Page 1
Ordering number : ENN6913A
2SA2040 / 2SC5707
2SA2040 / 2SC5707
Applications
•
DC / DC converter, relay drivers, lamp drivers, motor drivers, flash.
Features
• Adoption of FBET and MBIT processes.
•
Large current capacitance.
• Low collector-to-emitter saturation voltage.
• High-speed switching.
• High allowable power dissipation.
PNP / NPN Epitaxial Planar Silicon Transistors
High Current Switching Applications
Specifications ( ) : 2SA2040
Absolute Maximum Ratings at T a=25°C
Parameter Symbol Conditions Ratings Unit
Collector-to-Base Voltage V
Collector-to-Emitter Voltage V
Collector-to-Emitter Voltage V
Emitter-to-Base Voltage V
Collector Current I
Collector Current (Pulse) I
Base Current I
Collector Dissipation P
Junction T emperature Tj 150 ° C
Storage T emperature T stg --55 to +150 °C
CBO
CES
CEO
EBO
C
CP
B
C
Tc=25°C15W
Electrical Characteristics at T a=25°C
Parameter Symbol Conditions
Collector Cutoff Current I
Emitter Cutoff Current I
DC Current Gain h
Gain-Bandwidth Product f
CBO
EBO
FE
T
min typ max
VCB=(--)40V, IE=0A (--)0.1 µA
VEB=(--)4V, IC=0A (--)0.1 µA
VCE=(--)2V, IC=(--)500mA 200 560
VCE=(--)10V, IC=(--)500mA (290)330 MHz
Ratings
(--50)100 V
(--50)100 V
(--)50 V
(--)6 V
(--)8 A
(--)11 A
(--)2 A
1.0 W
Continued on next page.
Unit
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
62405EA MS IM TB-00001403 / 30101 TS IM TA-3233
No.6913-1/5
Page 2
2SA2040 / 2SC5707
Continued from preceding page.
Parameter Symbol Conditions
Output Capacitance Cob VCB=(--)10V, f=1MHz (50)28 pF
Collector-to-Emitter Saturation Voltage
Base-to-Emitterr Saturation Voltage VBE(sat) IC=(--)2A, IB=(--)40mA (--)0.83 (--)1.2 V
Collector-to-Base Breakdown Voltage V
Collector-to-Emitter Breakdown Voltage V
Collector-to-Emitter Breakdown Voltage V
Emitter-to-Base Breakdown Voltage V
Turn-On Time t
Storage Time t
Fall Time t
VCE(sat)1 IC=(--)3.5A, IB=(--)175mA (--230)160 (--390)240 mV
VCE(sat)2 IC=(--)2A, IB=(--)40mA (--240)110 (--400)170 mV
(BR)CBOIC
(BR)CESIC
(BR)CEOIC
(BR)EBOIE
on
stg
f
=(--)10µA, IE=0A (--50)100 V
=(--)100µA, RBE=0Ω (--50)100 V
=(--)1mA, RBE=∞ (--)50 V
=(--)10µA, IC=0A (--)6 V
See specified Test Circuit.
See specified Test Circuit.
See specified Test Circuit. 25 ns
min typ max
Package Dimensions Package Dimensions
unit : mm unit : mm
7518-003 7003-003
Ratings
(40)30
(225)420
Unit
ns
ns
6.5
0.85
0.7
0.6
12
5.0
4
2.3 2.3
3
0.8
1.5
5.5
1.6
7.07.5
Switching Time Test Circuit
I
I
V
R
100µF 470µF
B1
B2
R
B
+
+
PW=20µs
D.C.≤1%
INPUT
50Ω
2.3
0.5
1.2
0.5
OUTPUT
R
L
1 : Base
2 : Collector
3 : Emitter
4 : Collector
SANYO : TP
0.85
0.6
6.5
5.0
4
0.8
12
3
2.3 2.3
1.5
5.5
7.0
2.5
0.5
2.3
0.5
1.2
0 to 0.2
1.2
1 : Base
2 : Collector
3 : Emitter
4 : Collector
SANYO : TP-FA
VBE= --5V
VCC=25V
20IB1= --20IB2=IC=2.5A
For PNP, the polarity is reversed.
No.6913-2/5
Page 3
2SA2040 / 2SC5707
I
I
-- V
C
--7
2SA2040
--6
--60mA
--5
-- A
C
--4
--3
--100mA
CE
--90mA
--80mA
--70mA
--50mA
--40mA
--30mA
--20mA
7
90mA
6
5
-- A
C
100mA
4
3
C
-- V
CE
80mA
70mA
60mA
50mA
40mA
30mA
20mA
10mA
--2
Collector Current, I
--1
0
0 --0.4 --0.8 --1.2 --1.6 --2.0
Collector-to-Emitter Voltage, VCE -- V
I
-- V
--8
--7
--6
-- A
C
--5
--4
--3
--2
Collector Current, I
--1
0
0 --0.2 --0.4 --0.6 --0.8 --1.4--1.0 --1.2
C
Ta=75°C
25°C
BE
--25°C
Base-to-Emitter V oltage, VBE -- V
h
-- I
1000
FE
FE
7
5
3
2
Ta=75
25
°
--25°C
C
°
C
C
--10mA
IB=0mA
IT00206
2SA2040
VCE= --2V
IT00208
2SA2040
VCE= --2V
2
Collector Current, I
1
2SC5707
0
0
0.4 0.8 1.2 1.6 2.0
Collector-to-Emitter Voltage, VCE -- V
I
-- V
8
7
6
-- A
C
5
4
3
2
Collector Current, I
1
0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
C
Ta=75°C
25
BE
°C
°C
--25
Base-to-Emitter V oltage, VBE -- V
h
-- I
1000
FE
FE
7
5
3
2
Ta=75°C
25°C
--25°C
C
IB=0mA
IT00207
2SC5707
VCE=2V
IT00209
2SC5707
VCE=2V
100
7
5
DC Current Gain, h
3
2
10
--0.01
--1000
2SA2040
7
5
IC / IB=20
3
2
(sat) -- mV
--100
CE
7
5
3
2
--10
7
5
Collector-to-Emitter
Saturation V oltage, V
3
2
--1.0
--0.01 --0.1
325
73257 3257
Collector Current, IC -- A
VCE(sat) -- I
--1.0
IT00210
C
Ta=75°C
--25°C
23 57 23 57 23 57
Collector Current, IC -- A
25°C
--1.0 --10
IT00212
100
7
5
DC Current Gain, h
3
2
10
--10--0.1
0.01
1000
7
5
3
2
(sat) -- mV
100
CE
7
5
3
2
10
7
5
Collector-to-Emitter
Saturation V oltage, V
3
2
1.0
0.01 0.1
325
73257 3257
Collector Current, IC -- A
VCE(sat) -- I
1.0
IT00211
C
2SC5707
IC / IB=20
C
Ta=75°C
25
°
--25°C
23 57 23 57 23 57
Collector Current, IC -- A
1.0 10
IT00214
100.1
No.6913-3/5
Page 4
2SA2040 / 2SC5707
--10000
7
5
3
2
(sat) -- mV
--1000
CE
7
5
3
2
--100
7
5
Collector-to-Emitter
Saturation V oltage, V
3
2
--10
--0.01 --0.1
--10000
7
5
3
(sat) -- mV
2
BE
--1000
7
5
3
Base-to-Emitter
Saturation V oltage, V
2
VCE(sat) -- I
C
2SA2040
IC / IB=50
C
°
Ta=75
C
°
--25
23 57 23 57 23 57
Collector Current, IC -- A
VBE(sat) -- I
25°C
--1.0 --10
IT00213
C
2SA2040
IC / IB=50
Ta= --25°C
75°C
25°C
10000
7
5
3
2
(sat) -- mV
1000
CE
7
5
3
2
100
7
5
Collector-to-Emitter
Saturation V oltage, V
3
2
10
0.01 0.1
10000
7
5
3
(sat) -- mV
2
BE
1000
7
5
3
Base-to-Emitter
Saturation V oltage, V
2
VCE(sat) -- I
C
2SC5707
IC / IB=50
C
°
Ta=75
C
--25°
23 57 23 57 23 57
Collector Current, IC -- A
VBE(sat) -- I
25°C
1.0 10
IT00215
C
2SC5707
IC / IB=50
Ta= --25°C
75°C
25°C
--100
23 57 23 57 23 57
--0.01 --0.1 --1.0 --10
Collector Current, IC -- A
5
3
2
-- pF
100
7
5
3
2
10
7
Output Capacitance, Cob
5
3
2
5
23 37752375
--0.1
Collector-to-Base Voltage, V
1000
7
5
-- MHz
3
T
2
Cob -- V
--1.0 --10
f
T
-- I
CB
C
CB
-- V
2SA2040
f=1MHz
2SA2040
VCE= --10V
IT00216
25
IT00218
100
23 57 23 57 23 57
0.01 0.1 1.0 10
Collector Current, IC -- A
5
3
2
-- pF
100
7
5
3
2
10
7
Output Capacitance, Cob
5
3
2
23 3 357757
0.1
Collector-to-Base Voltage, V
1000
7
5
-- MHz
3
T
2
Cob -- V
1.0
f
T
-- I
CB
2
CB
10
-- V
C
2SC5707
VCE=10V
IT00217
2SC5707
f=1MHz
255
IT00219
100
7
5
3
2
Gain-Bandwidth Product, f
10
5
25773 25732573
--0.01
Collector Current, IC -- A
--0.1 --1.0 --10
IT00220
100
7
5
3
2
Gain-Bandwidth Product, f
10
5
25773 25732573
0.01
Collector Current, IC -- A
0.1 1.0 10
IT00221
No.6913-4/5
Page 5
2
ICP=11A
10
7
5
3
2
-- A
C
1.0
7
5
3
2
0.1
7
Collector Current, I
5
3
2
0.01
IC=8A
DC Operation (Ta=25
2SA2040 / 2SC5707
Tc=25°C
Single pulse
For PNP, the minus sign(--)is omitted
1.00.1 10 100
Collector-to-Emitter Voltage, VCE -- V
18
16
15
14
-- W
C
12
10
A S O
100ms
10ms
500µs
DC Operation (Tc=25
P
C
1ms
°
C)
-- Tc
2SA2040 / 2SC5707
2SA2040 / 2SC5707
100
µ
s
°
C)
253725372537
IT02971
1.2
1.0
-- W
C
0.8
0.6
0.4
Collector Dissipation, P
0.2
0
2006040 80 100 140120 160
Ambient Temperature, Ta -- °C
P
-- Ta
C
No heat sink
2SA2040 / 2SC5707
IT02972
8
6
4
Collector Dissipation, P
2
0
2006040 80 100 140120 160
Case Temperature, Tc -- °C
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
IT02973
This catalog provides information as of June, 2005. Specifications and information herein are subject
to change without notice.
No.6913-5/5
PS
Loading...