Sanyo SC 50,SC 50K,SC 51,SC T9200,SC T9200EM,SC T9200EMK,SC 9200E,SC 9200E-1,SC 9200E-2,SC 9200EK,SC 9200EMK Instruction Manual

INSTRUCTION
MANUAL

Siqjilmlo

SC 50/51/50K
SC T9200/EM/EMK
SC 9200E/E-l/E-2/EM/EK/EMK

VACUUM CLEANER

Thank you for your purchase of the Sanyo Vacuum Cleaner.
Please read these instructions carefully before using.

A FEW PRECAUTIONS

1. Operating without the filter in place will allow dust to enter the
motor and could damage the vacuum cleaner.

2. Keep the vacuum cleaner away from stoves and other heat sources.
Heat can deform and discolor the plastic parts of the unit.

3. Keep the vacuum cleaner free of insecticides. Do not wipe with
benzine, thinner, petrol or other oils which might cause discoloration
or cracking. To clean the body and hose, dampen a cloth with a mild
detergent and wipe clean.

4. Blocking the suction inlet or allowing the dust to clog the hose will
decrease the efficiency of the motor.

5. Be sure not to push the clamp button while carrying the vacuum
cleaner.

6. Never try to vacuum the following objects. They may damage the
unit or cause a fire.
* Wet things, mud, soil, and fluids
* Burning cigarettes
* Needles and razor blades
* Inflammable materials such as gasoline and thinner

7. The following kinds of treatment shorten hose life:
* Bending hose at an acute angle when storing
* Pulling the hose with excessive force
* Placing heavy objects on, or stepping on the hose

8. Pull out the plug from the power source after use. Grasp the plug –
not the cord – when pulling out the plug.

Pulling on the cord may lead to shortcircuiting.

9. Long and continuous use causes the exhaust air and the body of the

vacuum cleaner to become warm. This, however, does not denote
malfunction.

10. When vacuuming places that are very dusty, and also when vacuuming
regularly, empty the dust compartment before it becomes completely
filled.

Frequent emptying lengthens the life of the motor and maintains

strong suction power.

11. Do not insert fingers into the turbine brush suction slit while the
cleaner is operating. The turbine brush inside revolves at a high speed.

Do not insert fingers while motor is on. Be especially careful when

children are around. (SC T9200/T9200EM/T9200EM K)

12. Do not oil the turbine brush bearings. Oil can crack the plastic parts
around the bearings. (SC T9200/T9200EM/T9200 EMK)