081-15 IC1081-16 IC801-34 3.6 IC1081-16 IC3401-1 IC801-35 5.0 IC3401-2 IC3401-2 IC801-37 5.0 IC3401-3 IC3401-3 IC801-38 GND IC3401-4 IC3401-5 IC801-40 0 IC3401-6 IC3401-7 IC801-42 0 IC3401-8 IC3401-8	IC801-23	N.C.		IC1081-4
IC801-25 5.0 IC1081-6 IC801-26 3.5 IC1081-7 IC801-27 POWER ON: POWER OFF: IC1081-8 IC801-28 1.7 IC1081-9 IC1081-10 IC801-29 2.1 IC1081-11 IC1081-12 IC801-30 0 IC1081-12 IC1081-12 IC801-31 4.9 IC1081-13 IC1081-14 IC801-32 3.4 IC1081-14 IC1081-14 IC801-33 4.9 IC1081-15 IC3401-1 IC801-35 5.0 IC3401-1 IC3401-2 IC801-37 5.0 IC3401-5 IC3401-4 IC801-39 0.3 IC3401-5 IC3401-6 IC801-41 0 IC3401-7 IC3401-8	IC801-24	GND		IC1081-5
IC801-26 3.5 IC1081-7 IC801-27 POWER ON: POWER OFF: IC1081-8 IC801-28 1.7 IC1081-10 IC801-29 2.1 IC1081-11 IC801-30 0 IC1081-12 IC801-31 4.9 IC1081-13 IC801-32 3.4 IC1081-14 IC801-33 4.9 IC1081-15 IC801-34 3.6 IC1081-16 IC801-35 5.0 IC1081-16 IC801-36 5.0 IC3401-1 IC801-36 5.0 IC3401-2 IC801-37 5.0 IC3401-3 IC801-39 0.3 IC3401-4 IC801-40 0 IC3401-5 IC801-41 0 IC3401-7 IC801-42 0 IC3401-7	IC801-25	5.0		IC1081-6
IC801-27 POWER ON: POWER OFF: IC1081-8 IC801-28 1.7 IC1081-10 IC801-29 2.1 IC1081-11 IC801-30 0 IC1081-12 IC801-31 4.9 IC1081-13 IC801-32 3.4 IC1081-14 IC801-33 4.9 IC1081-15 IC801-34 3.6 IC1081-16 IC801-35 5.0 IC3401-1 IC801-36 5.0 IC3401-2 IC801-37 5.0 IC3401-3 IC801-39 0.3 IC3401-4 IC801-40 0 IC3401-5 IC801-41 0 IC3401-7 IC801-42 0 IC3401-7	IC801-26	3.5		IC1081-7
4.3 0 1000000000000000000000000000000000000	IC801-27	POWER ON:	POWER OFF:	IC1081-8
IC801-28 I.7 IC1081-10 IC801-29 2.1 IC1081-11 IC801-30 0 IC1081-12 IC801-31 4.9 IC1081-13 IC801-32 3.4 IC1081-14 IC801-33 4.9 IC1081-15 IC801-34 3.6 IC1081-16 IC801-35 5.0 IC3401-1 IC801-36 5.0 IC3401-2 IC801-38 GND IC3401-3 IC801-39 0.3 IC3401-5 IC801-40 0 IC3401-7 IC801-42 0 IC3401-7	10001.20	4.3		101081-9
IC801-29 2.1 IC1081-11 IC801-30 0 IC1081-11 IC801-31 4.9 IC1081-13 IC801-32 3.4 IC1081-14 IC801-33 4.9 IC1081-15 IC801-34 3.6 IC1081-16 IC801-35 5.0 IC3401-1 IC801-36 5.0 IC3401-2 IC801-37 5.0 IC3401-3 IC801-38 GND IC3401-4 IC801-40 0 IC3401-5 IC801-41 0 IC3401-7 IC801-42 0 IC3401-8		1.7		101081-10
IC801-30 0 IC1081-12 IC801-31 4.9 IC1081-13 IC801-32 3.4 IC1081-14 IC801-33 4.9 IC1081-15 IC801-34 3.6 IC1081-16 IC801-35 5.0 IC3401-1 IC801-36 5.0 IC3401-2 IC801-37 5.0 IC3401-3 IC801-38 GND IC3401-4 IC801-40 0 IC3401-5 IC801-41 0 IC3401-7 IC801-42 0 IC3401-8	10801-29	2.1		101081-11
IC801-31 4.9 IC1081-13 IC801-32 3.4 IC1081-14 IC801-33 4.9 IC1081-15 IC801-34 3.6 IC1081-16 IC801-35 5.0 IC3401-1 IC801-37 5.0 IC3401-2 IC801-38 GND IC3401-4 IC801-40 0 IC3401-5 IC801-41 0 IC3401-6 IC801-42 0 IC3401-7		0		101081-12
IC801-32 3.4 IC1081-14 IC801-33 4.9 IC1081-15 IC801-34 3.6 IC1081-16 IC801-35 5.0 IC3401-1 IC801-37 5.0 IC3401-2 IC801-38 GND IC3401-4 IC801-39 0.3 IC3401-5 IC801-40 0 IC3401-6 IC801-41 0 IC3401-7 IC801-42 0 IC3401-7		4.9		101081-13
IC801-33 4.5 IC1081-15 IC801-34 3.6 IC1081-16 IC801-35 5.0 IC3401-1 IC801-36 5.0 IC3401-2 IC801-37 5.0 IC3401-3 IC801-38 GND IC3401-4 IC801-39 0.3 IC3401-5 IC801-40 0 IC3401-6 IC801-41 0 IC3401-7 IC801-42 0 IC3401-8		3.4
IC801-34 3.0 IC1081-16 IC801-35 5.0 IC3401-1 IC801-36 5.0 IC3401-2 IC801-37 5.0 IC3401-3 IC801-38 GND IC3401-4 IC801-39 0.3 IC3401-5 IC801-40 0 IC3401-6 IC801-41 0 IC3401-7 IC801-42 0 IC3401-8	10001-33	4.9
IC801-35 5.0 IC3401-1 IC801-36 5.0 IC3401-2 IC801-37 5.0 IC3401-3 IC801-38 GND IC3401-4 IC801-39 0.3 IC3401-5 IC801-40 0 IC3401-6 IC801-41 0 IC3401-7 IC801-42 0 IC3401-8		3.0
IC301-30 5.0 IC3401-2 IC801-37 5.0 IC3401-3 IC801-38 GND IC3401-4 IC801-39 0.3 IC3401-5 IC801-40 0 IC3401-6 IC801-41 0 IC3401-7 IC801-42 0 IC3401-7	10001-35	5.0
IC801-37 5.0 IC3401-3 IC801-38 GND IC3401-4 IC801-39 0.3 IC3401-5 IC801-40 0 IC3401-6 IC801-41 0 IC3401-7 IC801-42 0 IC3401-8	1001-30	5.0
IC801-38 GND IC3401-4 IC801-39 0.3 IC3401-5 IC801-40 0 IC3401-6 IC801-41 0 IC3401-7 IC801-42 0 IC3401-8	10001-37	0.0
IC801-39 0.3 IC3401-5 IC801-40 0 IC3401-6 IC801-41 0 IC3401-7 IC801-42 0 IC3401-8		GND
IC801-40 0 IC3401-6 IC801-41 0 IC3401-7 IC801-42 0 IC3401-8		0.3
IC801-41 0 IC3401-7 IC801-42 0 IC3401-8
		0		103401-7
		U		103401-8

IC3401-10

Page 37

↓ D429 (7V) (16V) ANODE LEAK DETECT.

Volts/Mode	Device/Pin #	Volts/Mode
VER ON: POWER OFF:	IC802-1	GND
11.6 7.3	IC802-2	GND
GND	IC802-3	GND
VER ON: POWER OFF:	IC802-4	GND
5.0 5.0	IC802-5	4.9
4.1	IC802-6	4.9
4.73	IC802-7	GND
4.9	IC802-8	5.0
0	IC1001-1	2.7
0	IC1001-2	0.9
0	IC1001-3	6.3
0	IC1001-4	6.2
TV: 0 AV: 4.4	IC1001-5	6.2
0	IC1001-6	GND
5.0	IC1001-7	GND
0.2	IC1001-8	GND
4.8	IC1001-9	0
0.3	IC1001-10	8.0
5.0	IC1001-11	8.0
2.1	IC1001-12	2.5
0.2	IC1001-13	2.4
2.2	IC1001-14	2.4
GND	IC1001-15	2.7
2.2	IC1001-16	9.1
2.0	IC1081-1	6.2
GND	IC1081-2	1.7
5.0	IC1081-3	2.7
N.C.	IC1081-4	2.6
GND	IC1081-5	2.6
5.0	IC1081-6	GND
3.5	IC1081-7	GND
VER ON: POWER OFF:	IC1081-8	GND
4.9 0	IC1081-9	0
1.7	IC1081-10	0
2.1	IC1081-11	0
0	101081-12	2.7
4.9	101081-13	2.4
3.4	101081-14	2.7
4.9	101081-15	1.7
3.0		9.1
5.U	103401-1	4.1
5.0	103401-2	4.1
5.0	103401-3	4.1

0.3		3.4
0	103401-0	3.3 CND
0	103401-7
v	103401-8	4.1
	103401-9	4.1
	103401-10	4.1
	103401-11	4.1

Device/Pin #	Volts/	/Mode
IC3401-12	4.9
IC3401-13	4.1
IC3401-14	1.3
IC3401-15	1.3
IC3401-16	0
IC3401-17	GND
IC3401-18	3.6
IC3401-19	9.1
IC3401-20	0
IC3401-21	4.1
IC3401-22	4.1
IC3401-23	3.7
IC3401-24	4.0
IC3401-25	4.1
IC3401-26	4.1
IC3401-27	4.1
IC3401-28	1.9
IC3401-29	4.1
IC3401-30	4.1
IC3401-31	2.0
IC3401-32	4.1
IC3401-33	4.1
IC3401-34	4.1
IC3401-35	4.1
IC3401-36	4.1
IC3401-37	4.1
IC3401-38	4.1
IC3401-39	4.1
IC3401-40	4.1
IC3401-41	4.1
IC3401-42	GND
IC3401-43	4.1
IC3401-44	4.1
IC3401-45	4.1
IC3401-46	GND
IC3401-47	4.1
IC3401-48	4.1
Q001-B	POWER ON: 0	POWER OFF: 0.7
Q001-C	POWER ON: 7.7	POWER OFF: 0
Q001-E	GND
Q101-B	5.7
Q101-C	6.9
Q.101-E	5.0
Q135-B	3.6
Q135-C	7.6
Q135-E	3.0
Q202-B	4.2
Q202-C	7.6
Q202-E	3.5

Device/Pin #	Volts/Mode	Device/
Q216-B	TV:0 AV: 0.6	0.001 0
Q216-C	TV:0.7 AV: 0	0601-B
Q216-E	GND	0.001.0
Q222-B	1.9	0601-0
Q222-C	6.1	Q601-E
Q222-E	1.3
Q225-B	6.1	0.004-0
Q225-C	2.1	0604-0
Q225-E	6.8	2004 0
Q301-B	0.6	Q604-E
Q301-C	4.1	Q605-B
Q301-E	GND
Q306-B	3.5	Q605-C
Q306-C	9.1
Q306-E	2.9	Q605-E
Q307-B
0307-0		Q627-B
0307-E	1.8
0332-B		Q627-C
0332-0
0241 B	2.7	Q627-E
0341-D	3.7
0341-C	29	Q635-B
0341-E	2.3
0342-C	4.8	Q635-C
Q342-E	1.8
Q343-B	TV: 0.7 AV: 0	Q635-E
Q343-C	TV: 0 AV: 0	0.004 0
Q343-E	GND	Q681-B
Q371-B	6.1	0691.0
Q371-C	GND	0001-0
Q371-E	3.5	Q681-E
Q372-B	3.0	0688-B
Q372-C	3.5	0000-D
Q372-E	3.5	0688-0
Q401-B	0.4	2000 0
Q401-C	37.3	0688-E
Q401-E	GND
Q402-B	3.8	Q693-B
0402-0	128.4
Q402-E	3.8	Q693-C
Q461-B	0.0
0461-0	9.2 GND	Q693-E
0462-8	92
0462-0	GND	Q695-B
0462-F	98	0695-0
0486-B	9.9
0486-C	10.1	Q695-E
Q486-E	9.1	L

Device/Pin #	Volts/Mode
	POWER ON:	POWER OFF:
Q601-B	-0.3	0
Q601-C	POWER ON: 161.4	POWER OFF: 169.6
Q601-E	GND
Q604-B	POWER ON: 1.6	POWER OFF: 0.6
Q604-C	POWER ON:	POWER OFF:
Q604-E	GND	: •	┝
Q605-B	POWER ON: 7.7	POWER OFF: 1.2
Q605-C	POWER ON: -0.3	POWER OFF: 0.6
Q605-E	POWER ON: 8.1	POWER OFF: 1.8
Q627-B	POWER ON: 10.8	POWER OFF: 7.3
Q627-C	POWER ON: 11.4	POWER OFF: 0.1
Q627-E	POWER ON: 11.6	POWER OFF: 7.3	[
Q635-B	POWER ON: 4.0	POWER OFF: 1.3
Q635-C	POWER ON: 30.5	POWER OFF: 9.3
Q635-E	POWER ON: 4.0	POWER OFF: 1.3
Q681-B	POWER ON: 0.7	POWER OFF: 0
Q681-C	POWER ON: 0	POWER OFF: 7.3
Q681-E	GND
Q688-B	POWER ON: 11.4	POWER OFF: 0.1
Q688-C	POWER ON: 0	POWER OFF: 0
Q688-E	POWER ON: 11.4	POWER OFF: 0.1
Q693-B	POWER ON: 0.5	POWER OFF: 6.2
Q693-C	POWER ON: 30.7	POWER OFF: 9.3
Q693-E	POWER ON: 0.7	POWER OFF: 5.7
Q695-B	POWER ON: 30.7	POWER OFF: 9.0
Q695-C	GND

POWER ON: POWER OFF: 30.8 9.3

Device/Pin #	Volts/Mode
Q701-B	3.0
Q701-C	147
Q701-E	2.6
Q711-B	3.0
Q711-C	144
Q711-E	2.8
Q721-B	2.7
Q721-C	143
Q721-E	2.6
Q831-B	4.3
Q831-C	4.9
Q831-E	4.9
Q881-B	0
Q881-C	4.7
Q881-E	GND
Q882-B	0
Q882-C	4.5
Q882-E	GND
Q1071-B	2.6
Q1071-C	9.1
Q1071-E	1.9

Page 38

Page 39

Page 40

Page 41

<del>-</del> 31 -

Page 42

For parts or service contact SANYO Fisher Service Corporation 21605 Plummer Street Chatsworth, CA 91311 (U.S.A.) 300 Applewood Crescent, Concord, Ontario L4K 5C7 (CANADA) June / 2000 / 2700 SMC

Printed in U.S.A.

SANYO Service manual / Схема, сервісна інструкція Service manual & schematics

1. IN THE CHASSIS ELECTRICAL PARTS LIST

1. IN THE CHASSIS ELECTRICAL PARTS LIST (Continued)

2. IN THE CABINET / ACCESSORY PARTS LIST

1. IN THE CHASSIS ELECTRICAL PARTS LIST

1. IN THE CHASSIS ELECTRICAL PARTS LIST

1. IN THE CHASSIS ELECTRICAL PARTS LIST (Continued)

1 IN THE CHASSIS FLECTRICAL PARTS LIST (Continued)

2. IN THE CABINET / ACCESSORY PARTS LIST

1 IN THE CHASSIS ELECTRICAL PARTS LIST

1. IN THE CHASSIS ELECTRICAL PARTS LIST (Continued)

Contents

Specifications

AVM-3259G, G5RTM, PRODUCT CODE 111341081 AVM-3259S, G5RVM, PRODUCT CODE 111341083

SAFETY INSTRUCTIONS

SAFETY PRECAUTIONS

ANTENNA COLD CHECK

LEAKAGE CURRENT CHECK

X-RADIATION PRECAUTION

HIGH VOLTAGE HOLD-DOWN TEST

PRODUCT SAFETY NOTICE

SERVICE ADJUSTMENTS

GENERAL

IC802 (EEPROM) REPLACEMENT

INITIAL BUS DATA SETUP

ON-SCREEN SERVICE MENU SYSTEM

1. Enter the Service Menu:

2. Service Adjustments:

3. Exit from the Service Menu:

Table 1. ON-SCREEN SERVICE MENU

SERVICE ADJUSTMENTS (Continued)

PROGRAM CODES

SERVICE ADJUSTMENTS (Continued)

ANTENNA CONNECTIONS

CIRCUIT PROTECTION

CAUTION

+B VOLTAGE CHECK

HORIZONTAL WIDTH ADJUSTMENT

HORIZONTAL CENTERING ADJUSTMENT

VERTICAL SIZE ADJUSTMENT

VERTICAL CENTERING ADJUSTMENT

GRAYSCALE ADJUSTMENT

Figure 4. Remote Control Number keys' function in Service Menu NO. 48

Figure 5. Remote Control Number keys' function in Service Menu NO. 47 DRV

FOCUS ADJUSTMENT

PLL TUNING ADJUSTMENT

RF-AGC ADJUSTMENT

BRIGHTNESS LEVEL ADJUSTMENT

HIGH VOLTAGE HOLD-DOWN TEST

HIGH VOLTAGE CHECK

SOUND ADJUSTMENT

SERVICE ADJUSTMENTS (Continued)

VIDEO LEVEL

MULTI-SOUND SECTION ADJUSTMENTS

INPUT LEVEL ADJUSTMENT

SEPARATION ADJUSTMENT

PURITY AND CONVERGENCE ADJUSTMENTS

SERVICE HINTS

POWER FAILURE DETECTOR

MECHANICAL DISASSEMBLIES

CABINET BACK REMOVAL

CHASSIS REMOVAL

PICTURE TUBE REMOVAL

CHASSIS ELECTRICAL PARTS LIST

PRODUCT SAFETY NOTICE

NOTES:

CABINET PARTS LIST

CABINET PARTS LIST

ACCESSORY PARTS LIST

COMPONENT AND TESTPOINT LOCATIONS

MODEL AVM-3259G MODEL AVM-3259S MODEL AVM-3260G

SCHEMATIC DIAGRAMS

NOTES ON SCHEMATIC DIAGRAMS

SERVICE NOTES

PRODUCT SAFETY NOTICE

VOLTAGE CHARTS

VOLTAGE CHARTS