When using an electrical appliance, basic precautions should always be
followed, including the following.
READ ALL INSTRUCTIONS
BEFORE USING THIS VACUUM CLEANER
WARNING - To reduce the risk of fire, electric shock or injury:
Do not leave appliance when plugged in. Unplug from outlet when not in use
and before servicing.
Do not use outdoors or on wet surfaces.
Do not allow to be used as a toy. Close attention is necessary when used by or
near children.
Use only as described in this manual. Use only the manufacturer's recommended
attachments.
Do not use with a damaged cord or plug. If appliance is not working as it should,
has been dropped, damaged, left outdoors, or dropped into water, return it to a
service center.
Do not pull or carry by the cord, use cord as a handle, close a door on cord, or
pull cord around sharp edges or corners. Do not run appliance over cord. Keep
cleaner over the cord. Keep the cord away from heated surfaces.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Do not handle plug or appliance with wet hands.
Do not put any object into the openings. Do not use with any opening blocked;
keep free of dust, lint, hair and anything that may reduce air flow.
Keep hair, loose clothing, fingers and all parts of body away from openings and
moving parts.
Do not pick up anything that is burning or smoking, such as cigarettes,
matches or hot ashes.
Do not use without filters in place.
Turn off all controls before unplugging.
Use extra care when cleaning on stairs.
Do not use to pick up flammable or combustible liquids such as gasoline, or
use in areas where they may be present.
Unplug before connecting any hose attachment accessory.
111
Do not touch the agitator while it is spinning.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade
is wider than the other). This plug will fit in a polarized outlet only one way. If the
plug dose not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not change the plug in any way.
SAVE THESE INSTRUCTIONS
This vacuum cleaner is intended for household use only.
2
FEATURES
CLEANS CARPETS AND OTHER FLOORING
Upholstery tool &
Dusting brush
Crevice tool
CLEANING IN NARROW SPACES AND HARD-TO-REACH
PLACES, SUCH AS UNDER BEDS, ETC.
TABLETOP CLEANING AND CLEANING OF SLIDING WINDOW
OR DOOR GROOVES, ETC.
Upholstery tool &
Dusting brush
Crevice tool
WALL-MOUNTABLE STORAGE
3
Upholstery tool &
Dusting brush
Crevice
tool
NAMES OF PARTS
SC-150 SC-180
Hole for
wall-mountable
storage
Grip
Hose holder
Hose
Button
Holding latch
ON/OFF switch
FRONT
Hole for
wall-mountable
storage
Grip
Hose holder
Hose
Button
Holding latch
ON/OFF switch
Lever
Floor nozzle
Crevice tool
Power cord
Clip
Cord storage
hook
Extension pipe
Upholstery tool &
Dusting brush
Turbine brush
REAR
WARNING:
Operate vacuum cleaner only at the voltage specified on nameplate.
4
ASSEMBLING THE VACUUM CLEANER
Caution: Do not connect the power plug to the wall socket until assembly is
completed.
Insert the hose into the main
12
unit.
Click into place
REMOVAL
Pull while pressing button.
Button
1
2
Fit the floor nozzle slot onto the
3
floor nozzle mount.
Floor nozzle slot
Floor nozzle
mount
Attach the extension pipes and the
floor nozzle as shown.
Match the imprinted numbers as
shown.
11
REMOVAL
Rotate the rings in the direction shown by
the arrows and pull pipes apart.
Set the holding latch into the
4
latch slot.
Button
Holding
latch
2 2
2
1
33
Ring
Latch slot
Hook the hose holder onto the
5
hose holder mount
Floor nozzle
mount
Caution: Do not lift or carry the vacuum cleaner by the hose or extension pipes. There is a hazard if
the hose or extension pipes become detached.
Be careful not to sandwich the electrical cord between the pipe and the main unit when
inserting the holding latch into the latch slot.
Hose holder
REMOVAL
Slide the button in
the direction shown
by the arrow.
Button
2
1
5
USING THE VACUUM CLEANER
ON/OFF SWITCH
Set the ON/OFF switch to " "to
1
operate the vacuum cleaner.
Set the ON/OFF switch to " "
2
to stop the vacuum cleaner.
POWER CORD
WINDING THE POWER CORD
Hook the power cord
1
over the clip which is
located on the upper
cord storage hook as
shown.
Clip
Wind the power cord around the cord
2
storage hooks.
UNWINDING THE POWER CORD
Rotate the upper
1
cord storage hook
downward.
Upper cord
storage hook
CREVICE TOOL
First, attach the main unit to the
extension pipes.
When the crevice tool is not in use
place it in the storage area
between the cord storage hooks.
Plug side
Crevice tool
Secure the power
cord plug on the
power cord.
Return the hook to
2
the upright position
before attempting
to rewind the
power cord.
2
1
6
USING THE VACUUM CLENER
UPHOLSTERY TOOL & DUSTING BRUSH(SC-180only)
Press the tabs downward to remove the dusting brush from the
upholstery tool.
Insert the front portion of the dusting brush into the groove located
inside the front of the upholstery tool.
Pull up on the tabs to reattach the dusting brush to the upholstery tool.
After use, fix to the extension pipe for storage as shown in the illustration.
TURBINE BRUSH (SC-180only)
Tabs
The turbine brush has a lever with two
positions.
FLOOR
RUG
Lever
RUG
Caution:
Do not touch the agitator while it is spinning.
Do not vacuum bare floors with lever in "rug" position. Doing so may damage the floor.
Do not leave the brush rotating for long periods over the same spot. Doing so may
damage the carpet.
FLOOR
This rug attachment has a small, built-in
turbine that is driven by the suction force
of the unit. The turbine drives a brush
inside the attachment to pick up fine
particles more efficiently.
Turbine
Brush
7
REPLACING THE PAPER BAG
Caution: Be sure to turn the ON/OFF switch to the " "position and disconnect
the power cord from the wall outlet when replacing the paper bag.
Always make sure the paper bag is installed properly before using.
Pull the dust cover to remove it.
12
Dust cover
Throw away the used paper bag.
3
Slide the bag collar of the new bag into
5
track completely.
4
6
Remove the paper bag.
Fold down both sides of the new bag.
Return the dust cover to its original
position.
Bag collar
Caution:
Be careful not to clamp the paper bag with the edge of the dust cover.
Always use genuine Sanyo paper bags to assure maximum performance.
Never use your vacuum cleaner without a paper bag.
Never use a broken bag or attempt to reuse old paper bags.
Obtaining new paper bags
You can obtain new paper bags form your nearest Sanyo dealer.
Be sure to specify only genuine Sanyo vacuum cleaner bags. If bags from
any other manufacturer are used, it may have adverse effects on vacuum
cleaner performance.
Track
SC-P11
8
PRODUCT MAINTENANCE
Caution: Be sure to turn the ON/OFF switch to the " "position and disconnect
the power cord from the wall outlet before cleaning.
MAIN UNIT
Wet a soft cloth with neutral
1
detergent solution and wring
out excess liquid.
TRAL
U
E
N
T
GEN
R
E
DET
Caution: Do not use organic solvents, including thinner, or other strong cleaning liquids
such as alkaline detergents. Use of such substances may cause discoloration or
deterioration of materials resulting in deformation or cracking.
Wipe the external surfaces
2
of the unit.
Wipe with a dry cloth.
3
CLEANING THE AGITATOR ASSEMBLY
When threads get caught in the agitator assembly, clean the assembly. (SC-180 only )
Remove threads caught in the agitor assembly
by cutting them with scissors.
Agitator assembly
Threads
ELECTROSTATIC MICRON FILTER
The electrostatic micron filter should be replaced at least once every 8 months in order
to maintain cleaning performance. Only use genuine Sanyo replacement filters.
Remove the dust cover and replace
1
the electrostatic micron filter.
Electrostatic micron filter
Caution: The electrostatic micron filter cannot be reused.
9
Replace the dust cover.
2
Dust cover
TROUBLESHOOTING
If there is a problem with the vacuum cleaner, carry out the following checks
to find the cause. If the problem still persists after the checks have been
made, do not use the vacuum cleaner to prevent the possibility of an accident
occurring. Turn the ON/OFF switch to the " " position, disconnect the power
cord from the wall outlet, and contact the place of purchase or your nearest
Sanyo self-servicing dealer, or call(toll-free) 1-800-421-5013 (USA Only).
Problem
Motor does not operate when
the switch is depressed to the
"ON" position.
Suction does not improve
after replacing the bag.
The agitator dose not operate.
(SC-180 only)
Is the cord plugged completely into the power outlet?
-Check the connection of the cord into the power outler for
complete insertion.
Is the cord damaged where it is connected to the plug, or are
you pulling on the cord too hard or bending it?
-Have the cord replaced at a Sanyo self-servicing dealer or a
Sanyo service station.
Is the electrostatic micron filter dirty?
-Replace the electrostatic micron filter.
Is the turbine brush or the hose clogged?
-If so, clean it out.
The lever is not set to the RUG position?
-Set the lever to the RUG position.
Is the turbine brush or the hose clogged?
-If so, clean it out.
Possible cause
REPLACEMENT PARTS
Be sure to use only genuine Sanyo replacement parts.
Paper bags, electrostatic micron filters and other replacement parts can be
obtained from your nearest Sanyo dealer.
If there is on Sanyo dealer in your vicinity, please contact a Sanyo service
center or call(toll-free) 1-800-5013 (USA Only).
Part Name & lllustration
SC-P11
Paper bag
SC-F2
Electrostatic micron filter
10
SANYO UPRIGHT VACUUM CLEANER LIMITED WARRANTY
OBLIGATIONS
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo
Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. The names
and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.
For product operration, authorized service senter referral, service assistance or problem resolution,call
(USA ONLY)
CUSTOMER INFORMATION 1-800-421-5013
Weekdays 8:00 AM - 5:00 PM Pacific Time
www. sanyoservice. com
For accessories and/or parts not available from an authorized dealer, call
PARTS ORDER INFORMATION 1-800-726-9662
Weekdays 8:00 AM - 5:00 PM Pacific Time
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF
AMERICA. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL USER AND DOES NOT APPLY TO
PRODUCTS USED FOR ANY INDUSTRIAL, PROFESSIONAL OR COMMERCIAL PURPOSE. THE ORIGINAL DATED
BILL OF SALE OR SALES SLIP MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE CENTER AT THE
TIME WARRANTY SERVICE IS REQUESTED.
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO FISHER COMPANY (SFC) warrants this
SANYO products against defects in materials and workmanship for the periods of LABOR and PARTS
specified below. SFC will repair or replace (at its option) the product and any of its parts which fail to conform
to this warranty.
The warranty period commences on the date the product was first purchased at retail
LABOR
PARTS
MOTOR
1YEAR 1YEAR 2YEAR
EXCLUSIONS
This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate
model's instruction manual, or (B) the repair of any product whose serial number has been altered, defaced
or removed.
This warranty shall not apply to the following items: non-electrical / mechanical attachments; accessories;appearance
items; disposable parts such as filters, paper bags, belts, headlight lamps and agitator brushes.
This warranty shall not apply to setup, installation, removal or the product for repair or reinstallation of the
product after repair.
This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC
including, but not limited to, any malfunction, defect or failure caused by or resulting from unauthorized
service or parts, improper maintenance, operation contrary to furnished instructions, shipping or transit
accidents, modification or repair by the user, abuse, misuse, neglect, accident, incorrect power line voltage,
fire, flood or other Acts of God, or normal wear and tear.
The foregoing is in lieu of all other expressed warranties and SFC does not assume or authorize any party to
assume for it any other obligation or liability.
THE DURATION OF ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW (INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS) IS LIMITED TO THE TERM OF THIS WARRANTY. IN NO EVENT
SHALL SFC BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM
OWNERSHIP OR USE OF THIS PRODUCT, OR FOR ANY DELAY IN THE PREFORMANCE OF ITS OBLIGATIONS
UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE.
For your protection in the event of theft or loss of this product, please fill in the information below for your
own personal records.
Model No. Serial No.
Date of Purchase Purchase Price
(Located on back or bottom side of unit)
Where Purchased
9BF-D-P111-00440 0109- 0
E
21605 Plummer Street.
Chatsworth, CA 91311
www. sanyo. com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.