Ordering number:EN2936A
SB007W03C
Schottky Barrier Diode (Twin Type · Cathode Common)
30V, 70mA Rectifier
Applictions
· High frequency rectification (switching regulators, converters, choppers).
Features
· Low forward voltage (Vmax=0.55V).
F
· Fast reverse recovery time (t max=10ns). rr
·Low switching noise.
·Low leakage current and high reliablity due to highly reliable planar structure.
Package Dimensions
unit:mm
1169A
[SB007W03C]
1:Anode
2:Anode
3:Cathode
SANYO:CP
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter |
Symbol |
Conditions |
Ratings |
Unit |
|
|
|
|
|
Repetitive Peak Reverse Voltage |
VRRM |
|
30 |
V |
Non-repetitive Peak Reverse Surge Voltage |
VRSM |
|
35 |
V |
Average Output Current |
IO |
|
70 |
mA |
Surge Forward Current |
IFSM |
50Hz sine wave, 1 cycle |
2 |
A |
Junction Temperature |
Tj |
|
–55 to +125 |
˚C |
|
|
|
|
|
Storage Temperature |
Tstg |
|
–55 to +125 |
˚C |
|
|
|
|
|
Electrical Characteristics at Ta = 25˚C
Parameter |
Symbol |
Conditions |
|
Ratings |
|
Unit |
|
|
|
||||
|
|
|
min |
typ |
max |
|
|
|
|
|
|
|
|
Reverse Voltage |
VR |
IR=20µA |
30 |
|
|
V |
Forward Voltage |
VF |
IF=70mA |
|
|
0.55 |
V |
Reverse Current |
IR |
VR=15V |
|
|
5 |
µA |
Interterminal Capacitance |
C |
VR=10V, f=1MHz |
|
3.0 |
|
pF |
Reverse Recovery Time |
trr |
IF=IR=10mA, See specified Test Circuit |
|
|
10 |
ns |
Thermal Resistance (1) |
Rth(j-a)1 |
|
|
620 |
|
˚C/W |
Thermal Resistance (2) |
Rth(j-a)2 |
Mounted on Cu-foild area of |
|
430 |
|
˚C/W |
|
|
16mm2×0.2mm on glass epoxy board |
|
|
|
|
Marking : K |
|
|
|
|
|
|
trr Test Circuit |
|
Electrical Connection |
|
|
|
|
1:Anode
2:Anode
3:Cathode
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE, Tokyo Bldg., 1-10 , Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
62098HA (KT)/D1096GI/1269TA, TS No.2936-1/2
SB007W03C
No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss.
Anyone purchasing any products described or contained herein for an above-mentioned use shall:
Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use:
Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of June, 1998. Specifications and information herein are subject to
change without notice.
PS No.2936-2/2